INKEL Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of New Sub Treasury Building .
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_INKEL_267003_1Bid Award Id
ViewTender No
NIT/INKEL/TIDP/2018-19/041Tender Authority
INKEL Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Chipping carefully cut off portion of piles as required without any damage to the piles and dressing the top and removing debris away from the site without any extra cost as directed including the cost of all tools, plants, conveyance, labour, lead, lift etc. complete as directed by the Engineer in Charge
11
-
4018.79
Extra for boring in hard strata (Where N100) weathered / disintegrated /soft rock /rock and socketing as per drawing .500mm dia Pile.
29
-
2323
Extra for boring in hard strata (Where N100) weathered / disintegrated /soft rock /rock and socketing as per drawing .600mm dia Pile.
49
-
2903.75
Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile upto 50 tonne capacity Initial test
1
-
57086.89
Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Group of two or more piles upto 50 tonne capacity Initial test.
1
-
83395
Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).500 mm dia piles
331
-
2602.32
Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).600 mm dia piles
497
-
2215.42
Sub Head 3 - Earthwork
-
-
-
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil
501
-
78.46
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
251
-
186.46
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
93
-
246.34
Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock
10
-
408.37
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
65
-
186.16
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
700
-
460.78
Sub Head 4 -Plain Cement Concrete Works
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
40
-
6629.45
Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
2
-
9693.22
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .
10
-
1.41
Sub Head 5 -Reinforced Cement Concrete Works
-
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
85
-
9543.4
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
120
-
10732.97
Add for using extra cement in the items of design mix over and above the specified cement content therein
103
-
995.94
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
150
-
287.12
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
118
-
560.48
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
149
-
625.17
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
477
-
507.63
Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
251
-
692.61
Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
111
-
772.4
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more
21018
-
83.79
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
15782
-
83.79
Sub Head 6 - Block work
-
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 Grade C for foundation and plinth with wall thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
10
-
5356.06
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 Grade C for super structure up to floor two level with wall thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
113
-
5871.53
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 Grade C for super structure up to floor two level with wall thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
20
-
6082.25
Sub Head 7 -Joinery/False Ceiling/Partition Works
-
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness
5
-
3041.33
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer of approved make (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
8
-
574.99
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness of approved make. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
57
-
615.11
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
16
-
3238.15
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:250x16mm
6
-
210.29
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:150x10 mm
6
-
65.29
Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit.
13
-
1470.26
Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick fully Perforated Gypsum Board tile made from plaster board having glass fibre conforming to IS: 2095 Part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with centre borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side , having as NRC ( Noise Reduction Co efficient) of 0.79, with 50 mm resin bonded glass wool backing.
18
-
1488.32
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS : 2095 : part I
45
-
1749.61
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)
9
-
6822.94
Supply and installation of graphics pattern / instructions / images etc over fixed glass panels / doors of approx. 1.2 m height as per the approved pattern including all labour and other incidental charges etc. complete.
27
-
4799.13
Supply and installation of 3M make frosted film pattern throughout all the internal glass panels wherever required of approx. 1.2 m height as per the approved pattern. - STO room, Supdt room, glass doors etc.
28
-
1374.75
Providing and fixing 100 mm size patch lock ( best make of approved quality ) with Euro cylinder for glazed doors including necessary cutting and making good etc. complete
4
-
3637.69
Providing and fixing stainless steel TGD handles 32x600 mm as per drawings and specifications and as per direction of Engineer-in-Charge.
4
-
4820.51
Providing and fixing stainless steel TGD handles 32x300 mm as per drawings and specifications and as per direction of Engineer-in-Charge.
6
-
2497.51
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
822
-
569.21
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
557
-
658.7
Providing and fixing in position frameless fixed glazing using 12mm Thick Clear Toughened Glass (Brand - saint gobian / modi guard) fixed Dorma WCP at Top and bottom or SS patch fittings as approved from finished floor level up to height of 2.1 meter. STO room, Supdt room etc.
41
-
4498.19
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
4
-
1282.91
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness of approved make.
41
-
1097.72
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:100 mm
10
-
66.77
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness of approved make.
4
-
1486.25
Providing and fixing 100 mm brass locks of approved make for aluminium doors including necessary cutting and making good etc. complete
9
-
531.46
Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer - in-Charge complete.255 x 19 mm
41
-
399.19
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium
8
-
101.11
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm
9
-
147.6
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete : 150x10 mm
9
-
95.19
Providing and fixing Powder coated Aluminium (minimum thickness of powder coating 50 micrones) locking arrangement for sliding windows including necessary screws and fittings of approved make as directed by the engineer in charge.
4
-
174.22
Providing and fixing UV stabilised colour film of approved make (3M/Gareware etc) over the glass surface of sliding / openable windows.
20
-
1742.25
Supply and installation of ready made 16 gauge galvalueme sheet approved make single leaf steel doors including frame, in - built locking arrangements, handle, bolts and other hardwares / accessories. The doors shall be powder coated or painted to glossy finish using anti - corrossive coatings to achieve a wooden surface finish. The door frames shall be fixed to the walls with anchor bolts/screws grouted and the gaps between frame and wall filled with cement sand mortar in CM 1:3. The doors shall be installed only after flooring works and the rates shall be inclusive of transportation, labour and other charges.
