Information Technology Department Tender
... More
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
₹ 5,800Tender Fee
Refer Documents
Summary
Upgradation Of Existing Waste Management System At Cyberpark Campus
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CP_759975_2Tender No
CP/CIV/PROJECTS/2025/02Tender Authority
Information Technology Department ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation by mechanical means ( Hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
19.361
298
5785.0668000000005
... More
Filling available excavated earth ( excluding rock ) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
17.39
260
4524.7041
... More
Supplying, diluting and injecting chemical emulsion for PRE - CONSTRUCTIONAL anti termite treatment: Treatment of soil using chemical emulsion by drilling 12 mm diameter holes up-to 300 mm depth at 150 mm center to center: With Imidacloprid 30.5% SC at 2.1 ml per liter of water as per IS 16131. The rate includes preparation of surface, treatment, cost and conveyance of all materials including chemical emulsion, labour charges, lead, lift etc complete as per manufacturer's specification and as directed by Engineer-in-charge. The above work shall be carried-out by an agency having sufficient experience. Only skilled and experienced person shall be employed for this purpose.
16
150
2400.48
... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size)
4.233
412
1744.2076499999998
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
4.233
139
591.3077699999999
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size )
3.038
6857
20833.419179999997
... More
Providing and laying FRP lining water proofing treatment in sunken portion of WC's, bathroom, terrace, water tank, retianing wall etc. as per specification. The application shall be done only after cleaning of surface, there after applying powder with resin, compound, then laying of FRP lining (fibre glass lamination) by applying resin with blue pigment etc. as per manufactures specification. Application of first coat resin with chalk powder on the corner, uneven surface and undulation and laying the o Fibre glass lamination with resin and blue pigment, o Surfase mat lamination with resin. The second coat application shall be done with applying resin with Paraffin wax, chalk powder and blue pigment etc. complete. The rate includes preparation of surface, pressure grouting over slab & side wall, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry and testing of applied area complete
3.4
597
2030.4460000000001
... More
Providing and laying in position machine batched and machine mixed design mix M- 20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.Note: Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. All work up to plinth level
2.983
9472
28256.61665
... More
Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.Note:- Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately. All work above plinth level upto floor V level
0.515
11135
5734.525000000001
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500 D or more
238.4
98
23582.528000000002
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
Thermo - Mechanically Treated bars of grade Fe-500D or more
30.78
98
3044.7576000000004
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns etc. for mass concrete
2.24
337
755.8208000000001
... More
Centering and shuttering including strutting, etc. and removal of form for: Lintels, beams, plinth beams, girders bressumers and cantilevers
21.122
653
13811.46458
... More
Providing and laying autoclaved aerated cement blocks masonry with 150mm / 230mm / 300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. ( The payment of RCC band and reinforcement shall be made for seperately ).
7.66
7861
60217.2516
... More
Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above floor 2 level up to floor V level in cement mortar 1:4 ( 1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
0.925
9745
9014.652250000001
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length ( shape & size according to uPVC profile ), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy ( white powder coated ) touch locks with hook, zinc alloy body with single nylon rollers ( weight bearing capacity to be 40 kg ), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ( Single / double glass panes, wire mesh and silicon sealent shall be paid separately )
Note: For uPVC frame and sash extruded profiles minus 5 % tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of ( small series ) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window upto 1.75 sqm )
5.25
7947
41723.64
... More
Providing and fixing factory made uPVC white colour fixed glazed windows / ventilators comprising of uPVC multi-chambered frame and mullion ( where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length ( shape & size according to uPVC profile ), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion ( if required ) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
( Single / double glass panes and silicon sealant shall be paid separately ). Fixed window / ventilator made of ( small series ) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.
( Area upto 0.75 sqm. )
0.72
7673
5525.1792
... More
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below ( tolerance ± 1mm ), with wall thickness 2.0 mm ( ± 0.2 mm ), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm ( ± 0.1 mm ) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in-charge. Extruded section profile size 48 x 40 mm
0.75
262
196.935
... More
Providing and fixing to existing door frames . 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59 x 24 mm and wall thickness 2 mm ( ± 0.2 mm ) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised / plastic brackets of size 75 x 220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20 x 20 mm and 1 mm ( ± 0.1 mm ) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100 x 24 mm and 2 mm ( ± 0.2 mm ) wall thickness, fixed to the shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ( ± 0.1 mm ) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. ( For W.C. and bathroom door shutter )
1.576
2085
3286.73224
... More
Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length ( shape & size according to uPVC profile ), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor ( if required ), EPDM gasket, wool pile, zinc alloy ( white powder coated ) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy ( white powder coated ) cresent lock ( if required ), stainless steel ( SS 304 grade ) body with adjustable double nylon rollers ( weight bearing capacity to be 120 kg ), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ( Single / double glass panes, wire mesh and silicon sealent shall be paid separately ). Two track two panels sliding door made of ( big series ) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. ( Area of door above 2.00 sqm upto 5.00 sqm )
3.151
7112
22412.27525
... More
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
12.766
1220
15578.988099999999
... More
Providing and laying Ceramic glazed floor tiles of size 300 x 300 mm ( thickness to be specified by the manufacturer ), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 Cement : 4 Coarse sand ), including pointing the joints with white cement and matching pigment etc., complete.
3.115
1097
3419.8339
... More
Providing and laying Ceramic Anti Skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
10.3
1127
11611.087
... More
12 mm cement plaster of mix:
1:4 ( 1 cement : 4 fine sand)
15.826
316
5001.965560000001
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
15.826
136
2158.19162
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer
15.826
71
1125.07034
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
15.826
152
2410.93284
... More
Providing and fixing in position, puf panelled roofing sheets of 40mm thick PU Sandwich pannel, Top sheet 0.5mm, Bottom 0.35mm PGG I / PPGL including all necessary fixtures and adhesive. The rate shall be inclusive of any scaffolding or material lifting charges. Fixing operations of roof/floor panels shall be completed in all respect, including the selection of color and type, as per drawings and specifications and under the overall direction of the Engineer-in-charge
38.5
3052
117520.48
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1138.59
120
137245.6386
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
80
143
11515.2
... More
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works
80
60
4802.4
... More
Providing 120cm long & 75 cm wide centre table 1 1/2"x1 1/2" MS pipes for legs fixed to 1 1/2"x1 1/2" frames, providing 8 mm tinted and bewelled glass top fixed to the frames with suction cups, etc. complete to as per design and specification.
