Directorate Of Panchayat Tender

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

OD334681/2024-2025:Laterites Stone Sliced Cladding -Providing and fixing dry cladding up to 10metre height with 20mm thick gang saw cut laterite sliced stone with(machine cut edge)of uniform color and size up to 30*15cm, fixed to existing plastered wall surface and sealing the joints with approved weather sealants as per architectural drawing and direction of engineer in charge (modified 7.40.1)

OD334680/2024-2025:Designing , fabricating ,testing installing and fixing in position curtain wall with Aluminum composite panel cladding with open grooves for linear as well as curvilinear portions of the building , for all height and all levels etc. .including ; a)structural analysis & amp ; design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design . b) providing ,fabricating and supplying and fixing panels of aluminum composite panel cladding in pan shape in metallic color of approved shade made out of 3mm thick aluminum composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each 0.5mm thick) . The aluminium composite panel cladding sheet shall be coil coated with Kynar 500 based PVDF / lumiflon based fluoropolymer resin coating of approved color and shade on face # 1 and polymer (service )coating on face # 2 as specified using stainless steel screws ,nut bolts ,washes cleats , weather silicone sealant ,backer rods etc . c)The fastening brackets of Aluminium alloy 6005 T5 /MS with hot dip Galvanized with Hot Dip Galvanized with serrations and serrated washes to arrest the wind load movement , fasteners ,SS 316 Pins and anchor boilt of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing the item includes cost of all material and amp ; labour component the cost of all mock ups at site cost of all samples of the individual components for testing in an approved laboratory ,field tests on the assembled working curtain wall with aluminium composite panel cladding ,cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation .Base frame work for ACP cladding is payable under the relevant aluminium items . The contractor shall provide curtain wall with aluminium composite panel cladding ,having all the performance characteristics all complete .as per the architecural drawings as per item description as specified, as per the approved shop drawings and as directed by the engineer in charge. However for the purpose of payment only the actual area on the external face of the curtain wall with aluminium composite panel cladding(including width of groove)shall be measured in sqm up to two decimal places.

OD334682/2024-2025:MULTI WOOD PANEL LETTER -Providing and installing letters 15 to 25cm height using multi wood panel 17mm average thickness ,design as per department

OD352602/2024-2025:Supplying, fabricating and erecting PVC door with frame in locally available best quality material including cost of all materials ,labour charges etc complete