4
-
17422.5
Supply and installation of ready made 16 gauge galvalueme sheet approved make double leaf steel doors including frame, in - built locking arrangements, handle, bolts and other hardwares / accessories. The doors shall be powder coated or painted to glossy finish using anti - corrossive coatings to achieve a wooden surface finish. The door frames shall be fixed to the walls with anchor bolts/screws grouted and the gaps between frame and wall filled with cement sand mortar in CM 1:3. The doors shall be installed only after flooring works and the rates shall be inclusive of transportation, labour and other charges.
3
-
29037.5
Providing and fixing powder coated Aluminium louvered Ventilators (minimum thickness of powder coating 50 microns) of approved colour HINDALCO or equivalent 9771, with 5mm thick frosted glass of approved make for aluminium U channel louvers including necessary grooves in frames for fixing glass etc. complete
1
-
4646
Sub Head 8-Steel Work
-
-
-
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
513
-
166.47
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
600
-
127.24
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts,locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer .
8
-
7935.91
Supplying, providing and fixing bird net with welded mesh (8 gauge ) size of hole 25mmx25mm or nearest available size fixed to structural frames (already fixed) as per drawings and specification.
46
-
327.78
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
928
-
699.34
Sub Head 9-Flooring and Waterproofing Works
-
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. (Note: Basic price of tile-Rs.650/sqm including tax. Any savings/reduction in basic price shall be accounted in the bill on pro rata basis)
254
-
1373.52
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm (Note - Basic Price of tile - Rs 650/sqm including tax. Any savings/reduction in basic price shall be accounted in the bill on pro rata basis )
22
-
1396.89
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
88
-
1102.6
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
27
-
1107.19
Supplying and filling Cement Sand mix 1:10 including cost and conveyance of all materials, labour charges for compacting, levelling, curing etc., complete. - All toilets
2
-
4394.54
Supplying and laying in position matt finish anti - skid vitrified step tiles with minimum thickness of 10.4mm or as specified by the manufacturer having water absorption less than 0.08% and conforming toIS 15622:2006 of approved make in all colours and shades laid on minimum 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), including grouting the joints using 3mm spacer filled with epoxy joint fillerof matching colour and shade etc. complete - Staircase flooring
(Note - Basic Price of tile - Rs 600/sqm including tax. Any savings/reduction in basic price shall be accounted in the bill on pro rata basis )
17
-
1313.99
Supplying and laying exterior grade anti - skid ceramic tiles 600mm x 600mm x 6 mm thick of approvedsize, colour and make in flooring including an underlayer of cement mortar 1:4 ( 1 cement : 4 coarse sand) minimum 20mm thick and cement slurry @ 3.3kg of cement per sqm, including grouting the jointsusing 3mm spacer filled with epoxy joint filler of matching colour and shade etc. complete - Ramp flooring
(Note - Basic Price of tile - Rs 600/sqm including tax. Any savings/reduction in basic price shall be accounted in the bill on pro rata basis
10
-
1363.26
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
16
-
441.6
Sub Head 10-Finishing
-
-
-
20 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
4
-
373.65
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1:3 ( 1 Cement : 3 fine sand)
10
-
379.8
12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
902
-
237.38
15 mm cement plaster on the rough side of single or half brick wall of mix:1:6 ( 1 cement : 6 fine sand)
639
-
274.17
15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)
68
-
296.45
Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand).
1043
-
212.88
Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.
100
-
50.56
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
945
-
129.39
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
2103
-
54.7
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats
1493
-
105.11
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
458
-
143.3
Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
153
-
223.02
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
8
-
116.06
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
90
-
166.25
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
80
-
181.35
Lettering with black Japan pint of approved brand and manufacture
300
-
4.07
Sub Head 11-Roofing Works
-
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
6549
-
100.15
Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) 6 mm thick cement board
364
-
1613.29
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)
364
-
352.34
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).
50
-
77.65
Providing and fixing Hysquare UPVC Rain water gutter with 100 mm depth ,160mm width of approved quality and make wih necessary UPVC Clamp at 1m intervels, UPVC Corners,UPVC Corner Drop,End Cap,Center Joint,SS screws etc complete as per the direction of Engineer in charge.
71
-
706.99
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
10
-
349.89
Sub Head 12-External Services including Land Development Works
-
-
-
Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).500 mm dia piles
120
-
2602.32
Chipping carefully cut off portion of piles as required without any damage to the piles and dressing the top and removing debris away from the site without any extra cost as directed including the cost of all tools, plants, coveyance, labour, lead, lift etc. complete as directed by the Engineer in Charge
2
-
4018.79
Extra (DSR Item no 20.2) for boring in hard strata (Where N100) weathered / disintegrated /soft rock /rock and socketing as per drawing .500mm dia Pile.
12
-
2323
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
140
-
246.34
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
27
-
76.61
Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock
16
-
408.37
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock
3
-
137.38
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc.
