Cochin International Airport Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
₹ 2,950Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CIAL_678121_1Bid Award Id
ViewTender No
CIAL/CIVIL/627/E20Tender Authority
Cochin International Airport Limited ViewPurchaser Address
-Website
http://https://cial.aero/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Do same as Earth work in excavation by means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within 50 m lead as directed by the Engineer- in-Charge. but for every additional lift of 1.5m to 3.00m or part there of Ordinary rock
59
-
-
Filling available excavated earth(excluding rock) in trenches, under floors,plinth,sides of foundation,in areas etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering,lead upto 300 m including cost and conveyance of all materials,labour charges, etc complete at all levels as directed by the Engineer-in-Charge.
218
-
-
Filling in plinth or trenches, under floors, foundations, in areas etc with red earth including watering, ramming consolidating and dressing, cost and conveyance of all materials,labour charges,lead,lift etc complete at all levels as directed by the Engineer-in-Charge
121
-
-
Filling in plinth,or trenches, under floors, in areas with crusher sand including watering, ramming, consolidating and dressing including cost and conveyance of all materials, labour charges, lead, lift etc. complete at all levels as directed by the Engineer-in-Charge.
21
-
-
Disposal of surplus excavated earth / building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading within Airport premises or as directed by Engineer-in-Charge, beyond 50 m initial lead upto 5km including all lifts involved.
194.2
-
-
SH :CONCRETE WORK
-
-
-
Providing and laying cement concrete of specific grade properly mixed and consolidated with hand rammers, including cost and conveyance of all materials, labour, curing, lead ,lift , etc. complete for all work up to plinth levels as directed by Engineer- in-Charge. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
13.28
-
-
Providing and laying cement concrete of specific grade properly mixed and consolidated with hand rammers, including cost and conveyance of all materials, labour, curing, lead ,lift , etc. complete for all work up to plinth levels as directed by Engineer- in-Charge. 1:2:4 (1 Cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size)
49
-
-
Providing and laying cement concrete of specific grade properly mixed and consolidated with hand rammers, including cost and conveyance of all materials, labour, curing, lead lift , etc. complete as directed by Engineer-in-Charge at all levels.
For screed concrete 1:2:4 (1 Cement : 2coarse sand : 4 graded stone aggregate 6mm nominal size)
6
-
-
Providing and laying damp-proof course 50mm thick with cement concrete1:2:4 (1 cement: 2coarse sand : 4 graded stone aggregate of 20mm nominal size) including cost and conveyance of all materials,labour charges,lead,lift etc complete at all levels as directed by the Engineer- in-Charge.
29
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil as directed by the Engineer- in-Charge.
29
-
-
SH : RCC WORK
-
-
-
Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-25 grade cement concrete for foundation,footings,columns,plinth beams reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge . Minimum cement content considered in this item is @ 400 kg/cum
All work upto plinth level.
12
-
-
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M-30 grade conforming to IS 456 or IS 10262 for reinforced cement concrete structural elements,using coarse sand conforming to IS 383 and 20mm nominal size graded hard granite groken stones, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in proportion of 0.5%of weight of cement (asper IS 9103) to accelerate,retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge for trenches, drain,holding tanks etc Minimum cement content is 410Kg/m3.
21
-
-
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262 for reinforced cement concrete for columns,beams,roof slabs, staircase etc using coarse sand conforming to IS 383 and 20mm nominal size graded hard granite broken stones,excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in proportion of 0.5% of weight of cement (asper IS 9103) to accelerate,retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-Charge .Minimum cement content is 400Kg/m3
All works above plinth level upto floor V level
5
-
-
Providing ,hoisting and fixing at all level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand conforming to IS383), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete as per direction of Engineer-in-charge but excluding the cost of reinforcement with design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262.Minimum cement content considered in this item is @ 400 kg/cum
8.15
-
-
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with 16 gauge GI binding wire etc complete including cost, conveyance, lead, lift of all materials for all types of RCC works as per drawing/specification and as directed by Engineer-in-Charge at all levels.
Thermo-Mechanically Treated bars
5159
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns etc. for mass concrete.
21
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
183
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts.
33
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Walls of (any thickness) including attached pilasters butteresses plinth and string course etc.
125
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landing , beams and balconies (Plan area
to be measured)
18
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slab and breaks in floors and walls under 20 cms wide.
23
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Extra for providing and mixing water proofing compound in cement concrete work, masonry work, plastering etc in the proportion recommended by the manufacturers including cost and conveyance of all materials, labour, curing, lead lift , etc. complete as directed by Engineer-in-Charge at all levels.
31
-
-
SH :MASONRY WORK
-
-
-
Providing and constructing Solid concrete block masonry M-10 grade (mix1:3:6) (1 cement: 3 crusher sand, 6 aggregates 6mm ) in C.M1:6(1cement, 6 crusher sand) with Solid blocks of 30x20x15 cm size and approved quality including scaffolding, raking out of joints,curing, cost and conveyance of all materials, labour, lead, lift, etc. complete for all types of masonry works below the highest plinth level as directed by Engineer-in-charge.
23
-
-
Providing and constructing Solid concrete block masonry M-10 grade (mix1:3:6) (1 cement: 3 crusher sand, 6 aggregates 6mm ) in C.M1:6(1cement, 6 crusher sand) with Solid blocks of 30x20x15 cm size and approved quality including scaffolding, raking out of joints,curing, cost and conveyance of all materials, labour, lead, lift, etc. complete for all types of masonry works above the highest plinth level as directed by Engineer-in-charge.
41
-
-
Providing and constructing 100 mm solid block masonry in CM 1:4 (1 cement, 4 crushersand) in partition walls, parapets, etc. with blocks of standard sizes and of approved quality (average compressive strength not less than 10N/mm2) including scaffolding, raking out of joints, curing, cost and conveyance of all materials, lead,lift, etc.complete including providing 2 Nos. of 6mm dia bars as reinforcement at every third layer wherever specified (Reinforcement shall be measured and paid for under relevent item ) and as directed by Engineer-in-Charge.
19
-
-
Extra for providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of single block masonry at all levels including cost and conveyance of MS bars, labour charges, etc complete as directed by Engineer-in-Charge at all levels.
171
-
-
SH : FLOORING WORK
-
-
-
Providing and laying double charged vitrified antiskid tile flooring matte finish 600 x 600 mm, 9- 10 mm thick with water absorbtion less than 0.08% of first quality confirming to IS:15622 with abrasion resistance less than 144 cubic mm, breaking strength greater than or equal to 2200N, which is stain resistant and chemical resistant of approved make, shade and pattern laid with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack,abrasion and resistance confirming to British Standards 5980:1980 ,including cost and conveyance of all materials, labour charges,lead, lift, curing,cleaning and clearing the debris from all levels and disposing etc, complete and tile protection till handover as directed by Engineer-in-Charge at all levels. The rate includes cutting the sharp edges of tiles with specialised machinery wherever required . The purchase price( excluding GST) of Polished/matte double charged vitrified tile should be taken as Rs.592/-sqm and any deviation plus or minus in the purchase price( Excluding tax) in approved shade will be adjusted(paid extra or deducted) while making payment to the contractor.The above work shall be carried out by an agency having sufficient experience in flooring and only skilled and experienced persons shall be employed for this purpose.
77
-
-
Providing and laying double charged Polished/matte vitrified tile skirting/dadoing of range 600 x 1200 mm , 9.0- 10 mm thick with water absorbtion less than 0.08% of first quality confirming to IS:15622 with abrasion resistance less than 144 cubic mm, breaking strength greater than or equal to 2200N, which is stain resistant and chemical resistant of approved make, shade and pattern laid with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack,abrasion and resistance confirming to British Standards 5980:1980 ,including cost and conveyance of all materials, labour charges,lead, lift, curing, cleaning and clearing the debris from all levels and disposing etc, complete and tile protection till handover as directed by Engineer-in-Charge at all levels. The rate includes cutting the sharp edges of tiles with specialised machinery wherever required . The purchase price( excluding tax) of Polished /matte double charged vitrified tile should be taken as Rs 753/sqm and any deviation plus or minus in the purchase price( excluding tax) in approved shade will be adjusted(paid extra or deducted) while making payment to the contractor.The above work shall be carried out by an agency having sufficient experience in flooring and only skilled and experienced persons shall be employed for this purpose.
