Cochin International Airport Limited Tender

Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.

Cochin International Airport Limited - CIAL Tender

Works

Civil And Construction

Building Construction

Eprocure

Ernakulam, Kerala

Opening Date3 Jul 2024

Closing Date21 Aug 2024

Tender Amount₹ 27,43,00,000

Notes

Download

Costs

EMD
₹ 20,00,000
Document Cost
₹ 5,900
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2024_CIAL_679043_1
Bid Award Id
View
Tender No
CIAL/CIVIL/613B/E21
Tender Authority
Cochin International Airport Limited View
Purchaser Address
-
Website
http://https://cial.aero/

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Download All

Tender Notice-1542.1 kBTendernotice_1.pdf

NIT

BOQ-3797.2 kBBOQ_1055981.xls

BOQ

BOQ-2786.4 kBBOQ_1055981.xls

BOQ-1733.2 kBBOQ_1055981.xls

Corrigendum-114.3 MBCorrigendum06.pdf

18 More

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil, disposed of the earth to be levelled and neatly dressed within the site as directed by the Engineer-in-Charge. but for every additional lift of 3m to 4.5m or part thereof. The rate quoted should be inclusive of dewatering. All kinds of soil.

Quantity186.4

Rate-

Amount -

Earth work in excavation by means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth. and 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil, disposed earth to be levelled and neatly dressed within the site as directed by the Engineer-in-Charge. but for every additional lift of 4.5m to 6m or part thereof.The rate quoted should be inclusive of dewatering. All kinds of soil.

Quantity35.75

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.The rate quoted should be inclusive of dewatering. All kinds of soil

Quantity10

Rate-

Amount -

Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.

Quantity201.36

Rate-

Amount -

Back filling in plinth , or trenches, under floors, in areas with crusher sand including watering, ramming, consolidating and dressing including cost and conveyance of all materials, labour charges, lead, lift etc. complete at all levels as directed by the Engineer-in-Charge

Quantity1683.58

Rate-

Amount -

Filling in plinth or trenches underfloors, foundations in areas etc with red earth in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity1056.29

Rate-

Amount -

Carriage of materials by mechanical transport including loading, unloading and stacking lead up to 5 km, including all lifts involved as directed by the Engineer-in-Charge. Excavated Earth

Quantity4.19

Rate-

Amount -

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity72.5

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity780.14

Rate-

Amount -

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5 km for all lifts, complete as per directions of Engineer-in-charge.Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more.

Quantity1462.68

Rate-

Amount -

Installation of shoring for the proposed work upto 1.5 m depth using appropriate material including machineries, labour, lead, lift etc complete as per specifications and as directed by the Engineer-In-Charge. The design of shoring shall be approved by the Engineer-In-Charge prior to execution.Measurement shall be made for the area of soil face retained.

Quantity3.94

Rate-

Amount -

Installation of sheet pile as per IS 2314 using sheet thickness not less than 6 mm and sufficient numbers of stiffness for supporting soil up to depth of 3.00 meters including conveyance, labour, cost of all materials, driving and removal at locations wherever required. etc complete. as per specification & direction of Engineer-in-charge.(The method of Measurement shall be in Sq.Mtr). The Contractor has to submit shop drawing for approval, prior to the Work.- Sheet piling up to 3.0 m depth

Quantity459.59

Rate-

Amount -

Installation of sheet pile as per IS 2314 using sheet thickness not less than 6 mm and sufficient numbers of stiffness for supporting soil of depth of 3.00 - 6.00 meters including conveyance, labour, cost of all materials, driving and removal at locations wherever required. etc complete. as per specification & direction of the Engineer-in-charge. (The method of Measurement shall be in Sq.Mtr). The Contractor has to submit shop drawing for approval, prior to the Work.- Sheet piling from 3 to 6 mtr depth

Quantity131.84

Rate-

Amount -

Providing and applying Antitermite treatement by injecting chemical emulsion Imidacloprid emulsiable concentrate .075% for pre-constructional treatement and creating a chemical barrier as per IS 6313 (Part ll) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building, etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge.(Plinth area only to be measured for the payment ) (The above work shall be carriedout by an agency having sufficient experience and should ensure a warranty for a period of 10 years. Only skilled and experienced persons shall be employed for this purpose.)

Quantity3683.35

Rate-

Amount -

SH: CONCRETE WORK Providing and laying autoclaved aerated cement blocks filling with 150mm/230mm/300 mm thick AAC blocks laying in sunken portion with approved block in cement mortar 1:4 ,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity71.03

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity610.41

Rate-

Amount -

Providing and laying cement concrete of specific grade properly mixed and consolidated and finished using power troweller, including cost and conveyance of all materials, labour, curing, lead lift, etc. complete as directed by Engineer-in-Charge at all levels. For screed concrete 1:2:4 (1 Cement: 2coarse sand : 4 graded stone aggregate 6mm nominal size) - All work up to plinth level

Quantity14.46

Rate-

Amount -

Providing and laying rubble as soling layer on the sump bed up to PCC bottom, 30 cm thick in required profile including cost of all material, labour, dewatering, preparation of bedding surface, filling the voids with stone screens and compacting with excavator etc. as directed by Engineer-in -charge

Quantity188.29

Rate-

Amount -

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification all complete including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity267.88

Rate-

Amount -

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size) all complete including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity326.47

Rate-

Amount -

Extra for laying reinforced cement concrete in or under water and / or liquid mud, including cost of pumping or bailing out water and removing slush etc., complete. The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in cubic metre executed under subsoil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub - soil water conditions.

Quantity201.36

Rate-

Amount -

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of 40 mm nominal size aggregate and 100mm crusher sand filling, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity399.63

Rate-

Amount -

Quantity401.79

Rate-

Amount -

SH: REINFORCED CEMENT CONCRETE WORK Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying, admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability but excluding the cost of centering, shuttering and reinforcement, as per direction of Engineer-in-charge. Note :- Cement content considered in this item is @ 400 kg/cum. All works upto plinth level

Quantity1022.08

Rate-

Amount -

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying, admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability but excluding the cost of centering, shuttering and reinforcement, as per direction of Engineer-in-charge. Note :- Cement content considered in this item is @ 400 kg/cum. All works above plinth level upto floor V level

Quantity1216.54

Rate-

Amount -

Providing and laying in position machine batched, machine mixedand machine vibrated design mix cement concrete of M30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying, admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability but excluding the cost of centering, shuttering and reinforcement, as per direction of Engineer-in-charge. Note :- Cement content considered in this item is @ 410 kg/cum. All works upto plinth level

Quantity607.68

Rate-

Amount -

Quantity471.79

Rate-

Amount -

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in rectangular cover on drains, string courses, bands, copings, bed plates, anchor blocks etc including the cost of required centering, shuttering but , excluding cost of reinforcement, with M-25 grade cement concrete for RCC work, all complete as per direction of Engineer-in-Charge.

Quantity10

Rate-

Amount -

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more, all complete including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity162191.37

Rate-

Amount -

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more, all complete including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity179892.2

Rate-

Amount -

Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity1252.18

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for all heights :Suspended floors, roofs, landings, balconies and access platform including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity2742.81

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for all heights :: Columns, Pillars, Piers, Abutments, Posts and Struts including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity3048.01

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity4243.32

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for all heights :Vertical and horizontal fins individually or forming box louvers band,facias and eaves boards including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity20

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for all heights :Edges of slabs and breaks in floors and walls under 20 cm wide including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity1673.36

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity181.88

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Weather shade, Chajjas, corbels etc. including edges including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity91.61

Rate-

Amount -

Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity1884.95

Rate-

Amount -

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity2332.94

Rate-

Amount -

SH : MASONRY WORK Providing and constructing Solid concrete block masonry M-10 grade in C.M1:6 (1cement, 6 coarse sand) with Solid blocks of 30x20x10 cm size or nearest and approved quality including scaffolding, raking out of joints,curing, cost and conveyance of all materials,labour, lead, lift, etc. complete for all types of masonry works in super structure above the highest plinth level as directed by Engineer-in-Charge at all levels.

Quantity1022.22

Rate-

Amount -

Providing and constructing Solid concrete block masonry M-10 grade in C.M 1:6 (1cement, 6 coarse sand) with Solid blocks of 30x20x15 cm size or nearest and approved quality including scaffolding, raking out of joints,curing, cost and conveyance of all materials,labour, lead, lift, etc. complete for all types of masonry works below plinth level as directed by Engineer-in-Charge at all levels.

Quantity143.16

Rate-

Amount -

Providing and constructing Solid concrete block masonry M-10 grade in C.M1:6 (1cement, 6 coarse sand) with Solid blocks of 30x20x15 cm size or nearest and approved quality including scaffolding, raking out of joints,curing, cost and conveyance of all materials,labour, lead, lift, etc. complete for all types of masonry works in super structure above the plinth level as directed by Engineer-in-Charge at all levels.

