Collector Office Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Collector Office Tender
Coronavirus COVID 19
Eprocure
Opening Date28 May 2019
Closing DateCancelled
Tender Amount₹ 1,17,00,000
Costs
EMD
₹ 50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_DNKML_278729_1Bid Award Id
ViewTender No
NKMP/E-TENDER/ P1 / 468/ 18-19Tender Authority
Collector Office ViewPurchaser Address
-Website
http://mahatenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
od64112/2018_2019
Dry rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete
1:6:12 ( 1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) including cost of
through stone and bond stone.
19.296
-
3829.19
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement
concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth
level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
10.855
-
5443.13
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers
not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to
50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
27.865
-
427.2
5.1.2
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of
centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse
sand :3 graded stone aggregate 20 mm nominal size
11.223
-
8530.57
5.2.2
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth
and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level
excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand :
3 graded stone aggregate 20 mm nominal size)
4.261
-
9807.61
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,
balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor
five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :
1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
18.447
-
10143.87
5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of
columns, etc for mass concrete
16.96
-
266.2
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,
girders bressumers and cantilevers
77.641
-
470.63
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
98.67
-
579.61
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
2624.865
-
77.68
50.6.7.2
Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement
mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour
charges etc.
27.535
-
6828.11
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
609.322
-
237.37
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be
specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours
White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand),
including grouting the joints with white cement and matching pigments etc., complete.
80.421
-
1128.81
11.36
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be
specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg
per sqm, including pointing in white cement mixed with pigment of matching shade complete.
12
-
1022.24
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,
approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area
of slab over 0.50 sqm
5.6
-
4273
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or
round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden
frames with rawl plugs screws etc
223.74
-
154.34
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :
733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,
paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium
(minimum thickness of powder coating 50 micron)
61.35
-
527.73
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM
rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -
in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
18
-
1377.92
50.9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
0.081
-
101851.99
50.9.3.1
Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows,
30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with
necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f
Engineer in- charge. using Anjili/ Jack wood
3.591
-
2608.38
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
529.762
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
529.762
-
115.91
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or
more coats on new work
39.826
-
107.6
17.11.2
Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber
plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete,
including painting of fittings and brackets, cutting and making good the wall wherever required:Size
600x450x200 mm
2
-
4407.72
18.15.1
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
2
-
356.99
18.16.1
Providing and fixing brass stop cock of approved quality :15 mm nominal bore
2
-
356.99
ELECTRIFICATION FOR NEW BUILDING
-
-
-
Lump-Sum
1
-
120000
WAITING SPACE FOR EXISTING BUILDING
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
0.608
-
228.38
4.1.3
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size)
0.608
-
7523.98
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
1015.406
-
123.87
12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as
approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to
avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired
by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm)
with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of
purlins, rafters and trusses and including cutting to size and shape wherever required.
78.4
-
755.42
od64464/2018_2019
Providing and fixing 15cm wide, Plain Square PVC gutter with iron brackets 40x3 mm size, bolts, nuts
and washers etc., including making necessary connections with rain water pipes complete.
14
-
527.18
2.1.1
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10
sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be
levelled and neatly dressed:All Kinds of soil
26
-
72.74
16.68
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade
made by block making machine with strong vibratory compaction, of approved size, design & shape, laid
in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the
joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
26
-
845.05
INTERIOR PARTITIONS AND OTHER MAINTENANCE
-
-
-
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :
733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,
paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium
(minimum thickness of powder coating 50 micron)
96.74
-
527.73
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM
rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -
in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
7.2
-
1377.92
od141580/2018_2019
Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural
drawings and directions of Engineer - in- Charge.
12
-
923.51
14.46
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand
papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
226.4
-
14.82
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
226.4
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
226.4
-
115.91
SUPPLYING 3 SEATER CHAIRS (2Nos)
-
-
-
SUPPLYING 3 SEATER CHAIRS
2
-
15000
Lumpsum for round off
-
-
-
Lumpsum for round off
1
-
6096.72
PHC PORUR
SETTING UP OF LAB AND WAITING SPACE
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
5.616
-
228.38
od103507/2018_2019
Dry rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete
1:6:12 ( 1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) including cost of
through stone and bond stone.
