Infopark Tender

Dismantling water closet carefully, clearing away and stacking the material in the stockyard within infopark campus as per directions of Engineer-in-charge.

Dismantling wash basin, sink etc. carefully, clearing away and stacking the material in the stockyard within infopark campus as per directions of Engineer-in-charge.

Dismantling Pillar cock , angle cock, health faucet, sink tap etc. carefully, clearing away and stacking the material in the stockyard within infopark campus as per directions of Engineer-in-charge.

Dismantling Consealed pipe line carefully, clearing away and stacking the material in the stockyard within infopark campus as per directions of Engineer-in-charge.

Dismantling mirror carefully, clearing away and stacking the material in the stockyard within infopark campus as per directions of Engineer-in-charge.

Dismantling Granite pantry counter carefully, clearing away and stacking the material in the stockyard within infopark campus as per directions of Engineer-in-charge.

Dismantling of existing window/door blinds including stacking in dumping yard outside the campus as per directions of Engineer-in-charge.

Providing and laying cement concrete 1:2:4 using stone aggregate 20 mm nominal size etc. complete as per directions of Engineer-in-charge.

Reinforced cement concrete work in beams, suspended floors, roofs, having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level, excluding the cost of centering and shuttering, finishing and reinforcement, with 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for lintel

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels using Thermomechnically treated bars of grade Fe500D or more

Solid block masonry using precast solid blocks factory made of size 40x20x10 cm or nearest available size confirming to IS 2185 part 1 of 1979 for superstructure of thickness 10 cm and above in CM 1:6 etc complete as per directions of Engineer-in-charge.

Excavation of rammed earth below the PCC layer at Toilet area upto the sunken slab and Refilling, ramming and watering properly the same area after laying unken pipes at toilet areas.

Providing and laying vitrified floor tiles of size 1200x1800 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water base) confirming to IS 15477 in average 6mm thickness, including epoxy grouting the joints with white cement and matching pigments etc., complete as per directions of Engineer-in-charge. (Basic rate of tile not less than Rs. 169/-/sq ft)

Providing and laying vitrified floor tiles of size 900x900 / 1000x1000 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water base) confirming to IS 15477 in average 6mm thickness, including epoxy grouting the joints with white cement and matching pigments etc., complete as per directions of Engineer-in-charge. (Basic rate of tile not less than Rs. 160/-/sq ft)

Providing and fixing 18 mm thick granite gang saw cut mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc complete at all levels as per directions of Engineer-in-charge (Basic rate of granite not less than Rs. 123/- /sq ft)

Providing edge moulding to 18 mm thick granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge

Providing and laying vitrified wall tiles of size 1200x1800 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including 1cm thick beading matching to the tile colour, complete as per directions of Engineer-in-charge. (Basic rate of tile not less than Rs. 169/- per sq ft)

Supply and fixing of vinyl flooring of approved make, colour and pattern over existing floor with suitable adhesive including preparation of surface all complete as per direction of Engineer - in - Charge. (Basic rate of Vinyl not less than Rs. 38/- per sq ft)

Supply and fixing of wooden flooring by using 8mm thick veneer/ PVC coated decorative planks of approved make, colour and pattern over existing floor with suitable adhesive including preparation of surface all complete as per direction of Engineer - in - Charge. (Basic rate of wooden planks not less than Rs. 145/- per sq ft)

Rough plastering for dadoing - Providing 6 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished rough to receive dadoing etc. complete as per directions of Engineer-in-charge.