Quantity1217.3

Rate-

Amount -

Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/300 mm thick AAC blocks (having compressive strength 3-5N/mm2) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Quantity72.03

Rate-

Amount -

SH : STEEL WORK Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Quantity2922.3

Rate-

Amount -

Providing & fixing of external grade wooden finished powder coated non polish SS 304 grade handrail.Top & vertical members are ss square tubes of size 50x50x2.5mm supported by the base plate of 5mm thick fixed to the floor using anchor fasteners & intermediate horizontal members are ss square tubes 40x40x2 mm .The members are connected by welding.Top & Bottom members connected with synthetic hemp rope of 1cm dia , all complete as per the approved design / architectural drawing and approval of Engineer-in-charge. Rate is inclusive of all material,assembling, errection, welding, curvaturing, grinding, buffling,anchor fasteners, etc ,other accessories etc complete.-Railing Height – 1000mm from FFL-Stair and Ramp Handrail

Quantity41.69

Rate-

Amount -

Providing and fixing railing with bottom aluminium channel of size 120 mm x 42 mm (5.35 KG/Mtr) of approved brand and Top Rail with SS304 Grade of size 40 x 40 x 2 mm (IM055T/equivalent)and 12 mm thick Toughened clear glass is fixed to the groove with EPDM gasket, The bottom section is fixed to the floor using Hilti/Fischer or Equvalent Chemical Anchor Bolt, The rate is including welding, grinding, buffing, polishing and fixing the railing with necessary accessories of required size, all complete as per the approved design / architectural drawing and approval of Engineer-in-charge.Railing Height – 1000 mm from FFL-Balcony Rail

Quantity77.18

Rate-

Amount -

Structural steelwork in built up tubular, trussess and framed work including cutting, hoisting, fixing in position and applying protective coating on external steel structures two coats of aliphatic polyurethene of 35 microns each per coat with not less than 45% volume solids and DFT of 35 micron each over a base coat of fast drying, high solids two pack epoxy coating not less than 80% volume solids of DFT 130 microns with primer coat of two pack epoxy not less than 71% volume solids and a DFT of 50microns or equivalent.All steel surface to be cleaned throughly with strong detergents and high pressure fresh water to remove oil, grease, salt and contaminations. All areas to be blast cleaned to Sa 2.5(ISO8501- 1:2007) before applying primer The rate shall including cost and conveyance of all materials, labour charges, lead, lift etc complete as directed by Engineer-in-Charge at all levels. (Protective coating on external steel structure shall be measured and paid separately)

Quantity202832.49

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses, puff pannelled roof, staircase, handrail etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. Electric resistance or induction butt welded tubes

Quantity22945.13

Rate-

Amount -

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Quantity57413.1

Rate-

Amount -

Structural steel works such as tees,angles,channels,RS joints,MS Steel plates, MS riverts riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in positionand applying a priming coat of approved steel primer using structural steel etc. as required. all complete including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Quantity1111.65

Rate-

Amount -

Providing and fixing foundation bolts including nuts and washers complete as per standards including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Quantity1860

Rate-

Amount -

Providing and fixing of Motorised, electrically perforated Rolling Shutter, powder coated finish constructed of galvanized steel slats, guide rails and bottom profile,Mild steel roller cage assembly,side brackets with bearings, Imported make automation system, hardware and accessories with 2 hour Fire Rating. The Slat Curtain with High Grade Special quality galvanized steel interlocked slats as per BS standards and designed edge end lock to achieve maximum holding strength.Bottom Plate with Structured galvanized steel L shaped section welded with angle stiffener/heavy tubes 35 x 35 x 5 mm. Side Guides with Specially designed box type galvanised steel side guides 3.0mm thk surface mounted type should guide the slat curtain smoothly.BracketPlate: Mild Steel bracket plate minimum 3.0 mm thk .Bracket plate dimensions vary as per size of shutter. Load of shutters transfers through brackets.Roller Shaft: Heavy-Duty, Italian motors with inbuilt reductiongears, In built mechanical limit units and thermal protector. Special added a provision for manual override in case of power failure.The rate is including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. Size of the opening: 380 cm x 410 cm

Quantity40.76

Rate-

Amount -

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 ,M.S. top cover of required thickness for rolling shutters and one coat primer.80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Quantity25.52

Rate-

Amount -

Providing and fixing ball bearing for rolling shutters, including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Quantity6

Rate-

Amount -

Providing material and labour for fixing G.I. hexagonal chickenmesh of size 20mm x 20mm of 22 gauge at junction of concrete and brick work or between different materials after making "V" grove between two different material surface and filled with rich cement mortar and @ 100mm on each side of surfaces including necessary "U" nails/ screws/ washers with cleats for fixing, overlaps, curing, scaffolding etc complete for all floors/ all levels/ all heights/ all shapes including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Quantity190

Rate-

Amount -

SH : JOINERY WORKS Providing and fixing aluminium work for wood finish 2-Track 2-Shutter sliding glazed Windows comprising of aluminium multi- chambered frame with in-built roller track and sash extruded profiles of 55 mm x 41 mm Sliding Track,37 mm x 62 mm Shutter (1.2 mm thickness) using (1,2) 21 MM Dgu Toughened Glass-(5 MM Tg+10 MM Airgap +6 MM Tg) or required thickness (Saint Gobain / Equivalent).Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24. including cost and conveyance of all materials, labour charges etc as per drawing. complete at all levels as directed by Engineer-in-charge W1(100 x 180cm)

Quantity1.8

Rate-

Amount -

Providing and fixing aluminium work for wood finish 2-Track 2-Shutter sliding glazed Windows comprising of aluminium multi- chambered frame with in-built roller track and sash extruded profiles of 55 mm x 41 mm Sliding Track,37 mm x 62 mm Shutter (1.2 mm thickness) using (1,2) 21 MM Dgu Toughened Glass-(5 MM Tg+10 MM Airgap +6 MM Tg) or required thickness (Saint Gobain / Equivalent).Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24. including cost and conveyance of all materials, labour charges etc as per drawing. complete at all levels as directed by Engineer-in-charge W1a(100 x 120 cm)

Quantity9.6

Rate-

Amount -

Quantity2.7

Rate-

Amount -

Quantity3.6

Rate-

Amount -

Quantity9.6

Rate-

Amount -

Providing and fixing aluminium work for wood finish fixed windows extruded profiles of Outer Frame 60 mm x 50 mm, 51 mm x 73 mm Mullion (1.2 mm thickness) . Using, 6 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent).Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24.including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge W4 (Size : 150 x 480cm)

Quantity28.8

Rate-

Amount -

Quantity51.6

Rate-

Amount -

Providing and fixing aluminium work for wood finish 2-Track 2-Shutter sliding glazed doors comprising of aluminium multi- chambered frame with in-built roller track and sash extruded profiles of 55 mm x 41 mm Sliding Track, 37 mm x 62 mm Shutter (1.2 mm thickness) using (1,2) 21 MM Dgu Toughened Glass-(5 MM Tg+10 MM Airgap +6 MM Tg) or required thickness (Saint Gobain / Equivalent).Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24. including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge SD (Size : 230 x 240cm)

Quantity115.92

Rate-

Amount -

Providing and fixing aluminium work for wood finish Open windows with extruded outer frame section 60 mm x 50 mm, Shutter 100 mm x 60 mm, 73 mm x 51 mm (1.2 mm thickness).Using, 6 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent). Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24. all complete as per architectural drawings and the directions of Engineer-in-charge. DD (Size : 60 x 60cm)

Quantity3.78

Rate-

Amount -

Providing and fixing aluminium work for wood finish fixed windows extruded profiles of Outer Frame 60 mm x 50 mm, 51 mm x 73 mm Mullion (1.2 mm thickness) . Using, 6 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent). Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust-free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24. all complete as per architectural drawings and the directions of Engineer-in-charge. V1 (Size : 120 x 60cm)

Quantity7.56

Rate-

Amount -

Quantity0.54

Rate-

Amount -

Quantity4.32

Rate-

Amount -

Providing and fixing aluminium work for wood finish 2-Track 2-Shutter sliding glazed Windows comprising of aluminium multi- chambered frame with in-built roller track and sash extruded profiles of 55 mm x 41 mm Sliding Track,37 mm x 62 mm Shutter (1.2 mm thickness) using 6 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent). Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24. including cost and conveyance of all materials, labour charges etc as per drawing. complete at all levels as directed by Engineer-in-charge W2 ( 120 x 120 cm )

Quantity1.44

Rate-

Amount -

Providing and fixing aluminium work for wood finish 2-Track 2-Shutter sliding glazed Windows comprising of aluminium multi- chambered frame with in-built roller track and sash extruded profiles of 55 mm x 41 mm Sliding Track,37 mm x 62 mm Shutter (1.2 mm thickness) using 6 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent). Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24. including cost and conveyance of all materials, labour charges etc as per drawing. complete at all levels as directed by Engineer-in-charge W3 ( 180 x 120 cm )

Quantity4.32

Rate-

Amount -

Providing and fixing aluminium work for wood finish fixed windows extruded profiles of Outer Frame 60 mm x 50 mm, 51 mm x 73 mm Mullion (1.2 mm thickness) . Using, 8 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent).Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24.including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge W5 ( 450 x 140 cm )

Quantity6.3

Rate-

Amount -

Quantity4.2

Rate-

Amount -

Providing and fixing aluminium work for wood finish fixed glass louver windows extruded profiles of Outer Frame 60 mm x 50 mm, 51 mm x 73 mm Mullion (1.2 mm thickness) . Using, 5 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent).Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24.including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge LW( 200 x 140 cm )

Quantity19.6

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity91.85

Rate-

Amount -

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity120.77

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity11.81

Rate-

Amount -

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy function, Door hinges 4x3x3mm, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicone (Make : BOSS or Equivalent) with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge D1 (Size:75 x 240cm)

Quantity8

Rate-

Amount -

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy function, Door hinges 4x3x3mm, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4.The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicone (Make : BOSS or Equivalent) with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge D2 (Size: 100 x 240cm)

Quantity8

Rate-

Amount -

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy function, Door hinges 4x3x3mm, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4.The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicone (Make : BOSS or Equivalent) with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge D3 Single Door (Size: 120 x 240 cm)

Quantity4

Rate-

Amount -

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy function,SS 304 grade Pull Handle 300x22 mm, Door hinges 4x3x3mm, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4, door width 850-950 mm. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicone (Make : BOSS or Equivalent) with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge D4 Double Door (Size : 120 x 240 cm)

Quantity2

Rate-

Amount -

Quantity5

Rate-

Amount -

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy function,Door hinges 4x3x3mm, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicone (Make : BOSS or Equivalent) with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge D7 (Size: 105 x 240 cm)

Quantity1

Rate-

Amount -

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy function,SS 304 grade Pull Handle 300x22 mm, Door hinges 4x3x3mm, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicone (Make : BOSS or Equivalent) with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge D5 Double Door (Size : 150 x 240 cm)