5.616
-
3829.19
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement
concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth
level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
3.16
-
5443.13
4.1.3
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size)
0.486
-
7523.98
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers
not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to
50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
9.984
-
427.2
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
638.874
-
123.87
12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to
avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired
by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm)
with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of
purlins, rafters and trusses and including cutting to size and shape wherever required.
49.5
-
755.42
od103521/2018_2019
Providing and fixing 15cm wide, Plain Square PVC gutter with iron brackets 40x3 mm size, bolts, nuts
and washers etc., including making necessary connections with rain water pipes complete.
11
-
527.18
15.10.2
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually /
by mechanical means including stacking of serviceable and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-Charge:In cement mortar
0.967
-
1614.95
50.9.1.2
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or
dash fastener shall be paid for separately) using good quality Pincoda wood
0.041
-
112886.44
50.9.3.2
Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows,
30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with
necessary screws, excluding paneling which will be paid for separately, all complete as per direction of
Engineer in-charge.using Pincoda wood.
1.796
-
2821.33
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size
confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM
1:6 ( 1 cement : 6 coarse sand) etc complete
2.21
-
5867.83
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,
balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor
five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :
1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.315
-
10143.87
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
3.675
-
579.61
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
25.2
-
77.68
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
36.818
-
237.37
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
2.16
-
6146.26
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be
specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours
White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
30.9
-
1128.81
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,
approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area
of slab over 0.50 sqm
4.28
-
4273
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
36.818
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
36.818
-
115.91
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or
more coats on new work
39.358
-
107.6
50.18.8.2.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as
per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall
etc. 20 mm pipe 10 Kgf/ cm2
10
-
285.57
17.11.2
Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber
plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete,
including painting of fittings and brackets, cutting and making good the wall wherever required:Size
600x450x200 mm
1
-
4407.72
SETTING UP OF PHARMACY AND FEEDING ROOM
-
-
-
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :
733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,
paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium
(minimum thickness of powder coating 50 micron)
155.133
-
527.73
od103579/2018_2019
Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural
drawings and directions of Engineer - in- Charge.
34.14
-
923.51
SETTING UP OF OFFICE SPACE IN FIRST FLOOR
-
-
-
15.7.4
Demolishing brick work manually / by mechanical means including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In
cement mortar
6.034
-
1156.61
50.6.5.2
Hollow block masonry using pre cast blocks ( Factory made) of size 40x20x15cm or nearest available
size confirming to IS 2185 part 1 of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
29.991
-
5029.79
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
45.792
-
228.38
od137148/2018_2019
Dry rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete
1:6:12 ( 1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) including cost of
through stone and bond stone.
24.3
-
2940.51
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
0.576
-
6146.26
5.1.2
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of
centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse
sand :3 graded stone aggregate 20 mm nominal size
1.46
-
8530.57
5.2.2
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth
and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level
excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand :
3 graded stone aggregate 20 mm nominal size)
0.912
-
9807.61
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,
balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor
five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :
1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
4.286
-
10143.87
5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of
columns, etc for mass concrete
3.2
-
266.2
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
9.521
-
579.61
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers,
Abutments, Posts and Struts
15.2
-
642.12
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,
girders bressumers and cantilevers
24.864
-
470.63
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
503.441
-
77.68
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
633.653
-
237.37
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be
specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours
White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand),
including grouting the joints with white cement and matching pigments etc., complete.
242.4
-
1128.81
11.20.2
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement
slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20
mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white
cement 50 % Grey cement
8.5
-
1205.88
50.9.1.2
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or
dash fastener shall be paid for separately) using good quality Pincoda wood
0.042
-
112886.44
50.9.3.2
Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows,
30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with
necessary screws, excluding paneling which will be paid for separately, all complete as per direction of
Engineer in-charge.using Pincoda wood.
