Fertilisers And Chemicals Travancore Limited Tender

Differential Pressure Transmitter ( Capillary Diaphragm type ) Service : Ammonium Sulphate Liquor Pressure Range : -600 to 5000 mmWC Calibration Range : −70 to 430 mmWC Capillary Length : 5 meters, PVC Insulated Stainless Steel armoured Process Connection : 4 inch ANSI 150# H.P. side : Capillary Flush diaphragm, Slip on flange, 4 inch ANSI 150# SS316 L.P. side : Capillary Flush diaphragm, Slip on flange, 4 inch ANSI 150# SS316 Filled Fluid : Manufacturer’s standard Diaphragm Material : SS316L Operating pressure nor/max : 3000mmWC / 5000 mmWC Operating temperature range : 50 Deg C to 100 Deg C Power Supply : 24V DC, 2 wire Output : 4 to 20 mA with HART Accuracy : ±0.2% of Span Local Display : LCD, Configurable. Protection : IP 67 and Ex-proof to Gr.IIA and IIB T4 Configuration / Calibration : Through HART and Keypad Self Diagnostics : Required Electrical connection : 1/2 Inch NPTF Sensor Housing and Flanges : SS316 or equivalant Mounting : 2 inch Pipe mounted Mounting Accessories : Stainless steel bracket, Clamps and fasteners

Differential Pressure Transmitter (Capillary diaphragm type) Service : Ammonium Sulphate Vapour Pressure Range : - 600 to 5000 mmWC Calibration Range : 0 to 1000 mmWC Capillary Length : 5 meters, PVC Insulated Stainless Steel armoured Process Connection : 3 Inch, ANSI 150# H.P. side : Capillary Flush diaphragm, Slip on flange, 3 inch ANSI 150# SS316 L.P. side : Capillary Flush diaphragm, Slip on flange, 3 inch ANSI 150# SS316 Filled Fluid : Manufacturer’s standard Diaphragm Material : SS316L Operating pressure range : -700 mmWC to 1000 mmWC Operating temperature range : 160 Deg C to 180 Deg C Power Supply : 24V DC, 2 wire Output : 4 to 20 mA with HART Accuracy : ±0.2% of Span Local Display : LCD, Configurable. Protection : IP 67 and Ex-proof to Gr.IIA and IIB T4 Configuration / Calibration : Through HART and Keypad Self Diagnostics : Required Electrical connection : 1/2 Inch NPTF Sensor Housing and Flanges : SS316 or equivalant Mounting : 2 inch Pipe mounted Mounting Accessories : Stainless steel bracket, Clamps and fasteners

Differential Pressure Transmitter (Capillary Diaphragm type) Service : Ammonium Sulphate Vapour Pressure Range : - 400 to 1000 mmWC Calibration Range : -100 to 100 mmWC Capillary Length : 5 meters, PVC Insulated Stainless Steel armoured Process Connection : 3 Inch, ANSI 150# H.P. side : Capillary Flush diaphragm, Slip on flange, 3 inch ANSI 150# SS316 L.P. side : With 1/4 NPT (Vent / Drain Plug) or Mfr STD Filled Fluid : Manufacturer’s standard Diaphragm Material : SS316L Operating pressure range : -400 mmWC to 1000 mmWC Operating temperature range : 160 Deg C to 180 Deg C Power Supply : 24V DC, 2 wire Output : 4 to 20 mA with HART Accuracy : ±0.2% of Span Local Display : LCD, Configurable. Protection : IP 67 and Ex-proof to Gr.IIA and IIB T4 Configuration / Calibration : Through HART and Keypad Self Diagnostics : Required Electrical connection : 1/2 Inch NPTF Sensor Housing and Flanges : SS316 or equivalant Mounting : 2 inch Pipe mounted Mounting Accessories : Stainless steel bracket, Clamps and fasteners

Differential Pressure Transmitter (Flush Diaphragm type) Service : Ammonium Sulphate Solution Level Range : 0 to 20000 mmWC Calibration Range : 0 to 14720 mmWC Process Connection : 4 inch ANSI 150# H.P. side : Flush diaphragm, Slip on flange, 4 inch ANSI 150# SS316 L.P. side : With 1/4 NPT (Vent / Drain Plug SS316) or Mfr STD Filled Fluid : Manufacturer’s standard Diaphragm Material : SS316L Operating pressure range : 4000 mmWC to 15000 mmWC Operating temperature range : 80 Deg C to 100 Deg C Power Supply : 24V DC,2 wire Output : 4 to 20 mA with HART Accuracy : ±0.2% of Span Local Display : LCD, Configurable. Protection : IP 67 and Ex-proof to Gr.IIA and IIB T4 Configuration / Calibration : Through HART and Keypad Self Diagnostics : Required Electrical connection : 1/2 Inch NPTF Sensor Housing and Flanges : SS316 or equivalant

