HLL Lifecare Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Summary
Construction Of New Sub-treasury Building At
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HLL_691556_2Tender No
HLL/CHO/PROJ/EXT/DoT/ST/CKDYTender Authority
HLL Lifecare Limited ViewPurchaser Address
-Website
http://http://www.lifecarehll.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of new Sub-Treasury building at Chalakkudy, Thrissur
BOQ Items
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth
1
1994
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
29.25
214
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
241.16
296
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
291.71
258
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
44.19
6814
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
62.91
9085
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
33.85
10954
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
68.13
11492
-
Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
8.36
11065
-
Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).
8.36
82
-
Anti termite treatment over finished earthen floor before 3-15 hrs of concreting by applying ATT solution using quality sprayers in prescribed ratio as recommended by the manufacturer including supply of AT solution, Application, Covering of applied surface for 2 hrs with polythene sheet etc all required as per the instruction of engineer in charge.
250
76
-
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
78.4
335
-
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
278.2
717
-
Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
158.76
863
-
Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)
27.45
732
-
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
467.68
815
-
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
97.04
649
-
Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
39.07
902
-
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo - Mechanically Treated bars of grade Fe-500D or more
5715
98
-
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo - Mechanically Treated bars of grade Fe-500D or more
10140
98
-
Supplying and fixing galvanized iron twisted steel wire mesh with hexagonal openings (Chicken Mesh) before plastering in the connection surface of columns, beams and walls to prevent cracks with additional thickness for plastered surface with neat finish including fixing arrangements all complete as per the direction of Engineer in charge.
378
65
-
Block work and Finishing Work
-
-
-
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
110.95
6644
-
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete
9.65
6970
-
Hollow block masonry using pre cast blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
7.55
5337
-
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 ( 1 cement : 6 coarse sand)
321.75
357
-
12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand)
829.48
310
-
12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
178.86
401
-
6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
448.07
267
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
572.81
70
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
572.81
135
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
890.98
189
-
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
522.32
151
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
75.75
143
-
Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit.
110
2214
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board
25
1513
-
Door and window work with finishing
-
-
-
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
27
800
-
Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer- in-charge.
9.24
4628
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
12.6
3559
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
0.25
109862
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
72
210
-
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
244.8
215
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm
20
439
-
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
10
949
-
Providing and fixing chromium plated brass handles with necessary screws etc. complete:125 mm
20
266
-
Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including top & bottom fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge
8.75
6583
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)
6.51
6587
-
Providing and sticking Frosted Crystal Glass Film on glass panes in partition , doors etc.
16
551
-
Providing and fixing SS H handle having min 45 cm length in toughed glass door including all necessary screws etc. complete.
3
2903
-
Providing and fixing of glass door SS Patch Lock with out handle in toughened glass door including all necessary screws etc. complete
3
1267
-
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm).
22.98
11378
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
22.98
1176
-
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600Upto 5 mm depth and 5 mm width
20
147
-
Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. ( Shutter area to be measured)
15.54
148
-
Providing and fixing stainless steel catcher of approved quality in doors, including fixing with necessary screws etc. Complete
7
348
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
7
1002
-
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper
7
73
-
Supply , Installation, Testing and Commissioning of Vault door of the following specifications:
1. The Vault (Strong Room) Door (Main Door) dimensions and specification shall be strictly adhering to IS 11188 (Part-1): 2014
2. The Door shall have BIS Label of Class B having Torch & Tool Resisting capacity for minimum 30 minutes and Fire Resisting Capacity for minimum 30 minutes.
3. The bidder/OEM must possess Valid BIS License to manufacture and supply the aforementioned TRTL Door (Class B)
4. All the surfaces of the Door before painting shall be thoroughly degreased and cleaned of rust and scales preferably by 12 tank pickling process and treated chemically to prevent from rusting.
5. The Door shall be painted inside and outside with an anti-corrosive primer followed by two undercoats of paints and finally painted with quick drying paint, resulting into minimum 300 hrs of salt spray resistance. (Attach certificate/declaration)
6. The main door (Class B) shall consist of outer and inner mild steel plates conforming to IS 2062:1992 for plates up to 20 mm thick strongly rimmed and continuously welded to form a single structure and tightly enclosing a solid slab of high speed drill resisting and oxy acetylene torch resisting material that is at least 50 mm thick
7. Door Frame: The door frame and vestibule shall be welded to one piece construction with a minimum thickness of 10 mm and shall grip the concrete wall.
8. Rebate: The rebate of the door frame shall be formed by mild steel sections. The vertical rebates shall be riveted or welded with the side members of the door frame and shall conform to dimensions as specified by IS 11188.
9. Clenching mechanism: A continuous resilient packing shall be incorporated in the frame and a compression mechanism for clenching the door tight shall be provided so as to protect against admission of flood water or liquid explosives. In locked position the door after clenching shall not have any play in the direction in which the door opens.
10. Thickness of door over locks: Should be of minimum 90mm thickness.
11. The Door shall have an automatic relocking device for each Key lock fitted in the door which being always on guard shall come into operation if lock is dislodged by explosives or by other means.
12. Primary lock of the door shall have additional relocking device which being always on guard shall come into operation if lock is dislodged by explosive or any other means.
13. The lock shall be dual control type and have at least 8 active levers of brass of minimum 1.2 mm thickness. There should not be any dummy (false) levers.
-
-
-
14. The bidder/OEM must be the Original Equipment Manufacturer of the Locks used in the aforementioned Safe. (OEM must give a written undertaking on Letterhead and must also give an NOC to the bank for plant visit if needed)
15. Lock Case: Should be minimum 2 step case construction covering entire jamb area.
16. The lock shall be fixed with at least four bolts of 8 mm diameter such that any pressure applied on the bolts either directly or through handle of the door, is not transmitted to the fixing screw of the lock/locks. All working parts of the lock shall have corrosion resistant properties capable of withstanding exposure for 72 h in standard salt spray test with 5 percent salt solution.
17. Bolt Work: There shall be 6 locking bolts each on the vertical edges of the door(Front edge & Rear edge).
18. Hinges: Strap hinges to be suitably bolted to the door shutter. The hinge and pivot should be such that there is no appreciable friction or play for the movement of the door. The pivots shall have arrangements for lubrication and a height adjustment bolt is to be provided to adjust height of door shutter
19. Grill Gate (Inside) : Ventilating Grill Gate shall be made of mild steel angles, plates or channels with mild steel rods welded in a rigid frame. The grill gate shall be hinged in strong room door frame such that it opens inside. An unpickable dual control locking device capable of being operated from both the sides of the door shall be fitted in the grill gate.
20. Emergency Door: The general specifications of Emergency Door shall remain as for the main door except for Bolt Work. For Bolt Work, there shall be 3 locking bolts each on the vertical edges of the emergency door (Front edge & Rear edge).
21. LIMIT SWITCH/LIGHTING CONTROL: Vault lighting control shall be fitted on the Main Door to automatically control the electric supply to the vault.
1
638825
-
Plumbing works
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
4
6192
-
Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
5
1280
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern
1
17242
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap
5
2584
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board510x1040 mm bowl depth 250 mm
1
6069
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. Semi rigid pipe32 mm dia
5
103
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia
2
119
-
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
5
186
-
Providing and fixing CP towel rod complete fixed with CP brass screws of approved quality of minimum 600mm length approved as per the requirement of Engineer in charge.
5
1443
-
Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length15 mm nominal bore
12
97
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
6
650
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
13
626
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work,including cutting chased and making good the wall etc. 20 mm pipe 12 Kgf/cm2
100
409
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 12 kgf/cm2
85
440
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2
80
446
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 10 kgf/cm2
60
484
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall
60
327
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
80
622
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
30
722
-
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 25 mm dia 12Kfg/cm2
45
233
-
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2
45
238
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall
70
425
-
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall
75
281
-
Providing and fixing PVC pipes including all fittings like bent, tee, elbow, collar etc complete for jointing of pipes with one step PVC solvent cement, trenching, refilling ; testing of Joints complete as per direction of engineer in charge.75 mm dia. 6Kgf/cm2
65
281
-
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
110
331
-
Providing and fixing PVC pipes including all fittings like bent, tee,elbow,collar etc complete for jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
120
544
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
1
684
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
1
1023
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore
1
454
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) with C.P. brass Mirror holder with washers complete.
4
1408
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design: Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
12836
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:100 mm diameter
1
178
-
Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore
7
713
-
Providing and fixing disabled friendly bathroom kit with all accessories including Cistern with soft close seat cover and twin flush setting wash basin of min dimensions 510mm x 400mm, Spatula Lever basin mixer, Wall mounted 600mm long, Wall mounted grab bar 600 mm long and wall mounted hinged rail 750 x 750 Recommended Makes : CERA , Hindware, Jaguar or equivalent .
1
55752
-
Providing and fixing SS grating of approved quality and colour. Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating
6
187
-
Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages.
6
303
-
Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 4. 35 to 50 flush capacity
2
41145
-
Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
1
3069
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
10
-
Tile Work
-
-
-
Providing and laying Anti Skid matt vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm.
14.28
1766
-
Providing and laying premium vitrified bathroom wall tile in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement; matching pigments etc. complete. Size of Tile 600 x 600 mm.
110.88
1545
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
235.72
1766
-
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
16.97
1819
-
Providing and fixing 18 mm thick gang saw cut, mat /rough finished granite machine cut for steps, ramps or inclined plate form with raking and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.;Area of slab over 0.50 sqm
8.36
4180
-
Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-charge.Area less than 0.50 sqm.
12.24
4385
-
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
15
2276
-
Structural steel and water proofing
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
14.28
548
-
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)
250
615
-
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm
40.35
570
-
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.
21.31
439
-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
230.96
677
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts,locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer .
4.62
10205
-
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
135
154
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
689
168
-
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
25
500
-
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design.With 20x20 mm square bar
8
496
-
Providing & fixing Poly carbonate multi wall plain sheet 6 mm thick both side UV coated as approved by the Engineer in charge and should be supplied in a single length of 12m or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/self tapping screw of size (5.5x55mm) with accessories such as aluminium skylighting profiles, top and bottom sealant, screws complete upto any pitch in horizontal/vertical curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required.
17.64
1375
-
Paver block
-
-
-
Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30
85.05
2963
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
566.97
1121
-
Furniture
-
-
-
L TYPE WORKSTATION WITH MODULAR PEDESTAL STORAGE UNIT (1350+900)+*(600+450)*750 mm :
TABLE TOP Made of minimum 18mm BWR ISI (303 Grade) plywood (Century, Greenply, Fineply or equivalent). On top and all sides with 1mm thick hot press (3M or Henkel) laminates (Brand MERINO, Associates or equivalent) of approved colour and pattern as per the design. Table top shall be provided with 2mm thick edge band Underside: MS Unique Leg Trapezoidal cross section of size 60mm x 50mm x 20mm is made of 1.6mm thick CRCA Powder Coated. Horizontal Beams Below Table Top will be with 50mm x 25mm Rectangular Tube made of 1.6mm thick CRCA Powder coated. Flip Cover and Cable Management Tray Considered, includes three drawer modular pedestal unit ( min width 450mm,depth 500 mm, height 650) with channel handles ,hinges, lock all complete as per approved design of engineer in charge/Architect
1
31244
-
Work station table with toughened glass partition: - Table of size 1200x600mm Made of minimum 18mm BWR ISI (303 Grade) plywood (Century, Greenply, Fineply or equivalent). On top and all sides with 1mm thick hot press (3M or Henkel) laminates (Brand MERINO, Associates or equivalent) of approved colour and pattern as per the design. The table is provided with 1 drawer, 1 Storage, 1 key board pullout with necessary hardware like sliding channel cable manager, multipurpose locks, handles, mini fix, dowels and screws. Exposed edges to be finished with 0.8 mm edge band as per specified colour. 10mm thick toughened glass is to be provided on the table top at
both sides and front at a height of 40 cm with an opening for cash transactions and smoothed edge.
14
10058
-
Elegant Stylish multi-purpose foldable Table. Dimensions: 100 cm X 60 cm with foldable steel legs. Table Top made of minimum 18mm BWR ISI (303 Grade) plywood (Century, Green ply, Fine ply or equivalent). On top and all sides with 1mm thick hot press (3M or Henkel) laminates (Brand MERINO, Associates or equivalent) of approved colour and pattern as per the design. with necessary premium foldable brackets, Screws and other all accessories as required . UNDERSTRUCTURE: MS Unique Leg Trapezoidal cross section of size 60mm x 50mm x 20mm is made of 1.6mm thick CRCA Powder Coated. Horizontal Beams Below Table Top will be with 50mm x 25mm Rectangular Tube made of 1.6mm thick CRCA Powder coated.
1
2903
-
Multi-purpose foldable Table. Dimensions: 2500 cm X 60 cm with stainless steel heavy duty foldable brackets. Table Top made of minimum 18mm BWR ISI (303 Grade) plywood (Century, Green ply, Fine ply or equivalent). On top and all sides with 1mm thick hot press (3M or Henkel) laminates (Brand MERINO, Associates or equivalent) of approved colour and pattern as per the design. With Screws and other all accessories as required .
1
8420
-
Cash Counter table: - Table of size Min 1800x600mm Made of minimum 18mm BWR ISI (303 Grade) plywood (Century, Greenply, Fineply or equivalent). On top and all sides with 1mm thick hot press (3M or Henkel) laminates (Brand MERINO, Associates or equivalent) of approved colour and pattern as per the design. The table is provided with 1 drawer, 1 Storage, 1 key board pull-out with cash till with necessary hardware like sliding channel cable manager, multipurpose locks, handles, mini fix, dowels and screws. Exposed edges to be finished with 0.8 mm edge band as per specified colour.
1
12894
-
Cabinet/Wardrobe: Providing and fixing Cabinet/Wardrobe unit with 18 mm thick pre-laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked with one side decorative and other side balancing lamination. cupboard shutters edge to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with fixing chromium plated brass 50 mm cupboard or wardrobe knobs, special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Depth of shelves to be 300-600mm and shelves to be fix with proper support and bracket holders. as per layout drawing approved by Engineer in charge. Make laminate/: Greenlam - 283 Sky blue / Merino / Century. Only front elevation will be measured.
11.04
9701
-
Overhead Storage: - Providing and fixing overhead storage unit with minimum 18 mm thick pre-laminated medium density fiber board exterior grade (Grade-I) IS: 14587:1998 marked with one side decorative and other side balancing lamination. cupboard shutters edge to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with fixing chromium plated brass 50 mm cupboard or wardrobe knobs, special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Only Front Elevation will be measured.
2.7
5138
-
Revolving Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK
14
7549
-
Executive Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK
1
9292
-
Office Chair: Non-revolving executive chair with fixed armrest providing natural resting for arms. Seat with PU cutted foam backed fabric, back rest with mesh type fabric, Upholstery: Heavy duty rubber backed fabric in BLACK ( Size -55x60 cm)
4
5226
-
Partition wall Made of twin layer 12 mm BWR ISI (303 Grade) plywood (Century, Greenply, Fineply or equivalent). Exposed area 1mm laminate and inside 0.8 mm laminate with Hot press (3m or Henkel) Laminate (Brand MERINO, Associate or equivalent) of approved colour and pattern with inside frame work and fixing arrangement as per the design. Partition top and side shall be provided with minimum 80mm width border using 16 mm BWR grade plywood both side of white laminated plywood (top side high glossy finish) with 1.3 mm thick glossy edge band. The frame work should be 16 mm BWR grade plywood. All joints are necessary grooves in laminate to be given the partition is firmly fixed to the floor and wall. Area of unit to be measured in elevation. Note: Only front elevation will be measured.
98.43
4907
-
Supply and erection of Airport type 3 seater waiting chair with powder coated chromium finish having minimum dimensions 1675mm length X 710mm width X 775mm total height and 400mm seat height . Seat: High quality cold rolled 1.2mm thick steel perforated sheet pressed and welded to form the shape. Arm & Leg: High quality 1.2mm thick MS Tube / Sheet . Cross bar: High quality cold rolled 2mm thick steel sheet pressed and welded to form the shape.
5
7381
-
SUPPLY OF Wooden cot with one side table: Wooden cot frame & platform and side table made up with good quality hard wood(Mahogany/Second class teak wood) with duel comfort washable and durable mattress and pillow. Minimum standard dimensions of cot width 900mm, length 2100 mm and standard minimum height with mattress of 450 mm, the thickness of mattress should not be less than 150 mm. Height of head rest should be 750 mm and foot rest should be 450 mm and side table 450x450x450mm with lockable drawer and storage unit, handles, drawer channels, locks etc. and including polishing & varnishing,Pillow,bed sheet all complete as per designs and direction of Engineer in charge
1
23230
-
Cash Safe (Coffer) Volume. 14 L Min Wall Thickness: 2.5 mm min for body and 5 mm min for door Recommended Make: Godrej make, Model No. Premium Coffer BRN (ltem Code: SEBP 1112) or equivalent (only manual lockinq system)
1
13938
-
Cash Till- Steel body with metallic front panel. The cash drawer is sleek, stylish and sturdy in design and easy to use. Highly durable and reliable in operation which makes this cash drawer a favourite with most retailers. Cash drawer with a steel constructed casing,5 Bills and 3 to 6 Coin Trays, Removable 3/4/5/6-coin and Durability up to one million operations.
1
4646
-
Supply and installation of Key holder cabin made of medium density fiber board of 12 mm thickness of approved shade and design with provision to hold a minimum of 20 keys of approved shade as per the instruction of the engineer in charge.
1
4646
-
Supply of cafeteria plastic Armless chair with High-quality virgin plastic build for lasting durability, smooth matte finish, minimum 110kg load capacity and metal legs with Stainless steel.
5
1742
-
Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).
70.83
611
-
Signage
-
-
-
Providing and fixing inaugural stone made of 12 mm thick granite of minimum size 700mm x 900mm with engraved letters in gold/silver to be fixed on wall or with all fixing arrangements as per the instructions of the engineer in charge.
2
22248
-
Lettering with black Japan pint of approved brand and manufacture
5000
5
-
Providing and fixing in position the signage board made out of 3 mm opaque PVC foam board of computerised cut, PVC non reflective self adhesive vinyl painted foam board of required size and colour.
7.2
1742
-
Electrical works- Wiring
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
75
1176
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
4
1256
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
300
173
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
390
198
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
40
238
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
18
476
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
14
588
-
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
80
77
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
4
660
-
Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).
23
692
-
Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. lCD
2
760
-
Supplying and fixing PVC batten/ angle holder including connection etc. as required.
4
107
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
75
107
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
50
109
-
Electrical works- Fixtures
-
-
-
Supply and Installation of surface mounted LED Tubelight. The luminaire should have CRI 80 and CCT of both 6500K/5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 2000 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 20 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 25k burning hours. The electronic driver used shall have a power factor 0.95 and THD. Make: Philips, Crompton, Wipro, Havells
16
1042
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, ashers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: Atomberg/Havells/ Orient Electric/ Crompton or equivalent
10
3222
-
Supplying, conveyance and Installation of 3 blade, 250 mm sweep, minimum 1200 rpm Exhaust Fan including frames and all mounting accessories complete.
Recommended Make: USHA/ Havells/ Bajaj or equivalent
6
2620
-
Supplying, conveyance and Installation of 3 blade, 400 mm sweep, 1400 rpm Wall Mount Fan including frames and all mounting accessories complete. Recommended Make: USHA/ Havells/ Bajaj / Almonard or equivalent
8
2504
-
Supply and Installation of surface/recess mounted LED 2x2 luminaire with CRCA housing suitable with fully diffused diffuser for general lighting. The luminaire should have CRI 80 and CCT of both 6500K/5700K, Cool White Light. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3700 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 36 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor 0.95 and THD. Make-Philips, Crompton, Wipro or equivalent
24
3615
-
Supply and Installation of surface/recess mounted LED Round/Square luminaire with CRCA housing suitable with fully diffused diffuser for general lighting in office areas. The luminaire should have CRI 80 and CCT of both 6500K/5700K, Cool White Light. The luminaire shall be compliant with IP20 and IK02 classification.
Luminaire shall be designed to emit at least 1000 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 10 -15 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor 0.95 and THD. For light fittings to be installed in false ceiling, all required cuttings shall be made and damages shall be made good as per the direction of Engineer in charge. Make-Philips, Crompton, Wipro
13
1575
-
Supply, conveyance and Installation of compact 10-15W LED Bulkhead Light giving soft glare free, Cool White light & complete with electronic driver including all required mounting accessories, frames, complete ( Make: Philips/WIPRO/Havells or equivalent)
6
1582
-
Switchgear and DB
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
4
2440
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
50
237
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural
2
647
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
3
982
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral
1
1298
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
16
9
-
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
4
1008
-
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
1
7246
-
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2
402
-
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps
1
1244
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2
2490
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes int he existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
1
3301
-
Supplying and fixing 40 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and netural
4
1354
-
Supplying and fixing 40 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole
2
2051
-
Cabling
-
-
-
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core 50 sq mm
25
656
-
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp
30
449
-
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp
30
276
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 10 sq. mm + 1 X 6 sq. mm earth wire
80
389
-
Cable Termination
-
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
6
391
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductorcable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
4
296
-
Earthing
-
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
8
7390
-
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)
90
98
-
Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)
24
27
-
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re- filling etc. as required.
75
1454
-
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
120
63
-
Network and LAN cabling
-
-
-
Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
800
58
-
Supply, Installation and Integration of Dual Band WiFi Access Point on false ceiling along with accessories, having Fast Wireless Speed, simultaneous 2.4GHz 300Mbps and 5GHz, 867Mbps Dual Band connections for 1.2Gbps of total available bandwidth, Superior Coverage of Four Fixed External antennas provide stable wireless connections and optimal coverage, App Control, Interface of 1×10/100 Mbps WAN Port and 4× 10/100 Mbps LAN Ports having Working Modes (Router Mode / Access Point Mode). Make: TP-Link/Netgear/DLink or equivalent
2
6670
-
Supply, Installation and integration of Ethernet Switch for Office Network use having 24 Gigabit ports, Uplink ports: 2 x 1G SFP port, Supports desktop or rackmount placement, and includes all the necessary mounting hardware. Make: Netgear/D- Link/TP-Link
1
42377
-
Supply and fixing of 6U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete
1
5514
-
Supplying and fixing RJ45 Outlet including cover plate, Keystone Jack and Gang box supporting, connection etc. as required
20
661
-
Surveillance System
-
-
-
Reinstallation of shifted 2U/4U/6U Rack including accessories complete
3
1725
-
Reinstallation, Testing and Commissioning of shifted Network Video Recorder/Digital Video Recorder including accessories complete
1
8625
-
Reinstallation, Testing and commissioning of shifted surveillance cameras to the new surveillance system
5
258
-
Dismantling of existing 2U/4U/6U racks including accessories complete
3
69
-
Shifting of dismantled surveillance cameras, Network switches, NVR/DVR, racks etc upto 20 km
1
4025
-
Dismantling of existing Network Video Recorder/Digital Video Recorder including accessories
1
345
-
Dismantling of existing Network Switch including accessories
3
345
-
Dismantling of existing Surveillance cameras including accessories
5
34
-
Reinstallation of shifted Network Switches complete
3
431
-
Supply, Conveyance and Installing of 2MP IP Dome/Bullet Camera having 1/3& Progressive Scan True Day and Night Colour IR Camera having effective pixel of 2 MP, Video frame rate of 2MP @30FPS, Minimum illumination of 0.01 lux@F1.2, 0 lux@IR On, 20 M IR Range, 24 IR LED, AWB, AGC, BLC, 2D Noise reduction, with 3.6mm board lense, 12 VDC, PoE IP67 rated weatherproof performance. 1 year warranty. Make: Bosch/CP Plus/Honeywell or equivalent
3
3192
-
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
50
39
-
Supply and Installation of LED Color Monitor of minimum 32 inch screen, complete, UHD display Make: LG/Samsung/Panasonic or equivalent.
1
18842
-
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x
1.5 sq. mm
200
34
-
Supply, Installation, Testing and Commissioning of 16 channel embedded Linux NVR (Network Video Recorder), must connect 16 channel IP cameras, Should support min 2 SATA HDD and each should support Min 2TB and must record video simultaneously, (Recording Type: Continuous, Motion Detection, Alarm, Smart Event, Event Motion Detection, Alarm, Smart Event), Video Compression H.265(HEVC)/H.264+/H.264, 2 Year Warranty, Image quality should be maintained throughout the warranty period. Make: CP Plus/Hikivision/Dahua or equivalent
1
10436
-
Supply, Installation, Testing and Commissioning of 16 Port PoE Switch 1000BASE- T Copper Ethernet PoE+ connections, 10M/100M/1G RJ-45 copper ports, 1000BASE-X Fiber SFP ports, 16 port Auto sensing 10/100/1000 Mbps PoE, minimum CPU memory 512 MB with 2 SFP/combo ports, Energy Efficient Ethernet (IEEE 802.3az) Make: CP Plus/ Netgear or equivalent
1
7400
-
Supply and Installation of 2 TB Hard Disk Make: WD/Seagate or equivalent
2
6388
-
Supply and Installation of Wireless Mouse. Make: hp/Dell or equivalent
1
696
-
Supply and fixing of 4U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete
1
4964
-
DG set
-
-
-
Supply, Installation, Testing and Commissioning of Silent Type Diesel Generating set along with CPCB IV+ approved acoustic enclosure comprising of Radiator Cooled Diesel engine 1500 RPM with, complete with standard accessories. Coupled to Alternator with rated at 16KW/20 KVA at 415 Volts mounted on Channel Iron Base Frame complete with Standard Manual Control System, Fuel Tank and Batteries, AMF Panel With 2 contactors and integration with ACCL unit, conducting trial run as per Inspectorate/CPWD norms including required fuel/oil etc, obtaining necessary approvals from CPCB/CEA/Local bodies and other licensing authorities wherever required complete, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor and consisting of the followings: DG capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. (i) Start-stop switch with key (ii) Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication (vi) RPM indication (vii) Over speed indication (viii) Low lube. Oil tripindication (ix) Engine Hours indication. Synchronous alternator rated at 20 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class- F/H insulation. Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer with SITC of MS class ‘C exhaust pipes of suitable dia in suitable support upto 15m height. Dry exhaust main fold exhaust silencer and catalytic convertor.12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries as required, Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere. The DG set shall be including design, supply, installation, testing and commissioning of AMF (Auto Mains Failure Panel) consisting of necessary breakers, switchgear, protection devices, interlocking complete as per the inspectorate approved standards. Make: Cummins/Kirloskar/Greaves or equivalent
1
460747
-
Supply, Installation, Testing and Commissioning of Digital Three Phase Automatic Changeover with Current Limiter (ACCL) TPN_TPN, 63A Mains/63A Genset suitable for 4 pole, 3P + N, 415V, Class 1 Accuracy, with programmable settings for Overvoltage, undervoltage, warning cycles, DG On time, DG output supply, single phasing protection, fault tripping and automatic interchanging/switchover between EB and DG, LED Display with run parameters displayed on screen including suitable enclosure complete. Make: LT/Hager/Havells/ABB/Schneider/Siemens
1
47552
-
UPS
-
-
-
Dismantling, Shifting, installation and commissioning of existing 5 kVA UPS including accessories, battery, battery rack complete from old Treasury building at Chalakudy, Thrissur to new treasury building at Chalakudy, Thrissur
1
8625
-
Supply, Installation, Testing and Commissioning of True on-line Double Conversion 5 KVA UPS system with 1:1 Crest Factor Single Phase Phase Input & Single Phase Output. Inversion shall be Microprocessor controlled with instantaneous sine wave Control using IGBT. UPS shall have standard display features, alarms, safeties, etc Input Voltage range : a) Phase & Single Phase with ground b)Votage range 190 VAC & 250 VAC c)Input Frequency : 50/60 Hz d)Power Factor : 0.95 or above e)THD : less than 5% with full load Bypass f) Voltage Range & 200VAC & 240 VAC g) Frequency range & 45-55 Hz/55-65 Hz Output Voltage Range h)Voltage Range & 200VAC & 240 VAC i)Frequency range & 50/60 Hz j)Voltage distortion & linear load <= 2% k)Voltage distortion & nonlinear load <= 5% l)Output waveform& pure sinewave m) Minimum Back up time : Continuous 60 Minutes at full load Rectifier shall be Full wave Type (Shall fully meet the specified input power requirements) Battery Type: Sealed Lead Acid Maintenance Free DC Voltage : 24/48/96V DC System, Battery Nos and capacity shall be designed for optimum storage space. Make: Liebert Vertiv/APC by Schneider/Numeric by Legrand
2
162029
-
Electrical Panel
-
-
-
Fabrication, Supply, Installation, testing and commissioning of dust and vermin proof sheet steel constructed using 16 SWG CR sheet and powder coated Double Door Cubicle type Wall Mounted Outdoor KSEB Metering Panel, consisting of the following:- Incoming :- 1) 100 A 16-25kA 4 pole MCCB with thermal magnetic release, Spreader Terminals - 1 Set , 2) LT Type 3 Phase Meter, Glass Type enclosure for meter reading, complete as per the norms of Electrical Inspectorate.
1
31202
-
Lightning Protection System
-
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
4
532
-
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
10
110
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
240
123
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
120
194
-
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
8
121
-
Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.
120
208
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
3
7390
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
18
155
-
Fire Safety System
-
-
-
Supply and fixing in position Exit Signages photo luminescent type with indication arrows and letters Exit/Fire Exit/ Exit/ Fire Fighting Equipment/ Fire Extinguisher/ Floor/ No Smoking / danger/ Call point / Sounder Identification Numbers (Ground/ 1st/2nd)/ in case of the fire do not use life, use stairs etc having dimension 30 cm x 15 cm dimension complete.
10
406
-
Supply & installation of CO2 Type fire extinguisher of 2 Kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent
6
2728
-
Supply, Installation, Testing and Commissioning of MS &C& class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles in walls or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinchromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark. 100MM Dia
16
2872
-
Supply, Installation of Addressable Multi Sensor Detector ,Analogue Addressable Flash scan multi sensing, low-profile detector having Rotary, decimal addressing system with standard base and junction box. The detector shall be with Visible bi- color LEDs for 360 deg viewing and shall blink green every time the detector is addressed, and illuminate steady red on alarm. Detectors for below false ceilingcomplete with MS Powder coated Junction Box (if required) for mounting Above False Ceiling with Cable lugs at Ends, cable compression glands, cable tags and Ferrulings.
25
3570
-
Supply, Installation of Analogue Addressable thermal detector having Rotary, decimal addressing system with standard base and suitable base box. The detector shall be with Visible bi-color LEDs form 360 deg viewing and shall blink green every time the detector is addressed, and illuminate steady red on alarm.(Heat Detector)
2
3338
-
Supply,Installation of Addressable Horn / Strobe rated at 82 dBA @3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication.(Make - Siemens,Honeywell,Ravells or equivalent)
4
5313
-
Supply,Installation of Addressable Break Glass Manual Call Point having Rotary, decimal addressing system and having an integrally mounted addressable module that monitors and reports contact
status.
2
6097
-
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
400
139
-
Fire brigade Inlet - Supply, Installation, Testing and Commissioning of Fire brigade Inlet connection fabricated from 100 mm dia MS Class B medium grade pipe comprising of Two Way 63 mm dia gun metal male threaded non return valve.
1
7659
-
Hose Box - Supply, Installation, Testing and Commissioning of Hose Box -Single door - (cabinet) to accommodate one piece of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pie. The cabinet is made of MS/ Fibre sheet with glass fronted hinged doors and lock.
2
4234
-
Branch Pipe - Supply, Installation, Testing and Commissioning of Branch Pipe- S.S 63 mm dia short size branch pipe with 20 mm dia bore nozzle , as per IS:903 with - ISI Marked.
2
3019
-
Hose Reel - Supply, Installation, Testing and Commissioning of Hose reel drum made of Miled Steel, Hose Reel Drum - as per IS:884 with 30 mtr length rubber hose of working pressure 7 kg/cm2 and S S shut off nozzle rang of jet flow 24 ltr/min, range of jet throw 6 mtrs with ISI mark.
2
8473
-
Fire Hose - Supply, Installation, Testing and Commissioning of Fire Hose - 63 mm ( 2 1/2&) dia RRL , 15 mtrs length bearing IS;636 type A with ISI Marked duly bounded with S.S (Stainless Steel) couplings, 63 mm size, pair of male & female parts, instantaneous type , heavy duty bearing IS:903 with ISI mark.
2
6211
-
Hydrant Valve - Supply, Installation, Testing and Commissioning of Hydrant Valve- Single Headed, S.S -as per IS: 5290 , ISI Marked oblique pattern Hydrant Landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with pvc blank cap & chain.
1
9286
-
Supply, installation, testing and commissioning of Electrically driven Terrace pump raced 450 LPM at 24 M head high efficiency volute type with cast iron casting, impeller, pump coupled to a squirrel cage induction motor, totally enclosed fan cooled with supply condition 415V, 3 phases, 50Hz, foot mounted type rated for 5 hp at 2900 rpm including all mounting accessories, foundation and vibration pad complete as required by Fire Department. Make: Kirloskar/Grundfos/Mather and Platt/WEG or equivalent
1
64446
-
Pressure Switch -Supply, Installation, Testing and Commissioning of pressure switch having 1/4& BSP (F) connection IP:32 enclosure protection, pressure rage 0 to 200 psi with necessary contact. Make: Indfoss/Danfoss
1
2610
-
Ball Valve - Supply, Installation, Testing and Commissioning of Ball Valve brass iron body as per IS 5312 with ISI mark 25 mm dia Make : Audco/Zoloto/L&T
2
1449
-
Under Ground Piping - Supply, Installation, Testing and Commissioning of under ground piping M S pipe Class 'C ' medium grade ISI mark complete wtihall necessary fittings such as nuts & bolts, bends, flanges, tees etc . and piping shall have anti corrossive wrapping and coating treatment. The rate quoted shall be inclusive of excavation, trenching and relaying of soil as required. 100 mm dia Make: Jindal/Tata Steel
3
2784
-
Supply, Installation, Testing and Commissioning of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1.6, teflon or nylong bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 100 mm dia Make : Audco/Zoloto/Khartar
1
7475
-
Supply, Installation, testing and Commissioning of Automatic Fire Pump Panel consisting of necessary starters, contactors, switchgears etc suitable for 450 LPM Terrace Pump with require facility to connect the Pressure Gauge, Pressure switch. etc to maintain required the line pressure.
1
75382
-
Pressure Guage -Supply, Installation, Testing and Commissioning of pressure guage, 4 & dial, 0 - 200 psi range 3/8& BSP weather proof with stainless steel internals, siphon tube including fittings etc. Make: H Guru/Pointer
1
2900
-
Supply, Installation, Integration and Commissioning of analog addressable Single Loop Fire Alarm Control Panel having capacity upto 4 loop cards, onboard USB Protocol, RS-485 Connectivity, touch pad, each loop shall support minimum 250 devices, connectivity via modbus, ethernet, construction 16 guage CRCA sheet with powder coated finish, IP 50 Indoor, including 1 no analogue addressable loop card complete. Make: Ravel/Agni/ASES or equivalent
1
77761
-
Supply, Installation, Testing and Commissioning of Monoblock Centrifugal Pump working in single phase, 1 hp including starter box, switchgear, foundation and accessories complete. Make: Grundfos/Crompton/Kirloskar
1
17609
-
Cable Tray
-
-
-
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.100 mm width X 50 mm depth X 1.6 mm thickness
15
565
-
Air Conditioning Works
-
-
-
Supplying additional copper piping of required size and connecting the same to the available piping and extension of the same through 100mm PVC duct inside false ceiling.
6
1370
-
Supply, installation, testing and commissioning of Split Air Conditioner of following capacity and specifications: Consisting of high wall-mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of energy-efficient suitable rotary compressor for operation on single- phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation and fixing of room (fan coil) unit on wall, standard 3 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of 1& dia drain PVC pipe with insulation up to 3 m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigerant gas, suitable stabilizer etc complete as required. (Make: Voltas, Blue Star, LG, Hitachi, Carrier or equivalent). 1.0 TR 3 Star rated (inverter type AC) as per BEE
1
38567
-
Queue Management System
-
-
-
Supply, Installation, testing and commissioning of 43 inch Android 4k LED TV including accessories. Make: Sony/Samsung/LG
1
51968
-
Supply, Installation (fixing on counters as required) and Integration of 4 - Digit Single line Display with inbuilt PA system suitable for Wireless Queue Management System having a. 4 Digits of 7 Segment bright b. LED Display c. Display shows Token numbers with ding dong bells complete
11
3076
-
Supply and installation of Calling Unit suitable for Wireless Queue Management System consisting of a. 12 Digit Numeric Keypad b. Next & Recall keys c. LCD Display (Display shows waiting number & 4 digit token running number) having enclosure-Sheet Metal/Vinyl including accessories complete.
11
3657
-
Supply and Installation of Token Dispenser Unit having a. Auto Cutter, b. Integrated Thermal Printer c. 5 Switches minimum for selection of service d. 50 Meter Thermal Paper Roll Capacity e. Micro Controller with 1GB RAM f. Storage-16 GB g. Server Client QMS Application h. Integrated display i. Dual Core Processer j. Token Number-4 Digit, with 50 rolls of 2 inch paper (58mm) as bundle complete
1
13639
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%