117
-
186.16
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
659
-
460.78
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
11
-
6629.45
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
44
-
9543.4
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
43
-
10732.97
Add for using extra cement in the items of design mix over and above the specified cement content therein
44
-
995.94
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
28
-
287.12
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
459
-
560.48
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
10
-
625.17
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
92
-
507.63
Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
28
-
692.61
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more
6560
-
83.79
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
6763
-
83.79
Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
-
9693.22
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 Grade C for foundation and plinth with wall thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
3
-
5356.06
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 Grade C for super structure up to floor two level with wall thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
24
-
5871.53
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 ( 1 cement : 6 coarse sand)
417
-
288.09
9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
119
-
239.23
12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand) :Flush Band
9
-
5.11
Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster
121
-
347.45
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
24
-
1.48
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
525
-
143.3
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
175
-
166.47
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
972
-
127.24
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
45
-
166.25
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
180
-
911.48
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
3
-
7420.73
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
4
-
1247.53
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
45
-
15.99
Sub Head 13- Horticulture Works
-
-
-
Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler
50
-
301.85
Supply and stacking of plant nandyarvattam / Tabernaemontana divaricata (Chandni double) of height 45-60 cm in earthen pots of size 20 cm as per direction of the officer-in-charge - landscaping works
10
-
68.78
Supply and stacking of Pine / Pinus longifolia (Pinus) plant of height 90-105 cm. in cement pots of size 35 cm as per direction of the officer-in-charge - landscaping works
10
-
945.72
Supply and stacking of plant Arali / Nerium oleander variegated of height 60-75cm., multibranched in earthen pots of size 25 cm as per direction of the officer-in-charge - landscaping works
5
-
103.17
Supply and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara, Mohan, Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge - landscaping works
10
-
60.18
Supply and stacking of Kani konna / Cassia fistula (Amaltash) plant of height 120-135cm. in big poly bags of size 25 cm as per direction of the officer-in charge - landscaping works
5
-
103.17
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment)
25
-
219.64
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material's as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants
50
-
4.94
Providing of Areca palm plant, having ht. 1.50 m to 1.80 m with 6 to 8 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot
10
-
214.3
Sub Head 14-Internal Water Supply and Sanitary Installation
-
-
-
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts ,Flexible connection ( Heavy duty)and gasket etc complete.
4
-
14338.71
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests,Flexible connection ( Heavy duty)
2
-
5172.81
Supplying and fixing floor mounted type W.C. pan with `P or `S trap for Handicapped with Coupled cistern, seat cover, wash basin, faucet, grab bars and hand rail . Providing water & Soil connections to the closet, including cutting and making good the walls and floors wherever required. All items CERA or equivalent make conforming to the following. EWCP concealed 740x520x835mm (7011) with cistern (7111), seatcover (7311), Internal fittings (7211), wash basin 450x300 mm (7707), faucet with spatula lever, 2 Grab bars and 1 No. Hinged Rail.Flexible connection ( Heavy duty)
1
-
35740.17
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
2
-
1377.88
Providing and fixing PTMT urinal cock of approved quality and colour.15 mm nominal bore, 80 mm long 42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gms with connection tube.
2
-
213.1
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in Charge and finished smooth.White Agaria Marble Stone
2
-
4192.42
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, bottle trap ,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps
10
-
2690.4
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
18
-
704.23
Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
6
-
757.97
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
4
-
1210.89
Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.
4
-
166.25
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
2
-
729.17
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms
10
-
146.26
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms
2
-
625.77
Shower - Supply & fixing at site in position showering system consisting of Cera -F 2006152 bibcock long body, Cera F-7020102 overhead shower and Cera QTF F 4050503 20 mm stop cock Concealed part & HTff 3001351 or equivalent items.The pipes shall be measured separately suitable for 20mm pipe line.Concealed Stop Cock and shower Set
7
-
4494.77
Providing and Fixing Chromium plated Coat Hook with twin arms, heavy quality fixing to rear of wooden shutter of toilet doors with CP screws etc. complete.Cat No: CA 308 or equivalent.
1
-
420.46
Sub Head 15- Soil, Waste, Vent and Rainwater Pipes
-
-
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2
40
-
339.21
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
30
-
349.76
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
20
-
515.39
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
15
-
615.39
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall
30
-
342.47
Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 40 mm nominal outer dia pipes
40
-
469.2
Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make for Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 32 mm nominal outer dia pipes
30
-
389.11
Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 25 mm nominal outer dia pipes
30
-
302.28
Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft)20 mm nominal outer dia pipes
25
-
260.13
Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type A) (IS:13592) or ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, etc. complete. (For Rain water pipes above porch and vent pipes) 75 mm O.D type A
90
-
411.59
Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, door bends, junctions, cowls, etc., complete. (In Shaft & Ceiling) - In shaft 75 mm O.D.(SWR Type-B- IS-13592)
20
-
535.1
Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, door bends, junctions, cowls, etc., complete. (In Shaft & Ceiling) - In shaft 110 mm O.D. (SWR Type-B- IS- 13592)
20
-
693.69
Providing, Fixing, custom built (prefabricated) PVC floor sumps / floor traps fabricated out of 110mm dia 6kg Class PVC pipes with inlet and outlet from 40mm upto 75mm, including providing water seal, fixing to a perfect level, laying cement concrete in 1:3:6 mix using 20mm size coarse graded aggregate, providing 150x150 mm size C.P / PVC Symet colour grating with frame alround , at 4mm below finished floor level making holes in masonry or concrete cutting surfaces, conveying all dismantled portions and clearing the site, making leak proof joints and tesing etc, complete and as directed.
