Fertilisers And Chemicals Travancore Limited Tender

Inst.Cable tray fab.& Fix -Acid Plant-UC

Installation of Junction Boxes of size 350x420x150mm (approx) on newly fabricated MS Supports with GRP type CANOPY. The work shall include the fabrication of MS supports with necessary holes drilled for mounting the JBs & CANOPY and fixing it to the available structures by welding/using fastners (SS 304 bolt, nut and washers)/ anchor bolts). The Junction box & Canopy shall be mounted to the newly fabricated MS supports by using SS304 nut, bolt and washers of size M6 X 40. All the materials except SS304 Bolts, nuts & washers will be issued by FACT, free of cost (Required SS Bolts, nuts & washer to be supplied by the contractor). The canopy size (WxDxH) is approximately 550x450x325mm.

Fabrication and Fixing of Ladder Type MS Cable tray (10-20 cm). The scope of work includes transportation of all necessary items (including free supply items from FACT) to site. The scope of work also includes Fabrication of ladder type cable racks of width: 10cm to 20cm using MS angles of size 50x50x6mm and MS flats of size 50x6 mm. MS flat cable supports shall be provided as cross bar at intervals of 40cm by proper welding.The scope of work also includes fixing of fabricated MS tray on available structures by welding/using fastners (SS 304 bolt, nut and washers)/ anchor bolts). Support to the cable tray shall be of MS angle(ISA65x65x6mm/ ISA50x50x6mm)/channel(ISMC100x50). The work shall include painting of MS cable tray and supports with one coat of epoxy-based primer and two coats of epoxy paint of dark grey colour. Supply of all items other than MS angles and flats required for the completion of work like welding electrodes, fasteners, paint, primer etc are included in the scope of bidder.