2.204
-
2821.33
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or
round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden
frames with rawl plugs screws etc
467.142
-
154.34
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :
733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,
paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium
(minimum thickness of powder coating 50 micron)
125.749
-
527.73
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM
rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -
in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
35.1
-
1377.92
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
633.653
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
633.653
-
115.91
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or
more coats on new work
30.376
-
107.6
10.28
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.,
including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the
same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary
accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the
floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.)
36.12
-
648.37
PAINTING EXISTING BUILDING
-
-
-
14.43
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth
including necessary repairs to scratches etc. complete.
1281.257
-
11.46
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
1281.257
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
1281.257
-
115.91
14.54.1
Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give
even shade:One or more coats on old work
107.626
-
70.41
Lupsum for round off
-
-
-
Lupsum for round off
1
-
16864.24
PHC THUVVUR
SETTING UP OF OP COUNTER
-
-
-
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :
733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,
paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium
(minimum thickness of powder coating 50 micron)
61.473
-
527.73
od88094/2018_2019
Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural
drawings and directions of Engineer - in- Charge.
6.36
-
923.51
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM
rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -
in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
7.62
-
1377.92
15.10.2
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually /
by mechanical means including stacking of serviceable and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-Charge:In cement mortar
2.381
-
1614.95
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
1.26
-
228.38
50.6.7.2
Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement
mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour
charges etc.
1.872
-
6828.11
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers
not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to
50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
2.07
-
427.2
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
0.594
-
6146.26
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
3.12
-
237.37
11.20.3
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement
slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20
mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary
cement
8.4
-
983.19
13.44.1
Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied
@ 3.84 kg/10 sqm)
3.12
-
80.7
10.28
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.,
including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the
same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary
accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the
floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for
payment purpose only weight of stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.)
80.353
-
648.37
PARTITIONS FOR INJECTION ROOM, ILR, COMPUTER ROOM & FEEDING ROOM
-
-
-
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :
733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,
paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium
(minimum thickness of powder coating 50 micron)
187.87
-
527.73
od88094/2018_2019
Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural
drawings and directions of Engineer - in- Charge.
34.11
-
923.51
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM
rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -
in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
22.74
-
1377.92
ADDITIONAL WORKS FOR LAB
-
-
-
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size
confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM
1:6 ( 1 cement : 6 coarse sand) etc complete
0.338
-
5867.83
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,
balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor
five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :
1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.3
-
10143.87
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
3.5
-
579.61
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
24
-
77.68
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
11.375
-
237.37
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,
approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area
of slab over 0.50 sqm
3.64
-
4273
11.36
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be
specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg
per sqm, including pointing in white cement mixed with pigment of matching shade complete.
6
-
1022.24
9.18.2
Providing and fixing Pre- laminated flat pressed 3 layer ( medium density) particle board or graded wood
particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I,
Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to
be painted with polyurethane primer ( fittings to be paid separately)25 mm thick
14.16
-
1790.49
CONVERT EXISTING TOILET TO DISABLE FRIENDLY
-
-
-
15.10.2
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually /
by mechanical means including stacking of serviceable and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-Charge:In cement mortar
0.435
-
1614.95
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
1.26
-
228.38
50.6.7.2
Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement
mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour
charges etc.
2.209
-
6828.11
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers
not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to
50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
2.07
-
427.2
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
0.594
-
6146.26
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
6.481
-
237.37
11.20.3
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement
slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20
mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement
8.4
-
983.19
13.44.1
Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied
@ 3.84 kg/10 sqm)
3.12
-
80.7
10.28
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.,
including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the
same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary
accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the
floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for
payment purpose only weight of stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.)
80.353
-
648.37
15.23.1
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres
lead.For thickness of tiles 10 mm to 25 mm
11.701
-
43.3
11.36
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be
specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg
per sqm, including pointing in white cement mixed with pigment of matching shade complete.
9.3
-
1022.24
11.40
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be
specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours,
shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :
4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
2.401
-
1236.69
17.3.1
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10
litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm
flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of
approved municipal design complete, including painting of fittings and brackets, cutting and making good
the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
1
-
6304.92
17.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste
of standard pattern, including painting of fittings and brackets, cutting and making good the walls
wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass
pillar taps
1
-
2875.8
18.15.2
Providing and fixing brass bib cock of approved quality :20 mm nominal bore
2
-
384.85
18.16.1
Providing and fixing brass stop cock of approved quality :15 mm nominal bore
2
-
356.99
SLIDING DOOR FOR TOILET
-
-
-
Lump-Sum
1
-
8000
WAITING SPACE NEAR FEEDING ROOM
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
0.365
-
228.38
4.1.3
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size)
0.365
-
7523.98
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
608.774
-
123.87
12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as
approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to
avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired
by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm)
with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of
purlins, rafters and trusses and including cutting to size and shape wherever required.
37.7
-
755.42
od88094/2018_2019
Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural
drawings and directions of Engineer - in- Charge.
5.8
-
923.51
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or
more coats on new work
31.778
-
107.6
2.1.1
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10
sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be
levelled and neatly dressed:All Kinds of soil
28.081
-
72.74
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
2.268
-
6146.26
11.20.3
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement
slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20
mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary
cement
30.24
-
983.19
CONSTRUCTION OF TOILET UNIT NEAR LAB
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
20.142
-
228.38
od88132/2018_2019
Dry rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete
1:6:12 ( 1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) including cost of through stone and bond stone.
14.081
-
3829.19
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not
exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m
and lift up to 1.5 m.
1.872
-
172.59
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size
confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM
1:6 ( 1 cement : 6 coarse sand) etc complete
4.377
-
5867.83
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,
balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor
five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :
1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
1.471
-
10143.87
5.36
Providing and placing in position precast reinforced cement concrete waffle units, square or rectangular
as per design and shape for floors and roofs in 1:11/2:3 ( 1 cement : 1 1/2 coarse sand : 3 graded stone
aggregate 10 mm nominal size), including flush or deep ruled pointing at joints in cement mortar 1:2 (1
cement : 2 Fine sand), making necessary holes of required sizes for carrying through service lines etc.,
providing steel hooks for lifting etc, form work in precasting, handling, hoisting, centering and erection
complete for all floor levels but excluding the cost of reinforcement .
0.631
-
24121.89
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,
girders bressumers and cantilevers
3.27
-
470.63
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
13.695
-
579.61
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
168.64
-
77.68
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
0.322
-
6146.26
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
82.915
-
237.37
10.5.2
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S.
gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming
coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece
3.361
-
3790.71
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :
733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,
paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium
(minimum thickness of powder coating 50 micron)
5.538
-
527.73
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM
rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -
in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0
mm thickness
0.721
-
1017.71
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be
specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours
White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand),
including grouting the joints with white cement and matching pigments etc., complete.
6.76
-
1128.81
11.36
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be
specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg
per sqm, including pointing in white cement mixed with pigment of matching shade complete.
16.201
-
1022.24
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
82.915
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
82.915
-
115.91
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat
and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and
making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat
and lid
2
-
4692.17
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching,
refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
10
-
436.82
50.18.9.7.1
Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling
& testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
10
-
279.49
50.18.8.2.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as
per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall
etc. 20 mm pipe 10 Kgf/ cm2
20
-
285.57
18.58.2.1
Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular
lid150 mm nominal size square 100 mm diameter of the inner hinged round grating
2
-
205.94
18.15.1
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
2
-
356.99
18.16.1
Providing and fixing brass stop cock of approved quality :15 mm nominal bore
2
-
356.99
PAINTING WORK FOR EXISTING BUILDING
-
-
-
14.46
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand
papering and preparing the surface smooth including necessary repairs to scratches etc. complete
1250.36
-
14.82
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
1250.36
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
1250.36
-
115.91
14.54.1
Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give
even shade:One or more coats on old work
166.321
-
70.41
SUUPPLYING 3 SEATER CHAIRS (16 Nos)
-
-
-
Lump-Sum
16
-
15000
ELECTRICAL MAINTENANCE
-
-
-
Lump-Sum
1
-
100000
SIGNAGES
-
-
-
Lump-Sum
1
-
30000
Lumpsum for round off
-
-
-
Lump-Sum
1
-
26151.05
PHC THRIPPANACHI
CONVERTING OLD VEHICLE SHED TO WAITING SPACE
-
-
-
15.28.1
Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50
metres lead of :G.S. Sheet
58.801
-
96.21
15.14.2
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height
including stacking the material within 50 metres lead:Of sectional area below 40 square centimeters
49.4
-
10.57
15.12.1
Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats,
architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
1
-
216.65
15.10.2
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually /
by mechanical means including stacking of serviceable and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-Charge:In cement mortar
0.193
-
1614.95
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
1.63
-
228.38
od102009/2018_2019
Dry rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete
1:6:12 ( 1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) including cost of
through stone and bond stone.
1.404
-
3829.19
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement
concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth
level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
0.79
-
5443.13
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers
not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to
50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
10.322
-
427.2
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
311.896
-
123.87
12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as
approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to
avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired
by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm)
with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of
purlins, rafters and trusses and including cutting to size and shape wherever required.
42.5
-
755.42
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size
confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM
1:6 ( 1 cement : 6 coarse sand) etc complete
3.757
-
5867.83
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,
balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor
five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :
1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.542
-
10143.87
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,
girders bressumers and cantilevers
1.3
-
470.63
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
4.9
-
579.61
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
54.2
-
77.68
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
2.64
-
6146.26
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
91.001
-
237.37
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)
with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and
shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
35.956
-
1536.38
11.20.2
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement
slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20
mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white
cement 50 % Grey cement
9.3
-
1205.88
10.3
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced
with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia
steel pulleys, complete with bolts, nuts,locking arrangement, stoppers, handles, including applying a
priming coat of approved steel primer .
4.2
-
7357.49
10.28
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.,
including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the
same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary
accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the
floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for
payment purpose only weight of stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.)
61.261
-
648.37
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
91.001
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
91.001
-
115.91
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or
more coats on new work
23.809
-
107.6
DISABLE FRIENDLY TOILET
-
-
-
15.3
Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal
of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
0.875
-
1996.37
15.10.2
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually /
by mechanical means including stacking of serviceable and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-Charge:In cement mortar
2.938
-
1614.95
50.6.7.2
Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement
mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour
charges etc.
3.721
-
6828.11
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,
balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor
five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :
1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.794
-
10143.87
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,
girders bressumers and cantilevers
0.75
-
470.63
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
8.033
-
579.61
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
0.164
-
6146.26
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
51.132
-
237.37
11.40
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be
specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours,
shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :
4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
3.63
-
1236.67
11.36
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be
specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg
per sqm, including pointing in white cement mixed with pigment of matching shade complete.
8.43
-
1022.24
17.3.1
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10
litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm
flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of
approved municipal design complete, including painting of fittings and brackets, cutting and making good
the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
1
-
6304.92
17.7.3
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste
of standard pattern, including painting of fittings and brackets, cutting and making good the walls
wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass
pillar taps
1
-
2875.8
50.18.9.14.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as
per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall
10
-
249.63
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching,
refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
15
-
436.82
18.15.1
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
2
-
356.99
18.16.1
Providing and fixing brass stop cock of approved quality :15 mm nominal bore
2
-
356.99
50.9.1.2
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or
dash fastener shall be paid for separately) using good quality Pincoda wood
0.025
-
112886.44
50.9.6.2
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float
glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary
screws. Using Pincoda wood 30 mm thick shutters
0.297
-
3536.43
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or
round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden
frames with rawl plugs screws etc
2.403
-
154.34
9.141
Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (±0.2mm), made
out of single piece extruded PVC profile, with mitred cut joints and with 2 nos of PVC bracket of size 190
mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical
door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM
rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC
solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100 mm long
anchor fasteners complete, all as per manufacturer's specification and direction of Engineer-in--charge.
5
-
843.47
9.142.2
35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded solid PVC (
±0.2 mm) thick, having styles & rails (except lock rail ) of size 95 mmx 35 mm x 5 mm, out of which 75
mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm
integrally extruded on the hinges side of the profile for better screw holding power, including reinforcing
with MS tube of size 40 mm x 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help
of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm
x 100 mm of cross section size 35 mm x 17 mm s 1 mm at each corner. Single piece extruded 5 mm thick
solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be
tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the
styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including
providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per
manufacturer's specification and direction of Engineer-in-charge.Decorative finish (wood grained finish)
1.435
-
4448.48
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
51.132
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
51.132
-
115.91
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or
more coats on new work
0.45
-
107.6
EXTENSION AND MAINTENANCE WORK FOR EXISTING ROOF
-
-
-
15.28.2
Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50
metres lead of :Asbestos Sheet
343.64
-
45.09
15.19
Dismantling steel work manually / by mechanical means in built up sections without dismembering and
stacking within 50 metres lead as per directions of Engineer -in-Charge.
3045.313
-
2.2
15.22
Extra for marking of structural steel work required to be re-erected.
3045.313
-
2.75
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
1748.577
-
123.87
12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as
approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to
avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired
by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm)
with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of
purlins, rafters and trusses and including cutting to size and shape wherever required.
426.44
-
755.42
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or
more coats on new work
76.56
-
107.6
VEHICLE SHED NEAR NEW BLOCK
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
3.302
-
228.38
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement
concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth
level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
3.916
-
5443.13
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers
not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to
50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
4.48
-
427.2
4.1.3
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size)
0.946
-
7523.98
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
603.042
-
123.87
12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as
approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to
avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired
by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm)
with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of
purlins, rafters and trusses and including cutting to size and shape wherever required.
44
-
755.42
od102657/2018_2019
Providing and fixing 15cm wide, Plain Square PVC gutter with iron brackets 40x3 mm size, bolts, nuts
and washers etc., including making necessary connections with rain water pipes complete.
8
-
527.18
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size
confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM
1:6 ( 1 cement : 6 coarse sand) etc complete
1.917
-
5867.83
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
27.158
-
237.37
10.25.2
Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including
cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural
steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
250.08
-
117.97
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
1.95
-
6146.26
11.20.2
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement
slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20
mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white
cement 50 % Grey cement
27.95
-
1205.88
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
27.158
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
27.158
-
115.91
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or
more coats on new work
41.32
-
107.6
PAINTING WORK FOR EXISTING BUILDINGS
-
-
-
14.43
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth
including necessary repairs to scratches etc. complete.
1547.33
-
11.46
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
1547.33
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
1547.33
-
115.91
14.54.1
Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give
even shade:One or more coats on old work
141.487
-
70.41
SUPPLYING 3 SEATED CHAIRS (10 Nos)
-
-
-
Lump-Sum
10
-
15000
ELECTRICAL MAINTENANCE AND PROVISTION FOR AC 1T
-
-
-
Lump-Sum
1
-
75000
Lumpsum for round off
-
-
-
Lumpsum
1
-
32807.24
PHC THRIKKALANGODE
CONSTRUCTION OF BUILDING
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
108.811
-
228.38
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
12.997
-
6146.26
od87274/2018_2019
Dry rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete
1:6:12 ( 1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) including cost of
through stone and bond stone.
29.16
-
3829.19
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement
concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth
level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
16.406
-
5443.13
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers
not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to
50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
54.716
-
427.2
5.1.2
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of
centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse
sand :3 graded stone aggregate 20 mm nominal size
25.628
-
8530.57
5.2.2
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth
and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level
excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand :
3 graded stone aggregate 20 mm nominal size)
7.988
-
9807.61
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,
balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor
five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :
1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
33.07
-
10143.87
5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of
columns, etc for mass concrete
27.84
-
266.2
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,
girders bressumers and cantilevers
136.472
-
470.63
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
156.724
-
579.61
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
4862.26
-
77.68
50.6.7.2
Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement
mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour
charges etc.
40.597
-
6828.11
50.6.3.2
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available
size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in :
CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
3.67
-
6541.88
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
958.483
-
237.37
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be
specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours
White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand),
including grouting the joints with white cement and matching pigments etc., complete.
148.451
-
1128.81
11.36
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be
specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg
per sqm, including pointing in white cement mixed with pigment of matching shade complete.
27.601
-
1022.24
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,
approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area
of slab over 0.50 sqm
6.16
-
4273
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or
round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden
frames with rawl plugs screws etc
372.9
-
154.34
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :
733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,
paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium
(minimum thickness of powder coating 50 micron)
285.325
-
527.73
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM
rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -
in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
41.61
-
1377.92
od88500/2018_2019
Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural
drawings and directions of Engineer - in- Charge.
25.201
-
923.51
50.9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
0.125
-
101851.99
50.9.3.1
Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows,
30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with
necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f
Engineer in- charge. using Anjili/ Jack wood
6.203
-
2608.38
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
806.383
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
806.383
-
115.91
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or
more coats on new work
66.691
-
107.6
17.1.1
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or
S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device
(handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making
good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440
mm with integral type foot rests
2
-
4795.79
17.11.2
Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber
plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete,
including painting of fittings and brackets, cutting and making good the wall wherever required:Size
600x450x200 mm
1
-
4407.72
18.58.2.1
Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular
lid150 mm nominal size square 100 mm diameter of the inner hinged round grating
2
-
205.94
50.18.9.7.1
Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling
& testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
15
-
279.49
50.18.9.6.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching,
refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2
15
-
229.44
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching,
refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
15
-
436.82
50.18.9.12.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wall
30
-
183.68
50.18.9.14.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as
per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall
30
-
249.63
18.15.1
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
4
-
356.99
18.16.1
Providing and fixing brass stop cock of approved quality :15 mm nominal bore
2
-
356.99
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked,
with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank.
1000
-
9.95
ELECTRIFICATION FOR NEW BUILDING
-
-
-
Lupsum
1
-
250000
SUPPLYING 3 SEATER CHAIRS (4 Nos)
-
-
-
SUPPLYING 3 SEATER CHAIRS-lupsum
3
-
20000
SIGNAGES
-
-
-
Lump-Sum
1
-
20000
Lumpsum for round off
-
-
-
Lumpsum
1
-
4626.44
PARTITIONS FOR OP ROOM, ILR, INJECTION ROOM
-
-
-
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :
733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,
paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium
(minimum thickness of powder coating 50 micron)
152.483
-
527.73
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM
rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -
in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
2.4
-
1377.92
od88479/2018_2019
Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural
drawings and directions of Engineer - in- Charge.
36.721
-
923.51
SETTING UP OF LAB
-
-
-
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size
confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM
1:6 ( 1 cement : 6 coarse sand) etc complete
0.473
-
5867.83
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,
balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor
five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :
1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.42
-
10143.87
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
4.9
-
579.61
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
33.6
-
77.68
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
16.188
-
237.37
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
16.188
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
16.188
-
115.91
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area
of slab over 0.50 sqm
4.9
-
4273
11.36
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be
specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg
per sqm, including pointing in white cement mixed with pigment of matching shade complete.
25.47
-
1022.24
17.11.2
Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber
plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete,
including painting of fittings and brackets, cutting and making good the wall wherever required:Size
600x450x200 mm
2
-
4407.72
17.7.2
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste
of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass
pillar tap
2
-
2773.27
50.18.8.2.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as
per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall
etc. 20 mm pipe 10 Kgf/ cm2
30
-
285.57
50.18.9.7.1
Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling
& testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
25
-
279.49
18.15.2
Providing and fixing brass bib cock of approved quality :20 mm nominal bore
3
-
384.85
18.16.1
Providing and fixing brass stop cock of approved quality :15 mm nominal bore
3
-
356.99
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :
733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,
paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium
(minimum thickness of powder coating 50 micron)
124.517
-
527.73
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM
rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
2.4
-
1377.92
od88479/2018_2019
Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural
drawings and directions of Engineer - in- Charge.
34.56
-
923.51
WAITING SPACE AND TOILET FOR NEW BLOCK
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
9.432
-
228.38
od88492/2018_2019
Dry rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete
1:6:12 ( 1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) including cost of
through stone and bond stone.