395
-
-
Providing and laying Polished/lapothra Granite stone for kitchen platforms, vanity counters ,cladding, treads, risers and landing of staircase etc , in required design and patterns, in linear as well as curvilinear portions of the building, as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(The purchase price excluding GST of Granite stone slab should be taken as Rs.1800/sqm and any deviation plus or minus in the purchase price in approved shade will be adjusted(paid extra or deducted) while making payment to the contractor).
100
-
-
Providing and laying Brushed Sadarahalli /approved Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(The purchase price( excluding tax) of sadarhally stone slab should be taken as Rs.1340/sqm and any deviation plus or minus in the purchase price( excluding tax) in approved shade will be adjusted(paid extra or deducted) while making payment to the contractor).
284
-
-
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite work including providing necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete as directed by the Engineer-in-Charge at all levels.
21
-
-
Providing and laying 25 mm thick Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) etc complete all as per direction of the Engineer in charge.(The purchase price excluding GST of Granite stone slab should be taken as Rs.280/sqm and any deviation plus or minus in the purchase price in approved shade will be adjusted(paid extra or deducted) while making payment to the contractor).
193
-
-
Providing and laying Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing etc complete all as per direction of the Engineer in charge.(The purchase price excluding GST of Granite stone slab should be taken as Rs.280/sqm and any deviation plus or minus in the purchase price in approved shade will be adjusted(paid extra or deducted) while making payment to the contractor).
15
-
-
SH : STEEL WORK
-
-
-
Steel work in built up tubular ( round, square or rectangular hollow sections etc.) trusses etc., including cutting, hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including welding and bolted with special shaped washers etc, cost and conveyance of all materials,labour charges, scaffolding, lead,lift etc complete as directed by Engineer-in-Charge at all levels.: Electric resistance or induction butt welded tubes
22343
-
-
Labour charges only for departmently supplied Steel work in built up tubular ( round, square or rectangular hollow sections etc.) trusses etc., including cutting, hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including welding and bolted with special shaped washers etc, cost and conveyance of all materials,labour charges, scaffolding, lead,lift etc complete as directed by Engineer-in-Charge at all levels.
4180
-
-
Structural steel work welded in built up sections,trussess and framed work including cutting, hoisting, fixing in position and applying two coats of Synthetic enamel paint over two coats of anticorrossive yellow zinc chromate primer including cost and conveyance of all materials,labour charges, lead,lift, scaffolding etc complete as directed by Engineer- in-Charge at all levels.
1111
-
-
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
180
-
-
Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh(weight not less than 7.75kg/sqm) or other suitable size wire mesh to be fixed & firmly welded/bolted to the existing MS frame work including the cost of materials, labour, nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
47
-
-
SH : ROOFING WORKS
-
-
-
Providing and fixing ridge/ valley capping/flashing in required width (upto maximum 600 mm) with plain galvalume colour coated sheet made out of 0.50mm TCT, minimum 300 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms/sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all materials, scaffolding, lead, lift, labour charges etc. complete at all levels as directed by Engineer-in-Charge
92
-
-
Supply & fixing of two-piece laminated shingles roofing with shingles of size (335mm x 984mm) , algae resistant colour coated, 110mph wind resistant fiber glass composition and ULclass A fire resistant rating laid over 12 mm thick cement fibre board as per manufactures specification. The rate shall include cost and conveyance of all material,starter,fibre cement board,bitumen, labour charges, lead etc. complete as directed by engineer - in- charge at all levels. (all works covered by this specification shall be carried by an experienced agency having sufficient experience in this type of roofing system only skilled and experienced persons shall be employed for this purpose.)
454
-
-
Supply and instillation of UPVC rain water gutter of size 320mmx200mm,3mm (4kg/cm2 gauge)thickness ,added rib for extra strength at roof end as per drawing, including finishing joints as approved by the Enginner in Charge.The gutter shall be supported on MS brackets and M.S brackets shall be measured and paid under relevant item. Gutter shall receive the downspouts at designed intervals and all joints with downspouts should be welded and made water tight . Gutter shall be fixed in lines and levels including cost and conveyance of all materials,labour charges, scaffolding, etc complete as directed by the Engineer in charge at all levels.
92
-
-
Providing and fixing 12 mm thick toughened glass on existing approved frame work on top roofing area as per manufacturers specification. The rate shall includes cost and conveyance of all materials, labour charges, lead, lift, ,all fixing arrangement and making necessary holes,glass to glass joining (with silicon ) etc all complete as per approved drawing as directed by Engineer-in-Charge .All toughened Glass shall be heat soaked.(frame work shall be measured under relevent item)
109
-
-
SH : DISMANTLING & DEMOLITION WORKS
-
-
-
Dismantling aluminium/ Gypsum partitions, doors, windows and fixed glazing without damaging the existing structures including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
155
-
-
Taking out the existing ceiling tile without any damages of surrounding tiles including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
598
-
-
Refixing the dismantled ceiling tiles without damaging the existing ceiling tiles/patterns at all levels as per the detailed drawing and as directed by the Engineer in charge including all scffolding charges etc complete.
359
-
-
Demolishing cement concrete including screed manually/by mechanical means at all levels and disposal of all material, including dismantling of conduits,wires etc ,within 5km lead as per direction of Engineer-in-Charge.
11
-
-
Demolishing R.C.C work at all levels, including stacking of steel bars and disposal of all unserviceable materials , including dismantling of conduits, wires etc within 5km lead as per direction of Engineer-in-Charge
13.4
-
-
Demolishing brick work/ solid block masonry by manually / by mechanical means at all levels including stacking of serviceable material and disposal of all unserviceable materials, including dismantling of electrical switches/sockets, conduits,wires etc,within 5km lead as per direction of Engineer-in-Charge.
19
-
-
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 5 km lead as per direction of Engineer-in-charge.
979
-
-
Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of : G.S. Sheet
11
-
-
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
510
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 5 km lead.
42
-
-
Dismantling doors, windows and clerestory windows (Aluminium,steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area 3 sq. metres and below.
45
-
-
Dismantling doors, windows and clerestory windows (Aluminium,steel or wood) shutter including chowkhats, architrave, holdfasts etc. Complete and stacking within 50 metres lead: of area beyond 3.00 sqm
3
-
-
Dismantling/taking out Water Closet,urinals,urinal deviders,cp fittings ,wash basin etc including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge
75
-
-
Labour charges only cutting and refixing existing structural glazing work as per design ,this includes all labour charge for cutting any shape and refixing the same to the existing glass work and finishing the same as per the Engineer in charge.
8
-
-
SH:- JOINERY WORKS
-
-
-
Supplying & fixing fully finished Pre Hung flush door size 800x2100x35mm Both side HP Laminate door Standard of approved colour/pattern pattern Flush door with matching PVC Wrapped WPC Jamb with front side Architrave back side Tackers. Door of 35mm thick with 4 side edges PVC lipping / Lock Hole Boring (Using mortise lock) / Hinge Rebate Cutting (4 Nos) / Extruded Sauerland core filling from Germany.Jamb width 100 mm.door Latch with Lever handles without Keys -SS finish - SUS 304 - 1 No.door Hinges 4" SS finish (304 Grade) - 4 Nos.Tower bolt 6" SS finish (202Grade) - 1 No with matching PVC Wrapped WPC Jamb with front side architrave back side Tackers,Latch with Lever handles without Keys -SS finish - SUS 304 - 1 No.Jacdoor Hinges 4" SS finish (304 Grade) - 4 Nos.
Tower bolt 6" SS finish (202Grade) - 1 No... The rate shall includes cost and conveyance of all materials,all labour charges,PU foam,Construction bolt, Silica,Gum, Nails lead,lift ,etc complete as directed by Engineer-in-Charge at all levels.
21
-
-
Providing and fixing slimline concealed door closer , with necessary accessories like SS 304 screws etc, including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge at all levels.(The purchase price (excluding GST)considered for door closer is Rs.7871/no and any deviation plus or minus in the purchase price (excluding GST) will be adjusted(paid extra or deducted) while making payment to the contractor).
