Indian Oil Adani Gas Private Limited Tender

Chair - .seat assembly I msfr up of 1.2+_0.1 cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18,upholstered with fabric upholstery covers and Moulded Polyurethane foam. SEAT SIZE (FOR 7501 RG ,7502 RG,7512 RG) 47 cm (w) x48 cm D BACK ASSEMBLY -The back asembly is made of powder coated tubular frame dia 2.54 +_ 0.03 cm x 0.2 +_0.026 cm thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back is upholstered using net fabric with high tenacity yarn. HIGH RESILIENCE (HR) POLYURETHANE FOAM - The HR polyurethane foam is moulded with density = 45+/-2 kg/m3 and hardness load 16+_ 2 kgf as per IS 7888 for 25% compression. ARMSETS - the one piece armrests are injection moulded from black co-polymer polypropylene.CENTRE-TILT MECHANISM ( FOR 7501 RG,7502 RG) - the mechanism is designed with the following features- 360 deg revolving type - 17 deg +_ 2deg maximum tilt on pivot at centre. - Upright position locking. - Tilt tension adjustment. TUBULAR FRAME (FOR 7512 RG) The powder coated tublar fdrame is cantilever type & made dia 2,54 +_ 0.03 cm x 0.2+_ 0.016 cm thk.MS.ER.W Tube. PNEUMATIC HEIGHT ADJUSTMENT (FOR 7501RG,7502 RG) - The pneumatic height adjustment has an adjustment stroke of 11.0 +_ 0.3 cm. TELESCOPIC BELLOW ASSY (FOR 7501 RG , 7502 RG ) - The bellow is 3 pece telescopic type and injection moulded in black polypropylene. PEDESTAL ASSEMBLY (7501 RG,7502 RG) - The pedestal is injection moulded in black 33% glass filled Nyllon 66 and fitted with 5 nos. twin wheel castors.pedestal is 66.3 +_ 0.5 cm . pitch centre dia .( 76.3 +_ 1 cm with castors). TWIN WHEEL CASTORS (FOR 7501 RG, 7502 RG ) the twin wheel castors are injection moulded in blac nylon. model FULL BACK - OXBO ENH FULL BACK (7502RG)

manger chair - make Godrej .seat assembly I msfr up of 1.2+_0.1 cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18,upholstered with fabric upholstery covers and Moulded Polyurethane foam. SEAT SIZE (FOR 7501 RG ,7502 RG,7512 RG) 47 cm (w) x48 cm D BACK ASSEMBLY -The back asembly is made of powder coated tubular frame dia 2.54 +_ 0.03 cm x 0.2 +_0.026 cm thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back is upholstered using net fabric with high tenacity yarn. HIGH RESILIENCE (HR) POLYURETHANE FOAM - The HR polyurethane foam is moulded with density = 45+/-2 kg/m3 and hardness load 16+_ 2 kgf as per IS 7888 for 25% compression. ARMSETS - the one piece armrests are injection moulded from black co-polymer polypropylene.CENTRE-TILT MECHANISM ( FOR 7501 RG,7502 RG) - the mechanism is designed with the following features- 360 deg revolving type - 17 deg +_ 2deg maximum tilt on pivot at centre. - Upright position locking. - Tilt tension adjustment. TUBULAR FRAME (FOR 7512 RG) The powder coated tublar fdrame is cantilever type & made dia 2,54 +_ 0.03 cm x 0.2+_ 0.016 cm thk.MS.ER.W Tube. PNEUMATIC HEIGHT ADJUSTMENT (FOR 7501RG,7502 RG) - The pneumatic height adjustment has an adjustment stroke of 11.0 +_ 0.3 cm. TELESCOPIC BELLOW ASSY (FOR 7501 RG , 7502 RG ) - The bellow is 3 pece telescopic type and injection moulded in black polypropylene. PEDESTAL ASSEMBLY (7501 RG,7502 RG) - The pedestal is injection moulded in black 33% glass filled Nyllon 66 and fitted with 5 nos. twin wheel castors.pedestal is 66.3 +_ 0.5 cm . pitch centre dia .( 76.3 +_ 1 cm with castors). TWIN WHEEL CASTORS (FOR 7501 RG, 7502 RG ) the twin wheel castors are injection moulded in blac nylonspec. model HIG BACK - OXBOENH HIGH BACK (7501RG)

Settee 3 seater (Sofa) - frame with marine ply wood of thick 12 mm and supported ply wood of varies thick as per the design and bending with anti pest red gum wood . Zig zag spring with elastic with cussion base. Using 40 density form fo seat and rest portion 28 density with super sof t form using for soft effects and good quality home leather fabric to match the interior and one teapy. that is made by marine plywood , grade as mention above work and top with glass.