Providing and fixing at all height false ceiling conforming to IS:2095 (BS 1230) including providing and fixing of frame work made of special sections power pressed from GI sheet and galvanized in accordance with zinc coating of grade 350 as per IS:277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm dia x 40mm long with 6 mm dia bolts to the angle hangers of 25x 25x 0.55 mm of required length, and other end of angle hanger being fixed with nut and bolts to GI channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to GI channel with connecting clips made out of 2.64mm dia x230 mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20 mm and 30 mm long, The perimeter of ceiling shall be fixed to wall / partition with the help of raw plugs at 450 mm centre to centre with 25 mm long drive-all screws @ 230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finisher and two coats acrylic emulsion paint over two coats of primer suitable for gypsum board as per manufacturers specification after application of E-Mix / Pop / Gypsum putty and all as per manufacturer’s specification etc complete and all as directed.and also including the cost of making openings for light fittings, grills, diffusers, trap doors, cutouts made with frame of perimeter channels suitably fixed all complete as per specification and direction of the Engineer-in-charge. Vertical areas in drop ceiling will be measured separately.

12.5 mm thick tapered edge gypsum plain board

Moisture resistant board

Providing and fixing wooden boxed ceiling of size upto 10x10cm as per requirement using decorative veneer faced plywood 4 mm thick conforming to IS:1328 (type-1) with necessary aluminium frames and all accessories, screws etc for fixing , inlcuding priming coat on unexposed surface of plywood etc complete as per directions of Engineer-in-charge. (Basic rate of veneer not less than Rs. 136/- / sq ft)

Providing and fixing 12mm thick plywood boxed paneling in wall/ ceiling using flooted panelling materials. plywood partition shall be fixed with 18mm thick plywood frames and all accessories, screws etc for fixing , inlcuding priming coat on unexposed surface of plywood etc complete as per directions of Engineer-in-charge.

Supply and Installation of Modular acoustic panels /Tile (Eco Panel board) of size 1200mmx 2400mm. 9 mm thk Eco board to be fixed over on gypsum partition / Wall. Cost inclusive of providing 6X6 mm Aluminium "U" channel section to achieve uniform groove between gypsum and Eco board panelling. Eco boards to be cut and installed to achieve the pattern and including all acsessories like clips and screws as recommended by manufacturer. Basic Price - Rs.2797/- per Sheet. Make: Art & Design / Senses / Rock worth

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface etc complete as per directions of Engineer - in - charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per directions of Engineer - in - charge.

Providing and applying plaster of paris putty of 2mm thickness to prepare the surface even and smooth complete as per direction of Engineer-in-charge.

Painting two or more coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour as per directions of Engineer-in-charge.

Providing & applying two coats of wall texture painting with acrylic emulsion paint of approved brand and manufacture to give an even shade over two coats of suitable primer as per directions of Engineer-in-charge. (Basic rate of texture paint not less than Rs. 120/- per sq ft)

Providing & applying of Melamine polyshing works for existing wood works with one or more coats of puty for puchering, sandering for smooth and two coats of suitable primer and one or more coats of polyshing adhesive as per the manufacturer instruction given for smooth finishing including hire charges of spraying machine, materials, labours etc. complete as per the directions of Engineer -in- Charge.

Glass film : Fixing to glass panels using 3M film stickers of approved model and colour as per required pattern and shape and as directed. The vendor shall submit required warranty certificates from the manufacture. (Basic rate of film not less than Rs. 105/- per sq ft)

Glass film : Fixing to glass panels designer 3M film stickers of approved color, design etc as per required pattern and shape and as directed. The vendor shall submit required warranty certificates from the manufacture. (Basic rate of designer film not less than Rs. 257/- per sq ft)

Wall paper: Fixing to wall partition wall paper of approved colour, Design etc as per required pattern and shape and as directed. The measurement will be measured for elevation area. (Basic rate of wall paper not less than Rs. 125/- per sq ft)

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. The frames shall be fixed in existing opening including with dash fasteners/ chemical fasteners of appropriate size ( 3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including cost of dash fasteners/ chemical fastener etc. complete as per directions of Engineer-in-charge.

Providing and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames, Handles latch with/without lock (as per site condition) with 2 keys, door closer, tower bolt etc. complete as per directions of Engineer-in-charge.

