Forest Industries Travancore Limited Tender

od140516/2023_2024 : Supplying and providing of Rack 9 U  Heavy 500D

od140517/2023_2024 : Supplying and providing of Accessories<br><br> RJ 45 Jack D Link –60 Nos<br> SMPS : 12V / 10A – 03 Nos (Make: CP Plus)<br> 6A Power Code - 03 Nos<br> PoE Connector – 26 Nos<br> Desktop Switch – 16 Port – 02 Nos<br> 4x4 PVC Box – 26 Nos<br> Spike – 01 Nos<br> Wireless Mouse Make: Dell – 01 Nos<br> HDMI Extender – 01 Nos

od140518/2023_2024 : Supplying , providing and installation of Hard Disk<br><br> 8TB SATA Surveillance HDDs<br> Make: WD Purple

od140519/2023_2024 : Supplying , providing and installation of 32 Channel NVR 4K NVR<br> Up to 32-ch IP camera inputs<br> H.265+/H.265/H.264+/H.264 video formats<br> Up to 2-ch @ 8MP or 4-ch @ 4MP or 8-ch @ 1080P<br>decoding capacity<br> 1 HDMI and 1 VGA interfaces: both interfaces support<br>independent video output<br> 2 HDDs for continuous video recording<br> Up to 256 Mbps incoming bandwidth

od140520/2023_2024 : Supplying , providing and installation of 4 MP Dome / Bullet Camera:-<br> High quality imaging with 4 MP resolution<br> Efficient H.265+ compression technology<br> Clear imaging even with strong back lighting due to 120 dB<br>WDR<br> Water and dust resistant (IP67)<br> EXIR 2.0: advanced infrared technology with long IR range

od140521/2023_2024 : Supplying , providing and installation of 2 MP Dome / Bullet Camera:-<br> High quality imaging with 2MP resolution. Video Max.<br>Resolution 1920 × 1080 @ 30fps. (3.6 / 4MM)<br> Efficient H.265+ compression technology<br> Clear imaging even with strong back lighting thanks to<br>DWDR technology. Water- and dust- resistant (IP67)<br> IR Range Up to 30 meter

ACCESS CONTROL SYSTEM

od140522/2023_2024 : Supply, installation, testing, commissioning, and maintenance of Access Control System including door controller, SMART CARD READER, UPS, Cables, PVC Conduit, Access Control System etc complete Engineer in charge.

Air Conditioner

od140523/2023_2024 : Supply, installation, testing and commissioning of 1.5 tons 5 star Air Conditioner incluidng all accessories etc complete Engineer in charge.

Toughened glass

od140524/2023_2024 : Providing and fixing 12 mm thick frameless toughened glass of<br>approved brand and manufacture, including providing and fixing top & bottom<br>pivot & spring type fixing arrangement and making necessary holes etc. for<br>fixing required door fittings, all complete as per direction of Engineer-in-<br>charge (2.4X1.5 )

Electrical Cradle

od140525/2023_2024 : Supply and providing Electrical Cradle including all accessories etc. complete Engineer in charge

CIVIL WORKS

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15sup0/sup landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

od170390/2023_2024 : Supplying and providing Metal container size of 2.4m x 6 m including cost , conveyance labor charge etc. complete Engineer in charge

od170389/2023_2024 : Supplying and providing Marine Plywood of Thickness: 18mm for flooring including cost , conveyance labor charge etc. complete Engineer in charge

11.41.3 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800x 800 mm

26.24.1 : Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete.With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles

13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.48.2 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

26.23.1 : Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge.With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles

od170392/2023_2024 : Supplying and proving TV CABIN Perfect Homes Sirena Engineered Wood TV Entertainment Unit (Finish Color - Almond Walnut, Knock Down)<br>Material: Particle Board<br>W x H x D: 150 cm x 131.57 cm x 39.62 cm (4 ft 11 in x 4 ft 3 in x 1 ft 3 in)<br>Ideal TV Size: 39 inch<br>Number of Drawers: 2, Number of Open Shelves: 6 including cost ,conveyance , fitting charge etc. complete Engineer in charge

od140514/2023_2024 : Supplying , providing and installation of 80 cm (32 Inch) HD Ready LED Smart Tizen TV incluidng all accossories.

16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

od170393/2023_2024 : Supplying and providing Bajaj Bahar 300mm Exhaust Fan (Metallic Grey) including cost , conveyance , labour charge etc. complete Engineer incharge

od170394/2023_2024 : Supplying and providing LED Luminaire type down lighter No-111326 BZSLO 12W NW including cable, cost<br>conveyance labour charges etc.as per the direction of the engineering charge