HLL Lifecare Limited Tender

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door

Supplying and fixing 40A / 63A, TP MCB, 415 Volts, "C" curve, miniature circuit breaker in the existing MCB DB complete with connections, testing and commissioning etc as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current breaker with overload (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required up to 40A, 2P, 30mA

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supply installation, testing and commissioning of following single phase to single phase UPS with inbuilt battery backup, indoor (IP20) in stand alone configuration, true online double conversion DSP based UPS system, with 30 min backup battery with, input pf.9, less input current consumption, with input 230V single phase, output 230V single phase , IGBT rectifier and IGBT inverter. It shall be 100% generator compatabile with efficiency 90% and output power factor 0.8 and including all accessories etc as required. The UPS system shall be with manual maintenance bypass switch facility. The system shall comply to IEC /EN 62040-1 and relevant IS standard and.The acoustic noise of the system should be less than 58dB. The system shall comply to IEC /EN 62040-1, EN/IEC 62040-2, EN/IEC 62040-3 and relevant IS standard. 3kVA UPS - 1 Nos, Battery Circuit Breaker-1 nos, Battery Required nos. of SMF for providing 30Minutes Backup and Battery Accessories like battery rack, interconnecting cables etc.

SITC of 18 W (+/-2) high efficient recess mounted LED circular/square down lighter with white powder coated, pressure die cast aluminum housing, a polycarbonate diffuser and a sleek design of product height not more than 40mm. The luminaire shall have a CCT of 6500 K, CRI80, power factor0.9 and THD 10 %. The luminaire shall be EMI/ EMC compliant. The luminaire and driver shall be BIS approved and test certificates of LM79 and LM80 reports shall be submitted. The luminaire shall have a non-integral LED driver with 50,000 burning hours as per L70B50 criteria, ambient temp-0 to 45 o C, 2.5 kV surge protection, and inbuilt electronic driver, luminaire efficacy 110 lm/W including all accessories necessary as required to complete installation.

Supply, installation, testing and commissioning of floor mount rack with glass door, lock and power board 27U.

Supply, installation, testing and commissioning of CAT6A Information Outlet, RJ45 with all accessoriesrequired at site to complete the work as per technical specification

Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

Supply, installation, testing and commissioning of all equipment's in the presence of Engineer in charge

Wiring with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. 2x1.5 sq.mm

Supplying and drawing following 4 core snake cable in the surface/ recessed steel/ PVC conduit as required.

Supply, installation, testing and commissioning of low noise cable with phono to phono 2M.

Supply, installation, testing and commissioning of low noise cable with phono to phono 20M.

Providing & Fixing mid back chair .The seat & back are made up of 12mm thick hotpressed plywood, upholstered with fabric & moulded with Polyurethane foam seat and back covers. The back foam should designed with contouredlumbar support for extra comfort .The seat has extra thick foam on front edge to give extra comfort.Mid back size 475 mm Width x 580 mm Height mm. And seat size 470 mm Width x 480 mm Thepolyurethane foam should bemoulded with density = 45 kg/m3 and hardness = 16 +/2 kg on hampdem machine at 25% compression .Armrest are injection moulded from black copolymer polypropylene. The mechanism should befixed 360 degree revolving type,Upright position locking, tilt tension adjustment, seat back tilting ratio 1:3. The pneumatic height adjustment has an adjustment stroke of 12 cm. The pedestal should be injection moulded in black 33 % glass filled in nylon 66 with 5 nos twin wheel castors. The pedestal should be 66.3 cm pitch-center diameter.

Supply, installation, testing and commissioning of Server PC Intel i7 processor, 12th generation, minimum 24 inch LED monitor, Gigabit LAN port, USB port 2 or 3, 8GB min DDR4 RAM, 512 GB NVMe SSD, 2GB geforce / amd radeon graphic card, HDMI ports, optical mouse, Keyboard, Laser pointer, wireless presenter for presentation, slide changer, USB power point remote control pen, PPT controller for Mac/computer/Laptop windows presentation clicker for keynote/Google slides, Genuine Windows 10 Pro or higher including all required cables, accessories etc

Supply, Installation, Testing and Commissioning of Central amplifier- Studiomaster Vak system professional conference system, 4 channels each channel supports 40 delegate units (Total 160 units) and upto 4 chairman units. Priority switch to override all delegate units on the Val C NOM (Number of Open microphones ) supports up to 8 active delegate units. Frequency range of 100Hz - 14.5KHz. Model Vak. 10S

Supply, installation, testing and commissioining of Audio interface: Studio quality ( 16bit/48Hz) digital recording two input (Mic/ Line instrument level) and output . extreme low latency digital streaming. switchable phantom supply. supports windows/android and mac IOS, USB 2.0 Bus powered . Model: AI-202.

SITC OF 250 Watts High Wattage with digital player 5 mic 2 aux . Ahuja Make: Model SSA-250DP

Electrical Labour works Dismantling of existing ceiling fan, light fittings, Switch Boards, DB Boards (SPN &TPN) using mechanical means or physical means without disturbing the overall structure of proposed area. All items dismantled and shall be made a checklist for returning back to concerned Authorities. All items shall be verified by Electrical Engineer (HLL) before handing over. If any working product is damaged during transit, the same shall be replaced without any additional claim.

Providing Computer Table with keyboard Facility of size 7'0" x 3'0" as per design on site in 19 mm thk. Marine plywood frame work with 1 mm thk laminate table top including 12 mm thk. glass on table top rested on 3" Dia.Steel stude.1 no. Shelf for CPU to be provided below thedesk as shown in the drg. All the inner surfaces shall be finshed with 1mm thick white laminate.1no. Computer key board tray as per architectsdesign using 19mm thk marine ply base and 25 x50mm round edged moulding on the front fixedwith telescopic/double(Approved make/approved sliders).