Cochin International Airport Limited Tender

Providing and supplying injection epoxy mortar with M8 dia threaded rod of grade 5.8 of minimum 5 micron galvanization to an embedment depth of 80mm. The product should be approved by ETA, ICC, CSTB, COLA, BZS with Shock approval, Seismic (C1 & C2) approval, Fatigue and Fire Approvals in anchors to use in cracked concrete, tested for service temperature of -40 deg. C to +80 deg. C. The chemical should have an ETA approval for 100 years age testing. The fastening should be designed as per guidelines of TR 029. Drilling hole with double flute type drill bits/ hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate embedment depth & number of anchors to be calculated as per the codal provision & the report to be submitted to the project manager/ design engineer for approval. For zones with high seismicity, seismic designs are mandatory.

(SH: - 5.0. - JOINERY WORKS) Providing and fixing straight SSD580 sliding shower cubicle system with one fixed Set 1 panel and one sliding panel, consisting of glass in-line panel, glass sliding door, over hanging ball bearing rollers for sliding door, sliding door knob, pair of magnetic seal, magnetic support profile, door stopper, water disperser, wall connection profile, bracket for joining, glass protection seal, cover profile to clip into the bottom of the track, frame wedge, slide frame profile, frame bracket, cover profile angular, square profile and glass guide to guide the sliding door. Glass thickness for fixed and moving panels will be 8 mm with max door weight of 30 kgs. Fix panel and door panels overlap by approx 40 mm. Standard system height will be 2000 mm and width shall be 2500 mm maximum. Finish of rollers, door knob and all aluminium profiles should be polished chrome. Sealant shall be used at corners and bottom of fixed panel.

Earth work in excavation by means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth.1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil, disposed earth to be levelled and neatly dressed, within the site as directed by the Engineer- in-Charge.