Providing and Fixing Flush door of size 100 X 210cm, door shutter with laminate finish, vision panel, architrave and hardwares. The rate includes material cost, labour charge, transportation,etc. as per the directed by Engineer-incharge.

Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed with stainless steel flat headed mirror screw and washers complete etc. as per directions of Engineer-in-charge. (approx. size of mirror - 550mm x 750mm)

Providing and fixing white vitreous china extended wall mounting water closet of approved make and suitable size of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including P trap, soft close seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Works including cutting and making good the walls /floor wherever required, including cost and conveyance of all materials to the site, all labour charges, all taxes etc., complete finished item of work and as directed by the SiteEngineer/Project In-Charge. The side gap between ewc mouth and pan connector to be filled with silicon sealant. (Basic rate of water closet not less than Rs. 10,339/-)

Providing and fixing washbasin with integrated half pedestal of approved make and colour along with CP fittings of approved make such as 15mm CP brass pillar cock, 15mm CP brass angular stop cock, 32mm dia CP brass waste coupling, 32mm dia CP brass bottle trap with extension pipe including necessary supporting brackets, connection tube etc; complete. The supporting brackets, bolt and nuts supplied by the contractor. Works including cutting and making good the walls /floor wherever required, including conveyance of all materials to the site, all labour charges, all taxes etc; complete. (Basic rate of wash basin not less than Rs. 9,407/-)

Supplying and fixing CP Health Faucet of superior quality including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. (Basic rate of health faucet not less than Rs. 1,356/-)

Supplying and fixing CP Angle cock of superior quality including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. (Basic rate of angle cock not less than Rs. 1017/-)

Supplying and fixing of CP Anti cockroach floor trap gratings which consisting floor drain grating, inner filter and out filter and rim, fixed over the floor trap. Works including cleaning of floor traps before fixing the gratings. While fixing the gratings, flooring should be cut to required size of grating, (not more than 2mm of the grating sizes) using tile cutter etc; complete. The gap should be filled silicon sealant to match the flooring color. The color and shape of the gratings shall be got the approval from Infopark. To avoid damage of the cp gratings, acid cleaning of flooring shall be done before fixing of gratings.

Supplying, fixing and testing of 110 mm dia SS Floor clean out used in sunken floors, 75 or 110 mm dia extension boss tee arrangements.

Providing, fixing and testing of approved make 40mm dia PVC ball valve as perdirection of Engineer-in- charge. Valves shall be complete with position indicator and locking device; of approved make.

Providing, fixing and testing of approved make 32mm dia PVC ball valve as perdirection of Engineer-in- charge. Valves shall be complete with position indicator and locking device; of approved make.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. After laying the pipes, before closing the pipes, Pressure test to be conducted and get the approval from the Engineer-in-charge. Internal work- Concealed work, including cutting chases and making good the walls etc.

20 mm nominal outer dia pipes

25 mm nominal outer dia pipes

32 mm nominal outer dia pipes

Providing and fixing of approved make of 50 mm dia 10kgf/cm2 PVC pipes confirming to IS 4985-2000. and fittings (moulded and fabricated fittings ) such as tee, elbow, 'y', coupler, etc confirming to IS 7834 with latest amendment for soil and waste pipe works in toilets and utility area, etc complete. Pipes shall be laid in sunken floors with proper gradient with proper brick pedestal supports. For laying the pipes in walls, before chasing, the pipe line routing shall be marked using chalk line with the help of Hilti make leveling instrument; wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and redoing the same with water proofing components to the entire satisfaction of Engineer-in-charge, etc complete. All the stub outs shall be closed with proper end caps until the installation of Sanitarywares and accessories etc; complete.

Providing, fixing and testing of approved make of 75 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (avialable fittings in market and fabriacted fittings ) such as tee, elbow, 'y' , coupler, etc. confiming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved layout with proper allignment and gradient as per the layout with proper split clamp,anchor fastener and 10mm thread rod supports.Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement morter. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitraywares and accessories etc. complete.