13
-
-
Providing and fixing SS-304 grade mirror polished finish ball bearing butt hinges of 100x75x3 mm size including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge at all levels.(The purchase price (excluding GST) considered for butt hinge is Rs.243/no and any deviation plus or minus in the purchase price (excluding GST)will be adjusted(paid extra or deducted) while making payment to the contractor).
104
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)
Second class teak wood
5.13
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters
63
-
-
Providing and fixing 12 mm thick toughened glass on existing approved frame for partition work/door shutter as per manufacturers specification. The rate shall includes cost and conveyance of all materials, labour charges, lead, lift, ,all fixing arrangement and making necessary holes,glass to glass joining (with silicon ) etc all complete as per approved drawing as directed by Engineer-in-Charge .All toughened Glass shall be heat soaked.(frame work shall be measured under relevent item)
89
-
-
Providing and applying two or more coats PU finish( Matt, semi glossy, glossy )to give a smooth finish on wood work over two coats of PU sealer. The surface is suitably cleaned using sand paper, filling of grains with wood filler and dent filler, applying approved wood stain as per the direction of Engineer-in -Charge for getting required shade ,applying 2 coats of PU sealer ,sanding the surface after applying PU sealer and applying 2 coats of PU top coat complete as per the technical specification of manufacturer and as directed by Engineer-in-Charge. The rate shall includes the cost and conveyance of all materials, labour charges, lead, lift etc complete as directed by Engineer-in-Charge at all levels.
156
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
190
-
-
Providing and fixing a pair of D type pull Handle of 25 mm Dia X 1000 mm size ,mirror polished SS 304 grade with all fixtures and necessary ss screws etc.including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge at all levels.(The purchase price considered for a pair of D type pull handle is Rs.6000/no excluding GST and any deviation plus or minus in the purchase price will be adjusted(paid extra or deducted) while making payment to the contractor).
55
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer with arm(having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 100kg), with necessary accessories like SS 304 grade plate and screws etc, including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge at all levels.(The purchase price considered for door closer is Rs.1702/no excluding GST and any deviation plus or minus in the purchase price will be adjusted (paid extra or deducted) while making payment to the contractor).
10
-
-
Providing and fixing aluminium work for frame work for partitions with extruded built up standard tubular sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge at all levels.
For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
210
-
-
Labour charges only for fixing departmenly supplied aluminium work for frame work for partitions with extruded built up standard tubular sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge at all levels.
For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
144.68
-
-
Providing & fixing 9 mm thick BWP grade ply confirming to IS- 710 on existing Aluminum frame work for column , wall cladding etc using approved size screws at every 600 mm center to center at all levels as per drawing.The ply shall be fixed in correct line and level as per drawing and as directed by the Engineer in charge. The rate shall include the cost & conveyance of all materials, labour charges,levelling, lead, lift , cutting any shapes , provisions for electrical, networking fixtures wherever required, etc complete as directed by Engineer in Charge at all levels.
56
-
-
Labour charges only for fixing departmentlay supplied 9 mm thick BWP grade ply confirming to IS- 710 on existing Aluminum frame work for column , wall cladding etc using approved size screws at every 600 mm center to center at all levels as per drawing.The ply shall be fixed in correct line and level as per drawing and as directed by the Engineer in charge. The rate shall include the labour charges,levelling, lead, lift , cutting any shapes , provisions for electrical, networking fixtures wherever required, etc complete as directed by Engineer in Charge at all levels.
123
-
-
Design,supplying and fixing in position Fluted /Louvers panels as per drawing. The core of the fulted/Louver panels shall be PVC composite material and the finish shall be of wooden finish . Each panel shall be of size 3060X230mm or nearest and the thickness of the panel shall be 1.20mm nearest.Panel shall be fixed to the approved GI sections as per design and the GI frame work shall be fixed ti the main MS frame work as per design and drawing.Exposed edges of the Fluted /Louvers panels shall be protected with corner/Edge/T trim of matching shade. The cost shall be inclusive of all material, corner/Edge/T trim,GI framework,acessories, fixing screws, conveyance, lead , lift, etc complete at all levels as directed by Engineer in charge.The purchase price ( excluding tax)of panel to be considered as Rs 1453/sqm any deviation plus or minus in the purchase price( excluding tax) in approved shade will be adjusted while making payment to the contractor.Dismantling ,Removing,Leading to allocated locations,Refixing of Existing Collars of Air terminal devices including Air distribution System as per the instructions of Engineer in charge shall be in the scope of works.The contractor shall making the cut outs for HVAC grills/diffusers/service access doors, electrical/fire fighting/CCTV appliances etc wherever necessary.The above work shall be carried out by an agency having sufficient experience and should ensure a warranty for a period of 10 years .Only skilled and experienced persons shall be employed for this purpose.
1716
-
-
Providing & fixing interior grade high pressure compact laminate conforming to IS:2046-1995 of 8mm thickness over existing ply and Aluminum frame work for cladding works using adhesives or double sided tapes or screws as per manufactures specification .Grooves finished with Aluminium/SS channels of approved size and colour(will be measured and paid seperately).The rate shall include cost and conveyance of all materials,cutting , polishing, making grooves, cutout for fixtures if any, labour charges, lead, lift ,scaffolding,etc complete as per drawing and as directed by Engineer in Charge at all levels.
The purchase price( excluding GST) of HPL sheets shall be taken as Rs-2282/sqm and any deviation plus or minus in the purchase price( excluding GST) will be adjusted(paid extra or deducted) in the payment making to contractor)The contractor shall making the cut outs for HVAC grills/diffusers/service access doors, electrical/fire fighting/CCTV appliances etc wherever necessary.The above work shall be carried out by an agency having sufficient experience and should ensure a warranty for a period of 10 years .Only skilled and experienced persons shall be employed for this purpose.
158
-
-
Labour charges only for fixing departmentaly supplied interior grade high pressure compact laminate conforming to IS:2046-1995 of 8mm thickness over existing ply and Aluminum frame work for cladding works using adhesives or double sided tapes or screws as per manufactures specification .Grooves finished with Aluminium/SS channels of approved size and colour(will be measured and paid seperately).The rate shall include ,cutting , polishing, making grooves, cutout for fixtures if any, labour charges, lead, lift ,scaffolding,etc complete as per drawing and as directed by Engineer in Charge at all levels.
The contractor shall making the cut outs for HVAC grills/diffusers/service access doors, electrical/fire fighting/CCTV appliances etc wherever necessary.The above work shall be carried out by an agency having sufficient experience and should ensure a warranty for a period of 10 years .Only skilled and experienced persons shall be employed for this purpose.
271
-
-
Providing and fixing Acoustic wall panels with Suitable colour pattern as per the approved drawing, 2400X1220X9mm or approved as per manufactures specification,. Thickness Tolerance T2 (± 1 mm) according to EN 13168. Edges shall be straight cut. The Acoustic panels shall be fixed to the existing 8/9mm ply panelling using SR-998/arobond or equivalent adhesive.Raw material shall be Recycled PET bottles . The finished face of panels have NRC of 0.70 as per ASTM C423. The contractor shall making the cut outs for HVAC grills/diffusers/service access doors, electrical/fire fighting/CCTV appliances etc wherever necessary. The Samples of the panel shall be submitted to the Engineer-in charge for approval .The purchase price( excluding GST) of acoustic panel shall be taken as Rs -1200/sqm and any deviation plus or minus in the purchase price( excluding GST) will be adjusted(paid extra or deducted) in the payment making to contractor)The above work shall be carried out by an agency having sufficient experience and should ensure a warranty for a period of 10 years .Only skilled and experienced persons shall be employed for this purpose.
203
-
-
Providing & fixing Stainless steel T profile ,having sizes of 14 mm wide and up to 9 mm high as per manufacturer’s standard. The finish of the profile is Satin Stainless Steel polished as approved by the Engineer in charge . The profile is to be fixed with adhesives per manufacturer’s specification and as approved by the Engineer in charge. The rate shall includes the cost and conveyance of all materials,adhesive labour charges,lead, lift,curing, complete as directed by Engineer in charge at all levels The purchase price ( excluding tax)of T profile to be considered as Rs 1027/rm any deviation plus or minus in the purchase price( excluding tax) in approved shade will be adjusted while making payment to the contractor.The above work shall be carried out by an agency having sufficient experience and only skilled and experienced persons shall be employed for this purpose.
510
-
-
Providing & fixing aluminium T profile ,having sizes of 14 mm wide and up to 9 mm high as per manufacturer’s standard. The finish of the profile is gold polished aluminium as approved by the Engineer in charge . The profile is to be fixed with adhesives per manufacturer’s specification and as approved by the Engineer in charge. The rate shall includes the cost and conveyance of all materials,adhesive labour charges,lead, lift,curing, complete as directed by Engineer in charge at all levels. The purchase price ( excluding tax)of T profile to be considered as Rs 881/rm any deviation plus or minus in the purchase price( excluding tax) in approved shade will be adjusted while making payment to the contractor.The above work shall be carried out by an agency having sufficient experience and only skilled and experienced persons shall be employed for this purpose.
170
-
-
Providing and fixing tower bolt of 150mm size in mirror polished SS - 304 grade with necessary SS 304 grade screws etc. complete including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge.(The purchase price considered for tower bolt is Rs.243/no excluding GST and any deviation plus or minus in the purchase price will be adjusted (paid extra or deducted) while making payment to the contractor).
41
-
-
Providing and fixing 6 levers mortice lockcase and double cylinder with key of mirror polished SS-304 grade and necessary SS 304 grade screws etc including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge at all levels.(The purchase price considered for mortise lockcase and double cylinder with key is Rs.1438/no excluding GST and any deviation plus or minus in the purchase price will be adjusted(paid extra or deducted) while making payment to the contractor).
23
-
-
Supplying and fixing electrically operated rolling shutters of approved make, made of required size GI laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, GI side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 part 1 and GI top cover of required thickness for rolling shutters including two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, including cost and conveyance of all materials, labour charges,lead,lift etc complete as directed by Engineer in Charge at all levels.80 x 1.25mm GI laths with 1.25mm thick top cover
11
-
-
Providing and fixing ball bearing for rolling shutters including cost and conveyance of all materials, labour, etc. as directed by the Engineer-in-Charge at all levels.
4
-
-
Extra for providing capsule type GI rolling grill for rolling shutter instead of laths as per the design approved by the Engineer-in-Charge(area of grill to be measured)
2
-
-
Supplying and fixing of Frameless fully openable Patch Fitting door using 12mm thick clear toughened glass. The glass shutter should be polished on the edges. The shutter should be mounted with required Floor Spring with SS cover plate, with adjustable spring strength depending on door width, 25mm dia 450mm long SS pull handles, top and bottom patch, central patch lock, door stopper etc. All hardwares are of SS satin finish, 304 grade unless other wise mentioned.The rate shall includes cost and conveyance of all materials,all hardwares, labour charges, lead, lift, etc complete as directed by Engineer-in-Charge at all levels. The Patch Fittings & Floor Spring fittings shall conform to EN 1154 Standards with adjustable spring strength (EN1-4)
6
-
-
Providing & fixing solid core flush door 35 mm thick of approved make conforming to IS :2202 (Part I) , core of block board, inside frame of ist class hard wood of 2inch x1 inch with block board infill with 3mm thick ply on either side and inner hardwood and outer best quality teak wood lipping, finished with 1mm thick decorative laminate of approved make, finish & colour on both sides. The shutter edges shall be painted to match colour with the laminate .Flush door shutter shall be fixed to the existing teak wood / aluminium / slim line aluminium frame including ISI marked Stainless Steel butt hinges with necessary screws as required and as directed by the Engineer in Charge . Frame should be fixed to masonry wall/ partions etc.using anchor fastners/dash fastners, with clear anti-termite treatment for the concealed portion of frame.Manufacturer to make provision for all hardware items of approved make and design as per drawing, to be fixed on the door shutter and frame.The rate shall includes cost and conveyance of all materials,all labour charges,lead,lift ,etc complete as directed by Engineer-in-Charge at all levels. (Door frame will be measured and paid under relevant items).
21.5
-
-
(SH: FINISHING WORKS)
-
-
-
6 mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.
11
-
-
12mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, lead, lift, labour charges, curing, scaffolding, sundries , etc complete as directed by Engineer-in-Charge at all levels.
641
-
-
15mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.
246
-
-
15mm cement plaster of mix, 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement 2 kg/sqm including mixing water proofing material in separately).proportion recommended by manufacturer at all heights including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels. (water proofing liquid will be paid separately)
76
-
-
Applying one coat of alkaline resistant cement primer of approved brand and manufacture on wall surface including cost and conveyance of all materials, labour charges, lead, lift, scaffolding, sundries etc complete as directed by Engineer-in-Charge at all levels.
907
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade for new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). including cost and conveyance of all materials, labour charges, scaffoldings etc complete as directed by the Engineer in Charge at all levels.
523
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
310
-
-
Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
310
-
-
Providing and fixing Translucent, cast PVC, self-adhesive vinyl, special DUSTED-effect film to reproduce acid-etching effect on glass with customised designs. MCS warranty of 3 (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited or equivalent etc complete as directed by the Engineer in Charge at all levels.
126
-
-
Wall painting with luxury acrylic emulsion paint of interior grade,antifungal & anti bacterial and scratch & stain resistant of approved brand and manufacture to give an even shade on new work Two or more coats over the priming coat(measured and paid separately), for even shade and colour, luxurious high sheen finish and washable emulsion including cost and conveyance of all materials, labour charges, scaffolding, lead,lift,sundries ,etc complete as directed by Engineer-in-Charge at all levels.
565
-
-
Providing and fixing one layer of GI chicken wire mesh of 24 guage including fixing with nails, etc. at the junction of brick masonry and RCC or at any other place including cost and conveyance of all materials, labour,scaffolding charges etc. complete as directed by Engineer-in-Charge, at all levels.
24
-
-
Providing and constructing soak pit of size 4m diax1.5 ht with honey comb brick work on the sides upto a height of 1.m and brick masonry in cm 1:6 for the balance height ,providing and filling brick bat graded up to 1.2m ,providing and laying precast slab over pit supportting on the brick work ,including cost and conveyance ,all materials, labour charges,lead ,lift ec complete al as directed by Engineer in charge
1
-
-
Providing and constructing soak pit of size 1.5X1.5M with 1.5 ht with honey comb brick work on the sides upto a height of 1.m and brick masonry in cm 1:6 for the balance height ,providing and filling brick bat graded up to 1.2m ,providing and laying precast slab over pit supportting on the brick work ,including cost and conveyance ,all materials, labour charges,lead ,lift ec complete al as directed by Engineer in charge
2
-
-
SH: CEILING SYSTEMS
-
-
-
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner uitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm ade out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, utting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
364
-
-
Supplying and fixing in position Fluted /Louvers panels in ceiling as per drawing. The core of the fulted/Louver panels shall be PVC composite material and the finish shall be of wooden finish . Each panel shall be of size 3060X265mm or nearest and the thickness of the panel shall be 1.20mm or nearest.Panel shall be fixed to the approved GI sections as per design and the GI frame work shall be fixed ti the main MS frame work as per design and drawing.Tensile strength of the panel shall be greater than 37 Mpa and tensile modulus shall be greater than 2000Mpa.Exposed edges of the Fluted /Louvers panels shall be protected with corner/Edge/T trim of matching shade. The cost shall be inclusive of all material, corner/Edge/T trim, conveyance, lead , lift, acessories, fixing screws etc and as directed by Engineer in charge.The purchase price ( excluding tax)of panel to be considered as Rs 1453/sqm any deviation plus or minus in the purchase price( excluding tax) in approved shade will be adjusted while making payment to the contractor.The contractor shall making the cut outs for HVAC grills/diffusers/service access doors, electrical/fire fighting/CCTV appliances etc wherever necessary.The above work shall be carried out by an agency having sufficient experience and should ensure a warranty for a period of 10 years .Only skilled and experienced persons shall be employed for this purpose.
404
-
-
(SH: MISCELLANEOUS WORK)
-
-
-
Providing and supplying medium duty stud anchors HST 3 OR Equivalent of sizes M8/M10/M12/M16/M20/M24 and shall be approved for cracked concrete, fire ETA & seismic ETA C1/C2 appoved. The anchor should be cold formed carbon steel anchor, Galvanised/Stainless steel externally threaded and consists of 3 part expansion sleeve. Manufacture should submit Seismic Anchor Design Report based on Design Loads & other parameters as provided by consultant. Metal anchors should be designed in accordance with ETAG 001 Annex C “guidelines for anchorage of metal anchors for use in concrete”. Application at site should be done as per manufacturer guidelines.Safety stud anchor HST3 M20x200 -/60
5
-
-
Providing and supplying medium duty stud anchors HST 3 OR Equivalent of sizes M8/M10/M12/M16/M20/M24 and shall be approved for cracked concrete, fire ETA & seismic ETA C1/C2 appoved. The anchor should be cold formed carbon steel anchor, Galvanised/Stainless steel externally threaded and consists of 3 part expansion sleeve. Manufacture should submit Seismic Anchor Design Report based on Design Loads & other parameters as provided by consultant. Metal anchors should be designed in accordance with ETAG 001 Annex C “guidelines for anchorage of metal anchors for use in concrete”. Application at site should be done as per manufacturer guidelines.Safety stud anchor HST3 M16x170 70/50
42
-
-
Providing and supplying medium duty stud anchors HST 3 OR Equivalent of sizes M8/M10/M12/M16/M20/M24 and shall be approved for cracked concrete, fire ETA & seismic ETA C1/C2 appoved. The anchor should be cold formed carbon steel anchor, Galvanised/Stainless steel externally threaded and consists of 3 part expansion sleeve. Manufacture should submit Seismic Anchor Design Report based on Design Loads & other parameters as provided by consultant. Metal anchors should be designed in accordance with ETAG 001 Annex C “guidelines for anchorage of metal anchors for use in concrete”. Application at site should be done as per manufacturer guidelines.Safety stud anchor HST3 M12x145 70/50
73
-
-
Providing and supplying medium duty stud anchors HST 3 OR Equivalent of sizes M8/M10/M12/M16/M20/M24 and shall be approved for cracked concrete, fire ETA & seismic ETA C1/C2 appoved. The anchor should be cold formed carbon steel anchor, Galvanised/Stainless steel externally threaded and consists of 3 part expansion sleeve. Manufacture should submit Seismic Anchor Design Report based on Design Loads & other parameters as provided by consultant. Metal anchors should be designed in accordance with ETAG 001 Annex C “guidelines for anchorage of metal anchors for use in concrete”. Application at site should be done as per manufacturer guidelines.Safety stud anchor HST3 M10x130 70/50
10
-
-
Providing and supplying medium duty stud anchors HST 3 OR Equivalent of sizes M8/M10/M12/M16/M20/M24 and shall be approved for cracked concrete, fire ETA & seismic ETA C1/C2 appoved. The anchor should be cold formed carbon steel anchor, Galvanised/Stainless steel externally threaded and consists of 3 part expansion sleeve. Manufacture should submit Seismic Anchor Design Report based on Design Loads & other parameters as provided by consultant. Metal anchors should be designed in accordance with ETAG 001 Annex C “guidelines for anchorage of metal anchors for use in concrete”. Application at site should be done as per manufacturer guidelines.Safety stud anchor HST3 M8x115 -/50
5
-
-
Providing and supplying injection epoxy mortar with M12 dia threaded rod of grade 5.8 of minimum 5 micron galvanization to an embedment depth of 150 mm. The product should be approved by ETA, ICC, CSTB, COLA, BZS with Shock approval, Seismic (C1 & C2) approval, Fatigue and Fire Approvals in anchors to use in cracked concrete, tested for service temperature of -40 deg. C to +80 deg. C. The chemical should have an ETA approval for 100 years age testing. The fastening should be designed as per guidelines of TR 029. Drilling hole with double flute type drill bits/ hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer's recommendations. The adequate embedment depth & number of anchors to be calculated as per the codal provision & the report to be submitted to the project manager/ design engineer for approval. For zones with high seismicity, seismic designs are mandatory.
100
-
-
Providing and applying Antitermite treatment by Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc
77
-
-
Providing and applying Antitermite treatment by injecting chemical emulsion Imidacloprid emulsiable concentrate 0.075% for pre-constructional treatment and creating a chemical barrier as per IS 6313 (Part II) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building, etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge. (Plinth area only to be measured for the payment )
289
-
-
SH :SANITARY INSTALLATION
-
-
-
Providing and fixing sanitary fixtures for handicapped toilet including one wash basin of approved size, one pair mounting brackets and all other related CP brass fittings like paper holder, bottle trap,angle valve for EWC and Wash ,waste coupling etc.One number EWC & Cistern with raised soft push button for convenient access complete with fittings & seat cover , one no.stainless steel hinged rail 76 cm & five nos. of stainless steel grab rails 60 cm and one no.of clinical Faucet with spatula lever etc of approved make as per drawing & as per manufactures specification .The rate is including cost and conveyance of all materials, labour charges, lead,lift,cutting and making good the walls,floors,slab wherever required etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in charge at all levels.(The purchase price(inclusive of all taxes) of handicapped toilet is Rs.56601/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
1
-
-
Providing & fixing of star white vitreous China European floor mounted one piecec EWC with soft close seat and lid with CP brass hinges and rubber buffers with twin flushing cistern 3/9 litre water storage with chrome finish wall plate actuator of approved make and model complete including cost and conveyance of all materials,labour charges,lead.lift, cutting, making good the walls, floors, slab wherever required testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels.(The purchase price(inclusive of all taxes) of one piece WC pan with soft close seat and lid including all accessories shall be taken as Rs 7863/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
20
-
-
Providing & fixing star white vitreous china flat back urinal with inbuilt sensor of approved size with all accessories to provide satisfactory functioning including necessary wall cutting / chasing and making good, as required for urinal flushing etc complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels.(The purchase price(inclusive of all taxes) of urinal with inbuilt sensor shall be taken as Rs .18063/-.. and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor. The inlet pipe inside urinal shall be 450mm long and pressure rating 3 -6 bar). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
20
-
-
Providing and fixing of star white vitreous china urinal division plate of approved quality and make with fittings/fastener including cutting and making good the walls, cost and conveyance of all material, labour charge, lead, lift, all taxes etc. complete as directed by the Engineer-in-Charge. (The purchase price considered for star white vitreous china urinal division plate is Rs 4675/- and any deviation plus or minus in the purchase price will be adjusted(will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
18
-
-
Providing & fixing of star white vitreous china counter top wash basin of approved size, C P brass waste assembly, CP brass bottle trap with extension piece 450mm long connections pipes wall flanges and rubber adapters for waste connection,angle valve, Pillar Cock with 200mm extension Body, complete including CI/MS brackets duly painted, nuts, washers, etc. The rate is including cost and conveyance of all materials,labour charges,lead.lift, cutting, making good the walls, floors, slab wherever required, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-Incharge at all levels.(The purchase price(inclusive of all taxes) of counter top WB is Rs 3222/- ., Pillar Cock with 200mm extension Body -Rs 2508/- ,angle valve-Rs.1080/-., bottle trap-Rs .1573/-.,waste coupling-Rs-.510/-.. and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
42
-
-
Providing and fixing CP brass hand spray with lever control (health faucet) of make 1meter long flexible tube and wall hook,CP brass angle valve and all fittings and fixtures of approved make etc complete including cutting and making good the walls, floors,slab wherever required.The rate is including cost and conveyance of all materials, labour charges, lead,lift etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in charge at all levels.(The purchase price(inclusive of all taxes) of CP brass hand spray with lever control is Rs.1466/-., angle valve-Rs .1080./- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
21
-
-
Providing and fixing CP brass long body bib cock of approved quality and make conforming to IS standards and weighing not less than 690 gms including cost and conveyance of all materials, labour charges, sundries,lead,lift,cutting and making good the walls,floors,slab etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in charge at all levels. (The purchase price(inclusive of all taxes) CP brass long body bib cock is Rs..927/- ..and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
15 mm nominal bore
23
-
-
Providing and fixing frameless mirror of thickness 5.5 to 6mm, with all four edges machine polished/bevelled and back side protected with safety film and 4 mm thick BWP grade Plywood backing and fixed on walls with mirror screws(spacer). The rate is including cost and conveyance of all materials, labour charges, lead,lift ,cutting and making good the walls,floors,slab etc complete as directed by the Engineer-in-Charge at all levels.
26
-
-
Providing and fixing CP robe hook etc complete testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. (The purchase price(Inclusive of all taxes) of Robe hook Rs 298/-and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
20
-
-
Providing and fixing under counter mounting pressmatic liquid soap dispenser of approved make including cost and conveyance of all materials labour charges ,lead, lift, cutting and making good the walls, floors and slab wherever required etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in Charge at all levels .(The purchase price(inclusive of all taxes) of under counter mounting pressmatic liquid soap dispenser is Rs.1403/-. and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
19
-
-
Providing and fixing stainless steel pedal type dust bin (12 litre capacity)matt finish step bin round- fast close with black lid of approved quality and make including cost and conveyance of all materials labour charges ,lead, lift,cutting and making good the walls,floors ,slabs wherever required as per direction of Engineer-Incharge at all levels(The purchase price(inclusive of all taxes) of stainless steel pedal type dust bin is Rs .1662./- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
10
-
-
Providing and fixing PVC floor trap of 110mm outer dia(multitrap) including SS cockroach free floor grating with cup etc including cost and conveyance of all materials labour charges ,lead, lift, cutting and making good the walls and floors etc complete as directed by the Engineer-in-Charge at all levels..(The purchase price(inclusive of all taxes)cockroach trap with floor gratings Rs .584/-.. and pvc multi floor trap is Rs..263/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
43
-
-
Providing and fixing floor mounted stainless steel A ISI 304 (18/8) sink of size 1145x510mm bowl depth250mm with drain board, CP brass waste coupling ,CP brass sink cock with regular swinging spout with wall flange(2 nos) etc per IS: 13983 with C.I. brackets & stainless steel plug, including painting of fittings and brackets, cutting and making good the walls,floors,slabs wherever required, testing and commissioning to the satisfaction of Engineer in Charge:The rate is including cost and conveyance of all materials, labour charges, lead,lift etc complete as directed by the Engineer in charge at all levels(The purchase price(inclusive of all taxes) of SS sink is Rs.18855/-.,CP brass sink cock(2 nos) is Rs .1662/-., waste coupling-Rs 510/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 1 year and only skilled and experienced persons shall be employed for this purpose.
2
-
-
SH:INTERNAL AND EXTERNAL SANITARY
-
-
-
Providing and fixing cleanout including cost and conveyance of all materials labour charges ,lead, lift, cutting and making good the walls and floors etc complete testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in Charge at all levels.(The purchase price(inclusive of all taxes) cleanout Rs .430/-. and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
20
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge: 110mm OD (6 kg/cm2)
68
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge: 75mm OD(6kg/cm2)
55
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge: 50mm OD(6 kg/cm2)
20
-
-
Supplying, fixing, testing and commissioning to the satisfaction of Engineer in charge of PVC gully trap of size 160 x 110mm and CI grating 150mmx150mm size and water tight C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning ,installing and testing approved make PVC gully trap with 160mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with CI grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge.
5
-
-
Providing and fixing PVC vent cowl to pipe already fixed as directed by Engineer-in-Charge at all levels.: 75 mm dia
15
-
-
Providing and fixing PVC vent cowl to pipe already fixed as directed by Engineer-in-Charge at all levels.: 110 mm dia
10
-
-
Providing and fixing PVC vent cowl to pipe already fixed as directed by Engineer-in-Charge at all levels.: 160 mm dia
5
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of hard PVC pipes with PVC specials such as tees, bends, door bends, door tees, elbows, unions, etc. with clamps including earth work, refilling, testing the lines rectifying any leakages or defects, etc., complete as directed by the Engineer-in-charge for soil, waste, rain water pipe, etc. for underground lines: 160mm dia (6 kg/cm2)
50
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of hard PVC pipes with PVC specials such as tees, bends, door bends, door tees, elbows, unions, etc. with clamps including earth work, refilling, testing the lines rectifying any leakages or defects, etc., complete as directed by the Engineer-in-charge for soil, waste, rain water pipe, etc. for underground lines: 160mm dia (6 kg/cm2): 110mm dia (6 kg/cm2)
65
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of hard PVC pipes with PVC specials such as tees, bends, door bends, door tees, elbows, unions, etc. with clamps including earth work, refilling, testing the lines rectifying any leakages or defects, etc., complete as directed by the Engineer-in-charge for soil, waste, rain water pipe, etc. for underground lines: 160mm dia (6 kg/cm2): 75mm dia (6 kg/cm2)
11.8
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of hard PVC pipes with PVC specials such as tees, bends, door bends, door tees, elbows, unions, etc. with clamps including earth work, refilling, testing the lines rectifying any leakages or defects, etc., complete as directed by the Engineer-in-charge for soil, waste, rain water pipe, etc. for underground lines: 160mm dia (6 kg/cm2): 75mm dia (6 kg/cm2) : 50mm dia (6 kg/cm2)
11.8
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge.: 110mm dia (6 kg/cm2)
25
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge.: 75mm dia(6 kg/cm2)
20
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge.: 50mm dia(6 kg/cm2)
20
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge.: 75mm dia(4 kg/cm2)
35
-
-
Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 Cement : 4 coarse sand) R.C.C. top slab with 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete with 1:4:8 mix (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 Cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer-in-Charge
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With bricks.Class designation 75
3
-
-
Extra for depth for manholes.: Size 90 x 80 cm. With bricks.Class designation 75
1
-
-
SH:INTERNAL AND EXTERNAL WATER SUPPLY
-
-
-
Providing and fixing C.P. brass concealed stop cock (control valve) of standard design and of approved make conforming to IS:8931.The rate is including cost and conveyance of all materials, labour charges, lead,lift,cutting and making good the walls,floors,slab etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in charge at all levels.(The purchase price(inclusive of all taxes) of C.P. brass concealed stop cock (control valve) is Rs..1485/-. and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose: 15 mm nominal bore.
7
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of Chlorinated Polyvinyl chloride(CPVC) SDR 11 pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipes with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete.The rate is including cost and conveyance of all materials, labour charges, sundries,lead,lift,all taxes etc complete as per the direction of Engineer in charge at all levels.(Concealed work including cutting chases and making good the walls etc).: 40mm OD
5
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of Chlorinated Polyvinyl chloride(CPVC) SDR 11 pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipes with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete.The rate is including cost and conveyance of all materials, labour charges, sundries,lead,lift,all taxes etc complete as per the direction of Engineer in charge at all levels.(Concealed work including cutting chases and making good the walls etc).: 32mm OD
38
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of Chlorinated Polyvinyl chloride(CPVC) SDR 11 pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipes with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete.The rate is including cost and conveyance of all materials, labour charges, sundries,lead,lift,all taxes etc complete as per the direction of Engineer in charge at all levels.(Concealed work including cutting chases and making good the walls etc).:25mm OD
25
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of Chlorinated Polyvinyl chloride(CPVC) SDR 11 pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipes with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete.The rate is including cost and conveyance of all materials, labour charges, sundries,lead,lift,all taxes etc complete as per the direction of Engineer in charge at all levels.(Concealed work including cutting chases and making good the walls etc).: 20mm OD
15
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels: 80 mm dia nominal bore
1
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels: 65 mm dia nominal bore
2
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels: 50 mm dia nominal bore
2
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels:40 mm dia nominal bore
2
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels:32 mm dia nominal bore
2
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels: 25 mm dia nominal bore
2
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels: 20 mm dia nominal bore
8
-
-
Providing and laying non-pressure NP2 class (medium duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete: 100 mm dia R.C.C. pipe
10
-
-
WIRING AND ACCESSORIES
-
-
-
Supply of 20mm dia medium duty ISI marked PVC conduit including all accessories like bends, junction boxes, couplers, saddles etc as detailed in technical specification.
333
-
-
Laying of 20mm dia PVC conduit along with accessories like PVC bends,couplers,junction box,fastners, iron staples/saddles/screws,in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit as required complete as detailed in technical specification.
