Department Of Electronics And Information Technology Tender

Painting with Synthetic enamel paint of approved quality two or more coats on old/new surface of inside and outside doors, Ventilators, Shelves, Ceiling, hand rails etc , after scrapping and cleaning the surface.

Providing and fixing aluminium work for doors, windows, ventilators and partitions in all floors with extruded built up standard tubular and other sections of approved make conforming to I.S.733 and 1285 anodized transparent or powder coated to required shade according to I.S. 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections (thickness should be 1.5mm) shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, clips and paneling to be paid for separately).

Providing and fixing 9mm thick prelaminated particle board of approved brand and colour conforming to B. I.S. (both sides pre-laminated) for shutters of doors, windows & ventilators and partitions etc in all floors including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / Neoprene gasket required.

Providing and fixing plain glass as approved for aluminium partitions, doors, windows, ventilators etc fixing with PVC/Neopreme gasket etc. Complete. 4 mm thick

Providing and fixing 18 mm thick gangsaw cut granite slab, mirror polished of required size, approved shade, colour and texture laid over the moisture resisting plywood of 19mm thick with necessary GI framework(epoxy painted) to support the granite slab, epoxy touch-ups, including rubbing, curing, moulding and polishing edges to high gloss finish etc. complete. Basic rate of granite is Rs.240/Sqft.

Supply and fixing etch film (Garware or equivalent ) of approved strip pattern for glazing panels of aluminium partitions ,doors, windows etc.

Inverter Split Unit

Supply, installation, testing and commissioning of split air-cooled air-conditioners, each complete with rotary / swing/ scroll compressor, air cooled condensor (high efficiency inner grooved copper tubes with aluminium fins),GSS casing, filters, cooling coils, fan motors,insulated copper refrigerant piping (Min 10 Mtr) , control wiring, refrigerant controls and accessories, including MICRO-PROCESSOR CONTROL with indication lamps for the operation of the system with thermostat fixed in the respective rooms to adjust the temperature according to the equipments requirements with Micro- processor control panel for each machine. Tenderes to elaborate the features of Micro- processor panel. GI painted frame works for outdoor units & making good of civil works. Control cabling of units and stabilizer to be included. Refrigerant shall be R410A/R32. 1 TR Hi-Wall split unit.

Supply and installation of approved portable fire extinguisher- ABC dry powder form charge with capacity 4Kg, meeting all standard specification in IS 15683:2006. Make: Minimax, Ceasefire or approved equivalent.

Supply and installation of stainless steel Sink of size (24''x18''x 8'') of approved color and design including the rate of related plumbing works to the existing plumbing line using necessary fittings like uPVC pipe (6 Kgf/cm2) , flexible tube, dual outlet dual handle mixer sink faucet etc complete as directed by the Engineer-in-charge. Make: Jindal, Cera or approved brand. Pipe: Supreme/ Finolex. Approximate range for sink bowl is 6000/piece.

Supply and installation of Double Door Refrigerator, capacity 250-260 L, 5 star rating, price ranges Rs.25000-30000. Brand: Kelvinator, Godrej, Whirlpool.

Custom-built table of various size and shapes made of 18mm marine ply laminated with 1 mm thick laminate of approved design and shade, with matching 2mm thick PVC edge banding on the exposed sides and other sides with 0.8mm thick PVC edging and shall be supported by modesty panels with 18mm laminated marine ply using metallic brackets, provided with GI cable managers and cable trays to pass wires, etc. as per drawings / instructions of the Engineer-in-charge.(Size of table 135x75x75 cm) Make: Marineply- Century, Greenply, Kitply Laminate: Century, Greenlam, Kitply

Suppy and installation of storage cupboards on walls using different powder coated aluminium sections (J,I etc) of thick 1.3mm with 3mm thick ACP door shutters, minimum 2 door panels with 4mm clear solid polycarbonate sheet, spring hinges,stainless steel handle, autocloser, beadings etc complete as per the approved design and make of materials. Make: Aluminium- Jindal, Balco, Hindalco. ACP: Eurobond, Alucobond. Steel fittings: Ebco, Sleek, Hettich.

Supply and Installation of Sturdy Net back chairs of overall height 105cm with Metal base, Nylon Castors, 360 Swivel, Synchro tilt mechanisms, Pneumatic height adjustment of at least 100mm, mesh fabric upholstered moulded pu foam seat, Lumbar support and adjustable PU armrest.Make: Godrej/Wipro/Featherlite

Supply and installation of full height pedestal steel Almirah of approved color and design , price range Rs.9000-10000.

Supply and installation of wooden ventilator of size 60x45 cm with glass panelled doors, wooden shutter frames of Anjili/Plavu including providing steel cross rodes etc complete.

Supply, installation and testing for wiring of light/fan points including 3run 1.5 sqmm, FRLS PVC insulated copper conductor, single core cable in surface/concealed through PVC conduit and all accessories as required. MAKE: RR/ HAVELLS /V-GUARD/FINOLEX/CABLE

Supply , laying & testing of following wiring for Air condition, power circuit, UPS circuits / sub main circuits etc using 3run 2.5 sq.mm. FRLS PVC insulated copper conductor, single core cable in surface/ concealed through PVC conduit and all accessories as required. MAKE: HAVELLS/V GUARD/ FINOLEX/RR CABLE

Supply and laying Electrical rigid PVC conduits and Suitable type accessaries like bend, , coupling , 'T' joints etc..of ISI grade, Medium duty for laying through roof/surface/Floor/ brick wall or hollow block wall as spare item if required for extra cabling of power and Net work. 20mm. MAKE : BALCO

Supply & Laying of 4 x 16 sq. mm Al conductor, XLPE insulated, power cable of 1.1 KV grade GI armoured, U.G cable of following size including excavation, sand cushioning, protective covering and refilling the trench concealding work etc as required. MAKE: POLY CAB / HAVELLS /FINOLEX

Supply,installation and testing of 12 inch exhaust fan. Make: Crompton, Havells, Orient

Supply,installation and testing of light duty (400mm) wall mounted fan. Make: Crompton, Havells, Orient

Supply,installation and testing of 8 Modular plate with 3x 6/16 A socket controlled by one 16A oneway switch with open PVC modular box for Mains supply connections. Make: Crabtree(Sapphire) / Legrand

Supply,installation and testing of 8 Modular plate with 3x 6 A socket controlled by one 10A oneway switch with open PVC modular box for UPS supply connections. Make: Crabtree(Sapphire) / Legrand

Supply,installation and testing of 2 Modular plate with 2x10A oneway switch with open PVC modular box for light and fan. Make: Crabtree(Sapphire) / Legrand

Supply and fixing of horizontal type 4way TPN MCB double door distribution board (DB) with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc. complete as required.(Rate excluding MCB /RCCB /Isolator). MAKE: ABB/LEGRAND/L&T/ HAVELLS

Supply and fixing of horizontal type 12way SPN MCB double door distribution board (DB) with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc. complete as required.(Rate excluding MCB /RCCB/ Isolator). MAKE: ABB/ LEGRAND/ L&T/ HAVELLS

Supply and fixing of 2way DB for existing 1TR A/C input supply. MAKE: ABB/ LEGRAND/ L&T/ HAVELLS

Supply and fixing of the following rating, 4pole, 40A residual current circuit breakers (RCCB), having a sensitivity current up to 30/100 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. MAKE: ABB/ LEGRAND/ L&T/ HAVELLS

Supply and fixing of the following rating, 2pole, 32A residual current circuit breakers (RCCB), having a sensitivity current up to 30/100 milli amperes in the existing MCB DB complete with connections,testing and commissioning etc. MAKE: ABB/ LEGRAND /L&T/ HAVELLS

Supply and fixing of the following rating, 4pole, 40A Isolator in the existing MCB DB complete with connections,testing and commissioning etc. MAKE: ABB/LEGRAND/L&T/HAVELLS

Supply and fixing of the following rating MCB-C curve, suitable for inductive load of following poles in MCB DB complete with connections, testing and commissioning etc. as required. MAKE: ABB/ LEGRAND/ L&T/ HAVELLS

Single pole 10A MCB

Single pole 16A MCB

Single pole 20A MCB

2Pole 32 A MCB

2pole 20A MCB

Supply and installation of 20w LED tube light set.

Supply & fixing of 415 V,63A SFU with HRC fuse. MAKE : HAVELLS/ LEGRAND/ GE

Supply and installation of 8 port network switch of 1 GB speed including necessary accesories like Cat-6 UTP cable,RJ-45, Key stone, face plate, Pvc box etc complete as directed by the engineer-in-charge.