Forest Industries Travancore Limited Tender

Providing, fabricating and fixing at site, Aluminum composite panels Cladding, Using AL strong, Alston, or equitant or thickness 4 mm, With skin thickness of 0.5 mm. The panels shall be cut to size of required grid dimensions in line with the site conditions. Without leaving any marks on the sheet. The panels shall be fixed on pre- fabricated framework. Using 50 mm x 25 mm x1 mm thick Aluminum sections. Joined horizontally and vertically using standard cleats and fasteners. The gap formed in between the panels shall be sealed with silicone sealants of Saint Gobian - Prim fix/Dow Corning. After sticking the required masking tapes. The rate inclusive of cost and conveyance of all materials to site, load, lift and labour charges for erection. Complete as directed by Architect/ Consulting Engineer.

Designing fabricating and fixing at site structural glazing frame work, using black colour powder coated aluminium sections. This conforms to wind load and static load calculations. Section number 8796 (75mmx57mm) for verticles and horizontals. Securely fixing the basic frame work to the masonry using 50 mmx50 mmx 6mm thick angles. Section number 1773 (25 mmx25 mm) for cleat angle. 67 mmx10mm long with adequate and properly designed anchor bolt, along with required galvanized nuts and bolts (100mmx10mm). The frame work will be finished with line and level. Glass to be placed horizontally and vertically with 6mmx6mm spacer form tape and applied with architectural grade silicone construction sealant (UV resistant) of Saint Gobian-Primafix / Dow corning with requisite structural bit applied along with the perimeter of each glass panel. Silicone sealant of make Dow corning 789, Sikasil WS 305, shall be applied between the glass panels to make it absolutely water tight. The rate inclusive of cost and conveyance of all materials to site, load, lift and labour charges for errection etc. Complete as directed by architect/consulting engineer. 5 mm Gray/bronze glass.

Designing fabricating and fixing at site ACP support MS frame work using rectangular tube 50 mm x25 mm x1.35 mm and fixing to wall /beam using angle bolt. The rate inclusive of cost and conveyance of all materials to site, lead, lift and labour charges for erection etc. Complete as directed by architect/ Consulting engineer .NB. Painting should be done by client.