13
-
750.7
Providing, Fixing, testing and commissioning at site in position Concealed floor trap (4" UPvc fabricated Multi Trap, with Stainless Steel Square frames (150x150mm) SS (304), Rubber Seal and flat round cover with screw. etc. complete in all respects. 50/75 mm dia outlet (For Urinals in Sunken Slab) 4" Multi floor Trap (Astral Make)
2
-
2018.69
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
6
-
60.55
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
40
-
421.69
Provide & Fixing Lever operated half turn Ball valve (Brass) Zoloto or equivalent make, heavy duty 50mm nominal bore
2
-
3155.8
Provide & Fixing Lever operated half turn Ball valve (Brass) Zoloto or equivalent make, heavy duty 40mm nominal bore
4
-
2195.24
Provide & Fixing Lever operated half turn Ball valve (Brass) Zoloto or equivalent make, heavy duty 32mm nominal bore
6
-
1007.02
Provide & Fixing Lever operated half turn Ball valve (Brass) Zoloto or equivalent make, heavy duty -25mm nominal bore
5
-
882.74
Provide & Fixing Lever operated half turn Ball valve (Brass) Zoloto or equivalent make, heavy duty -20mm nominal bore
15
-
542.42
Providing, Fixing, testing and commissioning at site GI Slotted Rail Brackets, hangers, supports including drilling holes to fix the pipe clamps, as per detailed drawing for supporting soil, waste & rain water pipes & water supply pipes in shaft and ceiling with suitable GI clamps, bolts, threaded rods, anchor bolts nuts & washers fixed on shaft walls/outer walls etc. The quoted rate shall include with the cost of brackets galvanized with zinc alloy of 1.6mm thick conforming to IS 1239 etc., complete as directed by the employer.(Hitech Supports/ Equivalent)
20
-
414.66
Sub Head 16-External Sewage
-
-
-
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
4
-
121.5
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
150
-
333.76
Supplying & Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, uPVC pipe of IS 4985(6kg/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete (excluding earth work) 110 mm O.D. ( sewer line )
70
-
691.63
Supplying & Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, uPVC pipe of IS 4985(6kg/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete (excluding earth work)) 160 mm nominal outer dia pipes (Rain water line)
80
-
1389.6
Supplying and fixing 110mm PVC vent cowl - for septic tank
3
-
197.45
Supplying and fixing C.I. cover with frame for manholes : 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 38 kg - for septic tank and UG tank
2
-
2659.66
Supplying and fixing 110mm PVC Tee for inlet and otulet arrangement - for septic tank
2
-
204.23
Supplying and fixing 50 mm PVC Air vent including fittings - for rainwater harvesting tank 50 mm nominal outer dia pipes
5
-
327.06
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
30616.89
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With Sewer bricks conforming to IS : 4885
16
-
12848.17
Extra for depth for manholes Size 90x80 cmWith Sewer bricks conforming to IS : 4885
4
-
8658.79
Providing and fixing square-mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard-for manhole 150 X 100 mm size Ptype with sewer bricks conforming to I S:4885
5
-
2428.39
Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
5
-
3133.12
Cement concrete 1:5:10 (I cement 5 sand and 10 broken stones) encasing using 20 mm granite broken stones and fine sand for concreting horizontal pipes in the trenches, hire and labour charges for form work ,watering for curing etc complete as per the satisfaction of the Project Manager including cost of all materials.
10
-
6028.46
Sub Head 17 - Bore well,Pump and Accessories
-
-
-
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level.All types of soil 300 mm dia
50
-
548.78
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.200 mm nominal size dia
50
-
904.01
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level to form bore well of size 150 mm including flushing and cleaning the bore as specified by the Engineer in charge.Rocky strata including Boulders
200
-
1265.92
Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS : 2800 ( part I), including necessary bolts & nuts of required size complete.200 mm clamp
1
-
580.17
Providing, fixing, Erecting testing and commissioning of 1 HP single phase Centrifugal Pump set of approved make ( Kirloskar or equivalent ) having 33 lpm against a total head of 15 metres including all accessories such as starter, switch board, 2.5 mm2 PVC sheathed copper core cable from starter to the motor, required length of PVC suction pipe, foot valve,etc. complete - for sump
1
-
29037.5
Providing, fixing, erecting,testing and commissioning Bore well pump of approved make (CRI or equivalent ) and required capacity, Three phase capable of discharging 30 lpm against the specified head including all accessories such as starter, switch board, 4 sq. mm flat cable(nominal length up to 15.00 meters) from the motor inside the well up to starter (all approved brands as specified by the Engineer in charge) - pump for bore well
3.75
-
28085.07
Providing, Fixing at site in position uPVC Pipes (as per ASTM D - 1785 sch-80 ) of approved make for Pumping line from ( Sump to Over head Tank ) complete with all necessary (ASTM D - 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) 32 mm nominal outer dia pipes
40
-
425.93
Providing and fixing rectangular high density polyethylene water storageloft tank with cover, conforming to ISI : 12701, colour of opaque white or asapproved by Engineer-in-charge. The rate includes making necessary holesfor inlet, outlet & over flow pipes. The base support i/c fittings & fixtures fortank shall be paid separately.
