District Nirmithi Kendra Tender

Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Supplying and fixing entrance board

Appendix B- Footpath

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Appendix D - Toilet

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost ofcentering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door fame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 m or top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mmwide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottomrail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on bothsides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification &drawing.30 mm thick plain PVC door shutters

Applying one coat of water thinnable cement primer of approved brand and manufacture on wallsurface:Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Electrical works

Plumbing works including septic tank and waste pit

Appendix E- Coffee counter and Ticket counter

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete

Supplying and laying Galvalume trafford sheet 0.5 mm or nearest size over the truss work including positioning with corrosion resistant self drilling screws including all materials, labour, conveyence etc.complete.

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Providing and fixing Children Playground Euipment /Wellness Zone / Garden Décor (Refer attachment for detailed specification)

Giraffe swing:- product Area: 10 ft x 8 ft. Safe Play Area: 20 ft x 20 ft Swing Frame is made up of 100 NB GI pipe.Supporting Frane is made up of 100 NB GI pipeSpecial Design pipe Clamps Hold Casting Assembly of bearings. It GIves Noiseless and Smooth Movement to The Swing. Round Cobalt Coated Short Link Chain of 8 mm Diameter (Electric Butt Welded) As Per ISI: 2429, Which Can Carry A Weight of 400 Kg.The Chain is Rubbrised Coated .S.S S-Hook is Used to Hang Chain in Rubber belt. Seat is made up 25 NB GI pipe Frame Coverd with Nylon Rope Net.Diameter of Seat is1.1 Mtr.

2 seater spring rider alligator- Product are 5 ft x 1.3 ft . Safe play Area : 8 ft x 4.3 ft Spring assembly is made up of square plates and compression spring. Two no compression spring is made up of 22 dia wire, spring dia is 150 mm and height is 1 ft. Stand is made up of 40 NB GI pipe. Plate is welded on it to fix plastic dionsaur on it firmly. Character is made up of LLDPE plastic with rotational moulding process. length of Dinosaur is 1700 mm long. It has inbuilt handle and foot rest. Two children can sit on rider at a time

2 seated spring rider dinosaur- product area- 5.3 ft x 1.8 ft. Safe play area- 8.3 ft x 4.8 ft Spring assembly is made up of square plates & compression spring. Two no compression spring is made up of 22 dia wire, spring dia is 150 mm and heighti s 1 ft. Stand is made up of 40 NB G.I pipe. Plate is welded on it to fix plaistic dinosaur on itfirmly Character is made up of LLDPE plastic with rotational moulding process. Length of Dinosaur is 1700 mm long. It has inbuilt handle and foot rest Two children can set on rider at a time.

Tripple swing with mother toodler seat : product are. 6' ft x 5.3'ft . Safe play area - 12 ft x 8.3 ft Top bar is made up of 50 NB GI pipe having 2 nos. of junction box at the end. The length of top bar is 1.5 m long. Jnction box is designed in such a way for fixing 2 no. of leg pipe made up of 40 NB GI pipes, in an angle to GIve stability to swing. Special design pipe clamps hold casting assembly of bearings. It GIves noiseless and smooth movement to the swing. Round cobalt coated short link chain of 8 mm diameter (electric butt welded) as per ISI 2429, which can carry a weight of 400 kg. The chain isrubbrised coated S.S S-hook is used to hang chain in rubber belt.One rubber seat and one toddler seat is made up of rubber with non-skid surface with nylon lining in sandwich pattern.belt seat should be 13 mm thick. S.S. triangular hook is molded in belt in such a way that it won’t project from the top surface of the belt seats. toddler seat and belt seat attach with frame made up of 25 NB GI pipe Double Swing: Product Area : 9'Ft x 6'Ft Safe Area : 13'Ft x 13'Ft Top bar is made up of 50 NB G.I pipe having 2 nos. of junction box at the end.The length of top bar is 2.8m long. Junction box is designed in such a way for fixing 2 no. of leg pipe made up of 40 NB G.I pipes in an angle to give stability to swing.The length of leg pipe is 2900 mm long. Special design pipe clamps hold castingassembly of bearings. It gives noiseless and smooth movement to the swing. Round cobalt coated short link chain of 8 mm diameter (electric butt welded) as per isi: 2429,which can carry a weight of 400 kg. The chain is rubbrised coated. S.S S-hook is used to hang chain in rubber belt. Seat is made up of rubber with non-skid surface with nylon lining in sandwich pattern. Belt seat should be 13 mm thick. S.S triangular hook is molded in belt in such a way that it won’t project from the top surface of the belt seats

6'6" Pyramid merry go round Minimum height of the rotating climber will be 2.4 mtr. Minimum diameter of platform will be 1.9 mtr. Stand is made up of 150 NB GI C-Class pipe. Centre support of climber will be made up of 150 NB GI C-Class pipe. Platform is made up of MS Rectangular pipe 75 x 50 x 14 SQG. Platform is covered with 14 SWG GI sheet. Heavy duty bearing shaft will ensure smooth circular movement of climber. Net is made up of 16 mm six stranded terylene rope. Each strand is consisting of 1.5 mm steel core wire in Terylene fibre. Fire core of sisal & hemp is given in the rope for adequate flexibility. East rope end is secured with Aluminium sleeve. Specially desined GI clamps are welded on platform frame to hold rope clamps. Specially desinged nylon clamps and nylon spacers are used for fixing rope with the main frame. Specially designed nylon ball clamps are used for forming rope mesh. Tree Cap made up of LLDPE plastic is fixed on top of the centre pipe.