1
40652
40652.5
... More
Providing armrest PVC chair of minimum seat width 40-50 cmand seat depth 40-50 cm, Height of back rest shall be 40-50cmfrom the seat approved design and shade including the cost of labour and material charges etc. as per specification. .
2
2497
4994.46
... More
Supply and installation of Steel slotted Rack of Size 1500 height with 5 compartments, propoerly painted with primer and enamel painting and transport to site
1
6039
6039.8
... More
WASTE MANAGEMENT ROOM
-
-
-
... More
Earth work in excavation by mechanical means ( Hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
58.081
298
17354.6028
... More
Filling available excavated earth ( excluding rock ) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
48.346
260
12579.145739999998
... More
Supplying, diluting and injecting chemical emulsion for PRE - CONSTRUCTIONAL anti termite treatment: Treatment of soil using chemical emulsion by drilling 12 mm diameter holes up-to 300 mm depth at 150 mm center to center: With Imidacloprid 30.5% SC at 2.1 ml per liter of water as per IS 16131. The rate includes preparation of surface, treatment, cost and conveyance of all materials including chemical emulsion, labour charges, lead, lift etc complete as per manufacturer's specification and as directed by Engineer-in-charge. The above work shall be carried-out by an agency having sufficient experience. Only skilled and experienced person shall be employed for this purpose.
97
150
14552.91
... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size)
20.978
412
8643.984900000001
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
20.978
139
2930.4168200000004
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size )
15.291
6857
104859.71450999999
... More
Providing and laying FRP lining water proofing treatment in sunken portion of WC's, bathroom, terrace, water tank, retianing wall etc. as per specification. The application shall be done only after cleaning of surface, there after applying powder with resin, compound, then laying of FRP lining (fibre glass lamination) by applying resin with blue pigment etc. as per manufactures specification. Application of first coat resin with chalk powder on the corner, uneven surface and undulation and laying the o Fibre glass lamination with resin and blue pigment, o Surfase mat lamination with resin. The second coat application shall be done with applying resin with Paraffin wax, chalk powder and blue pigment etc. complete. The rate includes preparation of surface, pressure grouting over slab & side wall, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry and testing of applied area complete
3
597
1791.5700000000002
... More
Providing and laying in position machine batched and machine mixed design mix M- 20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.Note: Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. All work up to plinth level
16.671
9472
157916.88105
... More
Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.Note:- Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately. All work above plinth level upto floor V level
0.619
11135
6892.565
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500 D or more
1332.56
98
131816.8352
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
Thermo - Mechanically Treated bars of grade Fe-500D or more
36.9
98
3650.148
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns etc. for mass concrete
34.681
337
11702.06302
... More
Centering and shuttering including strutting, etc. and removal of form for: Lintels, beams, plinth beams, girders bressumers and cantilevers
111.889
653
73163.09821
... More
Providing and laying autoclaved aerated cement blocks masonry with 150mm / 230mm / 300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-Charge. ( The payment of RCC band and reinforcement shall be made for seperately ).
17.645
7861
138711.9327
... More
Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.
34.052
94
3231.19428
... More
Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above floor 2 level up to floor V level in cement mortar 1:4 ( 1 cement :4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
4.742
9745
46213.49294
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete.Stainless steel ( grade 304 ) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
69.756
1101
76801.356
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length ( shape & size according to uPVC profile ), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy ( white powder coated ) touch locks with hook, zinc alloy body with single nylon rollers ( weight bearing capacity to be 40 kg ), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ( Single / double glass panes, wire mesh and silicon sealent shall be paid separately )
Note: For uPVC frame and sash extruded profiles minus 5 % tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of ( small series ) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window upto 1.75 sqm )
3
7947
23842.079999999998
... More
Providing and fixing factory made uPVC white colour fixed glazed windows / ventilators comprising of uPVC multi-chambered frame and mullion ( where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length ( shape & size according to uPVC profile ), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion ( if required ) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
( Single / double glass panes and silicon sealant shall be paid separately ). Fixed window / ventilator made of ( small series ) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.
( Area upto 0.75 sqm. )
0.72
7673
5525.1792
... More
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below ( tolerance ± 1mm ), with wall thickness 2.0 mm ( ± 0.2 mm ), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm ( ± 0.1 mm ) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in-charge. Extruded section profile size 48 x 40 mm
4.95
262
1299.771
... More
Providing and fixing to existing door frames . 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59 x 24 mm and wall thickness 2 mm ( ± 0.2 mm ) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised / plastic brackets of size 75 x 220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20 x 20 mm and 1 mm ( ± 0.1 mm ) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100 x 24 mm and 2 mm ( ± 0.2 mm ) wall thickness, fixed to the shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ( ± 0.1 mm ) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. ( For W.C. and bathroom door shutter )
1.576
2085
3286.73224
... More
Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length ( shape & size according to uPVC profile ), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor ( if required ), EPDM gasket, wool pile, zinc alloy ( white powder coated ) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy ( white powder coated ) cresent lock ( if required ), stainless steel ( SS 304 grade ) body with adjustable double nylon rollers ( weight bearing capacity to be 120 kg ), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ( Single / double glass panes, wire mesh and silicon sealent shall be paid separately ). Two track two panels sliding door made of ( big series ) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. ( Area of door above 2.00 sqm upto 5.00 sqm )
5.356
7112
38095.888999999996
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover
10.5
3487
36615.6
... More
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge,, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
13.187
1220
16092.755449999999
... More
Providing and laying Ceramic glazed floor tiles of size 300 x 300 mm ( thickness to be specified by the manufacturer ), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 Cement : 4 Coarse sand ), including pointing the joints with white cement and matching pigment etc.,
complete.
