Infopark Tender

Installation, testing and commissioning of EV charger ranging from 7.2kW to 7.5kW AC having Type 2 charger (IP54 or above) . Rate includes configuration of billing software/ billing app

Supply of EV Charger 10kW ( 3 Phase) Type 2 Triple socket oulet (Bharat AC001/10KW) for 2 wheelers , which can support RFID, Bluetooth, Ethernet, Wi-Fi connectivity for billing/daily monitoring, charger. Compactable with Open Charge Point Protocol (OCPP). Each socket will be 230V , 16A. Charger includes Surge Protection, Over Voltage, Under Voltage, Over Current, Short Circuit,Over Temperature, Ground Fault, Residual Current. Over Temperature,Emergency Stop Warranty of EV charger - 2 years

Installation, testing and commissioning of 2 wheeler EV charger . Rate includes configuration of billing software/ billing app

Fabrication, supply, erection, testing and commissioning of cubicle type, outdoor double door type (IP55)dust and vermin proof, floor mounted, front operated MV Main panel board made out of 14 SWG thick CRCA sheet (11 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. 320A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 set. Ammeter with selector switch-1 set.Voltmeter with selector switch - 1 set. RYB phase indicating LED lamps with control fuses and switches - 1 set for all Incoming and outgoing feeders.

Incomer - 320 A, 25kA, FP Thermal Magnetic Based MCCB

Outgoing - 125A, 16kA, TP+N Thermal Magnetic Based MCCB

Outgoing - 40A, 16kA, TP+N Thermal Magnetic Based MCCB

RCCB/RCBO With Enclosure - Supply and fixing of following RCCB's in existing enclosure complete with all accessories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation. - 125A ,4P Type- AC RCCB with earth leakage protection of 300mA AC.

RCCB/RCBO With Enclosure - Supply and fixing of following RCCB's in existing enclosure complete with all accessories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation - 40A ,2P Type A RCBO with earth leakage protection of 30mA AC and 6 mA DC

RCCB/RCBO With Enclosure - Supply and fixing of following RCCB's in existing enclosure complete with all accessories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation - 40A ,4P Type- AC RCCB with earth leakage protection of 300mA AC.

Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured stranded Cu conductor power cable -4C X 50Sq.mm Cu Cable

Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured stranded Cu conductor power cable 4C X 4 Sq.mm Cu Cable

Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured stranded Cu conductor power cable confirming to IS 7098 (part 1) amended up to date-2C X 6 Sq.mm Cu Cable

Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured stranded Cu conductor power cable confirming to IS 7098 (part 1) amended up to date-1C X 50 Sq.mm Cu flexible Cable(Green colour)

Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured stranded Cu conductor power cable confirming to IS 7098 (part 1) amended up to date-1C X 4 Sq.mm Cu flexible Cable( Green colour)

Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured stranded Cu conductor power cable confirming to IS 7098 (part 1) amended up to date -1C X 6 Sq.mm Cu flexible Cable( Green colour)

Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) amended up to date -3.5C X 185 Sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 3.5C X 185 Sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing Trench / RCC / Hume / Metal pipe as required.3.5C X 185 Sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing Trench / RCC / Hume / Metal pipe as required - Up to 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing Trench / RCC / Hume / Metal pipe as required - Above 35 sq. mm and up to 95 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.Up to 35 sq. mm (clamped with 1mm thick saddle)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. Above 35 sq. mm and up to 95 sq. mm (clamped with 25x3mm MS flat clamp)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. Above 185 sq. mm and up to 400 sq. mm (clamped with 40x3mm MS flat clamp)

Supplying and making end termination s for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.3.5C X 185 Sq.mm

Supplying and making end termination s for following size of PVC insulated and PVC sheathed / copper conductor cable of 1.1 kV grade as required -4C X 50Sq.mm Cu Cable

Supplying and making end termination s for following size of PVC insulated and PVC sheathed / copper conductor cable of 1.1 kV grade as required -4C X 4 Sq.mm Cu Cable

Supplying and making end termination s for following size of PVC insulated and PVC sheathed / copper conductor cable of 1.1 kV grade as required - 2C X 6 Sq.mm Cu Cable

Supplying and making end termination s for following size of PVC insulated and PVC sheathed / copper conductor cable of 1.1 kV grade as required -1C X 50 Sq.mm Cu Cable(Green colour)

Supplying and making end termination s for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade as required - 1C X 4 Sq.mm Cu Cable( Green colour)

Supplying and making end termination s for following size of PVC insulated and PVC sheathed / copper conductor cable of 1.1 kV grade as required - 1C X 6 Sq.mm Cu Cable( Green colour)

Supply,installation ,testing and comissioning of maintenance free earthing using 4 mtrs length,17.2mm dia 250 microns molecularly copper bonded steel rod, stainless stell connectors and fasteners for connecting earth strip.The earth electrode shall be filled with earth enhancing compound (12.5 kg mineral compound / 22.6 kg low resistivity graphite compound).FRP (UFE FRP)Earth electrode inspection chamber with heavy duty cover should be used to cover the Earth Rod. The dimension shall be 300mmx 300mmx 300mm with a weight bearing capacity of 15KN.The item shall be inclusive of installation charges,including digging bore,providing all required accessories like terminal connector,screw for fixing earth pit cover etc.

Providing and fixing GI/ strip/wire on surface or in recess for connections etc. as required. 25x6 GI

Preparation of drawings as per site conditions, the same shall be approved by Infopark. Obtaining approval from Statutory Authorities, Preparation of statutory drawings, Completion Report, Arranging for Inspection, attending defects report and obtaing scantion order for energisation from Electrical Inspectorte. Power connection application of KINESCO to be filled and signed from licened contrator. Note: All statutory fees shall be paid by client

Non comprehensive AMC for DC and AC chargers for 1st year after the completion of warranty of charges (charger warranty is 2 years)

Non comprehensive AMC for DC and AC chargers for 2nd year

Non comprehensive AMC for DC and AC chargers for 3rd year