1000
-
10.73
Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work 32 mm dia nominal bore
250
-
366.25
Sub Head 18- Strong Room Door
-
-
-
Supply and Installation of BIS Labelled Class 2 DD Door conforming to I.S. 11188/1991 Godrej or equivalent make with Exhaust fan and Ventilation arrangement made of 25 mm slab of Torch and Drill resistant Matrix Slab with a 65 mm Double Duty Barrier making it virtually invincible from attacks of Sledge hammers/hydraulic jacks/powerdrills/torch and oxy acetylene flame,Locks and relocking devices should be protected by specially designed drill defeat shield , Godrej or equivalent make superior quality dual control high precision 8 lever locks to be provided. All steel components should have undergone a 12 stage anti corrosion treatment followed by rust inhibiting paint for greater protection against fire. Six pockets of 5" *5"*5" should be provided, 3 pockets on either side from inner side of strong door. It should have 4 Recesses of 6"*4"*1" on outer side of wall. Overall size of the door should be 2178*1250 with a weight of 1000 kg and should be TRTL 30 and FR 30 type as per IS 11188:1991. Product should be BIS Certified and having authorised dealer Network for Sales and Services all over Kerala.
1
-
579571.08
Sub Head 19- Electrical Works - Wiring
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
94
-
1120.66
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
2
-
1197.64
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
600
-
74.02
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
850
-
111.03
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm
210
-
164.32
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm
30
-
219.1
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
750
-
84.38
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
500
-
102.15
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
150
-
131.76
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm X 75 mm X 60 mm deep
4
-
140.64
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.100 mm X 100 mm X 60 mm deep
2
-
168.77
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.150 mm X 150 mm X 60 mm deep
1
-
248.71
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
16
-
124.35
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
7
-
168.77
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
23
-
119.91
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
7
-
226.5
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
12
-
142.12
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet
2
-
143.6
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push
1
-
168.77
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
18
-
426.36
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
-
35.53
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
30
-
259.07
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
12
-
273.87
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)
3
-
303.48
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
17
-
381.94
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module
2
-
122.87
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module
1
-
134.72
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.4 Module
1
-
149.52
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module
5
-
186.53
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).
24
-
463.37
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
11
-
601.04
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required.
100
-
68.1
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
1
-
90.3
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.as required.
18
-
155.44
Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
24
-
41.45
Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep
6
-
331.61
Supplying and fixing PVC batten/ angle holder including connection etc. as required.
7
-
91.78
Sub Head 20- Distribution Boards
-
-
-
MAIN PANEL BOARD MSB : SITC of Free standing, floor mounting Switchboard fabricated out of 16SWG CRCA sheet with Top/Bottom Cable entry facility for both incomer and outgoing side. INCOMER : Moulded Case Circuit Breaker 4P, 63A, 25kA with ,OC,SC,EF,Shunt releases with thermal magnetic release -1no, ELR with Core Balanced CT Protection, INSTRUMENTS FOR INCOMER : 3Phase Multi Function Meter , 3nos Cast Resin Metering CTs, CL1,5-15VA, 50/5A, 3nos 2A Control fuses - 1set,LED Type Red Yellow Blue (RYB), Red Amber Green (Close/Trip/Open) Indication Lamps with Control fuses and toggle switches - 1set, BUSBAR : 100 Amp TPN Aluminium Bus (36KA Ics value)- 1No, Earth bus - 25 x 3mm Copper strip.OUTGOINGS : 40Amp 4P MCB , 16 KA -4No, 40Amp DP MCB, 16 KA - 1No
1
-
84215
Fabrication, Supply, Installation, testing & Commissioning of Lockable type energy Meter cubicle made out of 16 SWG CRCA sheet with view glass and consisting of following (Complete with all interconnections and powder coated painting - to be fixed outside the building) a. Separate chamber for 3-Ph energy meter, Cutouts etc. b. 1 No. 63A FP Isolator
1
-
11616
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43)
2
-
5076.58
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door
1
-
2019.27
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
34
-
256.11
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole
1
-
685.43
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
12
-
10.36
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2
-
987.43
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
6
-
2442.66
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
1
-
928.21
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
-
220.58
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. For 14 way, Double door SPN MCBDB
1
-
722.44
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 6 way, Double door TPN MCBDB
2
-
903.04
Sub Head 21- Cable Trunking
-
-
-
Providing and fixing the following 16SWG Hot Dip Galvanised Floor Trunking with 16SWG Trunking Cover along with necessary supports at equal intervals with neccessary Junction Boxes as required in Office area as directed by engineer in charge. Including providing of supports, nuts, bolts, washers and fasteners as required. The installation shall be complete in all respects (All accessories like tees, bends vertical / horizontal shall be factory fabricated and cost of these to be included in the rate.75 mm width X 38 mm depth X 1.6 mm thickness
75
-
2784
Sub Head 22- Light Fixtures
-
-
-
Supply installation testing and commissioning of following light fixtures complete with all necessary accessories including suspenders, connectors etc as required (Sample shall be aprroved by the engineer in charge). The installation shall be complete in all respects. (Qty of Light Fixtures may change according to Final Design) -36w 2x2 Recess mounting fixture with CRCA body, LED Back Lit Principle for Long Lasting Life, Thin Bordered, 3500 lumens light output, 2.5KV Surge Protection, Power Factor 0.95, THD 10% and 140-270 voltage range. Crompton Cat.ref LCTLRN-36-FO-CDL or equivalent in Philips/wipro only.