Quantity2

Rate-

Amount -

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy function,SS 304 grade Pull Handle 300x22 mm, Door hinges 4x3x3mm, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicone (Make : BOSS or Equivalent) with 35 mm thick shutter fabricated with front and back panels consisting of imported korean made ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board (GERMANY) and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge D (Size - 80 x 240 cm )

Quantity10

Rate-

Amount -

Supply and installation of fully glazed fire-rated unlatched double leaf door system with 120 minutes of integrity and radiation control (EW 120) with symmetrical (bi-directional) fire protection. The frames shall be made of cold rolled profiles. The door frames are cold rolled from 1.5 mm steel sheet to form a profile of 50 mm x 50 mm on all sides. The door shutter would have the top rail, side rail and bottom rail dimensions of 50 mm x 50 mm. The overall door opening shall be as per tested evidence and tested as per EN 1634-1 in an accredited international laboratory.The glass shall be 14mm clear, non-wired, toughened, interlayered, 120 minutes fire-rated glass for integrity and radiation control (EW 120) and insulation (I 20) with a light transmission of 86% and a sound reduction of 38 db and manufactured in UL & TUV audited facility and including UL-EU Certification (File number R38101) and compliant to class 1(B)1category of Impact Resistance as per EN 12600. The glass shall be tested for 5000 hours of UV resistance as per EN ISO 12543-4. The glass shall be EPD (Environmental Production Declaration) verified in accordance to EN 15804 and ISO 14025 in which its life cycle assessment is performed considering Cradle to Gate system boundaries. The glass must produce a recycled content declaration committing to a pre-consumer cullet of up to 11% and post-consumer cullet less than 1%. The glass shall provide bi-directional (symmetrical) fire protection.The shutters should be fixed to the frame using Forster Weld-on hinges of dimensions 179mm X 20mm. The profiles shall have groves to incorporate Fire Resistant CR gaskets. The glass should be held in its place with the help of 1.5 mm cold rolled steel beading and Kerafix 2000 ceramic tape with cross section of 4 x 15 mm as per the test evidence. Beading shall be clipped on using Stainless Steel self-tapping screws fixed at a distance of 70 mm from the edges and 150 mm c/c henceforth. The glass panes are to be supported on non-combustible 6 mm Calcium Silicate setting blocks. The door should be fitted with mortise dead lock , offset pull handle 450 mm long and door closer . The inactive leaf should be fixed to the frame using tower bolt at meeting edge at top as per the tested evidence. The doors shall be manufactured in a TUV audited facility. Fire rating & production audited certificate to be produced.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge GD (Size : 150 x 260 cm )

Quantity10

Rate-

Amount -

Providing and fixing insulated fire rated GI Sheet doors conforming to FD 120-I 30 classification of IS 3614 :2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accressesories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating.The Door frame shall be single rebate grooved profile of size minimum 100mm x 57mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet.Door leaf should be minimum 46mm thick fully flush double skin door. Door leaf must be manufactured from 1.2mm(18gauge) thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 48 kg/cum. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. The NABL accredited lab certificate shall be produced.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge D5 ( Size : 200 x 240 cm)

Quantity2

Rate-

Amount -

Quantity9

Rate-

Amount -

Providing and fixing of Fully Insulated Non Metalic Fire cum Acoustic Wooden fire doors as per IS 3614:2021, for 120 min integrity & insulation. The door is manufactured made out of thoroughly seasoned hard wood. The moisture content of wood material used at the time of construction of wooden composite fire door sets comprises of both frame and shutter shall not be more than 15% approx. in accordance with IS 287. The offered door must carry acoustic properties certification test evidence. To achieve Acoustic prooperties, the shutter thickness should be minimum 77mm. Door and frame should be factory finished with fire retardent primer FR880. All accressesories like hardware, vision panel, fire seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021. Every door must carry a label confirming to type of door & its fire rating.Door frame shall be Single rebate profile of section 140 x 90 mm made out of Ivory Coast ( 2nd Class )having density of 550-600 kg/m3 with factory made groove of suitable size so as to accomodate Fire seal of size 20x4mm An EPDM seal also to be provided in the frame to check spread of smoke.The frame must be primed with Fire retardant primer FR880 .Wooden shutter must be of minimum 77mm of thickness finished with 6mm thick commercial ply on both faces. The Shutter should be provided with 6mm thick commercial ply along with 1mm thick laminate on both faces . The composite thickness of the core insulation will be 63mm consists of minimum 10mm thick Calcium Silicate boards of Hilux / Pamtech make and treated wool Insulation material . The calcium silicate board must have Density not more than 900kg/m3 , having thermal conductivity 0.15W/mK . The shutter should be provided with heat activated intumescent fire seal strip of size 20mm x 4 mm mounted in the suitable grooves all three sides except bottom provided on Exposed OR concealed wooden lipping . The NABL accredited lab certificate shall be produced.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge D6 (Size : 200 x 260 cm)

Quantity10

Rate-

Amount -

Providing and fixing of Fully Insulated Non Metalic Fire cum Acoustic Wooden fire doors as per IS 3614:2021, for 120 min integrity & insulation. The door is manufactured made out of thoroughly seasoned hard wood. The moisture content of wood material used at the time of construction of wooden composite fire door sets comprises of both frame and shutter shall not be more than 15% approx. in accordance with IS 287. The fire door must carry earlier test evidence as per IS/ISO 3008-1. The fire door must carry a successful test evidence fire door design from CBRI , Roorkee / IPIRTI / NABL accrediated lab which operates in accordance with ISO/IEC 17025 for its fire rating. The offered door must carry acoustic properties certification test evidence as per IS 9901- Part(III)-1981 , DIN :52210 Part VI-1989 , ISO ( Part-II) - 2016 - 2016/ASTM-E-90. To achieve Acoustic prooperties, the shutter thickness should be minimum 77mm. Door and frame should be factory finished with fire retardent primer FR880. All accressesories like hardware, vision panel, fire seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021. Every door must carry a label confirming to type of door & its fire rating.Door frame shall be Single rebate profile of section 140 x 90 mm made out of Ivory Coast ( 2nd Class )having density of 550-600 kg/m3 with factory made groove of suitable size so as to accomodate Fire & smoke seal of size 20x4mm of approved make. The frame must be primed with Fire retardant primer FR880.Wooden shutter must be of 77mm thickness finished with commercial ply on both faces. The Shutter should be provided with 6mm thick commercial ply along with 1mm thick laminate on both faces . The composite thickness of the core insulation will be 63mm thick consists of PAMTECH / HILUX make calcium Silicate boards and treated wool Insulation material of 48kg/m3 including acoustic insulation . The shutter should be provided with heat activated intumescent fire seal strip of size 20mm x 4 mm mounted in the suitable grooves all three sides except bottom provided on Exposed wooden lipping . To achieve apporx. 32db properties necessary Acoustic seal set needs to be provided both in frame and shutter such as Perimeter seal in rebate of the main frame , Automatic drop down seal in bottom of the shutter and for double leaf application Artragal seal needs to be provided . These seals along with all hardware will be payable in extra items.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. D6 (Size : 100 x 240 cm)

Quantity10

Rate-

Amount -

Providing and fixing 12mm thick prelaminated three layer medium density particle board with decorative lamination on both side Grade I type II conforming to IS 12823 etc inpanelling fixed in aluminium doors windows shutters and partitionframe with CP brass / stainless screws etc. complete as per specifications. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity7.94

Rate-

Amount -

Providing and fixing stainless steel adjustable friction window stays with necessary stainless screws etc screws etc complete as per specifications and direction of Engineer-in-charge. 255x 95 mm.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity4

Rate-

Amount -

Providing and fixing aluminium handles anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessaryscrews etc. complete 125mm as per specifications.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity4

Rate-

Amount -

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity4

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity4

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity4

Rate-

Amount -

Quantity10

Rate-

Amount -

Providing & fixing compact laminate toilet front partition of following standard dimension which includes 600mm door size width made of 12mm thick compact laminates made out of urea free, thermosetting phenolic resins treated Kraft papers as core material and amino plastic resin treated decor papers on the finish surface. This includes providing and fixing in position necessary hardware made out of stainless steel (Grade 316) as per manufactures specification & Architects instructions like (1) Door knob, (2) Spring loaded hinges (3) Slide Bolt with occupancy indicators (4) Coat hooks. Toilet front partition with dimension of 2050 mm height x 1200 mm width which includes 600 mm door size width.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity16

Rate-

Amount -

Providing & fixing compact laminate toilet front partition of following standard dimension which includes 600mm door size width made of 12mm thick compact laminates made out of urea free, thermosetting phenolic resins treated Kraft papers as core material and amino plastic resin treated decor papers on the finish surface. This includes providing and fixing in position necessary hardware made out of stainless steel (Grade 316) as per manufactures specification & Architects instructions like (1) Door knob, (2) Spring loaded hinges (3) Slide Bolt with occupancy indicators (4) Coat hooks. Toilet front partition with dimension of 2050 mm height x 1000 mm width which includes 600 mm door size width.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity6

Rate-

Amount -

Proving and fixing urnial partition made of 12mm thick compact laminate size 450mm(D) x 1190mm(H) Fixed on wall with the help of SS grade 316 brackets including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Quantity16

Rate-

Amount -

Providing and fixing Toilet Cubicle with dimension of 2000mm Height x 1800 mm width which includes 750 mm door size width, 8/10mm thickness tempered glass by heating 690° C with international standards. An Anti Lime scale coating applied on glass, Hydrophobic chemical coated in glass for prevention of all kind of stains on the glass 2 years warranty for this application. This includes providing and fixing in position necessary hardware made out of brass , stainless steel (Grade 316) and treated aluminium channels as per manufactures specifications. Solid hinges come in brass with chrome coated stabilizer rod and towel rod coming in stainless steel, sliding rail in treated aluminium profile. Floor clamps stainless steel. All hardwares are covered 5 years Replacement warranty.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity10