3.24
1097
3557.0663999999997
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08%
and conforming to IS: 15622, of approved make, in all colours and shades,
laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),
jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the
joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm
136.55
1777
242695.777
... More
12 mm cement plaster of mix:
1:4 ( 1 cement : 4 fine sand)
8.326
316
2631.5155600000003
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
8.326
136
1135.4166200000002
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
8.326
71
591.89534
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
8.326
152
1268.3828400000002
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
3.735
551
2059.81515
... More
Providing and fixing in position, puf panelled roofing sheets of 40mm thick PU Sandwich pannel, Top sheet 0.5mm, Bottom 0.35mm PGG I / PPGL including all necessary fixtures and adhesive. The rate shall be inclusive of any scaffolding or material lifting charges. Fixing operations of roof/floor panels shall be completed in all respect, including the selection of color and type, as per drawings and specifications and under the overall direction of the Engineer-in-charge
157.5
3052
480765.6
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
3727.986
120
449371.43244
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work
320
143
46060.8
... More
Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works
320
60
19209.6
... More
Providing 120cm long & 75 cm wide centre table 1 1/2"x1 1/2" MS pipes for legs fixed to 1 1/2"x1 1/2" frames, providing 8 mm tinted and bewelled glass top fixed to the frames with suction cups, etc. complete to as per design and specification.
1
40652
40652.5
... More
Providing armrest PVC chair of minimum seat width 40-50 cmand seat depth 40-50 cm, Height of back rest shall be 40-50cmfrom the seat approved design and shade including the cost of labour and material charges etc. as per specification. .
2
2497
4994.46
... More
Supply and installation of Steel slotted Rack of Size 1500 height with 5 compartments, propoerly painted with primer and enamel painting and transport to site
1
6039
6039.8
... More
RETAINING WALL AND INTERNAL ROAD
-
-
-
... More
Earth work in excavation by mechanical means ( Hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
758.52
298
226645.776
... More
Filling available excavated earth ( excluding rock ) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
284.445
260
74009.74455
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size )
49.305
6857
338114.46105
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg / cum. Excess or less cement used as per design mix is payable or recoverable separately. All work upto plinth level
429.828
9472
4071567.221399999
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500 D or more
42982.8
98
4251858.576
... More
Centering and shuttering including strutting, etc. and removal of form for: Walls ( any thickness ) including attached pilasters, butteresses, plinth and string courses etc.
1415.905
721
1021858.6385
... More
12 mm cement plaster of mix:
1:4 ( 1 cement : 4 fine sand )
1415.905
316
447510.9343
... More
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
580
1017
590387.7999999999
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
11.25
9921
111614.62499999999
... More
Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
9
3002
27020.61
... More
SOAK PIT
-
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
29940
29940.8
... More
SLUDGE DIGESTION TANK
-
-
-
... More
Earth work in excavation by mechanical means ( Hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
28.579
298
8539.405200000001
... More
Filling available excavated earth ( excluding rock ) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
21.55
260
5607.0945
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size )
1.742
6857
11945.956619999999
... More
Providing and laying in position machine batched and machine mixed design mix M- 20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.Note: Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. All work up to plinth level
15.686
9472
148586.41929999998
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500 D or more
1568.6
98
155165.91199999998
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns etc. for mass concrete
105.888
337
35728.72896
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-Charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer - in- Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer - in- Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer in Charge:With average thickness of 120 mm and minimum thickness at khurra as 65 mm
7.776
1656
12880.5552
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1.061
7413
7865.978139999999
... More
12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
31.312
327
10240.589600000001
... More
Supply and installation of sludge Digestion tank having a capacity of 33,000 litres with a diameter of 3m and height of 5m including gas space with curved roof top and with vent for release of bio gas including cost of materail, labour etc. A dewatering screw press system to be considered with 0.50m3/hr capacity which includes sludge feed pump, inlet flow control device, floculation tank with agitator, dosing pump, control panel and sludge collection tray
1
1074387
1074387.5
... More
MEP RELATED CIVIL WORKS
-
-
-
... More
Earth work in excavation by mechanical means ( Hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
36.162
298
10805.2056
... More
Filling available excavated earth ( excluding rock ) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
32.03
260
8333.8857
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size )
0.697
6857
4779.754169999999
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg / cum. Excess or less cement used as per design mix is payable or recoverable separately. All work upto plinth level
3.433
9472
32519.264149999995
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500 D or more
274.401
98
27143.74692
... More
Centering and shuttering including strutting, etc. and removal of form for: Walls ( any thickness ) including attached pilasters, butteresses, plinth and string courses etc.
24.471
721
17660.7207
... More
12 mm cement plaster of mix:
1:4 ( 1 cement : 4 fine sand )
29.031
316
9175.53786
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge
20
111
2228
... More
Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)
20
384
7680.2
... More
Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, with sprinkler and maintenance for 30 days or more till the grass established properly as per direction of officer in charge.
50
109
5468
... More
ROADWORK
-
-
-
... More
Excavation for roadway in ordinary rock by deploying a dozer, 80 HP including cutting and pushing the cut earth to site of embankment upto a distance of 100 metres ( average lead 50 metres ), trimming bottom and side slopes in accordance with the requirements of lines, grades and cross sections.
90
278
25080.300000000003
... More
Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm. Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 - For grading I Material
60
413
24811.8
... More
Removal of existing asphaltic wearing coat comprising of 50 mm thick asphaltic concert laid over 12 mm thick mastic asphalt including disposal with all lift and lead upto 1000 m.
60
119
7141.8
... More
PLUMBING WORKS
-
-
-
... More
WATER SUPPLY PIPES AND FITTINGS
-
-
-
... More
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints as per direction of Engineer in Charge.20 mm dia 12 Kgf/cm2
150
194
29154.000000000004
... More
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 25 mm dia 12Kfg/cm2
135
234
31634.550000000003
... More
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2
150
239
35952
... More
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2
1400
284
398734
... More
Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
125
348
43527.5
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm
nominal bore
10
588
5888.8
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
8
1029
8236.08
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)65 mm nominal bore
2
1762
3525.2
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end):32 mm nominal bore. Horizontal
5
760
3800.55
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal bore.Horizontal
2
1355
2710.24
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end): 65 mm nominal bore . Horizontal
2
2421
4842.12
... More
Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5
7
11002
77015.75
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof
20
408
8163.200000000001
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:300 mm dia R.C.C. pipe
100
1022
102296
... More
Providing, fixing, testing and commissioning of brass body nickel plated automatic air release valves with necessary GI Specials, thread, holdtight, brass spindle, NBR and elastomeric, stainless steel spring polypropylenic float at the top most points of water supply distribution ring main. 20 mm dia.
