Directorate Of Archaeology Tender

Providing and fixing 20mm dia 10 kgf/cm2 PVC pipes, fittings including fixing the pipes with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step solvent cement and testing of joints complete asper the direction of Engineer in charge.

Providing and fixing 32mm dia 6kgf/cm2 PVC pipes, fittings including fixing the pipes with clamps at 1.00m spacing.this includes jointing of pipes and fittings with one step solvent cement and testing of joints complete asper the direction of Engineer in charge.

Plastering with cement mortar 1:4 (1 cement : 4 coarse sand)12mm thick.

Providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections profile size 48x40 mm having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing to existing door frames 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing circular type 100 mm nominal dia PTMT grating of approved quality and colour.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore.

Providing and fixing white vitreous China flat back wash basin size 450x300 mm with C.I. brackets, single 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.

Supplying and fixing CP towel rod 60cm or nearest available length including cost of materials and labour charges etc. complete as per the direction of site Engineer-in-charge.

Supplying and fixing stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Providing and fixing rectangular shape 453x357 mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Supplying pressed clay tiles (Mangalore Tiles) 20mm thick including cost, conveyance etc.

Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement 20mm thick etc. complete.

Providing valley sheet with 20 gauge aluminium sheet fixing with spike / wire nails and PVC washers with necessary overlaps including all coat and labour charges etc. complete (gauge certificate of aluminium sheet should be obtained from the concerned authority).

Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gm/ m2.

Removing white or colour wash by scrapping and sand papering and preparingthe surface smooth including necessary repairs to scratches etc. complete.

Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats.

Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade : One or more coats on old work.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing of 80x60cm rectangular retro-reflectorised cautionary, mandatory and informatory sign with 7 years warranty manufactured asper IRC:67 made of type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2mm thick aluminium composite material sheeting 4mm thick with suitable back supporting frame of MS angle 25x25x3mm and supported GI pipe pole 50mm NB confirming to IS:1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45x45x60cm, 60 cm below ground level including painting all exposed surface with two coats of epoxy paint over primer and asper approved drawing and clause 801 including lettering symbols etc.