Differential Pressure Transmitter (Flush Diaphragm type) Service : Ammonium Sulphate Solution Level Range : 0 to 5000 mmWC Calibration Range : 0 to 2000 mmWC Process Connection : 3 inch ANSI 150# H.P. side : Flush diaphragm, Slip on flange, 3 inch ANSI 150# SS316 L.P. side : With 1/4 NPT (Vent / Drain Plug SS316) or Mfr STD Filled Fluid : Manufacturer’s standard Diaphragm Material : SS316L Operating pressure range : 4000 to 15000 mmWC Operating temperature range : 80 to 100 Deg.C Power Supply : 24V DC, 2 wire Output : 4 to 20 mA with HART Accuracy : ±0.2% of Span Local Display : LCD, Configurable. Protection : IP 67 and Ex-proof to Gr.IIA and IIB T4 Configuration / Calibration : Through HART and Keypad Self Diagnostics : Required Electrical connection : 1/2 Inch NPTF

Differential Pressure Transmitter. Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/-0.1% of span or better Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 and Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry and Size : 2 Nos and ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location :Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories: Required ( 2 pipe mounting, MOC-SS304 ) Range : 0 to 15000 mmWC Rangeability : 1:100 Process connection : 1/4 NPT (F) Static pressure Limit: 160 Kg/Cm2 Min.

Flanged DP Type Level Transmitter Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.15% or better Rangeability : 1:50 Process Body : SS or better Sensor Material : As per manufacturer std Drain & Vent Plug (As applicable) : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 & Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 No's & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location : Side wise Required (As applicable). Sensor Temp.Limit : 120°C Range : 0 to 5900mmwc Process connection : Flanged type (integral flush diaphragm) Diaphragm Material : SS 316L or Hastelloy C or better Connection size HP : 3 ANSI 150# RF Connection size LP : Manufacturer Std. Ref. Sketch : FACT Drawing No. M Static Pressure limit : Flange Rating Pressure.

Flanged DP Type Level Transmitter Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.15% or better Rangeability : 1:50 Process Body : SS or better Sensor Material : As per manufacturer std Drain & Vent Plug (As applicable) : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 & Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 No's & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location : Side wise Required (As applicable). Sensor Temp.Limit : 120°C Range : 0 to 8808 mmwc Process connection: Flanged type (Integral Extended diaphragm) Diaphragm Material: SS 316L or Hastelloy C or better Connection size HP : 4 ANSI 150# RF Connection size LP : Manufacturer Std. Ref. Sketch : FACT Drawing No. M Static Pressure limit : Flange Rating Pressure.

Flanged DP Type Level Transmitter Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.15% or better Rangeability : 1:50 Process Body : SS or better Sensor Material : As per manufacturer std Drain & Vent Plug (As applicable) : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 & Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 No's & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location : Side wise Required (As applicable). Sensor Temp.Limit : 120°C Range : 0 to 920 mmwc Process connection: Flanged type (Integral Extended diaphragm) Diaphragm Material: SS 316L or Hastelloy C or better Connection size HP : 4 ANSI 150# RF Connection size LP : Manufacturer Std. Ref. Sketch : FACT Drawing No. M Static Pressure limit : Flange Rating Pressure.

Differential Pressure Transmitter. Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/-0.1% of span or better Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 and Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry and Size : 2 Nos and ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location :Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories: Required ( 2 pipe mounting, MOC-SS304 ) Range : -818.6 TO -539.69mmWC Rangeability : 1:100 Process connection : 1/4 NPT (F) Static pressure Limit: 160 Kg/Cm2 Min.

Flanged DP Type Level Transmitter Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.15% or better Rangeability : 1:50 Process Body : SS or better Sensor Material : As per manufacturer std Drain & Vent Plug (As applicable) : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 & Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 No's & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location : Side wise Required (As applicable). Sensor Temp.Limit : 120°C Range : 0 to 10000 mmwc Process connection: Flanged type (integral flush diaphragm) Diaphragm Material: SS 316L or Hastelloy C or better Connection size HP : 3 ANSI 150# RF Connection size LP : Manufacturer Std. Ref. Sketch : FACT Drawing No. M Static Pressure limit : Flange Rating Pressure.

Differential Pressure Transmitter. Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/-0.1% of span or better Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 and Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry and Size : 2 Nos and ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location :Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories: Required ( 2 pipe mounting, MOC-SS304 ) Range : 0 to 40 mmWC Rangeability : 1:50 Process connection : 1/4 NPT (F) Static pressure Limit: 50 Kg/Cm2 Min.

Differential Pressure Transmitter. Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/-0.1% of span or better Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 and Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry and Size : 2 Nos and ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location :Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories: Required ( 2 pipe mounting, MOC-SS304 ) Range : 0 to 640 mmWC Rangeability : 1:100 Process connection : 1/4 NPT (F) Static pressure Limit: 160 Kg/Cm2 Min.

Differential Pressure Transmitter. Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/-0.1% of span or better Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 and Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry and Size : 2 Nos and ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location :Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories: Required ( 2 pipe mounting, MOC-SS304 ) Range : 0 to 2000 mmWC Rangeability : 1:100 Process connection : 1/4 NPT (F) Static pressure Limit: 160 Kg/Cm2 Min.

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 - 60 Kg/cm2g Over pressure Limit: 1.5 Times of Instrument Maximum Span.

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 - 40 Kg/cm2g Over pressure Limit: 1.5 Times of Instrument Maximum Span.

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : -1 to 20 Kg/cm² Service : NH3 Barge loading Over pressure Limit: 1.5 Times of Instrument Maximum Span.

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 to 4KG/CM2 Over pressure Limit : 1.5 Times of Instrument Maximum Span.

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 - 10 Kg/cm2g Over pressure Limit: 1.5 Times of Instrument Maximum Span.

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 - 20 Kg/cm2g Over pressure Limit: 1.5 Times of Instrument Maximum Span.

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 - 160 Kg/cm2g Over pressure Limit: 1.5 Times of Instrument Maximum Span.

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 - 25 Kg/cm2g Over pressure Limit: 1.5 Times of Instrument Maximum Span.

Differential Pressure Transmitter. Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/-0.1% of span or better Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 and Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry and Size : 2 Nos and ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location :Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories: Required ( 2 pipe mounting, MOC-SS304 ) Range : 0 to 750 mmWC Rangeability : 1:100 Process connection : 1/4 NPT (F) Static pressure Limit: 160 Kg/Cm2 Min. Service : Oxygen Service ( All materials shall be suitable for Oxygen Service).

Differential Pressure Transmitter. Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/-0.1% of span or better Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 and Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry and Size : 2 Nos and ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location :Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories: Required ( 2 pipe mounting, MOC-SS304 ) Range : 0 to 2500 mmWC Rangeability : 1:100 Process connection : 1/4 NPT (F) Static pressure Limit: 160 Kg/Cm2 Min. Service : Oxygen Service ( All materials shall be suitable for Oxygen Service).

Differential Pressure Transmitter. Type : 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/-0.1% of span or better Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection : IP 65 and Exproof to Class 1 , Div1, Grp IIC, T3. Enclosure material : Aluminum Alloy Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry and Size : 2 Nos and ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range and unit ) Vent/drain plug location :Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories: Required ( 2 pipe mounting, MOC-SS304 ) Range : 0 to 5000 mmWC Rangeability : 1:100 Process connection : 1/4 NPT (F) Static pressure Limit: 160 Kg/Cm2 Min. Service : Oxygen Service ( All materials shall be suitable for Oxygen Service).

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 to 4 Kg/cm2 Over pressure Limit: 1.5 Times of Instrument Maximum Span. Service : Oxygen Service ( All materials shall be suitable for Oxygen Service).

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 to 10 Kg/cm2 Over pressure Limit: 1.5 Times of Instrument Maximum Span. Service : Oxygen Service ( All materials shall be suitable for Oxygen Service).

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 to 75 mm Hg Abs Over pressure Limit: 25 Kg/cm2 or higher.

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 to 2 Kg/cm2 Abs Over pressure Limit: 25 Kg/cm2 or higher.

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 to 4 Kg/cm2 Abs Over pressure Limit: 25 Kg/cm2 or higher.

Pressure Transmitter. Type: 2 Wire, Electronic, configurable with HART Sensor : As per manufacturer std Accuracy : +/- 0.1% or better Rangeability : 1:100 Process Body : SS316 or better Sensor Material : SS 316L or Hastelloy C or better Drain & Vent Plug : SST or better Material of bolts and nuts : SST or better Process Flange Gasket/O - ring : PTFE or better Protection: IP 65 & Exproof to Class 1 , Div1, Gr. IIC, T3. Enclosure material : Aluminum Alloy Process connection : Bottom Entry; 1/2 NPT Painting: Polyurethane or suitable for Industrial corrosive application. Power supply : 24V DC, Output: 4-20 mA DC Cable Entry & Size : 2 Nos & ½ NPT (F) Local indication : Integral Digital LCD display, (field configurable for range & unit ) Vent/drain plug location : Side wise Required. Sensor Temp.Limit : 120°C Mounting accessories : Required (2 pipe mounting, MOC-SS304 ) Range : 0 to 400 mm Hg Abs Over pressure Limit: 25 Kg/cm2 or higher.