4
1931
7726.6
... More
Supply,Installation,Testing and Commissioning of pop up type sprinkler with 50mm and 75mm pop-up height and adjustment from 0° to 360°.
15
10193
152902.95
... More
Supplying plastic hose of 30 mtr long having thickness minimum of 2mm with adapter to connect to the tapping point for drawing water
5
2408
12041.300000000001
... More
Supply, Installation, testing and commission, of booster pumps with Necessary Fittings in all respect. 1 Working+1standby), for pumping water from Underground rain water tank toirrigation,STP treated water tank to irrigation including solenoid valves, level switches, control wires etc. The price shall inclusive of all connected electrical work., (HP as per selection of pump), 1 working+1 standby, three phase, 440V, AC Supply
1
462106
462106.03
... More
Providing & fixing, testing and commissioning of Waste water Transfer Pump(grinder pump), for pumping waste water/ Kitchen waste/ sewage waste from collection pit to Sewage treatment plant,and STP to sludge digestion tank with including control panel, solenoid valves, level switches, control wires etc. (1Working pump+standby)
with suitable HP
1
346392
346392.75
... More
Providing & fixing, testing and commissioning of Waste water Transfer Pump(grinder pump), for pumping waste water/ Kitchen waste/ sewage waste from collection pit to Sewage treatment plant,and STP to sludge digestion tank with including control panel, solenoid valves, level switches, control wires etc. (1Working pump+standby)
with suitable HP
1
392852
392852.75
... More
PLUMBING SERVICES - STP OPERATOR ROOM
-
-
-
... More
PART A- PLUMBING SANITORY FIXTURES AND FITTINGS
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat
and lid
1
6231
6231.49
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550 x 400mm with single 15 mm C.P.brasspillar taps
1
2973
2973.57
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
1
397
397.11
... More
Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore
1
732
732.96
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
3
630
1890.4499999999998
... More
Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
1
1280
1280.79
... More
Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
1
67
67.04
... More
Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
1
1519
1519.87
... More
Providing and Fixing of superior quality Rob hook with brackets and flange with concealed brass screws etc as per IS specification make and approved by the client / consultant, including cutting & making good the walls
1
1239
1239.61
... More
PART B- WATER SUPPLY PIPES AND FITTINGS
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
5
566
2831.45
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
2
665
1331.1
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 25 mm nominal outer dia pipes
80
386
30950.4
... More
Providing and fixing uplasticised PVC connection pipe with brass unions:45 cm length15 mm nominal bore
1
98
98.31
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
1
588
588.88
... More
Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5
1
11002
11002.25
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
10
10440
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 25 mm nominal bore
1
466
466.69
... More
PART C- DRAINAGE PIPES-SOIL ,WASTE ,VENT PIPES AND FITTINGS
-
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
3
441
1323.33
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.
75 mm pipe 6 Kgf/cm2
4
625
2503.28
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc.
110 mm pipe 6kgf/cm2
3
725
2177.46
... More
Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
20
904
18094.2
... More
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
1
124
124.14
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
12917
25834.24
... More
Extra for depth for manholesSize 90x80 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5
2
8887
17774.04
... More
Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:00x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
2732
2732.55
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof
2
408
816.32
... More
Providing and fixing of PVC multifloor traps to toilet floors and making good the concrete floor as per direction of engineer in charge:75x110mm size
1
946
946.7
... More
Providing and fixing of CP gratings of 150x150mm 2in one cover and making good the concrete floor as per direction of engineer in charge
1
1295
1295.15
... More
PLUMBING SERVICES - WASTE MANAGEMENT ROOM
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
1
6231
6231.49
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brasspillar taps
2
2973
5947.14
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
2
397
794.22
... More
Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore
2
732
1465.92
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
4
630
2520.6
... More
Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
1
1280
1280.79
... More
Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
3
67
201.12
... More
Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
1519
3039.74
... More
Providing and Fixing of superior quality Rob hook with brackets and flange with concealed brass screws etc as per IS specification make and approved by the client / consultant, including cutting & making good the walls
1
1239
1239.61
... More
PART B-WATER SUPPLY PIPES AND FITTINGS
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
7
566
3964.0299999999997
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
2
665
1331.1
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 20 mm nominal outer dia pipes
9
300
2704.59
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 25 mm nominal outer dia pipes
80
386
30950.4
... More
Providing and fixing uplasticised PVC connection pipe with brass unions:45 cm length15 mm nominal bore
2
98
196.62
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore
2
545
1090.3
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
1
588
588.88
... More
Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5
1
11002
11002.25
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
10
10440
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 25 mm nominal bore
1
466
466.69
... More
PART C- DRAINAGE PIPES-SOIL ,WASTE ,VENT PIPES AND FITTINGS
-
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
5
441
2205.55
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.
75 mm pipe 6 Kgf/cm2
4
625
2503.28
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc.
110 mm pipe 6kgf/cm2
3
725
2177.46
... More
Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
25
904
22617.75
... More
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
1
124
124.14
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90 x 80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
12917
64585.600000000006
... More
Extra for depth for manholesSize 90 x 80 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5
3
8887
26661.06
... More
Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100 x 100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
2732
8197.650000000001
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof
2
408
816.32
... More
Providing and fixing of PVC multifloor traps to toilet floors and making good the concrete floor as per direction of engineer in charge:75 x 110mm size
3
946
2840.1000000000004
... More
Providing and fixing of CP gratings of 150 x 150mm 2 in one cover and making good the concrete floor as per direction of engineer in charge:
3
1295
3885.4500000000003
... More
WIRING
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group C
26
1184
30791.8
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A
8
553
4431.6
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
510
174
89066.4
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
78
199
15537.599999999999
... More
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module
12
136
1637.28
... More
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module
4
152
611.24
... More
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module
2
199
398.4
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
24
102
2455.92
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
5
132
661.75
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings)
4
480
1921.08
... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required.
17
77
1322.09
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
409
818.64
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
4
38
152.8
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
152
99
15139.199999999999
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
70
107
7545.3
... More
Supplying and fixing four module GI box with four module modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
4
513
2054.16
... More
MCCBs ,DBs, RCBOs, MCBs
-
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door
1
2105
2105.27
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
1
2455
2455.92
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door
1
3670
3670.24
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door
2
4417
8835.86
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
34
238
8118.18
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
7
987
6914.81
... More
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 4 way, Double door TPN MCBDB
1
1081
1081.97
... More
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 6 way, Double door TPN MCBDB
2
1270
2540.52
... More
Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal DB complete with connections, etc. as required and instructed by engineer in charge/consultant. 16A 30mA DP RCBO
2
3821
7643.1
... More
Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal DB complete with connections, etc. as required and instructed by engineer in charge/consultant. 16A 30mA FP RCBO
2
5021
10043.96
... More
Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal DB complete with connections, etc. as required and instructed by engineer in charge/consultant. 40A 30mA FP RCBO
1
5259
5259.04
... More
Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal DB complete with connections, etc. as required and instructed by engineer in charge/consultant. 63A 30mA FP RCBO
1
5995
5995.89
... More
Supply and fixing of TP CRCA sheet steel powder coated enclosure on surface/recess along with following Amps, 415V, TP isolators confirming to IEC 60947-3 complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation. 32A TP Isolator with enclosure
4
2744
10978.36
... More
CABLES AND END TERMINATION
-
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
2
358
717.68
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
2
394
788.62
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
2
261
523.92
... More
Supply, laying / clamping, testing and commisioning of the following XLPE insulated PVC sheathed armoured heavy duty power cable conductor of best conductivity aluminium/Copper 1.1kV grade strictly conforming to IS:1554 (Part-I) 1964 of the following sizes in cable trench/cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages colour washing etc as required and as instructed by engineer in charge. 3.5cx50sq.mm A2XFY Cable (clamped with 1mm thick saddle)
165
622
102780.15
... More
Supply, laying / clamping, testing and commisioning of the following XLPE insulated PVC sheathed armoured heavy duty power cable conductor of best conductivity aluminium/Copper 1.1kV grade strictly conforming to IS:1554 (Part-I) 1964 of the following sizes in cable trench/cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages colour washing etc as required and as instructed by engineer in charge.3.5cx35sq.mm A2XFY Cable (clamped with 1mm thick saddle)
35
460
16105.6
... More
Supply, laying / clamping, testing and commisioning of the following XLPE insulated PVC sheathed armoured heavy duty power cable conductor of best conductivity aluminium/Copper 1.1kV grade strictly conforming to IS:1554 (Part-I) 1964 of the following sizes in cable trench/cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages colour washing etc as required and as instructed by engineer in charge.
4x10sq.mm A2XFY Cable (clamped with 1mm thick saddle)
4x10sq.mm A2XFY Cable (clamped with 1mm thick saddle)
35
289
10132.15
... More
Supply, laying / clamping, testing and commisioning of the following XLPE insulated PVC sheathed armoured heavy duty power cable conductor of best conductivity aluminium/Copper 1.1kV grade strictly conforming to IS:1554 (Part-I) 1964 of the following sizes in cable trench/cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages colour washing etc as required and as instructed by engineer in charge. 4x4sq.mm A2XFY Cable (clamped with 1mm thick saddle)
115
167
19213.05
... More
Supply, laying / clamping, testing and commisioning of the following XLPE insulated PVC sheathed armoured heavy duty power cable conductor of best conductivity aluminium/Copper 1.1kV grade strictly conforming to IS:1554 (Part-I) 1964 of the following sizes in cable trench/cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages colour washing etc as required and as instructed by engineer in charge.2x4sq.mm A2XFY Cable (clamped with 1mm thick saddle).
35
133
4663.049999999999
... More
Supply, laying / clamping, testing and commisioning of the following XLPE insulated PVC sheathed armoured heavy duty power cable conductor of best conductivity aluminium/Copper 1.1kV grade strictly conforming to IS:1554 (Part-I) 1964 of the following sizes in cable trench/cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages colour washing etc as required and as instructed by engineer in charge.2x4sq.mm A2XFY Cable (clamped with 1mm thick saddle).
14
287
4025
... More
Supply and making end termination with brass compression gland, earth clip and aluminum lugs/ Cu lugs for following size of XLPE insulated and PVC sheathed aluminum/copper conductor cable of 1.1kV Grade as reqiured.2x4sq.mm A2XFY Cable
4
230
920
... More
Supply and laying of XLPE insulated screened stranded copper cable, strictly conforming to IS:1554 (part I) 1964 of the following sizes for control directly in ground/trench / in seperate cable trays with suitable clamps(distance between clamps not to exceed 60cm).12cx2.5 sqmm Cu cable
40
288
11522
... More
Supply and laying of XLPE insulated screened stranded copper cable, strictly conforming to IS:1554 (part I) 1964 of the following sizes for control directly in ground/trench / in seperate cable trays with suitable clamps(distance between clamps not to exceed 60cm).2cx2.5 sqmm Cu cable
40
75
3024.4
... More
Supplying siemens type / trapdoor compression gland, Aluminium Lugs, earth clamps for XLPE insulated and PVC sheathed STRANDED conductor cable 1.1kV grade and making end terminations suitable for following sizes as required.
2x2.5 sqmm Cu cable
2x2.5 sqmm Cu cable
2
143
287.5
... More
Supplying siemens type / trapdoor compression gland, Aluminium Lugs, earth clamps for XLPE insulated and PVC sheathed STRANDED conductor cable 1.1kV grade and making end terminations suitable for following sizes as required.
12x2.5 sqmm Cu cable
12x2.5 sqmm Cu cable
2
373
747.5
... More
FAN FIXTURES
-
-
-
... More
Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackles
2
1906
3812.16
... More
Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep
2
433
867.76
... More
Supplying, of exhaust fan of 250mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc. as required, including all accessories as rquired for complete installation incluidng shutter etc complete as required.(Havells, Ventil Air DX White or equivalent) and all accessories as required for complete installation.
2
1551
3103.52
... More
LT PANELS
-
-
-
... More
Fabrication, supply, erection, testing and commissioning of dust and vermin proof, floor / wall mounted, front operated MV panel board as per IS 8623, CPRI Certified, compartmentalised (minimum form 3b) complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Panel should include surge arrester with inbuilt or seperate back up fuse as required for SPD protection. Providing all connections and interconnections as required and providing all accessories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided. All switchgears shall be with with spreader links and rotary handle. Providing all connections and interconnections as required and providing all accessories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Each MCCB will have variable current setting for overcurrent, front extended lockable handle, padlockable in off position, indication light for ON, shrouding on incomer side, termination shall be suitable for aluminium busbars.All MCCBs of 320A unless otherwise specified and above shall be microprocessor based only.Current density of aluminium and copper busbars shall not be more than 0.80A per sq.mm. and 1.2A per sq.mm respectively.
