Directorate Of Panchayat Tender

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

1.31:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

2.10.3:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

2.10.4:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.15.1:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.7:Supply and providing copper earth bus in the panel board

90.14.24.18:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.3 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

90.14.24.19:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.4 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

90.14.24.20:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD322894/2024-2025:Supply ,Installation ,testing and Commissioning of 7.5 HP vertical open well submersible Pump set at rated voltage 3ph 415 V,50Hz,supply with a maximum head of 174m , discharge 200 lpm at 120m head in the existing open well using suitable tools and plants. (Deccan make 7 DIM/ 9 or equivalent .)

OD322895/2024-2025:Supply ,Installation, testing and Commissioning of 10HP vertical open well submersible Pump set at rated voltage 3ph 415 V,50Hz,supply with a maximum head of 213m ,discharge 150 lpm at 180 m head in the existing open well using suitable tools and plants .Deccan make 10 DLM/11 or equivalent make .

OD333164/2024-2025:Supply, Installation Testing & Commissioning of 15HP-6 stage submersible open well vertical motor pump set (EKKI DECCAN 15DG 2M/16 or equivalent) with max head 314 m and discharge of 13500 LPH at 184m, 75mm outlet using suitable type tools & plants Including giving necessary connections etc as required.

OD290435/2024-2025:Supply and fixing 63A Bakelite fuse holder with necessary bolt and nuts etc. as required

OD323304/2024-2025: Supplyig and providing25*3 Brass bolt and nut with washer

OD323306/2024-2025:Supply and providing 25x6 mm brass nut bolt etc. as required

OD290427/2024-2025:Supply and fixing 50mm B class GI pipe as support for hanging submersible motor pump set in open well

OD290442/2024-2025:Supply and fixing clamp made with 50x6mm MS Flat for hanging delivery pipe of submersible motor pump set in existing GI pipe above the open well

OD347014/2024-2025:Supply and laying 50mm 80 sch ASTM pipe with suitable type solvent as required at site.

OD290444/2024-2025:Supply and fixing 12mm nylone rope

OD290451/2024-2025:Supply and fixing 12mm Stainless steel rope

OD290429/2024-2025:Supply and fixing pump controller suitable for 3 Phase 7.5 HP Open well submersible motor pump set complete with fully automatic star delta starter, single phasing preventer, ON OFF indication lamps, push buttons, volt meter and ammeter etc. in sheet steel enclosure duly wired in the existing panel board and giving connection etc. as required. LT LK make MU-G10 H FASD or equivalent

OD330378/2024-2025:Supply and fixing pump controller suitable for 3 phase 10HP , open well submersible motor pump set complete with full automatic star delta starter, single phasing preventor, ON OFF indication lamps , pushbuttons, voltmeter & ammeter etc in sheet steel enclosure duly wired in the existing panel board and giving connection etc as required . LT LK make MU - G15 FASD or equivalent

OD330554/2024-2025:Supply & fixing pump controller for 3 phase 15HP open well submersible motor pump set complete with fully automatic star delta starter, single phasing preventer, ON& OFF indication lamps, push buttons, volt meter & ammeter etc, in sheet steel enclosure duly wired in the existing panel board and giving connection etc. as required. LT LK make MU-G15 FASD or equivalent.

OD290436/2024-2025:supply and providing 5/7W LED bulb on existing lamp holder

OD290452/2024-2025:Supply and providing 200 mm plastic shade on the existing holder as required

OD290455/2024-2025:Supply and fixingRED,YELLOW,BLUE LED Indicator AC/DC as required

OD290456/2024-2025:Dismantling and removing the existing old motor pump set from the open well with all connected fittings & accessories , old damaged and rusted meter board , main switch , wiring materials etc ; handing over the same to Panchayath authorities on proper acknowledgement & make good the wall including Plastering and Painting.

OD290448/2024-2025:Supply and Fixing Aluminium anodised danger Board of size200*150mm with incription both English and Malayalam and cconventional sympols

OD290439/2024-2025:Supply and providing 2x25x3 mm G I strip as test joint on the existing watering pipe of earthing including bending and giving connections

OD290437/2024-2025:Supply & installation of dust and vermin proof, 3 Phase Sintex Meter Board size 650x350x170mm (6535)to fix KSEB meters, fuse units, CT inciuding necessary B&N, rubber bushes etc.as required including fixing it on wall, making good the damages colour washing etc. as required.

OD290446/2024-2025:Supply and providing 63 A 2 way neutral link on existing meter board using suitable nut , bolt etc. as required.

OD290443/2024-2025:Supply and fixing63A HRCfuse with HRC fuse link with connection in existing meter board

OD290445/2024-2025:Supply and providing suitable iron hook grouted on wall for binding the service wire.

OD290450/2024-2025:Charges for preparation and submission of application for availing single/three phase KSEB service connection with necessary sketch, test and completion report, etc, including necessary liaison work as required.

OD363402/2024-2025:Supply and providing 32A HRC fuse holder with suitable nut, bolt etc.