District Nirmithi Kendra Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
District Nirmithi Kendra Tender
Civil And Construction
Building Construction
Eprocure
Opening Date22 Nov 2024
Closing Soon30 Nov 2024
Tender Amount₹ 79,32,068
Costs
EMD
₹ 50,000Document Cost
₹ 2,950Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_DNKML_704382_2Tender No
DNKM/E-TENDER/P1/007 S /2023-24Tender Authority
District Nirmithi Kendra ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
1
5825
5825.06
50.18.8.3.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
10kgf /cm2
5
395
1977.35
50.18.9.7.1
Providing and fixing PVC pipes includings of pipes with one step PVC solvent
cement, trenching refilling & testing of joints complete as per direction of Engineer in
Charge. 63 mm dia 6Kgf/cm2
5
325
1627.6
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of Joints complete as per direction of
engineer in charge.110 mm dia 6Kgf/cm2
3
493
1480.29
18.54.2 Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal
bore, 122 mm long, weighing not less than 99 gms
2
179
358.84
RENOVATION OF HOUSE - 2.CHANGAN M (362/7)
-
-
-
15.7.4
Demolishing brick work manually / by mechanical means including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead as
per direction of Engineer-in-Charge.In cement mortar
0.42
1627
677.04
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting
out the excavated soil and disposal of surplus excavated soil as directed, within a lead
of 50 m.All kinds of soil
1.33
279
372.09
50.6.7.1
Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size
in cement mortar 1:6 for foundation and basement including all cost of materials,
labour charges etc.
2.26
6746
15253.14
50.6.7.2
Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size
in cement mortar 1:6 for super structure above plinth level up to floor two level
including all cost of materials, labour charges etc.
1.63
7449
12127.02
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up
to 15sup0/sup landings, balconies, shelves, chajjas, lintels, bands, plain window
sills, staircases and spiral stair cases up to floor five level excluding the cost of
centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse
sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.28
10810
3005.38
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
2.22
611
1356.91
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically Treated
bars of grade Fe-500D or more
23.63
92
2185.07
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of
site Engineer-in-charge
1.2
494
592.06
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
0.2
6410
1282.07
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
41.54
295
24546.82
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
40.18
66
2670.36
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer), of 1st quality conforming to IS:
15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints
with white cement and matching pigments etc., complete.
4.72
1205
5688.02
RENOVATION OF HOUSE - 3.KARTHIAYINI TP (384/7)
-
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
1.09
6410
7012.93
4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work
for:Foundations, footings, bases for columns
9.72
315
3065.79
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
516.86
143
74066.18
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
31.21
134
4199.48
OD29248/2023-2024
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required.
63.45
563
35765
12.51.1 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+
0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600
mm)
7.7
460
3549.39
RENOVATION OF HOUSE - 4.CHAKKAN TP (383/7)
-
-
-
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
78.16
166
12979.25
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
736.25
143
105504.63
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
58.01
134
7806.36
OD29255/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
78.16
165
12944.08
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
15.63
359
5614.08
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
18.59
79
1485.92
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
9.9
295
2925.05
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
9.9
66
657.95
RENOVATION OF HOUSE - 5. GOPI TP (381/7)
-
-
-
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
65.31
166
10845.71
15.14.1
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span
and 5 metres height including stacking the material within 50 metres lead:Of sectional
area 40 square centimetres and above
0.04
3704
151.89
4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
0.18
6410
1166.69
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
800.66
143
114733.86
OD29256/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
65.31
165
10816.32
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
6.53
359
2345.54
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
17.92
79
1432.84
OD29257/2023-2024
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required.
14.28
563
8049.49
RENOVATION OF HOUSE - 6. GOPALAN K (393/7)
-
-
-
15.12.1
Dismantling doors, windows and clerestory windows (steel or wood ) shutter including
chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of
area 3 sq. metres and below
7
303
2127.37
15.14.1
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span
and 5 metres height including stacking the material within 50 metres lead:Of sectional
area 40 square centimetres and above
0.11
3704
418.63
50.9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners
of required dia & length (hold fast lugs or dash fastener shall be paid for separately),
using good quality Anjili wood /jack wood
0.11
102838
11620.74
50.9.3.1
Providing and fixing paneled or paneled and glazed shutters for doors, windows and
clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt
hinges bright finished of required size with necessary screws, excluding paneling
which will be paid for separately, all complete as per direction 0f Engineer in- charge.
using Anjili/ Jack wood
5.66
2839
16072.43
50.9.6.1
Providing and fixing glazed shutters for doors, windows and clerestory windows using
4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright
finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm
thick shutters
1.23
3573
4377.24
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel primer
all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
23.5
203
4773.45
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
13.96
134
1878.46
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
38.56
1661
64057.59
RENOVATION OF HOUSE - 7. KOPPA M(ANOOP) (387/7)
-
-
-
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or
nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
0.8
6551
5267.66
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
132.38
295
39112.99
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
132.38
66
8797.97
RENOVATION OF HOUSE - 8. RAJAN KADAN (354/7)
-
-
-
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer), of 1st quality conforming to IS:
15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints
with white cement and matching pigments etc., complete.
50.1
1205
60375.01
RENOVATION OF HOUSE - 9. RAMANKUTTY K (351/7)
-
-
-
15.56
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster
including disposal of rubbish to the dumping ground within 50 metres lead.
63.77
43
2754.91
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
72.8
1661
120955.95
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer), of 1st quality conforming to IS:
15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints
with white cement and matching pigments etc., complete.
9.99
1205
12038.85
RENOVATION OF HOUSE - 10. PRAMEELA EK (350A/7)
-
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
123.18
295
36394.17
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
65.74
1661
109222.72
RENOVATION OF HOUSE - 11. SURESH BABU NK (385/7)
-
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
130.56
295
38575.26
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
130.56
66
8677.02
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer), of 1st quality conforming to IS:
15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints
with white cement and matching pigments etc., complete.
34.1
1205
41097.18
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
1
5825
5825.06
18.54.2
Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal
bore, 122 mm long, weighing not less than 99 gms
2
179
358.84
50.18.8.3.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
10kgf /cm2
5
395
1977.35
50.18.9.7.1
Providing and fixing PVC pipes includings of pipes with one step PVC solvent
cement, trenching refilling & testing of joints complete as per direction of Engineer in
Charge. 63 mm dia 6Kgf/cm2
5
325
1627.6
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of Joints complete as per direction of
engineer in charge.110 mm dia 6Kgf/cm2
3
493
1480.29
9.120.1
Providing and fixing factory made panel PVC door shutter consisting of frame made
out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and
15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of
approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded
PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be
flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and
5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree
on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which
75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top,
bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick,
20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail.
paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded
/sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC
sheet beading on inner side, and joined together with solvent cement adhesive. An
additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of
the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer
-in-charge, manufacture's specification & drawing.30 mm thick plain PVC door
shutters
1.68
2683
4507.81
RENOVATION OF HOUSE - 12. AYYAPPAN KADAN(LATE)(394/7)
-
-
-
15.12.1
Dismantling doors, windows and clerestory windows (steel or wood ) shutter including
chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of
area 3 sq. metres and below
3
303
911.73
15.14.1
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span
and 5 metres height including stacking the material within 50 metres lead:Of sectional
area 40 square centimetres and above
0.13
3704
474.2
15.56
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster
including disposal of rubbish to the dumping ground within 50 metres lead.
80.77
43
3489.35
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
80.77
1661
134199.45
RENOVATION OF HOUSE - 13. NADI NK (405A/7)
-
-
-
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or
nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
0.85
6551
5549.39
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
135.76
295
40111.35
11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer), of 1st quality conforming to IS:
15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints
with white cement and matching pigments etc., complete.
13.61
1205
16401.27
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
46.86
1661
77849.37
RENOVATION OF HOUSE - 14. CHERICHI NK (403/7)
-
-
-
15.56
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster
including disposal of rubbish to the dumping ground within 50 metres lead.
53.66
43
2317.9
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
35.83
295
10587.22
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
35.83
66
2381.46
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
53.66
1661
89145.64
50.9.3.1 Providing and fixing paneled or paneled and glazed shutters for doors, windows and
clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt
hinges bright finished of required size with necessary screws, excluding paneling
which will be paid for separately, all complete as per direction 0f Engineer in- charge.
using Anjili/ Jack wood
2.78
2839
7878.64
RENOVATION OF HOUSE - 15. KARTHIAYINI NK (400/7)
-
-
-
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or
nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
0.49
6551
3184.18
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
162.14
295
47906.18
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
162.14
66
10775.89
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
0.41
6410
2641.07
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
18.26
1661
30343.24
RENOVATION OF HOUSE - 16. KADUNGAN M (439/7)
-
-
-
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or
nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
0.97
6551
6381.47
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
149.24
295
44094.75
15.56
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster
including disposal of rubbish to the dumping ground within 50 metres lead.
46.3
43
2000.2
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
58.59
1661
97346.6
RENOVATION OF HOUSE - 17. GOPALAKRISHNAN M (442A/7)
-
-
-
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth
with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
0.14
5848
789.61
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
215.93
295
63799.56
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
51.01
1661
84751.07
RENOVATION OF HOUSE - 18. DILEEP M (THAMI)(392/7)
-
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
1.09
6410
7012.93
4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work
for:Foundations, footings, bases for columns
9.72
315
3065.79
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
550.62
143
78903.99
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
33.91
134
4563.47
OD29259/2023-2024
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required.
66.36
563
37406.47
12.51.1
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+
0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600
mm)
7.9
460
3641.58
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer), of 1st quality conforming to IS:
15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints
with white cement and matching pigments etc., complete.
10.56
1205
12725.75
RENOVATION OF HOUSE - 19. VELAYUDHAN TP (390/7)
-
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
1.09
6410
7012.93
4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work
for:Foundations, footings, bases for columns
9.72
315
3065.79
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
550.62
143
78903.99
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
33.91
134
4563.47
OD29260/2023-2024
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required.
66.36
563
37406.47
12.51.1
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+
0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600
mm)
7.9
460
3641.58
RENOVATION OF HOUSE - 20. VILASINI M (386B/7)
-
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
1.09
6410
7012.93
4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work
for:Foundations, footings, bases for columns
9.72
315
3065.79
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
569.47
143
81605.34
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
35.39
134
4762.08
OD29260/2023-2024
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required.
72.23
563
40715.33
12.51.1
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+
0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600
mm)
8.55
460
3941.21
9.120.1
Providing and fixing factory made panel PVC door shutter consisting of frame made
out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and
15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of
approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded
PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be
flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and
5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree
on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which
75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top,
bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick,
20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail.
paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded
/sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC
sheet beading on inner side, and joined together with solvent cement adhesive. An
additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of
the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer
-in-charge, manufacture's specification & drawing.30 mm thick plain PVC door
shutters
bathroom
1.26
2683
3380.86
RENOVATION OF HOUSE - 21. VELAYUDHAN K (348/7)
-
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
1.09
6410
7012.93
4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work
for:Foundations, footings, bases for columns
9.72
315
3065.79
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
599.83
143
85956.21
OD29260/2023-2024
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required.
85
563
47913.65
12.51.1
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+
0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600
mm)
8.5
460
3918.16
RENOVATION OF HOUSE - 22. GOPALAN TP (/7)
-
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
0.3
6410
1903.88
4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work
for:Foundations, footings, bases for columns
8.91
315
2810.3
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
643.22
143
92173.28
OD29260/2023-2024
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required.
84.48
563
47619.97
12.51.1
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+
0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600
mm)
9.75
460
4494.36
RENOVATION OF HOUSE - 23. SIVADASAN VK (437/7)
-
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
1.09
6410
7012.93
4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work
for:Foundations, footings, bases for columns
9.72
315
3065.79
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
618.19
143
88586.05
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
39.27
134
5283.77
OD29260/2023-2024
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required.
64.02
563
36087.43
12.51.1
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+
0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600
mm)
9.7
460
4471.31
RENOVATION OF HOUSE - 24. VINOD K (358/7)
-
-
-
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
37.16
166
6170.46
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
350.44
143
50218.2
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
27.61
134
3715.07
OD29266/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
37.16
165
6153.74
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
7.43
359
2669.13
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
9.33
79
746.16
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer), of 1st quality conforming to IS:
15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints
with white cement and matching pigments etc., complete.
4.4
1205
5302.4
RENOVATION OF HOUSE - 25. UNNIYAMMA (Late)(352/7)- upper and lower
front roof only
-
-
-
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
105.68
166
17549.39
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
735.8
143
105440
OD29266/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
105.68
165
17501.83
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
10.57
359
3796.11
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
24.96
79
1995.62
RENOVATION OF HOUSE - 26. KOTHAKUTTY K (350/7)
-
-
-
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
51.95
166
8626.98
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
510.64
143
73174.71
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
40.2
134
5408.64
OD29266/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
51.95
165
8603.61
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
10.39
359
3731.46
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
17.67
79
1412.38
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer), of 1st quality conforming to IS:
15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints
with white cement and matching pigments etc., complete.
37.2
1205
44829.35
RENOVATION OF HOUSE - 27. KUNJAMMA K (349/7)
-
-
-
15.23.2
Dismantling tile work in floors and roofs laid in cement mortar including stacking
material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm
8.2
94
777.93
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
64.06
166
10638.14
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
647.02
143
92717.82
OD29266/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
64.06
165
10609.31
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
12.81
359
4601.66
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
16.76
79
1339.95
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
1
5825
5825.06
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer), of 1st quality conforming to IS:
15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints
with white cement and matching pigments etc., complete.
8.2
1205
9881.74
RENOVATION OF HOUSE - 28. RAJAN M (392/7)
-
-
-
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
56.21
166
9334.9
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting
out the excavated soil and disposal of surplus excavated soil as directed, within a lead
of 50 m.All kinds of soil
2.2
279
613.45
50.6.7.1
Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size
in cement mortar 1:6 for foundation and basement including all cost of materials,
labour charges etc.
3.43
6746
23146.18
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
1.5
243
364.59
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
0.3
6410
1948.75
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
642.68
143
92096.04
OD29266/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
56.21
165
9309.6
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
11.24
359
4037.81
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
18.9
79
1510.87
OD29342/2023-2024
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required.
12.04
563
6786.83
RENOVATION OF HOUSE - 29. DIVAKARAN M (389/7)
-
-
-
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
54.56
166
9060.23
15.56
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster
including disposal of rubbish to the dumping ground within 50 metres lead.
26.51
43
1145.02
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
549.7
143
78772.15
OD29266/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
54.56
165
9035.68
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
10.91
359
3918.94
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
18.7
79
1494.88
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
26.51
1661
44037
RENOVATION OF HOUSE - 30. CHELLI NK (/7)
-
-
-
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
72.67
166
12067.91
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
688.49
143
98660.04
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
54.24
134
7298.8
OD29266/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
72.67
165
12035.21
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
14.54
359
5221.9
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
19.23
79
1537.25
RENOVATION OF HOUSE - 31. RAJAN NK (483/7)
-
-
-
15.56
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster
including disposal of rubbish to the dumping ground within 50 metres lead.
5.6
43
241.92
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
78.4
166
13019.1
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
751.62
143
107706.72
OD29266/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
78.4
165
12983.82
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
11.76
359
4223.49
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
15.08
79
1205.5
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
5.6
1661
9304.18
RENOVATION OF HOUSE - 32. CHANDHRAN VK (438/7)
-
-
-
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
80.56
166
13377.63
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
783.4
143
112261.36
OD29266/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
80.56
165
13341.38
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
12.09
359
4340.21
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
21.61
79
1727.5
RENOVATION OF HOUSE - 33. VELAYUDHAN K (/7)
-
-
-
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
40.88
166
6789.03
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or
nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
1.17
6551
7665.63
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
16
295
4727.36
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
468.9
143
67193.23
10.25.2
Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing
in position and applying a priming coat of approved steel primer using structural steel
etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and
similar works
136.32
145
19771.27
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
42.8
134
5759.71
OD29266/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
40.88
165
6770.63
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
8.2
359
2944.95
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer), of 1st quality conforming to IS:
15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints
with white cement and matching pigments etc., complete.
9.98
1205
12026.8
RENOVATION OF HOUSE - 34. CHANDHRAN NK (357A/7)
-
-
-
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
43.99
166
7304.81
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
467.9
143
67050.21
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
37.07
134
4988.14
OD29266/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
43.99
165
7285.02
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
11
359
3950.54
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
1
5825
5825.06
18.54.2
Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal
bore, 122 mm long, weighing not less than 99 gms
2
179
358.84
50.18.8.3.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
10kgf /cm2
10
395
3954.7
50.18.9.7.1
Providing and fixing PVC pipes includings of pipes with one step PVC solvent
cement, trenching refilling & testing of joints complete as per direction of Engineer in
Charge. 63 mm dia 6Kgf/cm2
10
325
3255.2
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of Joints complete as per direction of
engineer in charge.110 mm dia 6Kgf/cm2
12
493
5921.16
9.120.1 Providing and fixing factory made panel PVC door shutter consisting of frame made
out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and
15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of
approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded
PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be
flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and
5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree
on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which
75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top,
bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick,
20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail.
paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded
/sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC
sheet beading on inner side, and joined together with solvent cement adhesive. An
additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of
the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer
-in-charge, manufacture's specification & drawing.30 mm thick plain PVC door
shutters
1.68
2683
4507.81
RENOVATION OF HOUSE - 35. PANKAJAM TP (388/7)
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting
out the excavated soil and disposal of surplus excavated soil as directed, within a lead
of 50 m.All kinds of soil
2.06
279
574.06
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth
with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
3.26
5848
19055.94
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of
site Engineer-in-charge
1.39
494
685.54
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
0.72
6410
4609.05
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
62.52
295
18472.16
13.37.1
White washing with lime to give an even shade:New work (three or more coats)
114.66
31
3623.26
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
206.86
143
29642.89
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
14.23
134
1914.65
OD29351/2023-2024
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required.
30.75
563
17333.47
9.120.1
Providing and fixing factory made panel PVC door shutter consisting of frame made
out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and
15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of
approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded
PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be
flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and
5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree
on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which
75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top,
bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick,
20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail.
paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded
/sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC
sheet beading on inner side, and joined together with solvent cement adhesive. An
additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of
the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer
-in-charge, manufacture's specification & drawing.30 mm thick plain PVC door
shutters
1.68
2683
4507.81
RENOVATION OF HOUSE - 36. PREMALATHA VK (436/7)
-
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
0.55
6410
3506.47
4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work
for:Foundations, footings, bases for columns
4.86
315
1532.89
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
41.99
295
12406.37
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
385.74
143
55276.54
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
26.23
134
3528.97
OD29351/2023-2024
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required.
47.32
563
26673.81
12.51.1
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+
0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600
mm)
8.45
460
3895.11
12.7.1
Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter
with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making
necessary connections with rain water pipes complete.0.80 mm thick with zinc coating
not less than 275 gm/m2
16.9
847
14315.14
RENOVATION OF HOUSE - 37. BHASKARAN VK (441/7)
-
-
-
15.12.1
Dismantling doors, windows and clerestory windows (steel or wood ) shutter including
chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of
area 3 sq. metres and below
2
303
607.82
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
36.37
166
6040.1
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
23.08
295
6819.22
50.9.3.1
Providing and fixing paneled or paneled and glazed shutters for doors, windows and
clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt
hinges bright finished of required size with necessary screws, excluding paneling
which will be paid for separately, all complete as per direction 0f Engineer in- charge.
using Anjili/ Jack wood
1.26
2839
3577.33
50.9.6.1
Providing and fixing glazed shutters for doors, windows and clerestory windows using
4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright
finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm
thick shutters
0.41
3573
1447.17
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
308.57
143
44218.22
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
24.33
134
3273.58
OD29361/2023-2024
Labour charges fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness on steel frame work complete (steel frame work to be paid separately)
36.37
165
6023.73
12.48
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
9.1
359
3268.17
12.49
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
9.6
79
767.42
RENOVATION OF HOUSE - 38. MUNDI MANOOR (356/7)
-
-
-
15.12.1
Dismantling doors, windows and clerestory windows (steel or wood ) shutter including
chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of
area 3 sq. metres and below
4
303
1215.64
15.14.1
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span
and 5 metres height including stacking the material within 50 metres lead:Of sectional
area 40 square centimetres and above
0.12
3704
444.56
50.9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners
of required dia & length (hold fast lugs or dash fastener shall be paid for separately),
using good quality Anjili wood /jack wood
0.12
102838
12340.61
50.9.3.1
Providing and fixing paneled or paneled and glazed shutters for doors, windows and
clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt
hinges bright finished of required size with necessary screws, excluding paneling
which will be paid for separately, all complete as per direction 0f Engineer in- charge.
using Anjili/ Jack wood
1.89
2839
5365.99
50.9.6.1
Providing and fixing glazed shutters for doors, windows and clerestory windows using
4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright
finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm
thick shutters
2.25
3573
8039.84
CONSTRUCTION OF NEW TOILET - 1. GOPALAN TP (without plumbing and
sanitation)
-
-
-
15.7.4
Demolishing brick work manually / by mechanical means including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead as
per direction of Engineer-in-Charge.In cement mortar
0.38
1627
615.2
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting
out the excavated soil and disposal of surplus excavated soil as directed, within a lead
of 50 m.All kinds of soil
0.97
279
271.53
50.6.7.1
Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size
in cement mortar 1:6 for foundation and basement including all cost of materials,
labour charges etc.
1.43
6746
9633.56
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of
site Engineer-in-charge
0.9
494
445.16
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
0.17
6410
1083.35
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or
nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
1.61
6551
10554.98
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
15.79
143
2262.99
INTERNAL ROAD/FOOTPATH - 1. SMASANAM FOOTPATH
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting
out the excavated soil and disposal of surplus excavated soil as directed, within a lead
of 50 m.All kinds of soil
31.52
279
8803.72
60.7.1
DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry
with good quality blasted rubble including packing to compactness to lines and levels
cost and conveyance of all materials labour charges etc. complete as per direction of
Departmental officers at site
87.32
3284
286772.4
5.1.2 Providing and laying in position specified grade of reinforced cement concrete,
excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm
nominal size
4.64
8545
39686.97
5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations,
footings, bases of columns, etc for mass concrete
20.64
315
6510.06
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically Treated
bars of grade Fe-500D or more
394.74
92
36501.61
2.1.1
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in
width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and
lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil
62.4
102
6395.38
51.2.3
Filling with Quarry Muck Filling up low lying and water logged areas with local
material/ quarry muck, spreading in layers, leveling the top at site and consolidation by
ramming, etc complete for improving the CBR value of subgrade
9.36
843
7896.75
4.1.4
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse
sand : 4 graded stone aggregate 40 mm nominal size)
6.24
7396
46154.1
4.1.3
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand
(zone-III) : 4 graded stone aggregate 20 mm nominal size)
6.24
7516
46903.15
INTERNAL ROAD/FOOTPATH - 2 . COLONY ROAD
-
-
-
2.31
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and
saplings of girth up to 30 cm measured at a height of 1 m above ground level and
removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
1212
13
16822.56
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)
including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed
earth to be levelled and neatly dressed.All kinds of soil
287.67
201
57913.93
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
33.9
243
8245.16
15.9.1
Demolishing stone rubble masonry manually / by mechanical means including
stacking of serviceable material and disposal of unserviceable material within 50
metres lead as per direction of Engineer -in- Charges:In Lime Mortar
105.85
915
96859.1
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting
out the excavated soil and disposal of surplus excavated soil as directed, within a lead
of 50 m.All kinds of soil
159.68
279
44605.77
60.7.1
DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry
with good quality blasted rubble including packing to compactness to lines and levels
cost and conveyance of all materials labour charges etc. complete as per direction of
Departmental officers at site
559.02
3284
1835946.97
5.1.2
Providing and laying in position specified grade of reinforced cement concrete,
excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm
nominal size
42.53
8545
363412.7
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
164.6
611
100606.81
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically Treated
bars of grade Fe-500D or more
2764.13
92
255598.64
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%