Necessary electrical and mechanical interlocking arrangements shall be provided as per scehmatic drawing to achieve operational functionality
All panels shall be with separate channels isolated from electrical LT cable chambers for running of RS485 & other ELV cables for integration with EMS & IBMS. Switchgears and meters shall be with necessary communication ports for integration with BMS & EMS as per IO list of BMS. All panel meters should be with RS485 ports for EMS integration. Potential free contacts shall also be provided in the panels for integration with IBMS for obtaining ON/OFF and tripping status of switchgears as per IO list of IBMS.
All Multifunction meter shall be as per IEC 62053-21, class 1, having multiline LED display with following parameters -Phase wise instantaneous and Average values – Voltage, Current, Power Factor, Phase wise instantaneous and Average values – Active Power, Reactive Power lead & lag, Apparent Power, Import & Export Cumulative values– Active Energy, Reactive Energy lead & lag, Apparent Energy, 4. PF for 3 phases and average,Instantaneous Frequency,Total Harmonics Distortion – Phase wise Voltage and Phase wise Current, Min and max of VLL, VLN, A, F, W, VA, VAr, PF with date and time stamp,Battery backed RTC with 2 years of power down time, Demand calculations based on W, VA, VAr, 10. Demand sync – Sliding window or block window site selectable, Demand interval: 5 to 30 min, Individual harmonics upto 15th order for voltage and current, Percentage Unbalance – Voltage and Current, Cumulative Run Hours, Sampling rate of 64 samples / cycle, Measuring circuit burden should be lesser than 0.2 VA, Aux burden < 5VA, Meter shall be suitable for CT secondary 1A /5A including CTs, site programmable CT & PT ratio,Meters shall have RS485 port with MODBUS RTU protocol, with IP 51 protection from front end preventing dust and moisture entry, meters shall be capable of integration with EMS Software
All opening parts of the panel shall be sealable. Panels shall be complete with Al bus bars, separate earth bus bar to be provided through out the length of the panel along with base chanel of suitable size, cable alleys as per requirement, complete, numbering, danger plate etc as required as per specifications and drawings. Current density for busbarsize shall be designed considering not more than 0.8 A/sq.mm for aluminium. The switchgear live parts shall be isolated with proper insulation material. All switchgears shall be with spreader links, operating knobs/handles, DIN rail provision for isolators with required cable alleys. The panel design shall be in accordance with IS & Kerala state norms. All panels shall be cable alleys and seperate bus bar compartments for easy terminations as per KSEI standards with proper clearances.
Incomer - 100A FP isolator - 1 no
100A, 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.
RYB phaseindicating LED lamps with control fuses and switches - 1 set.
Multifunction meter as per IEC 62053 21, specified above including CTs and all accessories - 1 set
3 Phase + neutral, Type - I + II Surge protection device tested for 8/20 micro seconds and conforming to latest IEC ammendmends with inbuilt backup fuse or seperate 40A gG type HRC fuses including connections - 1 set
Outgoings
40A TPN ISO - 2 nos
63A TPN ISO - 2 nos
Multifunction meter as per IEC 62053-21, specified above including CTs and all accessories - 4 set
Each MCCB will have variable current setting for overcurrent, front extended lockable handle, padlockable in off position, indication light for ON, shrouding on incomer side, termination shall be suitable for aluminium busbars.All MCCBs of 320A unless otherwise specified and above shall be microprocessor based only.Current density of aluminium and copper busbars shall not be more than 0.80A per sq.mm. and 1.2A per sq.mm respectively.
Necessary electrical and mechanical interlocking arrangements shall be provided as per scehmatic drawing to achieve operational functionality
All panels shall be with separate channels isolated from electrical LT cable chambers for running of RS485 & other ELV cables for integration with EMS & IBMS. Switchgears and meters shall be with necessary communication ports for integration with BMS & EMS as per IO list of BMS. All panel meters should be with RS485 ports for EMS integration. Potential free contacts shall also be provided in the panels for integration with IBMS for obtaining ON/OFF and tripping status of switchgears as per IO list of IBMS.
All Multifunction meter shall be as per IEC 62053-21, class 1, having multiline LED display with following parameters -Phase wise instantaneous and Average values – Voltage, Current, Power Factor, Phase wise instantaneous and Average values – Active Power, Reactive Power lead & lag, Apparent Power, Import & Export Cumulative values– Active Energy, Reactive Energy lead & lag, Apparent Energy, 4. PF for 3 phases and average,Instantaneous Frequency,Total Harmonics Distortion – Phase wise Voltage and Phase wise Current, Min and max of VLL, VLN, A, F, W, VA, VAr, PF with date and time stamp,Battery backed RTC with 2 years of power down time, Demand calculations based on W, VA, VAr, 10. Demand sync – Sliding window or block window site selectable, Demand interval: 5 to 30 min, Individual harmonics upto 15th order for voltage and current, Percentage Unbalance – Voltage and Current, Cumulative Run Hours, Sampling rate of 64 samples / cycle, Measuring circuit burden should be lesser than 0.2 VA, Aux burden < 5VA, Meter shall be suitable for CT secondary 1A /5A including CTs, site programmable CT & PT ratio,Meters shall have RS485 port with MODBUS RTU protocol, with IP 51 protection from front end preventing dust and moisture entry, meters shall be capable of integration with EMS Software
All opening parts of the panel shall be sealable. Panels shall be complete with Al bus bars, separate earth bus bar to be provided through out the length of the panel along with base chanel of suitable size, cable alleys as per requirement, complete, numbering, danger plate etc as required as per specifications and drawings. Current density for busbarsize shall be designed considering not more than 0.8 A/sq.mm for aluminium. The switchgear live parts shall be isolated with proper insulation material. All switchgears shall be with spreader links, operating knobs/handles, DIN rail provision for isolators with required cable alleys. The panel design shall be in accordance with IS & Kerala state norms. All panels shall be cable alleys and seperate bus bar compartments for easy terminations as per KSEI standards with proper clearances.