1
-
3861
Supply installation testing and commissioning of following light fixtures complete with all necessary accessories including suspenders, connectors etc as required (Sample shall be aprroved by the engineer in charge). The installation shall be complete in all respects. (Qty of Light Fixtures may change according to Final Design) -20w 4 Feet LED Batten Tubelight with CRCA body, acrylic diffuser, 2000 lumens light output 2kVsurge protection, power factor 0.90 and operating range 140-270v 50Hz. Crompton Cat.ref LCTLP-20-CDL or equivalent in Philips/wipro only.
31
-
689
Supply installation testing and commissioning of following light fixtures complete with all necessary accessories including suspenders, connectors etc as required (Sample shall be aprroved by the engineer in charge). The installation shall be complete in all respects. (Qty of Light Fixtures may change according to Final Design) -10w 2 Feet LED Batten Tubelight with CRCA body, acrylic diffuser, 1000 lumens light output 2kVsurge protection, power factor 0.90 and operating range 140-270v 50Hz. Crompton Cat.ref LCTLP-10-CDL or equivalent in Philips/wipro only.
5
-
414
Supply installation testing and commissioning of following light fixtures complete with all necessary accessories including suspenders, connectors etc as required (Sample shall be aprroved by the engineer in charge). The installation shall be complete in all respects. (Qty of Light Fixtures may change according to Final Design) -3w LED Bulb with B22 base, acrylic diffuser, Self declaring R no, power factor .90, Make :- Crompton cat part no. LED3DFCFL-PRO-BO or equivalent in Philips/ wipro only.
8
-
103
Supply installation testing and commissioning of following light fixtures complete with all necessary accessories including suspenders, connectors etc as required (Sample shall be aprroved by the engineer in charge). The installation shall be complete in all respects. (Qty of Light Fixtures may change according to Final Design) -7w 1 Feet LED Mirror light with THD20% and operating range 140-270v 50Hz. Crompton cat part no. LCL-07-CDL or equivalent in Philips/ wipro only.
10
-
1241
Supply installation testing and commissioning of following light fixtures complete with all necessary accessories including suspenders, connectors etc as required (Sample shall be aprroved by the engineer in charge). The installation shall be complete in all respects. (Qty of Light Fixtures may change according to Final Design) -30w LED Flood Light with 3000 lumens light output, IP66 protection, 5KV Surge Protection, High power LED's of Cromptoncat part no LFLN11-30-CDL or equivalent in Philips/ wipro only.
4
-
4688
Supply installation testing and commissioning of following light fixtures complete with all necessary accessories including suspenders, connectors etc as required (Sample shall be aprroved by the engineer in charge). The installation shall be complete in all respects. (Qty of Light Fixtures may change according to Final Design) - 20w LED Gate/Post top light fitting with IP65 Protection, 5kv surge protection and diecast aluminium housing of Crompton LPTH-20-CDL or equivalent in Philips/ wipro only.
2
-
6895
Supply of 400mm Sweep Wall Fan with necessary Bracket and Clamps
2
-
3271
Supply of 1200mm(48 inches) Sweep Ceiling Fan of 320RPM, operating voltage of 220-240V, Double ball bearing type with necessary fixing bracket and Clamps as required.
18
-
3045
Supply of 300 mm sweep Exhaust fan with Metal blades of approved colour, quality and complete the work in good condition as directed by the engineer in charge.
6
-
2307
Sub Head 23- Cabling
-
-
-
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1).4C x 16 SQ MM
80
-
157
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1).4C x 10 SQ MM
70
-
141
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1).3C x 4 SQ MM
40
-
83
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Copper conductor cable conforming to IS 7098 (Part 1).6C x 1.5 SQ MM
70
-
154
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
20
-
304.96
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
170
-
37.01
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
2
-
300.52
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
6
-
377.5
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 4 sq. Mm
2
-
205
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.6c X 1.5 sq. Mm
2
-
193
Sub Head 24- Earthing
-
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
-
6405.69
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
80
-
108.07
Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.
160
-
269.43
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
10
-
190.97
Sub Head 25- UPS and Diesel Generator
-
-
-
ONLINE 5 KVA UPS Supply, installation testing and commisioning of online 5KVA UPS with double conversion technology(1ph input & 1 ph output), with suitable SMF batteries for 1 hours back up. The UPS should possess IP20 protection and having IGBT based rectifier & inverter, 0.9 power factor, Seperate bypass, rack/tower covertible, transient respones less or equal to+/-8% for 100% nonliner step load (Online mode), crest factor upto 3.1 at full load, Harmonic distortion5%, Voltage Distortion=3%(for linear load)and =6%(for non linear load),and with LED/LCD indicators showing load status, Battery status, over/under voltages, discharge timer& fault conditions. Rate including supply and fixing battery rack, connecting links etc and with 1year onsite warranty from the date of installation, complete with all accessories as required.
1
-
128283.01
Diesel Generator set with AMF Panel: Supply, Installation,testing and comissioning of 15KVA three phase 415V 0.8pf 50Hz.Diesel engine driven generator set with standard control panel,accoustic enclosure etc. of the following specification. Diesel Generating set comprising of diesel engine,alternator fuel tank, control panel, remoted switch etc.complete.Diesel engine shall be suitable for continious operation of generator set inclusive of fly wheel, flexible coupling air cleaner, corrosion resistor,fan with guard,fuel pump, fuel filter, electrical starting system with starter,24V battery and battery charger,voltage regulator, instrument panel,KWH meter,rpm indicator,Residual echaust silencers, protections against low lubrication oil pressure.Alternator 0.8 pf self excited, self regulated brushless type, ceip proof conforming to IS.4722 with latest amendements. The engine shall be mounted over a sturdy common base frame.Floor mounted dust and vermine proof, indoor type standard control panel shall be consisting of 63A 4P MCCB on generator side,voltmeter 0-500V, 3 ammeters,frequency meter 45-60Hz,range,CT ratio 50/5A and indicating lamp with fuse and switch control etc.complete with necessary interconnections, fuses,labels and other accessories including first filling of oil and diesel for commissioning of the DG set.The engine shall be water-cooled(Energy meter & CTs shall be tested and certificate shall be obtained from electrical inspectorate Lab and sanction may be obtained from the electrical inspectorate). Accoustic enclosure with compartment for control panel for the 15KVA DG set. The sound level shall be brought down to 60D.B , +/-5 with in a distance of 3mtr. The base frame shall be made of 100*50mm M channel,body shall be with 60SWG corregated painted GI Sheet, roof 18 SWG corregated, painted GI sheet. inner shall be with 22SWG Al.perforated sheet with 2.5mm perforation. Body thickness shall be minimum 150mm. ACoustic insulation material shall bemineral wool/resign bounded fibreglass of grade 32 and 48Kg/m^3 having and NRC value of 0.96 and 1.21 (with minimum thickness of 50mm). The 48Kg/m^3 shall be wih black glass tissue faced. 40KgM3 RP tissue shall be used in between metal and insulation. Doors shall be sliding on either sides. Ex. fan of sufficient capacity, tube light etc. shall be provided inside the enclosure. Sufficient fresh air intake and hot air outlet with splitters to be arranged so that the temperature inside should not be increased 5 degree above the ambient temperature. Exhaust pipe inside the enclosure up to and including silencer shall be enclosed with Al. cladding over thermal insulation.
1
-
436828
Supply and fixing of additional length of exhaust pipe of required dimensions up to required height as directed by Engineer in Charge and Electrical inspectorate work includes clamping the pipe along the wall if necessary, Synchromate coating, 2 coats of painting etc. as reqd.
15
-
1450
Sub Head 26- CCTV
-
-
-
Supply, Installation, Testing and commissioning of CCTV with the following accessories (Rate is inclusive of all the below mentioned Item including CAT 6 cable in PVC Conduit (Note: CCTV Location mentioned in the drawings) Indoor HD bullet camera with IR with 1/3-inch CMOS, 2.0MP, 720p, Sensor pixels 1280 x 960 with IR LED @ 20mts ,Sensitivity-0.24 lx (color),0.05 lx (mono), H.264 (MP); M-JPEG video compression, Motion, tamper and audio detection, Dyamic range, Electronic shutter, White balance, BLC, Privacy Masking, Fixed 3.6 mm lens, ONVIF etc
10
-
4670
Supply, Installation, Testing and commissioning of CCTV with the following accessories (Rate is inclusive of all the below mentioned Item including CAT 6 cable in PVC Conduit (Note: CCTV Location mentioned in the drawings). Outdoor Bullet camera with IR , 1/4-inch CMOS, 720P, Total sensor pixels 1952 x 1092 (2MP), Built-in IR illuminator with 30 mts viewing distance, Fully configurable quad streaming, Regions of interest and E-PTZ, Sensitivity-0.24 lx,0.0 lx (IR), Dynamic range, Electronic shutter, BLC, Intelligent defog, Privacy Masking- Four independent areas, fully programmable, Audio Streaming, Varifocal 3 to 10 mm lens, ONVIF Profile , IP66 etc
1
-
6534
Supply, Installation, Testing and commissioning of CCTV with the following accessories (Rate is inclusive of all the below mentioned Item including CAT 6 cable in PVC Conduit (Note: CCTV Location mentioned in the drawings). Network Video Recorder:16 CH HD NVR Connectable to HDTVI, AHD and analog cameras supports real-time 1080p lite of all channels, HDMI/VGA output at up to 1920 & 1080 resolution, One SATA interface (up to 6 TB capacity per HDD), 4/8/16-ch synchronous playback at up to 720p resolution, One self-adaptive 10/100Mbps network interface, USB interface 2 & USB 2.0, 12 VDC Power Supply, RJ45 10M/100M self-adaptive Ethernet interface,TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP TM, HTTPS -Network Protocols, LAN Connectivity facility for Remote Operation
1
-
11800
SITC of Internal SATA Hard Drive 4 TB.
1
-
9450
SITC of 32 inch LED TV Monitor Desk/Wall with HDMI Port
2
-
16650
Supply and laying charges for HDMI Cable
40
-
247
Sub Head 27- Networking
-
-
-
Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required 1 run of Cable
1100
-
50.33
Supplying and Installation of Standard 9U rack with welded frame integrated with side panel / removable side panel and vented top cover with fan mounting provision, associated Front Glass Door with Lock & Key and provision to mount racks on wall. Conforms to DIN 41494 or Equivalent EIA /ISO / EN / CEA Standard, inclusive of cooling fans, Power disrtibution units,16 port loaded Patch Panels, cable organiser, termination of CAT6 cable,wireless mouse etc.............(Exclusive of Network Switches, Rack mounted Servers)
1
-
26136
Supply and fixing of CAT 6 RJ 45 Socket with Shutter and termination of CAT 6 UTP Cable as required.
18
-
508
Supply, installation and testing of 16 port L2 Switch, 10/100 Gigabit Base-T Fully managed switch, with 24Nos. RJ-45 of 10/100 Ethernet ports plus four 10/100/100 copper ports and 2Nos SFP slots(shared with 2 Copper ports) for fiber Gigabit Ethernet expansion,12.8-Gbps, non-blocking, store-and-forward switching capacity, Fully rack-mountable using the included rack-mounting hardware.
1
-
14200
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
450
-
28.13
Providing & Fixing 20Pair Krone module with base frame in the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder coated, Painted in Siemens Grey colour.including dressing, ferruling and punching of telephone cable with krone tool etc. as required.
1
-
11616
Supply, installation, testing and commisioning of 0.51 dia Tinned Copper 20 pair unarmoured telephone cable.
30
-
163
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required.
110
-
42.93
Supply Installation Testing commisioning of Digital EPABX equipped with and expandable with Auto attendent 04 Trunks and 16 Extensions
1
-
37607
Sub Head 28- Air Conditioning
-
-
-
Providing and fixing hi wall split inverter type Air Condition of 1.0 ton capacity ( above 3star rating ) with cordless remote,inclusive of Pressure Testing, MS Works for fixing outdoor units, Gas Charging(R-410A), Vaccumising, Commissioning of 1.0 ton hi wall split Air Condition ( Indoor and outdoor units ). ( Installation should be done as per company specification )
5
-
42476
Sub Head 29- Miscellaneous
-
-
-
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required.
2
-
398.23
Supply& laying of 1.1KV grade 6mm thick rubber mat of 1m wide X 2m long
1
-
1750
Supply and providing 2.0kg Dry chemical powder type fire extinguisher with hose and clamps including fixing it to wall as required.
7
-
2750
Providing and erecting danger notice board for medium voltage installation to be erected as per I.S. The board should be 150 x 150 mm.
1
-
1500
Providing printed instruction chart both in English & REGIONAL LANGUAGE & duly framed out on glass (A3 Size)for treatment of person suffering from Electric shock.
1
-
950
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. - 63 mm dia (OD-63 mm & ID-51 mm nominal)
40
-
200
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. - 120 mm dia (OD-120 mm & ID-103 mm nominal)
20
-
339
Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.
10
-
470.77
Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.
10
-
874.92
Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres.
10
-
183.57
Providing protection of the cable including leveling bottom of excavated trench, providing brick protection with country burnt bricks of size 20x9x8cm, length wise and breadth wise to cover up the UG cable, sand cushioning with M-sand for a thickness of 10cms below the cable and 15cm above the cable, after laying the cable, providing identification tags at 5M intervals, cable markers at 100 M intervals inclusive of cost of all materials excluding excavation and back filling to the satisfaction of Engineer in charge.
30
-
255
Sub Head 29- Burglar Alarm
-
-
-
SITC of Burglar System equipped with the ultramodern microprocessor technology with remote access facility, cellular communicator allows the system to transmit a signal to stored contacts in case of any intrusion or fire, inbuilt siren goes off on sensing a threat, Supports 10 remote controls, 50 wireless sensors and 50 RFID tags, Stores 5 phone numbers, 1 speed-dial number and 1 RFID SMS notification number, SMS alert for low battery of two-way accessories, Built-in loudspeaker for siren and two-way talking
1
-
50820
Sub Head 29- Signage
-
-
-
Providing and fixing of Signages as directed by engineer in charge
1
-
15000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements