Government Homeopathic Medical College Tender

Supply of physiotherapy Equipments

Solid state shortwave diathermy – 500 w 1. The equipment should have 200w average mean output 2. It should use latest and advanced solid state power electronics not valve based technology 3. It should not use any valve for generating output 4. The equipment should have two modes. continues and pulsed modes, 5. Pulsed mode should have 9 different settings. 6. The equipment should have light weight flexible pads and cables 7. The equipment should have the facility to use pad electrode and disc electrode. 8. The equipment should have castor wheels for easy mobility 9. It should work on wide range of input voltage from 180 to 240volts 10. The equipment should work independently without the use for a voltage stabilizer 11. It should have colour full bar graph to display low ,medium and high power output 12. The total power consumption should be below 200w 13. It should have necessary safety certificate from competent agencies. 14. The equipment should not start operating if power selection knob is not at zero, and it should have audio and visual indication to indicate the same. 15. It should have flexible pads. 16. It should have three colour bar graph to indicate output power of low, medium & high.

ACUTENS THE EQUIPMENT SHOULD BE AN ADVANCED MICROPROCESSOR 4 CHANNEL TENS MACHINE WITH ACUPUNCTURE LIKE TENS CAPABILITIES. THE EQUIPENT SHOULD BE LIGHT WEIGHT EASY TO CARRY LESS THAN 2KG IT HAS AUTOMATIC INTENSITY CONTROL WHICH MAKES IT VERY SAFE OPERATE. THE EQUIPMENT SHOULD HAVE LCD DISPLAY WHICH DISPLAYS PARAMETERS LIKE TIME, INTENSITY OF ALL 4 CHANNEL SHOULD BE DIAPLAYED THERE. THE EQUIPMENT SHOULD NOT BE BASED ON PREPROGRAMS THE EQUIPMENT SHOULD HAVE TIMER TO SET TREATMENT TIME BASED ON KNOB SETTING IN STEPS OF 5,10,15,20 MINUTES MAXIMUM 20 MINUTES THE EQUIPMNET SHOULD HAVE FREQUENCY STARTINFG FROM 1HZ TO 200 HZ AND PULDE WIDTH FROM 75 TO 360 MICROSECOND THE EQUIPMENT SHOULD HAVE SYMMETRIC OUTPUT WAVEFORM THE EQUIPMENT OUTPUT CURRENT SHOULD BE AT 0 TO 60MA AND OUTPUT VOLTAGE AT 0 TO 100VOLT PEAK TO PEAK THE EQUIPMENT SHOULD HAVE INDEPENDENT INTENSITY CONTROL AND DISPLAY OF OUTPUT CURRENT FOR EACH CHANNEL. THE EQUIPMENT SHOULD HAVE 4 KNOBS FOR EACH CHANNEL AND SEPARATE KNOB FOR SETTING AMPLITUDE AND SINGLE KNOB FOR SETTING FREQUENCY AND TIME IT SHOULD HAVE 12 V /500MA EXTERNAL INPUT POWERSOURCE /ADAPTOR AND POWER CONSUMPTION SHOULD BE LESS THAN 10 WATTS . DIGITAL DISPLAY OF OUTPUT CURRENT OF EACH CHANNEL AND TREATMENT TIME. THE EQUIPMENT SHOULD ENSURE THAT THE MACHINE PRODUCES OUTPUT ONLY AFTER INTENSITY OF ALL 4 CHANNELS ARE AT ZERO. SMART CONTROL PREVENTS A PATIENT FROM ACCIDENTALLY RECEIVING A HIGH INTENSITY THAT WAS SET FOR THE PREVIOUS PATIENT. THE 4- CHANNEL TENS UNIT SHOULD PROVIDES A WIDER FREQUENCY BAND.THEREBY ADVANCED TENS TREATMENTS CAN BE PERFORMED THRU MANUAL MODE