Incomer - 100A FP isolator - 1 no
100A, 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.
RYB phaseindicating LED lamps with control fuses and switches - 1 set.
Multifunction meter as per IEC 62053 21, specified above including CTs and all accessories - 1 set
3 Phase + neutral, Type - I + II Surge protection device tested for 8/20 micro seconds and conforming to latest IEC ammendmends with inbuilt backup fuse or seperate 40A gG type HRC fuses including connections - 1 set
Outgoings
40A TPN ISO - 2 nos
63A TPN ISO - 2 nos
Multifunction meter as per IEC 62053-21, specified above including CTs and all accessories - 4 set
1
96108
96108.51
... More
PVC FLEXIBLE CONDUIT
-
-
-
... More
Supply and clamping the following size of corrugated pvc fiexible conduit with necessary locking ring and check nut at termination pointed using suitable size GI/painted MS saddles spacing not exceeding 60 cms on surface including making good the damages, colour washing etc.as required 20mm dia
1
715
715.88
... More
Supply and clamping the following size of corrugated pvc fiexible conduit with necessary locking ring and check nut at termination pointed using suitable size GI/painted MS saddles spacing not exceeding 60 cms on surface including making good the damages, colour washing etc.as required 25mm dia
1
828
828
... More
LIGHT FIXTURES
-
-
-
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
3
139
417.51
... More
Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
30
200
6017.099999999999
... More
Supplying, installation, testing and commisioning of LED surface mounted Downlighter with a nominal system lumen output of 1200 lumens and a minimum system efficacy of 100 lm/W. Luminaire wattage should not exceed 12W. The luminaire should have a color temperature of 6500K and CRI>80. Driver of the luminaire shall have THD 0.9. The heat sink should be made of die cast aluminium and the luminaire optics shall have a high efficiency PC diffuser. Luminaire cutout diameter should not be more than 135mm. The driver shall comply to IEC 62384 , IEC 61347-2-13, IEC 61547, EMI- CISPR15 standards. (Havel ls Make INTEGRA NXT DL ROUND- SURFACE "INTEGRANXTRDDLRSURD12WLED830S" or equivalent)
8
1404
11234
... More
Supplying, installation, testing and commisioning of Linear LED Batten with a nominal system lumen output of 2000 lumens and a minimum system efficacy of 105 lm/W. System wattage should not exceed 20W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. Driver of the luminaire shall have THD < 10% and PF > 0.95. The luminaire housing should be made of CRCA with a PC glossy diffuser. The driver shall comply to IEC 60598, IEC 62384 , IEC 61347-2-13, IEC 61547, EMI- CISPR15 standards. (Havells MakeLumiline Nxt Batten "LUMILINEPLUSNEOBS20WLED840SPCSSIND (2ft. WH)" or equivalent)
13
977
12706.199999999999
... More
Supply, installation, testing and commissioning of 10 W LED type surface/wall mounted luminare as bulk head with optal diffuser and all accessories, of Havells make RUGBY GENX 10 ( RUGBYGENXFTS10WLED865SSYMBOPC)
7
1724
12073.81
... More
Supplying, installation, testing and commisioning of surface mountable, LED bollard Luminaire with Minimum 1000 Lumens output with System efficacy => 90 Lumen/Watts. Total wattage of fixture to be limited to 10W, Symmetrical light distribution. Luminaire made of extruded aluminium alloy (grade 6063) with die-cast aluminium components of high corrosion resistance and non corrosive stainless steel fasteners. Translucent polycarbonate diffuser. Pressure die cast aluminium mounting plate 129mm x 124mm x 4mm thick with 3 elongated holes 15 x 10 to suit M8 bolts at PCD 70 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Protection class IP65. Mechanical resistance IK08. Pure polyester powder coated graphite grey / anthracite grey / jet black. colour temperature 5700K . Colour rendering index (CRI)>80. LED module with expected service life of at least 50,000 operating hours.The luminaire must have minimum 2KV surge protection integrated in driver, PF0.95,and total harmonic distortion THD20%. BIS approved , including all accesories as required .
11
9957
109536.57
... More
Supply, installation, testing and commisioning of 50 W LED Flood Light for wall - with product specification : -- LED Make : OSRAM/CREE- LED/Philips or equivalent Efficiency : 201 lm/W- Colour : Cool White (5500K to 6500K)- Water Proof Protection : IP 65- Input Voltage : 180 V To 265 VAC- Colour Index : >70 CRI- Power Factor : >0.95- Colour : White including all accessories as required for complete installation
4
6082
24331.44
... More
Supply, fixing, testing and commissioning of 6 M tubular poles of approved Make Sheet thickness 3 mm, pitch circle dia (PCD) of 200 mm, Base plate diamentions 200mm length x 200mm bredth x 12mm thickness, EN8 grade Foundation bolts of size 4 x 16 mm dia, having bolt length of 450 mm. The Poles shall be designed to withstand the maximum wind speed as per IS 875. The pole shaft be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The Poles shall have door of approximate 500 mm length at the elevation of 500 mm from the Base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connections. The door shall be flush with the exterior surface and shall have suitable locking arrangement. There shall also be suitable arrangement for the purpose of earthing. Material HT Steel Conforming to grade S355JO.Base Plate Fe 410 conforming to IS 226 / IS 2062Foundation Bolts EN.8 grade (Make - Bajaj, GE or equivalent). The poles shall be hot dip galvanised as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 85 micron. The galvanizing shall be done in single dipping. The pole shall be with one arm for fixing two nos 50 W LED fixture. Make (Lighting Technologies Adornis Min 45W 5700K street light with wide beam or equivalent). The poles shall be erected in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required and embedding required size dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry and outgoing including bending the pipe to the required shape complete as required.
10
34543
345432.9
... More
Supply, fixing, testing and commissioning of 6 M tubular poles of approved Make Sheet thickness 3 mm, pitch circle dia (PCD) of 200 mm, Base plate diamentions 200mm length x 200mm bredth x 12mm thickness, EN8 grade Foundation bolts of size 4 x 16 mm dia, having bolt length of 450 mm. The Poles shall be designed to withstand the maximum wind speed as per IS 875. The pole shaft be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The Poles shall have door of approximate 500 mm length at the elevation of 500 mm from the Base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connections. The door shall be flush with the exterior surface and shall have suitable locking arrangement. There shall also be suitable arrangement for the purpose of earthing. Material HT Steel Conforming to grade S355JO.Base Plate Fe 410 conforming to IS 226 / IS 2062Foundation Bolts EN.8 grade (Make - Bajaj, GE or equivalent). The poles shall be hot dip galvanised as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 85 micron. The galvanizing shall be done in single dipping. The pole shall be with two arms for fixing two nos 50 W LED fixture. Make (Lighting Technologies Adornis Min 45W 5700K street light with wide beam or equivalent). The poles shall be erected in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required and embedding required size dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry and outgoing including bending the pipe to the required shape complete as required
3
43864
131592.57
... More
Supply, fixing, testing and commissioning of 6 M tubular poles of approved Make having top dia 70 mm, bottom dia 130 mm, Sheet thickness 3 mm, pitch circle dia (PCD) of 200 mm, Base plate dimentions 200mm length x 200mm bredth x 12mm thickness, EN8 grade Foundation bolts of size 4 x 16 mm dia, having bolt length of 450 mm. The Octagonal Poles shall be designed to withstand the maximum wind speed as per IS 875. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The octagonal Poles shall have door of approximate 500 mm length at the elevation of 500 mm from the Base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connections. The door shall be flush with the exterior surface and shall have suitable locking arrangement. There shall also be suitable arrangement for the purpose of earthing. Material Octagonal Poles HT Steel Conforming to grade S355JO.Base Plate Fe 410 conforming to IS 226 / IS 2062Foundation Bolts EN.8 grade (Make - Bajaj, GE or equivalent). The poles shall be hot dip galvanised as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 85 micron. The galvanizing shall be done in single dipping. The pole shall include two arms for fixing including two numbers LED street light luminaire power consumption 50W (one light at 6m height and one light at a height of 4m), luminaire output of 6800 lumens with luminaire efficacy > 120 lm/W. The luminaire shall have a finless design and shall have pressure diecast housing and polycorbonate cover with high impact resistance confirming IP65 and IK07. The luminaire shall have an integrated optics to provide uniform light distribution on the street. The luminaire shall have a wide operating voltage in the range of 100 - 270V, power factor >0.95, CCT 5700 K, CRI>70, internal surge protection 4 kV. The luminaire shall have 50,000 burning hours as per L70B50 criteria. The luminaire shall have high voltage cut off and auto restart option and 440 V stress voltage protection. The luminaire shall have Class -1 Electrical safety and be BIS tested and approved and test certificates of LM79 and LM80 reports shall be submitted
4
43864
175456.76
... More
EARTHING
-
-
-
... More
Supply and laying the following sizes of strips laid 0.6 m below ground level including excavating trench of suitable size and refilling ,including necessary clamps and bolts etc and all accessories as required for complete installation as instructed by engineer in charge/consultant.
25x3mm Cu strips tinned at the point of contact
25x3mm Cu strips tinned at the point of contact
40
739
29595.6
... More
Supply and laying the following sizes of strips on cable tray (2 runs of Cu strip) or wall surface, including necessary clamps (each clamp not exceeding 60 cm) and bolts etc as required for complete installation as instructed by engineer in charge/consultant. Cu wire No.10 SWG
70
97
6825.700000000001
... More
Providing coil/spring earthing using 2 runs of 8 SWG, Cu wire for street light pole etc. Cu wire buried to a minimum depth of 1.5m, with excavation, refilling and connecting Cu wire to pole using bolt and nut complete including all accessories required.(For bollards, post tops, street lighting poles etc)
360
204
73692
... More
CIVIL WORK
-
-
-
... More
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete
2
202
405.5
... More
CIVIL WORK
-
-
-
... More
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling
etc. as required Above 4.5 meter and upto 6.5 meter
etc. as required Above 4.5 meter and upto 6.5 meter
17
4994
84899.19
... More
ELV ( CCTV SYSTEM)
-
-
-
... More
Supply, Installation,testing and commissioning of 3.6 mm fixed lens ,2MP , IR Dome camera with motion sensor, 20 Meter Distance, 120 db WDR POE and with all connectors and necessary accessories for mounting in True/false ceiling
6
5999
35994.659999999996
... More
Supply, Installation,testing and commissioning of Outdoor type Varifocal Bullet Camera with weatherproof enclosure, 2 MP, built-in IR LED with motion sensor, 30 Meter Didistance, 120db WDR , 2.8-12 mm POE ,IP 67 ,Vandal proof with all connectors and necessary mounting accessories for external areas.
4
16101
64405.52
... More
ELV ( PASSIVE NETWORKING)
-
-
-
... More
Supply and laying of 6 Core Multi Mode Fiber Cable, OM4 . The works shall be done as per the instructions of site incharge.
80
252
20203.2
... More
Supply and installation of 6U, 500mm x 550mm closed rack with all required accessories Horizontal cable manager, front and back perforated doors, side panels, locks and required fans. Mounting hardware kit.
1
10203
10203.38
... More
Supply, installation, testing and commissioning of PVC PIPES AND ACCESSORIES for CCTV. The works shall be done as per the instructions of site incharge.
80
218
17496
... More
Supply, installation, testing and commissioning of ACTIVE SWITCHES. The works shall be done as per the instructions of site in charge.
1
14231
14231.71
... More
Supply, installation, testing and commissioning of 4-pair, Cat6 UTP Cable, roll of 305m, UL Listed Gray.The works shall be done as per the instructions of site incharge
610
40
24430.5
... More
Supply, installation, testing and commissioning of Patch code 3m done as per the instructions of site incharge
12
25
310.56
... More
Supply, installation, testing and commissioning of Patch code 1m done as per the instructions of site incharge.
12
17
211.79999999999998
... More
Supply, installation, testing and commissioning of Cat6 IO be done as per the instructions of site incharge
12
247
2964.7200000000003
... More
Supply, installation, testing and commissioning of Unloaded 24 port Patch Panel be done as per the instructions of site incharge.
1
8823
8823.53
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%