1295
-
-
Supply of 20mm dia corrugated good quality flexible PVC conduit along with adaptors and all other accessories as required complete.
20
-
-
Laying of 20mm dia corrugated good quality flexible PVC conduit along with adaptors and all other accessories as required complete.
42
-
-
Supply of 25mm dia medium duty ISI marked PVC conduit including all accessories like bends, junction boxes, couplers, saddles etc as detailed in technical specification.
49
-
-
Laying of 25mm dia PVC conduit along with accessories like PVC bends,couplers,junction boxes,fastners, iron staples/saddles/screws,in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit as required complete as detailed in technical specification.
300
-
-
Supply of 2.5sqmm FRLSH single core PVC insulated multistranded copper wire as detailed in technical specification.
200
-
-
Drawing of 2.5sqmm FRLSH single core PVC insulated multistranded copper wire in existing conduit as detailed in technical specification.
750
-
-
Supply of 4sqmm FRLSH single core PVC insulated multistranded copper wire as detailed in technical specification.
250
-
-
Drawing of 4sqmm FRLSH single core PVC insulated multistranded copper wire in existing conduit as detailed in technical specification.
450
-
-
Supply of 6sqmm FRLSH single core PVC insulated multistranded copper wire as detailed in technical specification.
80
-
-
Drawing of 6sqmm FRLSH single core PVC insulated multistranded copper wire in existing conduit as detailed in technical specification.
80
-
-
Supply of 1.5sqmm FRLSH single core PVC insulated multistranded copper wire as detailed in technical specification.
300
-
-
Drawing of 1.5sqmm FRLSH single core PVC insulated multistranded copper wire in existing conduit as detailed in technical specification.
4730
-
-
Supply of 6A modular type, one way switch with suitable GI box, front plate, metal box and all other accessories as required complete
30
-
-
Fixing 6A modular type one way switch with suitable GI box,front plate & metal box on surface or in recess including inter connections cutting the wall if required, making good the surface etc. as required complete.
30
-
-
Supply of 6A modular type, 5pin plug socket with suitable GI box, front plate, metal box and all other accessories as required complete.
45
-
-
Fixing of 6A modular type, 5pin plug socket with suitable GI box, front plate &metal box on surface or in recess including inter connections cutting the wall if required, making good the surface etc. as required complete.
45
-
-
Supply of 16A modular type one way switch with suitable GI box,front plate, metal box and all other accessories as required complete.
18
-
-
Fixing of 16A modular type one way switch with suitable GI box,front plate &metal box on surface or in recess including inter connections cutting the wall if required, making good the surface etc. as required complete.
18
-
-
Supply of 16A modular type, 6pin plug socket switch with suitable GI box,front plate, metal box and all other accessories as required complete.
18
-
-
Fixing of 16A modular type ,5pin plug socket with suitable GI box, front plate &metal box on surface or in recess including inter connections cutting the wall if required, making good the surface etc. as required complete.
18
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connectionsincluding modular plate etc. as required..Bell push
1
-
-
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required
1
-
-
SUPPLY AND LAYING OF CABLE
-
-
-
Supply of 1.1 KV grade XLPE insulated, PVC sheathed, armoured 4C 4Sq.mm Copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
22
-
-
Supply and Making end termination with brass compression gland and Copper lugs for 4C 4 Sq.mm Cu of XLPE insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
2
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable Upto 35 sq. mm (clamped with 1mm thick saddle) of 1.1 KV grade on wall or surface as required.
144
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm
250
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Upto 35 sq. mm
20
-
-
Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Upto 35 sq. mm
20
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm
50
-
-
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
120 mm dia (OD-120 mm & ID-103 mm nominal)
250
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
150 mm width X 50 mm depth X 1.6 mm thickness
50
-
-
MCBs AND MCB DISTRIBUTION BOARDS
-
-
-
Supply of 16 way double door, single pole and neutral, sheet steel, powder coated, MCB distribution board, 240 volts, complete with tinned copper busbars, neutral link, earth bar, din bar, knockouts, interconnections, earth studs etc. as required (IP 42/43 type).
2
-
-
ITC of of 16 way double door, single pole and neutral, sheet steel, powder coated, MCB distribution board, fixing required number of SP/DP MCBs, RCCBs, Blanking plates,cable entry box, etc complete with all other accessories including cutting the wall if required ,finishing ,making good the same etc complete.
2
-
-
Supply of 8way (8 + 24) double door, three pole and neutral, sheet steel, powder coated, horizontal MCB distribution board, 415 volts, complete with tinned copper busbars, neutral link, earth bar, din bar, knockouts, interconnections, earth studs etc. as required suitable for single phase out goings and separate cut-out for 4P RCCB and 4P MCB for incoming etc. as required and as per specification (IP 42/43 type).
1
-
-
ITC of 8 way (8+24) double door, three pole and neutral, sheet steel, powder coated, horizontal MCB distribution board, 415 volts, fixing required number of TP/FP MCBs, RCCBs, Blanking plates,cable entry box, steel fasteners etc complete with all other accessories including MS supports or cutting the wall if required ,finishing ,making good the same etc complete.
1
-
-
Supply of 6 amps. to 32 amps. ratings , SP MCB, "C" curve, 10 KA breaking capacity
57
-
-
Supply of 6 amps to 32 amps rating, 415 volts,Four pole “C” curve, miniature circuit breaker.
1
-
-
Supply of 4 pole 25amps. (415 Volts), 30mA sensitivity. residual current circuit breaker (RCCB).
1
-
-
Supply of 2 pole 25 amps. (240 Volts), 30mA sensitivity. residual current circuit breaker (RCCB).
2
-
-
Supply of 6 amps. to 32 amps. ratings , DP MCB, "C" curve, 10 KA breaking capacity
2
-
-
Fixing of 6A to 63A MCB in existing MCB DB SP/DP/TP/FP
60
-
-
Fixing of RCCB in existing MCB DB, DP/FP
3
-
-
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
5
-
-
LIGHT FIXTURES AND FANS
-
-
-
Supply of LED recess mounted down light made of die cast aluminium, along with driver,surge protection, maximum system wattage of 9Watts, CCT- 5700K with lumen output of lamp greater than 900 lumens, power factor 0.95, rated life of L70 @ 50,000 hours, system efficacy greater than 100 lumen/ watt and including all necessary accessories as required complete. Make:Wipro LD06-111-XXX-57-XX or equivalent approved make
Note: The CCT shall be in accordance with the aesthetic of the building or as directed by the Engineer in charge)
57
-
-
Supply of wall lights for aesthetical purpose made of Metal/ Aluminium and shade approved by the engineer in charge with power consumption of maximum 10W with 850lumen/WW( Make: Philips Model No582009 or equivalent approved make)(The purchase price considered for the item is Rs. 3334/-, inclusive of all transportation and OH profit. Any deviation plus or minus in the purchase price in approved shade will be adjusted (paid extra or deducted) in the payment making to contractor)
8
-
-
Supply of surface mounted LED batten with aluminium housing and PolyCarbonate Diffuser, along with driver and surge protection, with maximum system wattage of 10 Watts, luminous efficacy greater than or equal to100lumen/watt, system output = 1000lm,power factor 0.9, rated life of L70 @ 35,000 hours,CRI 80 and including all necessary accessories as required complete.
(Make:- Philips BN021C LED12S or LT94054200 orequivalent approved make)
25
-
-
Supply of mirror wall lights with MS polycarbonate diffuser and power consumption of maximum 10W with 1000lumen( Make: Philips Meraki Model No 582108 or equivalent approved make)
Note: The CCT shall be in accordance with the aesthetic of the building or as directed by the Engineer in charge)
2
-
-
Supply of industrial surface mounted LED batten (with lamp) with Extruded Aluminium housing and PolyCarbonate Diffuser, along with driver and surge protection, with maximum system wattage of 40 Watts, luminous efficacy greater than or equal to110lumen/watt, system output = 4400lm, power factor 0.9, rated life of L70 @ 50,000 minimum hours,CRI 80 and including all necessary accessories as required complete.
Test Reports and 5 year warranty certificate for this item and related credentials shall be submitted.
(Make:-Wipro LL24-541-XXX-57-XX or equivalent approved make)
9
-
-
Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required.
9
-
-
Supply of LED bollard, IP 65, made out of diecast Aluminium /MS, antirust treated, with polyurethane coating required foundation bolts and base plate, of height 1 (+/-0.5)m prewired with terminal connectors for loop-in-loop-out.
The item includes LED module, along with driver of approved make, system wattage of 10+/-2W, with efficacy greater than 60,with THD10%, power factor 0.9,rated life of L70 @ 50,000 hours,CCT 3000K, with CRI =80, with all necessary accessories as required complete.
(Make:- Luminaire Philips BCP151 LED150/WW PSU 220-240V 7043 or LT Primus R other equivalent makes
Note: The CCT shall be in accordance with the aesthetic of the building or as directed by the engineer in charge)
4
-
-
Spike Light
Supply of IP65 LED luminaire with painted die cast aluminium body with stainless steel mounting bracket to adjust the aiming angle, The item includes LED module along with driver of approved make, each with maximum system wattage of 10W, system efficacy shall be 80lm/W, power factor 0.9,rated life of L70 @ 50,000 hours, CCT 3000K, with CRI = 70, beam angle /= 60deg,degree, prewired with all necessary accessories and interconnections as required complete.
(Make:Philips BGP150 LED520/WW 8W or LT AOP0001057NDEKP040 or approved equivalent make)
21
-
-
Outdoor LED Strip Supply of LED strip of maximum wattage 10watt per meter, /=3000Kor as specified by the site in charge, IP44 or above ,efficay90lm/ W, lumen maintenance of L70 @ 50,000 burning hours prewired complete with all necessary accessories as required. (Make:- YYZ LFX-0-04.80-CTXX-2835-Z3-120-24-CV-10 OR LT MAZE STRIP or Philips LS170S LED12 827 equivalent approved make )
200
-
-
Supply of 10-12 mm Aluminium profile with PMMA diffuser , channel casing complete with all necessary accessories.Make LT :Maze Neon Flex 12x12mm or Philips model or equivalent approved make)
200
-
-
Supply of 12V 150W outdoor rated (IP 65) driver for Striplight with all necessary accessories as required complete. (Make:- ELG-150-12 or LT make or equivalent approved make )
20
-
-
Supply of LED strip of maximum wattage 10 watt per meter, /=3000K, IP20 along efficacy100lm/ W, CRI90, lumen maintenance of L70 @ 50,000 burning hours prewired complete with all necessary accessories as required. Test Reports and 5 year warranty certificate for this item and related credentials shall be submitted
Make:Philips :LS170S LED12 827 IP20 L5000 PRO or YYZ- LFX-I-09.60-CT30-2835-Z5-120-24-CV-10- or LTMAZESTI50W12V3000P
144
-
-
Supply of 12/24V 100W driver for Strip light with all necessary accessories as required complete. Test Reports and 5 year warranty certificate for this item and related credentials shall be submitted.
(Make: Meanwell -LRS 100W 24v or DSO10012VE0 12V, 100W Constant Voltage DC Driver)
18
-
-
Supply of 10-12 mm Aluminium profile with PMMA diffuser , channel casing complete with all necessary accessories.Make LT :Maze Neon Flex 12x12mm or Philips modelor equivalent approved make)
144
-
-
Supply of ceiling mounted Highbay LED fixture with high Pressure die cast aluminium housing and Diffuser ,along with driver,system wattage of maximum 100 Watts ,lumen output of lamp not less than 14000 lumen, power factor >= 0.9,rated life of L70 @ 50,000 minimum hours, system efficacy greater than or equal to 140 lumen/watt,with a minimum inbuilt surge protection of 6kV, CRI 70, CCT 5700K and including all the necessary accessories as required complete(.Make:- Wipro LH21-122-090-57-X2 or equivalent approved make.)
15
-
-
Supply of 450 mm sweep,1400 rpm heavy duty exhaust fan in metal body with self opening louvers working on 230 V AC supply complete with all accessories as required.
1
-
-
ITC LIGHT FITTINGS AND FANS
-
-
-
Installation, testing and commissioning of pre-wired, LED fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLSH PVC insulated, copper conductor, single core cable and earthing etc. as required.
36
-
-
Installation, testing and commissioning of LED down lighter fittings on false ceiling with all mounting accessories as required complete including interconnections using 3 runs of 1.5 sqmm FRLSH PVC insulated stranded copper conductor as required.
57
-
-
Installation, testing and commissioning of wall light fitting , complete with all accessories,lamps, drivers etc. directly on wall, including connection with 1.5 sq. mm FRLSH PVC insulated, copper conductor, single core cable and earthing etc. as required.
29
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
9
-
-
Installation, testing and commissioning of mini chandelier , including fixing and wiring the down rods with 3C1.5 sq. mm FRLSH PVC insulated, copper conductor, cable and earthing etc. as required.
14
-
-
Installation, Testing and Commissioning of LED strip in the profile with required drivers including proper cutting and fixing of LED strip with power supply unit, interconnection in wall/surface/ceiling,all necessary mounting acessories complete the installation.
444
-
-
Installation, testing and commissioning of Bollards , including fixing and wiring the down rods with 3C1.5 sq. mm FRLSH PVC insulated, copper conductor, cable and earthing etc. as required.
4
-
-
Shifting of the existing LED down lighter fittings on false ceiling including all mounting accessories as directed by the site in charge.
30
-
-
Numbering of ceiling fan / exhaust fan/ fluorescent fitting as required.
45
-
-
Shifting of existing fixtures, Installation, testing and commissioning of High bay/LED/ T5 FLOOD type fittings on wall/Column/truss/false ceiling using suitable MS clamps, nuts, bolts including connections with 3C 1.5 Sq.mm PVC insulated flexible copper conductor cable as required.
15
-
-
EARTHING
-
-
-
Earthing with C.I earth plate 1200 mm X 1200 mm X 12 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
Supplying and laying 50mm X 6mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
-
-
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required : 10 SWG Cu
760
-
-
VENTILATION WORKS
-
-
-
Supply, Installation, Testing and Commissioning of Double skin Energy Recovery Ventilator units with HRW of minimum 2000 CFM capacity ,outlet/inlet volume control dampers, canvas connections, EC fan/Plug fan, TEFC drive motor of minimum efficiency class IE3 , 3-Ph induction motor, all housed inside housing of a double skin construction with vibration isolation arrangement, VFD for Supply and Return Air motors and starter panel, Power wiring ,control wiring, complete in all respects as per the technical specifications with minimum 25mm external static pressure.
2
-
-
Supply, Installation, testing and commissioning of factory fabricated machine made GSS sheet metal ducting complete with neoprene gaskets, elbows, splitter dampers, vanes, hangers, supports etc. for Supply air, Return air, Exhaust Air, Fresh Air as per ducting specifications and with suitable supports using MS angles, channels, rods, anchor bolts, etc. to roof /truss as per IS 655 / SMACNA standards complete in all respects as per the technical specifications.
Ducting:0.63 mm (24 Gauge)
236
-
-
Supply, Installation, testing and commissioning of factory fabricated machine made GSS sheet metal ducting complete with neoprene gaskets, elbows, splitter dampers, vanes, hangers, supports etc. for Supply air, Return air, Exhaust Air, Fresh Air as per ducting specifications and with suitable supports using MS angles, channels, rods, anchor bolts, etc. to roof /truss as per IS 655 / SMACNA standards complete in all respects as per the technical specifications.
Ducting:0.80 mm (22 Gauge)
28
-
-
Supply, Installation , testing and commissioning of powder coated extruded aluminium Supply Air Grilles with aluminium volume control dampers complete in all respects as per the technical specifications.
5
-
-
Supply, Installation , testing and commissioning of powder coated extruded aluminium Return Air Grilles with louvers but without volume control dampers complete in all respects as per the technical specifications.
24
-
-
Supply, Installation , testing and commissioning of Aluminium extruded exhaust air louvers ,bird screen etc. complete in all respects as per the technical specifications.
2
-
-
Supply, Installation , testing and commissioning of Aluminium extruded fresh air louvers with fresh air damper, bird screen etc. complete in all respects as per the technical specifications.
2
-
-
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, complete
in all respects as per the technical specifications.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements