Department Of Homeopathy Tender

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface including cost and coveyance of all materials, labour charges, hire charges of all machinery/tools and plants, scaffolding etc complete as directed by the officers concerned.

Wall painting with Anti fungal acrylic emulsion paint of approved brand and manufacture to give an even shade: including cost and coveyance of all materials, labour charges, hire charges of all machinery/tools and plants, scaffolding etc complete as directed by the officers concerned. Two or more coat on new work

Providing and fixing powdercoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including cost and coveyance of all materials, labour charges, hire charges of all machinery/tools and plants, scaffolding etc complete as directed by the officers cocerned.

Supplying and fixing OD 150mm PVC gutter as per I S 12818 to take the rain water including all specials, fixing the pipe with the clamps, fittings, including cost and conveyance of all materials, labour charges, hire charges of all tools and plants, scaffolding etc complete as directed by the officers concerned.

Providing and fixing rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including cost and conveyance of materials, labour charges, hire charges of all machinery, tools & plants etc complete as directed by the officers concerned.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost and conveyance of all materials, labour charges, hire charges of all tools and plants, scaffolding etc complete as directed by the officers concerned.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. including cost and conveyance of all materials, labour charges, hire charges of all tools and plants, scaffolding etc complete as directed by the officers concerned. Two or more coats

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing and paneling to be paid for separately): For fixed portion and Fixing glazing (Departmentally provided) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item): including cost and conveyance of all materials, labour charges, hire charges of all tools and plants etc complete as directed by the officers concerned. With float glass panes of 4.0 mm thickness

Supplying and installation of 450 mm dia wind driven turbine ventilator including cost and conveyance of all materials, labour charges, hire charges of all tools and plants, scaffolding etc complete as directed by the officers concerned, over the roof as per the direction of officers concerned. 450 mm dia wind driven turbine ventilator