9.432
-
3829.19
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement
concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth
level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
5.307
-
5443.13
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers
not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to
50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
19.44
-
427.2
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size
confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM
1:6 ( 1 cement : 6 coarse sand) etc complete
9.19
-
5867.83
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,
balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor
five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :
1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.322
-
10143.87
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,
girders bressumers and cantilevers
4.29
-
470.63
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
28.98
-
77.68
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
120.481
-
237.37
4.1.3
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size)
0.608
-
7523.98
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
1051.021
-
123.87
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
120.481
-
50.71
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
120.481
-
115.91
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or
more coats on new work
78.818
-
107.6
12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as
approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to
avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired
by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm)
with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of
purlins, rafters and trusses and including cutting to size and shape wherever required.
66.56
-
755.42
od88478/2018_2019
Providing and fixing 15cm wide, Plain Square PVC gutter with iron brackets 40x3 mm size, bolts, nuts
and washers etc., including making necessary connections with rain water pipes complete.
12.8
-
527.18
10.25.2
Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including
cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural
steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
766.275
-
117.97
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
3.24
-
6146.26
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)
with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and
shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints
with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
49.5
-
1536.38
11.36
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be
specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg
per sqm, including pointing in white cement mixed with pigment of matching shade complete.
18.076
-
1022.24
17.1.1
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or
S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device
(handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making
good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440
mm with integral type foot rests
2
-
4795.79
17.7.2
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste
of standard pattern, including painting of fittings and brackets, cutting and making good the walls
wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass
pillar tap
1
-
2773.27
18.15.1
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
4
-
356.99
18.16.1
Providing and fixing brass stop cock of approved quality :15 mm nominal bore
3
-
356.99
50.18.9.7.1
Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling
& testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
25
-
279.49
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching,
refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
25
-
436.82
50.18.9.12.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as
per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wall
20
-
183.68
50.18.9.14.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as
per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall
30
-
249.63
18.58.2.1
Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating
2
-
205.94
9.145
Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53
mm, having wall thickness 2.0 mm (± 0.2 mm) Both vertical sides of the frame reinforced with PVC profile
of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm ) and 75 mmx 200 mm long, including
reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile
to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long
stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash
fastener, all complete as per manufacturer's specification and direction of engineer-in-charge.
11.6
-
648.3
9.146
Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow
extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2
mm ( 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by
inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm
x 30 mm having wall thickness 2 mm ( 0.2 mm). Styles, rails and reinforcements to be fusion welded
together. Only hinges side vertical style to be reinforced with PVC profile reinforcement in full length,
Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm ( 0.2 mm) to be
welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails,
providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6
mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers
complete, all as per manufacturer's specification and direction of engineer-in-charge.
3.361
-
4392.14
STAIR CASE HANDRAIL
-
-
-
10.28
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.,
including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the
same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary
accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the
floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for
payment purpose only weight of stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.)
103.41
-
648.37
FILE SHELF TO IMMUNIZATION ROOM
-
-
-
9.18.1
Providing and fixing Pre- laminated flat pressed 3 layer ( medium density) particle board or graded wood
particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I,
Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to
be painted with polyurethane primer ( fittings to be paid separately)18 mm thick
7.74
-
1359.46
9.59.3
Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete:100mm
12
-
208.48
9.79.1
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of
approved quality including necessary screws etc. complete.40 mm
6
-
224.88
9.81.2
Providing and fixing bright finished brass handles with screws etc. complete:100 mm
6
-
218.5
ELECTRIFICATION FOR WAITING SPACE AND PROVISTION FOR AC 1T
-
-
-
Lump-Sum Total
1
-
150000
SUPPLYING 3 SEATED CHAIRS (15 Nos)
-
-
-
Lump-Sum Total
15
-
15000
SIGNAGES
-
-
-
Lump-Sum Total
1
-
30000
Lump-Sum for round off
-
-
-
Lump-Sum for round off
1
-
38162.22
Centage charge to Nirmithi Kendra @ 8% ( 8% of Total estimate cost )
1
-
936000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements