Forest Industries Travancore Limited Tender

SUPPLY OF LAB SETUP FOR GOVT HIGHER SECONDARY SCHOOL chowara

Chemistry & Biology working table (3600x1200x850(h)mm)Reagent stand 2 Tier 900mm 2 Nos: The metal two tier reagent rack provided shall be in various length and width as specified. The base of the reagent rack fitted to the worktop shall be made of polymer base material.Vertical section shall be made of 100*40 mm size aluminium, extrusion from aluminium alloy 6063&T6 grade for strength stability and rigidity.The profile ends should be covered and protected with polymer end caps. Vertical section shall be groove for knock down assembly of service box and adjustable shelves.Shelves should be adjustable to any required height with friction technology without any holes.Extrude aluminum front and back runners should be provided to the entire length in order to prevent object falling from the shelves. The entire section should be polyester epoxy powder coated to 50 microns for aesthetics.8 mm thick toughened glass/ 6 mm thick wired glass shall be provided on each shelf for ease of removal and cleaning. Under bench cabin-800x850x400mm-2 Nos The Carcass,Cabinet,Shutters and Shelves etc. shall be constructed from 16 mm BWR 303 GR Plywood with both side 0.8 mm Thick HP laminated.The expose side edges of shutters,shelves and other panels shall be sealed with 0.8/2 mm PVC edge banded. The lamination and edging shall be machine pressed at high pressure. Hinges,Handle,fasteners and level adjustable fittings etc are ebco/Hettich or leading brands. Knees space frame and panel:- Constructed by both side laminated ply wood with pvc edge banding and fitted or assembled with knock down hardware and fittings, Level adjustable pins are fitted in bottom of panels. Gas tap 2 way,2 nos: Brass inject mould epoxy powder coated body, Valves are made for burning gas purpose. IS 8737 Grade. Gas service line work, 10mtr Mtr:Multilayer composite Pipe (PE-AL-PE) with Brass fittings for main lines, Multilayer flexi tube for distribution line to burners (made in KOREA)Bunsen Burner ,4nos: Cast Iron weighted base and Branss burning tube.Table top, 48 sqft: Ceramic tiles shall be branded Ceramic coated tiles with bottom support Porcelin slabs.Epoxy beeding,: Pure Epoxy black color hard material Angle edge beeding for preventing spillage and leakage of chemicals and contaminated water on worktop and affect the cabin drawers even lab people clothes.Sink big 600x450mm,:5 mm thick polypropylene with black color body, These sinks helps prevent glassware from breaking easily when washed. It also helps to avoid spotting quickly from stain marks.Sink cabin 600*775*1100mm: The Carcass,Cabinet,Shutters and Shelves etc. shall be constructed from 16 mm BWR 303 GR Plywood with both side 0.8 mm Thick HP laminated.The expose side edges of shutters,shelves and other panels shall be sealed with 0.8/2 mm PVC edge banded. The lamination and edging shall be machine pressed at high pressure. Hinges,Handle,fasteners and level adjustable fittings etc are ebco/Hettich or leading brands.Sink 350*350mm: 5 mm thick polypropylene with black color body, These sinks helps prevent glassware from breaking easily when washed. It also helps to avoid spotting quickly from stain marks. Water tap Two way 1 nos Brass inject mould epoxy powder coated body, Valves are made for water outlet purpose. IS 8737 Grade.Three way water tap 1 nos : Brass inject mould epoxy powder coated body, Valves are made for water outlet purpose. IS 8737 Grade.Peg board 1 nos: 9 pegs Inject mould ABS material board and 49 pegs with drain canal and dripping tube. Water and waste water service 16Mtr: It shall be 10 kg water PVC pipes and connectors and 6 kg waster water PVC pipes and fittings.

Physics and Social laboratory working table (3600*1200*850mm)Work top 24 mm Pre-Laminated MDF 32 sqft : Panels shall be constructed from 17 mm Pre-Laminated Mild Density Fibre Panel, The expose side edges shall be sealed with 0.8/2 mm PVC edge banded.Under bench cabin-800x850x400mm-2 Nos The Carcass,Cabinet,Shutters and Shelves etc. shall be constructed from 16 mm BWR 303 GR Plywood with both side 0.8 mm Thick HP laminated.The expose side edges of shutters,shelves and other panels shall be sealed with 0.8/2 mm PVC edge banded. The lamination and edging shall be machine pressed at high pressure. Hinges,Handle,fasteners and level adjustable fittings etc are ebco/Hettich or leading brands.Knees space frame and panel:- Constructed by both side laminated ply wood with pvc edge banding and fitted or assembled with knock down hardware and fittings, Level adjustable pins are fitted in bottom of panels.Electrification work 16 Mtr: Electrical cabling work with conduiting, from existing DB (Distribution box)