Maestra Bench- Product area - 4 ft x 2 ft Safe play area - 8 ft x 6 ft

Trunk bin- Product area Diameter 1.3 ft Capascity - 75 ltrs

Multi play system- Product area- 41 ft x 34.1 ft Safe Area - 51 ft x 44.1 ft Children at a time : 50 nos Age group - 5-12 yrs Roto Tile Canopy -Tile Canopy is made up of LLDPE roto moulded plastic. this is in square shape .Tile Canopy size will be 1500 mm X 1500 mm. Roto House Canopy- House Canopy is made up of LLDPE roto moulded plastic.this is in shape of House Roof. House Canopy size will be minimum – 1500 mm X 1600 mm. Roto HexCone Canopy -The Canopy is made up of LLDPE plastic. It is fixed nn 6 pieces Roto Arch Canopy- Arch Canopy is made up of LLDPE roto moulded plastic with UV Grade,this is in arch shape GI Square Deck Platform 3'Ht (4x4) -Square Platform is made up of 14 SWG GI sheet. Size of platform will be 1160 x 1060 MM . Flange width of platform will be 75 mm. 20 mm x 3 mm Dimples are embossed on Platform for antiskid surface. Stiffeners made up of 14 SWG GI Sheet are provided below Platform for additional safety. GI Square Deck Platform 5'Ht (4x4) -Square Platform is made up of 14 SWG GI sheet. Size of platform will be 1160 x 1060 MM . Flange width of platform will be 75 mm. 20 mm x 3 mm Dimples are embossed on Platform for antiskid surface. Stiffeners made up of 14SWG GI Sheet are provided below Platform for additional safety.GI Hex Deck Platform 3'Ht (3x3) The platform shall be made in G.I sheet. The size of platform is diagonal min 2230 mm. The platform will be mounted on 100 NB pipe by use of specially moulded lugs bolted with M10 fasterners. The bolt with M10 sterners. The bolt head shall be suitable covered that no sharp corners of bolt are exposed. Nylon cap for 80 NB B-Class G.I. pipes is given at the end of the pipe for the safety purpose. Flange width of platform will be 75 mm. 20 mm x 3 mm dimples are embossed on platform for antiskid surface. Stiffeners made up of 14 SWG G.I. sheet are provided below platform for additional safety.GI Hex .Platform 9'Ht (4x4) The platform shall be made in G.I sheet. The size of platform is diagonal min 2230 mm. The platform will be mounted on 100 NB pipe by use of specially moulded lugs bolted with M10 fasterners. The bolt with M10 fasterners. The bolt head shall be suitable covered that no sharp corners of bolt are exposed. Nylon cap for 80 NB B-Class G.I. pipes is given at the end of the pipe for the safety purpose. Flange width of platform will be 75 mm. 20 mm x 3 mm dimples are mbossed on platform for antiskid surface. Stiffeners made up of 14 SWG G.I. sheet are provided below platform for additional safety. GI Trapizium Platform 7'Ht(4x4) The Trapezium platform is made up of the GI sheet 14 SWG. The vertical platform support pipes are made up of 80 NB powder coated GI pipes. The slide entry is made up of 20 NB powder coated GI pipes. The slide entry is mounted on 80 NB and 20 NB nylon clamp. Flange width of platform will be 75 mm. 20 mm x 3 mm dimples are embossed on platform for antiskid surface. Stiffeners made up of 14 SWG GI sheet are provided below platform for additional safety.FRP Plain Bridge 4' 8 Ft Long The width of bridge shold be 1160 mm wide and is made up of Fiber Reinforce Plastic with non skid surface side. Railing is made up of 20 NB & 15 NB GI pipe. Railling are attaching with specially design nylon clamp Roto SplitLevel Ladder The purpose of this ladder is to combine suitable two different sized decks. It is made up of roto moulded plastic.Roto Slant Bridge 8’Ft Long It is made up of LLDPE plastic. These steps are fitted on 50x50 square pipes. Bridge railing is made up of 20 NB ‘B’ class Jindal/Bhushan make GI pipe and 15 NB ‘B’ class Jindal/Bhushan make GI pipes. Plastic step size will be minimum 800 mm x 375mm and the inside dimension of the step should be minimum 660mm x 245 mm. This bridge will connect 2 platform with different heights Roto Cross Railing It is made in LLDPE, rotational molding process. The railing is supported by 20NB GI pipes with Nylon clamps. Roto Cross &Zero Railing Cross & Zero cubes are made of linear low ensity plastic in rotational moulding process. The LLDPEused is non ageing, non-toxic, foodgrade and UV stabilised. Wall thickness is of 4 mm. The railing is supported by 20NB GI pipes with Nylon clamps. Roto Window Railing It is made in LLDPE, rotational molding process. The railing is supported by 20NB GI pipes with nylon clamps. Roto Bubble Pannel This railing is made up ofrotational molding process which consists of LLDPE mixed with UVstabilized food grade material for making it UV resistant. The railing is fixed on powder coated GI pipe frame of 20 NB pipes. Bbble is made up of acrylic which fixed inside the frame with the help of SS nut bolt. The railing is supported by 20NB GI pipes with nylon clamps.Roto DoubleSlide Entry Slide entry is made up of LLDPE plastic in rotational moulding. Roto ShrimpSlide 3’Ht The module is made up of LLDP roto moulded plastic. The inside dimension of the slide will be 650 mm. The length of the slide will be min 1550 mm. Height of the slide wall will be Depth-150 mm, Width -425 mm, Running-2000 mm Roto Double Wave Slide 3’Ht Roto Wave slide is made up of specially formulated food grade LLDPE mixed with UV stabilizer & antioxidants to protect it from UV rays & its effects & to prevent oxidization respectively. The chute has its end such as it causes safe landing of the child. The landing portion should be in horizontal with respect to the ground. There should be support provided made up of 25 NB GI pipe. Roto Double Wave Slide 5’Ht The Wave slide chute is made up of LLDPE plastic with landing module parallel to the ground. Height of the slide : Width -1180 mm, Length - 3050mm Roto Straight Open Slide 3'Ht The module is made up of LLDP plastic. The inside dimension of the slide will be 420 mm. Roto StraightSlide 7'Ht The module is made up of LLDP plastic. The inside dimension of the lide will be 420 mm. Roto Spiral Tube Slide 9'Ht Slide Chute is made up of LLDP plastic in Roto Molding Process. Slide is supported by 'T' upport made up of 80 NB GI pipe & Slide LSupport is made up of 40 NB GI B- Classpipe GI Staircase 3’Ht Staircase is made up of 14 WG GI. Riser of staircase will be 152 mm and trade will be 186 mm.Width of the staircase will be 600 mm. Staircase side width will be 188 mm .Staircase railing will be made up of 25 NB & 20 NB GI B-class pipe. 20 mm x3 mm Dimples are embossed on staircase for antiskid surface FRP Rock climber 7’ht- rock climber is made up of fibre reinforce plastic. Injection moulded rock hold are fitted on same platform. It has gradient of 65 degree with the ground inimum 8 rock hold will be of nylon in three colours. Support frame should be given from the back of strength. The centre pipe is made of 25 NB GI pipes. Roto cliff pods of different colours are attached for climbing purpose. The basic frame of climber is made of 40 NB ‘B’ class Jindal/bhushan make GI pipes. The loops is made up of 25 NB ‘B’ lass Jindal/ bhushan make GI pipes. Climber is made up of LLDPE plastic. Two no of panel is connected with platform with 75 X 5 ms flat. Army net climber is facilitating children to climb from 3 ft ht platform to 6ft ht platform. It is C-shape type climber made in ombination of pipe & rope. Army net climber structure is made up of 20NB & 15NB GI B class pipe. Net is made up of 16mm six standed terylene rope eacg strand is consist of 1.5mm steel corewire in terylene fiber. Fiber core of sisal & hemp is given I the rope for adequate flexibility each rope end is secured with GI sleev. Specially designed GI clamps are welded on pipe frame to hold rope clamps. Specially designed nylon clamps and nylon spacers are used for fixing rope with the main frame. Specially designed nylon bail clamps are used for forming rope mesh. Palm tree is made of linear low density plastic in rotational moulding process. It is ttached to enhance the beauty of the product. Sunflower is made up of LLDPE in rotational moulding process.

Interwine climber- Prduct Area 21 Ft x 6 ft. Safe play area- 24 ft x 9 ft. Roto triangular ring climber side frame is made up of 80 NB GI B-Class pipe in curve shape. Main Vertical Structure Made up of 80 NB GI B glass Pipe & Attachment in 65 NB GI B Class Pipe. Four no of roto triangular ring is made up of LLDPE plastic. 16 mm six stranded terylene rope is used for connecting roto triangular ring with main frame. Each strand is consist of 1.5 mm steel core wire in terylene fibre. Specially designed GI clamps are used for connecting roto ring with terylene rope. Fibre core of sisal & hemp is given in the rope for adequate flexibility. Each rope end is secured with GI sleeve. Specially designed GI clamps are welded on pipe frame to hold rope clamps. Specially designed nylon clamps and nylon spacers are used for fixing rope with the main frame. Rock climber frame is made up of 65 NB GI B-Class pipe. Rock climber is made up of GI Sheet. Rock holds are made up of nylon The abstract climber panel is made up of LLDP plastic having double wall. The inside dimension of the panel is 1010 x 800 x 100 mm Two no of panels are connected with main pole made up of 80 NB GI B-Class pipe with specially design clamps. Swing seat is made 20 NB GI Pipe covered with nylon Braided Rope 10 mm Rope.

Freight charges

General electrical works

Providing Landscaping works