Partition - Using 48 mm size of .40thick stud to be placed at 610 mm gap centre of 50 mm floor and ceiling channel of flange 32 mm over the frame work GYPsum boar of Saint Gobian Gyproc sheet of 6x4 ft of thick 12.5 mm board place both side with fastners and joint filled with join compound and fibre mesh. And in half partition (Cubicals) top of the partition providing a lip with ply wood and mica

Cabin Door - Door opening area strengthen with GP metal frame and Galss door fixed on the frame support with patch. Using 12 mm toughend Saint gobain or other equivalent make clear glass for door and accessories of Dorma/Ozone or other equivalent brand of door top, bottom pactch with floor spring of 100 kg capacity. the door will have Handle and Lock. size of door 7x3.25 ft

Main Door - Using 12 mm toughend Saint gobain or other equivalent make clear glass for door and accessories of Dorma/Ozone or other equivalent brand of door top, bottom pactch with floor spring of 100 kg capacity. the door will have Handle and Lock. size of door 7x3 ft.of two door and the wall area will be paneling with marin ply wood of Archied /Century or other Eqyalivalant quality of GRADE 710 of thick 8mm and 0.8mm mica of green lam/other equvilant brand pasted in feveicol heatex .

Pargola - making the frame with GP 16 gage appolo or other equivalnt brand 4x2" section for main section and crossection witn 2x1" of GP section Painted with enamel of make Asain/ Berger or other equivalent quality of 2 coat and before the paint finish one coat epoxy primer will be coated. over the frame work 12 mm saint gobian toughened glass fixed with Double side tape of 3M or other equivalant quality material available in market . frame work will be fixed on wall with 6mm MS plate and fastner of ancher bolt of 8mm and each joint will finish with body filler before painting.

AC - Supplying and fixing Air Condition on Work station area and Manager cabin and Conference hall . On work area 2 Tone of 2 Nos, and Visitor area 1.5 tone of 1 Nos., Manager cabin 1 tone - 1 Nos, Conference Hall 1.5 Tone of 1 Nos. and 1 ton – 1Nos for Total – 9 tone. of Voltas/ Panasonic. Including fitting all accessories.

Manger Table - Making the table with 710 Marine plywood of Archied /Century or other Eqyalivalant grade of 15/16 mm thick plywood top and side work. Using good quality of Ebco /other equvalant quality auto closer hings for doors and slider for drawer. SS handle and multi purpose Lock of Goderaj or other Equivalant brand. top of the ply wood .1mm mica of green lam/other equvilant brand for table top and other area. rest area we use inner mica instant of painting to get good finish . Mica will be pasted and pressed with Feveical Heatexadhesive and the edges of table fix edge band same color which is suitable to match the interior color. and the table will have a tile table space with 6mm glass on top

Conference table - Making the table with 710 Marine plywood of Archied /Century or other Eqyalivalant grade of 15/16 mm thick plywood top and side work.top of the ply wood .1mm mica of green lam/other equvilant brand for table top and other area. rest area we use inner mica instant of painting to get good finish . Mica will be pasted and pressed with Feveical Heatexadhesive and the edges of table fix edge band same color which is suitable to match the interior colormaterial and with 6mm glass on top. conference table will capsul or oval shape. Table will have no storage facility.

UPS - Make of Nislight Tech Spec. input- single phase. Output – 220v+/-3% DC volt 180V. IGBT PWM Technology transformer based Isolated I – Inverter section. Copper transformer with warranty 2 years. Battery Make - M power C10 Grade plate – 3 Years warranty. Rate including installation. Details: UPS -7.5 KV 150AH C10 Tubular battery 15 Nos. Back up – 6 Hours for 20 computers

Electrical wiring & Data network Cabling for computers ( Work station, Office & Meeting room ) - Using Good Quality of Cable ( Havel’s, Finolex or other equivalent quality make for wiring and each computer have 2 Socket, and one Switch (20 systems) with UPS wiring and net work cabling for computer with cat 6 cable. 150AH C10 Tubular battery 15 Nos. Back up – 6 Hours for 20 computers. Rate Include material and labour charge. Work station point to DB rate quoted only for 20 computer wiring

Aluminium Door - Using 2.5 x 1.5 plane section for frame work and making door with door vertical for vertical section and door bottom , top and divider section using for making door inside with Hylem or 5.5 mm clear glass . Size of door 7 x 2.5 ft . server room

Door - making the door with marin plywood of 710 garde with mica and all acceries like lock , Handle and hingssize 7 x 2.5 ft. this door is from workspace to server, pantry and toilet area

Rack- making rack with 710 grade Marine ply wood of thick 15mm of 7ft height and legth of 7 feet and depth 1 ft with door . door making with 15mm plywood and fixed with Auto closer hings of ebco or other equivalant quality of material and handle of S S make and lock of goderaj or other equal make . Cupboard outer will finish with mica of 1mm of above mentioned brands and inside with inner mica as per the suggested colo

Painting - using good quality of Asain/berger or any other equivalent brand of exterior emulsion 2 coat finish inside the room and front area. Before the painting area cleaned by using sand paper and rub with cloth to remove dust from the surface.and Painting will be done with roller and brush