Providing, fixing and testing of approved make of 110 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (avialable fittings in market and fabriacted fittings ) such as tee, elbow, 'y' , coupler, etc. confiming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid sunken in floors and in vertical stack as per approved layout with proper allignment and gradient as per the layouts with proper split clamp, anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved make solvent cement. After laying the pipes, before cloasing the pipes, gravity test to be conducted and got the approval from the Engineer-in-charge. chased portions shall be covered with cement morter. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitraywares and accessories etc. complete.

Engaging labours for undertaking miscellaneous work.(muster roll and reports shall be maintained) as per directions of Engineer-in-charge

Coolie

Mason

Painter

Supply and wiring for light wiring along with earth wire using 3 Runs of 1.5 sqmm multi stand FRLS PVC insulated copper conductor, single core cable in surface/ recessed Medium PVC conduit/flexiable conduit as required.(from DB to switch/switch to light/light to light)

Supply and wiring for circuit/ submain wiring along with earth wire using 3 Runs of 2.5 sqmm multi stand FRLS PVC insulated copper conductor, single core cable in existing pvc / flexiable conduit as required.

Supply and laying of following size PVC conduits in floor / wall /ceiling etc. including necessary bends,elbow,etc, in concealed system below the false ceiling on wall/floor and open system on above false ceiling.(for general purpose, UPS & for work station etc.) The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface - 20 mm

Supply and laying of following size PVC conduits in floor / wall /ceiling etc. including necessary bends,elbow,etc, in concealed system below the false ceiling on wall/floor and open system on above false ceiling.(for general purpose, UPS & for work station etc.) The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface - 25 mm

Supply and laying of following size PVC Flexible conduits including necessary bends,elbow,etc, in concealed system below the false ceiling on wall/floor and open system on above false ceiling.(for general purpose, UPS & for work station etc.) The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface - 20 mm

Supply and laying of following size PVC Flexible conduits including necessary bends,elbow,etc, in concealed system below the false ceiling on wall/floor and open system on above false ceiling.(for general purpose, UPS & for work station etc.) The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface - 25 mm

Supply, fixing, testing and commissioning of 4 no of 6A modular switches for lights with 1 No: of 4 module front plate along with back box if required

Supply, fixing, testing and commissioning of 3 no of 6A modular switches for lights with 1 No: of 3 module front plate along with back box if required

Supply, fixing, testing and commissioning of 12 no of 6A modular switches for lights with 2 No's of 12 module front plate along with back box if required

Supply, fixing, testing and commissioning of 1 no of 6/16 A Universal (Flat type/Round type) modular socket and individual 5/6A switch 1 No: with modular box and faceplate

Supply, fixing, testing and commissioning of 2 nos of 6/16 A Universal (Flat type/Round type) modular socket and 2 nos of individual 5/6A switch with modular box and face plate

Supply & installation of 36W LED (Recessed mount type suitable for 2X2 grid ceiling) light fixtures using efficient optics system lumen, fully acrylic LED luminaire, CRCA housing with high efficiency opal diffuser, zero maintenance, zero mercury System Wattage: 36Watts Efficiency 100 lumen/Watt CRI 75%. (Model: Havells VENUSNEOHE2x2R36WLED857 or Equivalent)

Supply & installation of 15W LED round light fixture(Recessed mount type)with cool day light (Model: Havells ENDURA NEO DLR 15W LED 840 MOD or Equivalent)

Supply and installation of Aluminium profile lighting system including aluminium profile, covering membrane, Strip light and drive (Model: Aluminium profile code: LPL4320, Strip light code: LPLS120, Drive code:Luker LPLSD03 or Equivalent)

Supply & installation of Cove/Strip light 25W of 5M LED Warm white with Driver and with all accessories (Model: Wipro Garnet D42840-1 or equivalent)