Guruvayur Devaswom Tender

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab over 0.50 sqm

Supplying Asbestos fibre cement corrugated sheet

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Polishing with touch wood using best quality one coat to old wood work after cleaning the surface neatly and smoothly including all materials and labour charges etc. complete.

Supplying Glass sheet (Pin headed) 4mm thick

Providing and fixing false ceiling with 7.5mm thick PVC plain panel board ceiling of approved qualityin with existing frame work with necessary screws etc complete

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) . Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately). Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Supplying 4 mm thick ACP

Supplying and paisting the high quality Vinyl printing on existing board showing details as per the directions of departmental officers.

Supplying PTMT grating 100 mm dia

Supplying Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete

Supplying and fixing CP Towel rod 45cm or nearest available length

Providing satin cloth curtain for front stage curtain per size 8.00x 3.60 m with nessery boarder fleats and side top cotton boarder cloth with hooks, ropes as per existing pattern etc complete.

Providing cotton cloth back curtain per size 8.00x 3.00 m with hooks ,ropes as per exising patterns etc complete.

Providing cotton cloth side curtain per size 2.00x 3.00 m with hooks ,ropes as per exising patterns etc complete.

Supplying and fixing coir mat S.K-1 of Red bleech of good quality,conveying to site, fixing to frame with steel wires,clamps,screws etc. including all materials and labour charges after removing the old coir mat.

Labour engaged for removing damaged AC sheet and laying new AC sheet, removing AC sheet from front portion and fitting on existing frame, repairing the existing toilet door, fixing the pin headed glass on ventilator at green room, fitting gratings and towel rod, cleaning surroundings etc complete. Carpenter 1st class

Labour engaged for removing damaged AC sheet and laying new AC sheet, removing AC sheet from front portion and fitting on existing frame, repairing the existing toilet door, fixing the pin headed glass on ventilator at green room, fitting gratings and towel rod, cleaning surroundings etc. complete. Carpenter 2nd class

Labour engaged for removing damaged AC sheet and laying new AC sheet, removing AC sheet from front portion and fitting on existing frame, repairing the existing toilet door, fixing the pin headed glass on ventilator at green room, fitting gratings and towel rod, cleaning surroundings etc . complete. Beldar

Labour engaged for removing damaged AC sheet and laying new AC sheet, removing AC sheet from front portion and fitting on existing frame, repairing the existing toilet door, fixing the pin headed glass on ventilator at green room, fitting gratings and towel rod, cleaning surroundings etc complete. Glazier

Labour engaged for removing damaged AC sheet and laying new AC sheet, removing AC sheet from front portion and fitting on existing frame, repairing the existing toilet door, fixing the pin headed glass on ventilator at green room, fitting gratings and towel rod, cleaning surroundings etc. complete. Fitter (grade 1)

Labour engaged for removing damaged AC sheet and laying new AC sheet, removing AC sheet from front portion and fitting on existing frame, repairing the existing toilet door, fixing the pin headed glass on ventilator at green room, fitting gratings and towel rod, cleaning surroundings etc. complete. Coolie