Rate-

Amount -

Supply and installation of Single glazed mullion free demountable glass partition using 11.52mm (5mm+1.52+5mm) Laminated Glass in proprietary natural anodised/Black aluminium sections ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party test certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets. The Glass to be fixed with the help of Proprietary Stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional Profile Bottom Seal pair for additional accoustic if required. Glass thickness - 11.52mm (5mm+1.52+5mm) Laminated Glass. All Profiles are min 1.5mm thickness excluding 20 microns of Anodizing.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Standards applicable: • Structural stability test in accordance to BS 5234: Part2:1992 & EN 1991-1-1:2002 • Acoustic test for sound insulation in accordance to DIN EN ISO 10140-2 ASTME-E 90 • ALT profile sections are manufactured and tested in accordance to EN573-3, EN755-2, DIN EN 12020 T2 , non- dimensions manufacturing tolerance deviation DIN ISO 2768-1 class C = coarse • Toughened glass complies accordance to BS 6262 (glass supplier specification from market) • Environmental product declaration (EPD) rating accordance to ISO 14025 & EN 15804 • HPDs - Ref HPD Unique Identifier; 22451 & 22452 - Classification : 09 84 00 Acoustic Room Components

Quantity26.24

Rate-

Amount -

Curtain glazing-Design, Supply installation, fixing and testing curtain glazing system at all heights consisting of powder coated aluminium frame and glass of approved make, aluminium frame work fabricated out of heavy duty Aluminium extruded profile, powder coated with durable thermosetting polyester powder coating by electrostatic spraying and hard stoved to not less than 60-micron thickness to comply with BS 6496:1994 (1991) and AAMA 2603-98 standard as per approved metallic shade. All aluminium members and profile shall be of AC-25grade as specified. Mullions & Transoms, extruded aluminium sections shall be of 6063-T6 alloy to be decided as per structural calculations. The aluminium members shall be protected with protections tapes all around the profile for safety against external scratches at site. (Protection tape shall be removed only at the time of handing over as per the instructions of Engineer In Charge).The anchoring /bracing of the Al. sections to the RCC slabs /beams /columns/block masonry shall be done with required number of non-corrosive galvanized extended brackets of approved design (Galvanizing to be done conforming to IS: 4759-1996 up to 610 gms per SqM, 80-90 microns thickness) with approved dash fasteners of minimum 12mm dia and depth of minimum 100mm, in the concrete/ stainless steel bolts including providing and fixing aluminium shims of various thickness to adjust the beam level and line variation. The anchoring system should be designed to withstand the dead load of structural wall as well as stresses due to wind pressure as per IS code 875-Part III. (MS frame work to be provided wherever required will be measured separately for payment).(The detailed structural design calculations & shop drawings both vetted by IIT shall be provided by the executing agency and mock-up based on approved design has to be approved by Engineer In Charge before start of work.)The glazing subframe shall be aligned for each vertical mullion of size 50 mm x 180 mm for the entire height and for each transom of size 50 mm x 75 mm for the entire width horizontally by laser beam equipment to ensure 100% x axis and y axis alignment. To make the joint water and air tight, the glazing sub frame work is provided with approved in built ventilation and drainage system. All the joints of the structural glazing system and the periphery of glass shall be properly sealed with specified weather silicon. The details of inbuilt ventilation and drainage system should be submitted by the contractor before execution. Heavy duty, best quality EPDM gasket of approved colour of suitable profile is provided at joints and connections between.The glass is to be fixed at the outer side of the aluminium subframe with structural silicon sealant of approved make & colour (the structural silicone bite size shall not be less than 6 mm as per the structural design calculation or requirement/as per manufacturers recommendation).All screws, washers, Bolts, Nuts and Anchors used shall be only stainless steel of 316 grade etc. complete as per direction of Engineer in Charge. Curtain wall should be sealed to hoist structure and allow movements, ensure water tight and water proof etc. in its service life. Item includes cost of design, supply, installation, fixing aluminium frame with structural members, mullions, transom, sub frame, fixtures etc, including glass as specified below, cost of sealants, brackets, fasteners, screws, sleeve, spacer tape, backer rod, bolts, gasket, scaffolding, transportation, all taxes etc. complete in all respect and as directed by engineer in charge for the following items. Etc. (The above work shall be carried out by an agency having sufficient experience and should ensure a warranty for a period of 10 years. Only skilled and experience persons shall be employed for this purpose). Glass - 6 mm thk performance Glass. High performance glass U value less than or equal to 5.6+-0.1 Watt/m2k, SF-0.47+-0.02,SC -0.54+-0.2,VLT43%, External reflection11%, Internal reflection18% etc.Provide Horizontal and vertical Aluminium Capping 50 mm x 100 mm in line with tender drawings, all visible surfaces shall have high Durability (Akzonobel) / Super durable (Jotun) Powder coating of 60 - 80 micron confirming. The non visible aluminium surfaces shall have minimum chromatizing treatment.

Quantity566.96

Rate-

Amount -

SH: FLOORING WORK Providing and laying Polished Granite stone flooring of approved colour, design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Purchase price : Rs.2627 / Sq.mtr (Excluding GST ).Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity263.28

Rate-

Amount -

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Purchase price : Rs.1460 / Sq.mtr (Excluding GST ).Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity97.75

Rate-

Amount -

Extra for fixing marble /granite stone, over and above corresponding basic item,in facia and drops of width upto 150 mm with epoxy resin based adhesive,including cleaning,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.(Excluding GST ).Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity55.14

Rate-

Amount -

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting/filling the joints with white cement and matching pigments including cost and conveyance of all materials, labour charges etc. complete at all levels as per drawing and selection as directed by Engineer-in-charge Size of Tile 600x600 mm, Purchase price :Rs. 600 / Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity207.21

Rate-

Amount -

Providing and laying fully Vitrified matt tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in dadoing, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting/filling the joint with white cement & matching pigments,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile600x600 mm, Purchase price :Rs. 600 / Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity787.55

Rate-

Amount -

Providing and laying fully vitrified polisherd floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting the joints with white cement and matching pigments,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile 1600x800 mm, Purchase price :Rs. 1045 / Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity119.28

Rate-

Amount -

Providing and fixing tile skirting in risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. Size of Tile 1600x800 mm, Purchase price :Rs. 1045 / Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity12.39

Rate-

Amount -

Providing and laying fully vitrified polisherd floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting the joints with white cement and matching pigments,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile 1600x800 mm, Purchase price :Rs. 840 / Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity185.16

Rate-

Amount -

Providing and fixing tile skirting in risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 1200x600 mm, Purchase price :Rs. 840 / Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity9.09

Rate-

Amount -

Providing and laying vitrified matt floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting the joints with white cement and matching pigments,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile 1200x600 mm, Purchase price :Rs. 1163 / Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity185.22

Rate-

Amount -

Providing and fixing tile skirting in risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 1200x600 mm, Purchase price :Rs. 1163 / Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity12.99

Rate-

Amount -

Providing and laying vitrified border floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 58 x 250 mm, Purchase price :Rs. 3172.4 / Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity5.67

Rate-

Amount -

Providing and laying vitrified matt floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 1200x600 mm, Purchase price :Rs. 1087.16 per Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity52.92

Rate-

Amount -

Providing and fixing tile skirting in risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. Size of Tile 1200x600 mm, Purchase price :Rs. 1087 per Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity4.83

Rate-

Amount -

Providing and laying vitrified matt floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting the joints with white cement and matching pigments,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile 198 x198 mm, Purchase price :Rs. 2193.65 per Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity163.35

Rate-

Amount -

Providing & laying of machine tuffed Nylon Carpet tile (Minimum 610 GSM ) with PVC Free E-Bac backing . The carpet shall have minimum production yarn weight equivalent in range of 100% Solution Dyed Universal Nylon 6 as mentioned below. The carpet shall have sufficient gauge 1/10 Inch with sufficient stitches11 Per Inch. The carpet should carry a warranty not less than 10 years from the manufacturer and supplier of carpets. The carpet shall have the pile height ranging from 2.5mm-5.5mm (±0.5 mm) and total thickness of the carpet tile shall also range from 7.5 mm (± 0.5 mm). The carpet shall have anti-static properties as per the manufacturers specifications and as approved by the Engineer-in-charge. The Carpet shall also be Stain and Soil resistant as per the manufacturers specifications. Shampooing of carpet to be done before site is handed over. This also includes covering of carpet with plastic cover and taping of joints with masking tape,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.(The above work shall be carriedout by an agency having sufficient experience and should ensure a warranty for a period of 8 years. Only skilled and experienced persons shall be employed for this purpose.) Purchase Rate : Rs. 1140 per Sq.m

Quantity801.78

Rate-

Amount -

Providing and laying Calibrated Matt finish Kota stone slab of size 600x600x20mm over 25 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand). The rate is inclusive of all operation material and required pattern ,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.The purchase price (excluding GST) of tile shall be as mentioned below in basic price and any deviation plus or minus in the purchase price will be adjusted (paid extra/deducted) at the time of billing. The work shall be carried out by an agency having good experience with the skilled labours on the specified work mentioned above. Purchase price :Rs. 408.12 per Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity210.46

Rate-

Amount -

Providing and laying Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Purchase price :Rs. 408.12 per Sqm. Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity10.71

Rate-

Amount -

Providing and laying vitrified full body 'floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting the joints with white cement and matching pigments,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile 1200x600 mm, Purchase price :Rs. 893.41 per Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity104.48

Rate-

Amount -

Providing and laying fully Vitrified matt tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in dadoing, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting/filling the joint with white cement & matching pigments,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile 1200x600 mm, Purchase price :Rs. 893.41 per Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity120.96

Rate-

Amount -

Providing and laying Vitrified matt tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in dadoing, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting/filling the joint with white cement & matching pigments,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge . Size of Tile 1200x600 mm .Purchase price : Rs.582 per Sqm(Excluding GST ).Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity314.53

Rate-

Amount -

Providing and fixing tile skirting in risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. Size of Tile1200x600 mm . Purchase price : Rs.582 per Sqm (Excluding GST ).Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity20.11

Rate-

Amount -

Providing and laying full body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting/filling the joints with white cement and matching pigments including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile1200x600 mm . Purchase price : Rs.926 per Sqm (Excluding GST ).Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity352.64

Rate-

Amount -

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 Sq.m,including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Purchase price :Rs. 2440 per Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity53.71

Rate-

Amount -

Providing and fixing Marine grade plywood flooring with 10mm EPE foam sandwitched between 18mm thick plywood boards supported on necessary MS frame work( MS Frame work will be paid seperately). The rate is inclusive of cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity69.4

Rate-

Amount -

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting the joints with white cement and matching pigments,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile 398 x 800 mm, Purchase price :Rs. 1356 per Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity128.67

Rate-

Amount -

Providing nosing for pre finished granite treads of steps. The rate is inclusive of cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity95.29

Rate-

Amount -

Providing and laying tacttiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting the joints with white cement and matching pigments, cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile 300 x 300 mm, Purchase price :Rs.1356 per Sqm Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity12.82

Rate-

Amount -

Providing edge moulding to 18 mm thick granite work, including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work (Excluding GST ).Any deviation plus or minus in the purchase (excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Quantity181.89

Rate-

Amount -

Providing and laying 5mm thick tile protection sheet ( a closed cell, polymer based micro cellular foam, reinfirced with high performance polymerson finished) vitrified tile/ engineered stone/ Laminated wooden / vinyl and other flooring for protection and removal of the same after completion of all other works, including cost and conveyance of all materials, labour charges, lead, lift, curing , till handover etc, complete as directed by Engineer in charge at all levels

Quantity2671

Rate-

Amount -

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry,cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. but excluding the cost of nosing of steps etc. complete.

Quantity253.53

Rate-

Amount -

Providing and laying 20mm or nearest (+/-1mm) thick kiln seasoned & treated original North American Maple wood( second grade Northern hard maple, grade marked and stamped as produced by MFMA member manufacturer) flooring with planks of width 57 to 83mm in required design and patterns, laid over chemically treated (anti-termite) pine wood sleepers of minimum size 30mm thick x 60mm width installed 30 to 35cm centre to centre, which rest on 10mm thick professional EPDM rubber pad/ air cushion pads on damp free & levelled concrete floor over 6 mil(150 micron) thick polyethylene sheet. The flooring to be machine sanded in uniform level and finished with primer and polish Bona or equivalent and two coat game line markings including providing necessary fittings such as staples, cleats of required size, nails, adhesives etc complete as per the direction of Engineer-in-Charge. The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 5 years from the date of completion of said work.

Quantity484.35

Rate-

Amount -

Supply and Installation of European Origin, FIBA Certified, Point Elastic polyurethane Flooring having thickness of 9.0mm comprising of 7mm Prefabricated SBR Mat followed by 2mm PU Coatings. Seamless, non-porous, and smooth surface for Very good resiliency for comfort, injury prevention, Sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. System consists of SBR Matt being laid using two component PU Adhesive followed by Sealer to fill in all the pores of SBR mat, 2 coats of PU Resin Layer followed by Top PU Coat and game line marking. Product should meet European standards EN- 14904 - P1 category, Shock Absorption: 26% as per EN 14808, Vertical Deformation: 0.9mm as per EN 14809, Friction value according to EN 13036-4 should be on or above 98, Ball Bounce: 99% according to EN 12235, Gloss: 5% as per EN 2813, Resistance to Rolling Load: ≥ 1500 N as per EN 1569, Resistance to impact: ≥ 800 gr @ 10°C & ≥ 1200 gr @ 23°C as per EN 1517, Resistance to indentation: 0,37 mm @ 5 min & 0,17 mm @ 24 hrs as per EN 1516, Resistance to wear: 150 mg as per EN ISO 5470, Flammability: Bfl-S1 as per EN 13501- 1, Improvement impact sound insulation (ΔLw): 20dB according to ISO 717-2, V.O.C. content – adhesive/resins Solvent free, Resin composition Free of solvents and heavy metals, Elongation at break: structure 150 % as per DIN 53455, Tensile strength: structure 8 N/mm² according to DIN 53455, Tear strength: structure 25 N/mm according to DIN 53515. Consumption of materials has been as per standards which is 0.90Kg/sqm Adhesive for SBR Matt, 0.5Kg/sqm Sealer, 2.8Kg/sqm PU Wear Coating followed by 0.14Kgsqm Top PU Colour Coat mixed with Spheriglass. Product should be manufactured under ISO 9001 for quality management, ISO 14001 for environmental care and ISO 26000 for corporate sustainability. All the works to be carried out as per approved drawing & instruction by engineer in charge.Rate includes cost and conveyance of all materials, labour charges, lead, lift, scaffolding, sundries etc complete at all levels. The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 5 years from the date of completion of said work.

Quantity53.73

Rate-

Amount -

SH : CEILING WORKS & PARTITIONS Providing and fixing Gypsum false ceiling (12.5 mm) at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/Sq.m (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings,trap doors,grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge.but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks) The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity639.91

Rate-

Amount -

Providing and fixing 12.5 mm thick tapered edge gypsum moisture resistant board at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/Sq.m (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge.but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks).The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity236

Rate-

Amount -

Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System with Tegular 15 BE Edge Tiles of 17mm thick and Suprafine 15mm face exposed grid. The tiles shall have pin hole visual with Humidity Resistance (RH) of 99%, NRC 0.0.7 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 30db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84 with 17mm Tegular 15 BE edge and 8mm drop in module size of 600 x 600mm (nominal). It shall be suitable for Green Building application, with Recycled content of up to 69%. The tile shall have certifications.The tile shall be laid on KCS Suprafine 32 with 15 mm wide T - section flanges colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border cross tee/main beam shall be levelled using perimeter fill. The Tile & Grid system used together shall carry a 30 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The Tile & Grid shall have the manufacturers name embossed/printed on it. The supply shall be backed by a Manufacturing Test Certificate.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 5 years from the date of completion of said work.

Quantity477.73

Rate-

Amount -

Providing and Fixing Suspended Metal Perforated Ceilings in Hook-on system (R-H 200) with Rectangular panels made out of 0.6 mm thick GI in width ranging from 500mm, length ranging from 1800 mm to 2400mm.RH200 Ceiling The R-H 200 rectangular Hook-On panels to be made of Galvanized Iron (GI), minimum thickness 0.6mm, 120gsm hot dipped galvanization (both sides), and recycled content of 25%. The panel surface to be powder coated (post coat) to 60-80µ on visible side after mechanical production, low gloss (degree of gloss approx. 20%). Scrubbable, architectural-quality, electrostatically applied polyester powder coat paint applied to entire panel after forming (post coat). The color to be approved Wood Grain finish (Pure Polyesterr) . The panels to be random perforation having 2.5mm dia. round holes square 90° perforations, 16% open area with border / without border.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 5 years from the date of completion of said work.

Quantity70.98

Rate-

Amount -

Providing & fixing horizontal level suspended ceiling comprising of Vertical Linear wooden finish Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600mm in powder coated to Woodgrain (Red Oak/Cherry). The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The baffle blade shall be suspended using Slotted U-profile of 20 x 30 x 3700mm (Thk-1.5mm) having slots in module of 25mm to keep baffles at an on-center spacing of 150mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps.SUSPENSION: Shall be hanged using baffle hanger from U-profile made of mild steel with powder coating thickness of 60-80 micron. The U – profile to comprise of alternate square & rectangular slots of 6.5x6.5mm & 28x6.5mm respectively on the web for locking the baffle hanger using plugin clip to secure the hanger in perfect position and achieve uniform spacing between baffles. The overall dimension of the U – profile is 20(W) x 30(H) x 3750(L) mm and is rolled form from 1.5mm thick mild steel with a powder coating thickness of 60-80micron. U- Profile to be connected to each other using U –Profile Splice. TheU- profile shall be hanged from the true ceiling using threaded rod using a U- Profile hanger.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 5 years from the date of completion of said work.

Quantity58.89

Rate-

Amount -

Providing and fixing 4mm wood finish aluminium composite ceiling of approved make and colour including necessary aluminium framework.The aluminium composite panel should consist of total thickness with top and bottom coil of 0.5mm thick AA3003 Alloy grade with temper H44 and the top aluminum coil should be coated with fluoro-polymeric resin PVDF / FEVE from Kynar 500/Lumiflon as per approved colour and shade, with Humidity test for 4000 hrs As per ASTM D-2247.The core should be mineral core with minimum 70% inorganic matter passing reaction to fire EN13501-1 Class B S1 D0; also confirming as per BS 476 part 6 &7 and 3Hrs Fire rating as per ASTM E 119. Manufacturer must have valid process certification by any recognized third-party agency for testing and the supply must strictly be made from the unit mentioned in the FPC Certificate. Sound transmission loss (Acoustic Properties should be 27-30DB as per ISO: 354 ISO-10140(part- 2). Coating shall be protected by 80micron Surface protection film to prevent scratches during fabrication and installation. The rear aluminum skin shall be a wash coated or a basic Polyester coated surface with complete product identification printed on it along with date & time of manufacturing and batch details. Rate shall include cost and conveyance of all materials, Aluminum frame work, handling of machineries, electrical charges, labour, lead, lift, scaffolding etc complete at all levels. Work shall be executed by standard specification and as per the direction of the Engineer-in-Charge.The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 10 years from the date of completion of said work.

Quantity150.55

Rate-

Amount -

Providing and fixing 10.5 cm thick Gypsum Board Partition as per design. 48mm Gyproc Gypserra C stud (0.5mm thick having one flange of 34mm and another flange of 36mm made of GI Steel) placed at 610mm centre to centre in 50mm Gypserra floor and ceiling channel (0.5mm thick have equal flanges of 32mm made of GI steel), which is anchored to the floor & true ceiling using suitable anchor fasteners. The boards are to be fixed to the framework with joints staggered to avoid leakage through joints. A Gypserra fixing channel of 50mm width (0.9mm thick having two flanges of 9.5mm each) has to be provided at the horizontal joints of the outer layer of boards screw fixed to the studs using metal to metal flat head screws. Also to have an additional 19mm thick ply supports (wherever required) as spacer at the false ceiling level and as sub frames for doors and glazed openings as per details or as per Engineer in charge instruction. Infill from Finished flooring level till false ceiling level. As an acoustic requirement, contractor to affix 25mm glass wool of density 20kg/m³ as indicated in the drawing. The framework to be cladded with inner layer 12.5mm plain board (IS-2095 Part 1:2011) and outer layer with15mm Gyproc® Fireline board fixed on either sides with Gyproc Drywall screws of 35mm at 300mm C/c and 150mm C/c at periphery of wall.The board or to be fixed vertically to the frame work with joins staggered to avoide leakage through joins. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc jointing compound, Gyproc joint paper tape as per recommended practices of Saint Gobain Gyproc India. Gypsteel Ultra nogging channel is to be fixed using metal to metal flat head screws at the horizontal joints of the board. The Junction of the partition with masonry and all penetration through the partition has to be treated with Hilti / 3M fire and acoustic sealant. The junction between partition & ceiling to be provided with 12mm x 12mm shadow channel as per details. The junction between partition & ceiling to be provided with shadow channel as per details. To have 12mm ply backing to fix skirting as per details. Contractor to make provision for all electrical/networking boxes and to provide dia cut-outs as required. Electrical/Network boxes /other services to be provided at desired height and location as indicated in the drawing. All junctions between materials, columns, walls, etc to have necessary groove with Aluminium `L' angle as per details. All exposed edges / corners/ grooves to have proprietary corner / edge bead sections/channels as per Architect's instructions. All exposed gyp board edges to be fixed with self-adhesive. At all locations where services are penetrating the partition above false ceiling to have MS frame work around the duct / cable tray / pipe and the gaps between the frame work and service to be filled with appropriate acoustic sealant / fire stop material as directed (As per acoustic consultants). The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.Work shall be executed by standard specification and as per the direction of the Engineer-in-Charge. (The above work shall be carried out by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity92.07

Rate-

Amount -

Providing and fixing of 98.0mm thick Gypwall Habito Standard partition consist of GypSerraTM Metal framework having maximum reachable height of 3600mm satisfying L/240 criterion at 200Pa, possessing fire rating of 60mins & Medium duty ratings. Partition comprises of single layer, tapered edge Habito Standard Gypsum Board,certified GreenPro by CII & strategic location of manufacturing plants results in lower carbon emissions. Partition includes single layer of 13mm thick Gyproc®Habito Standard Board having on both side of framing. GypSerraTM Metal frame work, manufactured using CR1 Grade Steel with surface finish of AZ150 & tested for 500hrs of salt spray test includes 70x34x36x0.5mm GypSerraTM C-Stud with lip of 6.5mm and H-cutout on web enabling positioned at 610mm c/c in72x32x32x0.5mm GypSerraTM Floor Channel & 72x32x32x0.5mm GypSerraTM Ceiling Channel with flanges bend at 5° acute angle. Floor & Ceiling Channel is anchored with Gyproc® Rawl plug Ø8x45mm in zig zag manner. 70x40x40x0.5mm GypSerraTM Noggin Channel to be fitted at the horizontal joints of board. Gyproc®Habito standard board strip is placed between ceiling channel and soffit when fire rating is more than 30mins.Gyproc® Boards to be Screw fixed with Gyproc®Habito Screw of 25mm with 30nos per m2 at 300mm at center and 150mm at periphery. 50mm Glasswool of density 20kg/m3 shall be placed in Metal framework with the help of holding Clip. Edges & joints to be finished with Gyproc® Pro-Fill JC conforming to ASTM C475 & Gyproc®Fiber tape. Periphery & cut-outs of the partition to be treated with suitable Fire & Acoustic Sealant. All the performance test are carried out at NABL accredited/ government approved lab.Work shall be executed by standard specification and as per the direction of the Engineer-in-Charge. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity35.18

Rate-

Amount -

Providing & Fixing horizontal level suspended ceiling comprising of GI Microlook Lay-in Plain metal ceiling consisting of 600x600mm (Nominal Size) Lay-in tiles of 120 gsm galvanized steel as per IS 277 (2003) suitable for architectural finishes in 0.5 mm thickness as per IS:513 (1994) in approved color with Square Tegular/Microlook 90˚ edge having 8mm drop and 5.5mm flange. The difference between the 2 diagonal dimensions of the tile to be less than 1mm. Tiles shall be flattened by precision leveller to minimize sag to less than 1/400mm. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000 hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E1 using Excite/BYK Gardner instrument and gloss level 25±5% at 60˚ as per ASTM D523. The tile shall have a Light Reflectance of ≥ 63% in accordance to ASTM 1477-98 and Fire Performance of Class 0/1 as per BS 476 Part 6 & 7 in module size of 600x600mm..The tile shall be laid on 15 mm wide T - section flanges colour global white (matching to tile colour) having double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm (all sections). The deflection loading of the system shall be 7.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 8.5kg/m. The end details of the cross tee shall be made of pre hardened steel clip fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel 90 gsm and pre-painted steel with baked polyester paint of 0T bending capability. SUSPENSION SYSTEM accessories manufactured and supplied by Manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. Additionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 5 years from the date of completion of said work.

Quantity99

Rate-

Amount -

Providing and fixing 1 layer magnesite bonded wood wool acoustic panel of approved make/ Equivalent, 1mm thick fibre, exquisite surface structure, building biology recommended, size 600 x 1200 x 25mm, having edge detail SK-04, weight 11.30Kg/Sq.m, fire protection class B-s1,d0 as per EN 13501-1 & Humidity Resistance of 95%. Thickness Tolerance T2 (± 1 mm) according to EN 13168. Wood wool panels to be PEFC certified & should bear the Forest Stewardship Council Seal confirming that the wood used originates from responsibly managed forests. Wall Installation : UD profile 28mm/27mm/0.60mm is fixed to the wall, such that the base of the UD profile is 25mm above the planned finished ceiling level / 25mm less that the finished wall level. The ends of the CD profile is to be inserted into the UD profile and placed at a distance of 600mm centre to centre and is to be secured to the soffit/wall using the Heradesign Universal Bracket. The Universal brackets are to be fixed to the soffit/wall at a distance of 900mm using 6mm dia anchor fasteners (for ceilings) and wall screws (for walls). Wood wool boards to be screw fixed to the CD profile using 6 screws (per board) 50/4.50mm dia Heradesign screws. The wood wool board should be backed by 40mm thick glass wool slabs packed in 1200 x 600mm polythene bags having a gross density of 50kg/m3. The finished face of wood wool panels have to be installed at a distance of 300mm from the soffit to achieve a NRC of 0.90 as per ASTM C423. Panels can be spray painted on site (before installation) under supervision of manufacturer. Ceiling Installation : The wood wool panels to be laid in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanized @ 90 gsm/Sq.m) consisting of Main "Tee", size 24W x 38H x 3600L mm made from 0.30 mm thick sheet spaced at 600mm centre to centre and Cross "Tee", size 24W x 38H x 600L mm made of 0.30 mm thick sheet to be interlocked between the main T runners at the distance of 1200mm centre to centre to create 1200x600mm module to lay ceiling tiles of approved surface pattern in the grid including, wherever required, cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. The perimeter trims to be of 24W x 24H x 3600L mm and 0.30 mm thick. Main "Tees" to be suspended from ceiling using consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners. The first suspension from the perimeter trim should not exceed 300mm. The bottom exposed width of ¬¬24mm of all T-sections shall be pre-painted with polyester paint. The wood wool board should be backed by 40mm thick rock wool slabs packed in 600 x 600 polythene bags having a gross density of 50kg/m3. The finished face of wood wool panels have to be installed at a distance of 300mm from the soffit to achieve a NRC of 0.90 as per ASTM C423. Panels can be spray painted on site under supervision of manufacturer.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 1 years from the date of completion of said work.

Quantity190.88

Rate-

Amount -

Providing & Fixing Wooden finished Suspended Ceiling System with Woodworks Microlook edge tiles and Armstrong 15mm Suprafine 38 or 43 exposed grid. The 18mm thick Plain Tile shall be made of Medium Density Fibre of density 700+ Kgs/m3. The tile shall have melamine laminate finish of approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut) on visible side and backing laminate (same shade) on the reverse with 0.8mm matching PVC edge banding in module size of 600mm x 600mm. The edges of the tile shall be Square Tegular/Microlook 90˚ having 8mm drop using 3mm thick compact board spline. The tile shall have Humidity Resistance (RH) of 70%, with sag limited to 1/300mm. The tile shall have a Fire Performance of class 1 according to BS 476 part 7. The tile shall be laid on Armstrong Suprafine 38/Suprafine 43 with 15 mm wide T - section flanges having double stroke rotary stitching on all T - sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38 or 43mm (all sections) as per manufacturers reccomendation. The deflection loading of the system shall be 12.5-15.6 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360 within suspension points) with deflection loading of 15.5 - 18.6kg/m2. The end details of the main beam and cross tee shall be made of pre hardened steel clip fixed to the ends. The cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T - Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 1 years from the date of completion of said work.

Quantity109.57

Rate-

Amount -

Providing & Fixing Wooden Finished Suspended Ceiling System with Woodworks Microlook edge tiles and 15mm Suprafine 43 exposed grid. The 18mm thick Tile in RD6006 (RD6) perforation shall be made of Medium Density Fibre of density 700+ Kgs/m3 having perforation of hole diameter 6mm and open area 6% with linear & diagonal pitch of 32mm and 22.6mm respectively with a border of 33mm.The tile shall have melamine laminate finish of approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut) on visible side and backing laminate (same shade) on the reverse with 0.8mm matching PVC edge banding in module size of 600mm x 600mm. The edges of the tile shall be Square Tegular/Microlook 90˚ having 8mm drop using 3mm thick compact board spline. Back side of the tile shall have Soundtex fleece hot pressed to achieve NRC of 0.4 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70%, with sag limited to 1/300mm. The tile shall have a Fire Performance of class 1 according to BS 476 part 7.The tile shall have a Fire Performance of class 1 according to BS 476 part 7. The tile shall be laid on Armstrong Suprafine 38/Suprafine 43 with 15 mm wide T - section flanges having double stroke rotary stitching on all T - sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38 or 43mm (all sections) as per manufacturers reccomendation. The deflection loading of the system shall be 12.5-15.6 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360 within suspension points) with deflection loading of 15.5 - 18.6kg/m2.The end details of the main beam and cross tee shall be made of pre hardened steel clip fixed to the ends. The cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T - Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability.SUSPENSION SYSTEM accessories supplied by consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners).The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 1 years from the date of completion of said work.

Quantity221.4

Rate-

Amount -

Providing and Fixing Channelled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side including Installing Skirting for Channelled wall panel of width 50mm or more as required by the Engineer-in-Charge. Finish off the edges using wooden moulding of matching colour for the wall Panel. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 21mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.5. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.Ceiling Installation : The panel shall be downwardly installed with tongue and groove mechanism using Inside clip on Prelude 43 with 24 mm wide T - section flanges having rotary stitching on all T - sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm, 35mm and 30mm respectively. The deflection loading of the system shall be 17.8 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with deflection loading of 21.4kg/m. The end details of the main beam and cross tee shall be made of pre hardened steel and the cross tee is designed to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T - Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability.The grid shall be installed with suspension system of approved make. SUSPENSION SYSTEM accessories manufactured and supplied by approved manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre–Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. Additionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners. The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Wall Area Installation : The panel shall be mounted by tongue and groove mechanism using inside clip on Knauf aluminium extruded keel made of Grade 6063-T5 having dimensions 3000(L) x 24(H) x 15.5(W). The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 1 years from the date of completion of said work.

Quantity696.83

Rate-

Amount -

Providing and Fixing Channelled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side including Installing Skirting for Channelled wall panel of width 50mm or more as required by the Engineer-in-Charge. Finish off the edges using wooden moulding of matching colour for the wall Panel. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 21mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.Ceiling Installation : The panel shall be downwardly installed with tongue and groove mechanism using Inside clip on Prelude 43 with 24 mm wide T - section flanges having rotary stitching on all T - sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm, 35mm and 30mm respectively. The deflection loading of the system shall be 17.8 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with deflection loading of 21.4kg/m. The end details of the main beam and cross tee shall be made of pre hardened steel and the cross tee is designed to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T - Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability.The grid shall be installed with suspension system of approved make. SUSPENSION SYSTEM accessories manufactured and supplied by approved manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre–Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. Additionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners. The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Wall Area Installation : The panel shall be mounted by tongue and groove mechanism using inside clip on Knauf aluminium extruded keel made of Grade 6063-T5 having dimensions 3000(L) x 24(H) x 15.5(W). The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m.The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 1 years from the date of completion of said work.

Quantity696.83

Rate-

Amount -

Supply and fixing of exterior ceiling of panel sizes of 250mmx 2950mm or nearest, durable and resistant to moisture, water and borer-fungus-termite attack. Panels to be installed with Aluminium sections of suitable gauge as per the installation of planks & size according to site conditions . Panels with suitable trims for edge profiles, Connecting profiles, starter and ventilation profile, interior and exterior corners profile . Panels must be maintenance free , rust proof and are 100% Water proof. 10 years warranty for colour & finish of the panels.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 10 years from the date of completion of said work.

Quantity317.76

Rate-

Amount -

Providing & Fixing Of Perimeter Trim for channeled wood work perforated panels in walls with 19mm face for perimeter solution using appropriate accessories made of extruded aluminum of O/L dimension of 19.3 x 100 x 3000mm. The inverted F- Shape section provides 2 flanges and 19mm face for resting of tile, must be powder coated in Global White. Profile to have engineered design boss for fitment of Tee bar connector, Splice plate Corner connector & hanger clips. The rate shall include cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity245.7

Rate-

Amount -

Providing & Fixing of Perimeter Trim for channeled wood work perforated panels in ceiling with 152mm face for perimeter solution using appropriate Accessories made of extruded aluminum of O/L dimension of 152 x 64 x 3000mm. The L- Shape section provides a visible face of 152mm from the bottom, must be powder coated in Global White. Profile to have engineered design boss for fitment of Tee bar connector, Splice plate Corner connector & hanger clips.Alignment plate are to be used for aligning the face of the knife edge axiom. The rate shall include cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity327.6

Rate-

Amount -

Providing & Fixing of woodworks channel over the structure using self-tapping screws spaced every 50cm. Finally, fix woodworks panels onto the Keel using clamping accessories.The rate shall include cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity1460

Rate-

Amount -

Supply & fixing of Suspended Aluminum sections of 50x75mm and 0.5mm thick(wood finish powder coated) with U shaped profiles in varying grid dimesions as per drawing detail. The section is suspended from true ceiling with approved C channels with 30x30x30x1mm powder coated GI slotted channel carrier system with 6 mm threaded rod.The clips to be fastend onto existing gypsum with plywood backing of 16mm thkness inside the GI channels at regular intervals as per ceiling layout. Hangers and suspenders to be fixed using anchor fastners each at anchorage ends.and all required accessoriers at all levels & all heights of building all complete as per the 3D views,architectural drawings. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 10 years from the date of completion of said work.

Quantity236.75

Rate-

Amount -

SH : ROOFING Providing and laying pressed clay tiles including top ridges and end ridges (as per approved pattern 20 mm nominal thickness of approved size) on rough surface of roof laid over concrete battens . Concrete battens are made up of cement mortar 1:4 (1 cement : 4 coarse sand)of size 100x75mm thick are laid at intervals @380mm c/c.Battens require 3-5 days curing .Tiles are fixed on battens using the legs provided in the tiles, finished and completed as per the approved architectural drawing.The rate shall include cost and conveyance of all materials including end and top ridges, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity1343.16

Rate-

Amount -

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m².The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity54.71

Rate-

Amount -

Providing and fixing single skin system with Insulation having external shall be made of 0.45mm BMT (0.50mm TCT excluding paint), Steel Grade of G550 (min 550 yield strength, 1000-1015mm effective cover width with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg of Trimdek or equivalent. The base steel sheet shall be coated with zinc-aluminium alloy Zincalume (i.e. 55% Al, 43.4% Zinc, 1.6% Si), class AZ150- minimum of 150 g/m² coating total on both sides, pre-painted with (Paint system - Resin and pigments used) exterior quality XRW paint system of Super Durable Polyester resin with stable inorganic pigment with no lead contents for colour durability, high solar reflectance Index (SRI) - Thermatech technology for cool comfort, of Colorbond XRW steel or equivalent shall conforms to general requirement of IS 15965 class 3/ AS/NZS 2728 type 4 durability value of Tata BlueScope Steel make or equivalent. The sheet shall be free from defects and brand marking of the manufacturer giving product details on the back of the sheet at regular interval confirming genuinity of the material. The steel sheet shall be fastened with min 25µm mechanically plated zinc-tin alloy coated, hex head, self-drilling screw, with EPDM washer Roofix/Buildex equivalent conforms to AS 3566 Class-. In-between the two sheets, 50mm (insulation specification) thick, density 24kg/m3 Glass wool with or without facing as per design requirement complying with IS 8183 BS-3958 Part-5. ASTM C592-80 approved by engineer in-charge shall be laid uniformed over vapour barrier/wire mesh..(The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity1022.57

Rate-

Amount -

Providing and fixing ridge/ valley capping/flashing in required width (upto maximum 600 mm) with plain galvalume colour coated sheet made out of 0.50mm TCT, minimum 300 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms /sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all mat erials, scaffolding, lead, lift, labour charges etc. complete at all levels as directed by Engineer-in-Charge

Quantity107.82

Rate-

Amount -

Quantity120.12

Rate-

Amount -

Supply and Installation of pre insulated sandwich puf panel having core with pre-painted galvanised Trapezodial sheet of approved make.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Top sheet thickness:0.50 mm,Top sheet colour:offwhite Bottom sheet thickness:0.50 mm, Bottom sheet colour:offwhite, Puf density: 40kg/m3 (+/ 2kgs) Core thickness: 50 mm insulation.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity837

Rate-

Amount -

Providing and fixing of LYSAGHT SMARTDEK 51 or equivalent structural decking panel shall be 960 mm effective cover width profile with 51 mm deep ribs, pitch of 316 mm centre-to-centre, with 3mm deep and 19 mm long embossment on either side of webs which are diagonally opposite to each other, the top embossment on is 1.5mm deep and 15.21mm wide provide the mechanical interlocking between the steel and concrete ensuring adequate composite action between steel and concrete. The panel shall have v” shape of 10mm deep on rib and pan as a stiffener and male and female interlocking at side lap. The feed material shall be 1.2mm Base Metal Thickness (i.e. excluding coating thickness) with zinc coating of Z275 (275g/m2 minimum coating mass), 550 MPa Yield strength grade confirming to IS513 or ASTM A653M. The required accessories (edge forms /flashing) shall be made of same material of decking panel. Shear studs shall be used with SMARTDEK or equivalent metal decking with steel beam structure or as per manufacture recommendation. The sheeting shall be fixed according to manufactures recommendation. The deck sheets shall be supplied in required sizes according to the cutting schedule. Generally cutting of sheets to length shall not be permitted at site. Power tools shall be used for cutting. Cutting and trimming of small openings which were not finalized at the time of working drawings can be allowed at site. No gas cutting shall be done on the sheet. Before installing decking sheet, it shall be ensured that the beam support is in true planes, correctly placed and securely fixed. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity1439.73

Rate-

Amount -

SH : FINISHING WORKS 6 mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity930.97

Rate-

Amount -

12mm cement plaster of mix 1:4 (1 cement : 4 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity13425.33

Rate-

Amount -

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity1509.5

Rate-

Amount -

12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity548.76

Rate-

Amount -

15mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity5768.68

Rate-

Amount -

Providing control joints in 6mm Width X 10 mm depth at 3M X 4M panels. along the length and breadth of the entire screed area. The joint can be provided by using a saw cutting machine attached with a 3 mm blade within 18-24 hrs of application of the screed. 28- 30 days later, these joints can be filled with one-part moisture-curing Polyurethane Sealant.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity1918.35

Rate-

Amount -

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity19194.78

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity18199.12

Rate-

Amount -

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two or more coats to acheive an even coat.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity13328.09

Rate-

Amount -

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sq.m over and including priming coat of exterior primer applied @ 2.20 kg/10 Sq.m).The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity7295.25

Rate-

Amount -

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity1028.36

Rate-

Amount -

Providing and applying protective coating on external steel structures two coats of aliphatic polyurethene of 35 microns each per coat with not less than 45% volume solids and DFT of 35 micron each over a base coat of fast drying, high solids two pack epoxy coating not less than 80% volume solids of DFT 130 microns with primer coat of two pack epoxy not less than 71% volume solids and a DFT of 50microns or equivalent.All steel surface to be cleaned throughly withstrong detergents and high pressure fresh water to remove oil, grease, salt and contaminations.All areas to be blast cleaned to Sa2.5(ISO8501-1:2007) before applying primer . The rate shall including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineering- Charge at all levels.

Quantity6922.15

Rate-

Amount -

Finishing walls with textured interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 Sq.m) over and including priming coat of exterior primer applied @ 2.20kg/10 Sq.m.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity806.11

Rate-

Amount -

SH: WATERPROOFING AND MISCELLANEOUS WORK Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/Sq.m mixed with water proofing cement compound @ 0.253 kg/ Sq.m. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/Sq.m mixed with water proofing cement compound @ 0.126 kg/Sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.,leakage testing by ponding etc complete.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity468.57

Rate-

Amount -

Providing and applying waterproofing treatment with a 3mm thick polymer-modified Bituminous membrane of Approved make. Atactic Poly-Propylene (APP) based with UV resistant, ground chemical resistant, high melting points, flexible and elastic with high adhesive strength. The membrane shall be reinforced with nonwoven polyester reinforcement of a minimum of 160 gm/Sq.m including carving the corner by torch welding over the primer with the overlap of 100 mm and appropriately pressing the membrane to remove any entrapped air. The termination of the membrane at 30 cm above the vertical wall.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity3682.53

Rate-

Amount -

Providing ,supplying and applying Chemical crystalline of approved make for waterproofing of water tank.The chemical should be mixed with mortar made of fine aggregate and cement on the concrete floor/Surface. Precautions should be taken such that there is no water or wetness seen on the slab while applying the mix. The mix has to be applied on the wall and the water tank has to be left to curing for a minimum of 24 hrs without any activities. After curing, water has to be filled in for observation for a minimum of 24 hrs to assure a leak proof finish as per the manufacturer specification including cost and conveyance of all material to site, lead, lift, and hire charges for scaffolding, labour charges etc. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity107.84

Rate-

Amount -

Providing and applying integral crystalline slurry of hydrophilic in nature forwaterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducingpermeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm.For horizontal surface one coats @1.10 kg per Sqm. The work shall be carried out all complete as per specification. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. The product performance shall carry a guarantee for 10 years against any leakage. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity1087.03

Rate-

Amount -

Providing and applying integral crystalline slurry of hydrophilic in nature forwaterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducingpermeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The workshall be carried out all complete as per specification.For vertical surface two coats @0.70 kg per sqm. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. The product performance shall carry guaranteefor 10 years against anyleakage.(The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity643.02

Rate-

Amount -

Providing and laying PVC membrane waterproofing system over the vertical side for retaining wall Installing geotextile of 300gsm as correction layer, over the vertical side of the wall, before installation PVC membrane 2mm thick of approved manufactor shall conform to the physical and chemical properties such as: Elongation at break (300percentage) UNI EN ISO 527-3 or equivalent, Ultimate Tensile Strength ( 16.7 N/mm²), Puncture resistance ( 1100mm) DIN 16726-5.12 or equivalent, Hydrostatic pressure Waterproof UNI EN 1928 resistance (6 hours at 5 bar) or equivalent on vertical side, providing and fixing suitable arrangement for fixing mechanically onto the vertical wall to hold the membrane in vertical position against sagging dueto self weight of the membrane and without damaging the PVC membrane and providing and Installing 2mm thick synthetic membrane of plasticized PVC with double seam welding of PVC waterproofing membrane joints and pressure testing of the same to 2 bars up to 10 minutes and with compartmentalization by welding PVC water stop with welding fins at all construction joints and at strategic locations to make a compartment of 200 sqmtrs pre installed with required number of injection flanges in every compartment fitted with inlet / outlet pipe and surface access box. The cost shall include the cost for providing and Installing a minimum protection layer of 300gsm or 25mm thick EPS protection boards over the vertically installed PVC waterproofing membrane, on the vertical face of the retaining wall to act as a protection layer against backfill and all pressure release mechanism etc complete as directed by the Engineer In Charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. (The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years). Only skilled and experienced persons shall be employed for this purpose. Only external surface area of retaining wall will be measured.

Quantity311.74

Rate-

Amount -

Providing and laying PVC membrane waterproofing system in horizontal plane including adjustment layer to take up any surface irregularities of the substrate, in order to avoid any imperfections or foreign particles damaging the waterproof layer. It shalll composed of geotextile, weight of 300 g/m2, laid in dry conditions with edge overlap of 10/15 cm. Synthetic membrane of plasticized PVC, 2mm thick of approved manufacturer shall conform to the physical and chemical properties such as: Elongation at break (300%) UNI EN ISO 527-3 or equivalent, Ultimate Tensile Strength ( 16.7 N/mm²), Puncture resistance ( 1100mm) DIN 16726-5.12 or equivalent, Hydrostatic pressure Waterproof UNI EN 1928 resistance (6 hours at 5 bar) or equivalent. Double seam welding of PVC waterproofing membrane joints shall be pressure tested to 2 bars of 10 minutes .The waterproofing project to be divided into sectors if required and it is composed of shaped joints of PVC and it is welded to the existing waterproof liner. The rate shall be inclusive of providing and laying protection layer of non-woven 300gsm geo-textile membrane over the laid PVC waterproof membrane system, followed by a cement mortar screed of 50mm thick over the top layer of geo-textile membrane to facilitate the placing and tying of reinforcement bars of raft and all pressure release mechanism etc complete as directed by the Engineer-In-Charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. (The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years). Only skilled and experienced persons shall be employed for this purpose.The 50mm thick cement mortar shall be measured seperately. Plan area only to be measured for the payment.

Quantity42.18

Rate-

Amount -

Providing and supplying heavy duty injection adhesive for rebar fixing using Epoxy resin of 330/500ml HILTI HIT-RE 500 V3/or equivalent for fixing rebar.Embedment depth as mentioned from the Structural consultants, including supplying two component system consisting of resin and hardener in 3:1 ratio; filling above mentioned mortar with standard dispenser before inserting rebar strictly as per the manufacturers recommendations.The installation and the setting instructions should be strictly followed as per the manufacturers recommendations.The chemical anchor shall carry ETA, COLA and DIBT approval and fire approval. Application can be done in both wet & dry concrete condition, corrosion tested. The approved chemical shall be installed in hammer drill, diamond coring holes , including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) 8mm Dia

Quantity60

Rate-

Amount -

Quantity60

Rate-

Amount -

Quantity60

Rate-

Amount -

Quantity60

Rate-

Amount -

Quantity60

Rate-

Amount -

Providing and supplying heavy duty pres difined ration 3:1 ETA, COLA, and DIBT approved injection adhesive for anchor fixing in Wet/Dry conditions using 330/500ml HIT-RE 500 V4 or Equivalent. Application may include highly critical structural extensions (beam, column extension), retrofitting, etc; The system should be made of two foils consisting of resin and Hardener foil pack.The system can be used for rebar fixing or insert plate fixing using threaded rods HIT V rods of Galvanised Steel of 5.8 grade.The chemical anchor shall be ETA approved, cracked concrete & seismic ETA C1/C2 approved, Can be used in both wet & dry concrete condition, corrision tested and shall carry fire approval as well. The same shall be installed in hammer drill, diamond coring holes & complaint with safeset technology with hollow drillbit and roughning tool. Also the chemical shall have 100years service life.The installation and the setting instructions should be strictly followed as per the manufacturers recommendations. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) HIT RE 500V4 Chemical + Anchor rod HIT-V- 8.8 M20X300 ; embedment depth -200mm

Quantity176

Rate-

Amount -

Providing and fixing in position medium duty FRP. manhole cover and frame of required shape and approved quality for inspection chamber / manhole / gulley trap / and other required places. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.

Quantity25

Rate-

Amount -

Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity394.2

Rate-

Amount -

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity254

Rate-

Amount -

Providing & fixing self adhesive tarfelt sheet in single layer over corrugated metal roofing sheets. Bitumen Felt to be laid over existing metal sheet or any other place as directed as per existing details. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity10.5

Rate-

Amount -

Providing and fixing in position heavy duty FRP. manhole cover and frame of required shape and approved quality for inspection chamber / manhole / gulley trap / and other required places.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity72

Rate-

Amount -

SH: INTERIOR WORKS Providing and fixing 20mm thick stone cladding of approved,quality and material of matt/glossy finish over finished surfaces of walls using approved qulaity adhesive in all heights and levels as per the approved drawings and direction of Engineer-In-Charge. The exposed surface shall be finished with 100% Aliphatic Polyurethane (PU) coating. Sample shall be approved prior to procurement. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Purchase rate : Rs. 1484 / Sqm

Quantity175.09

Rate-

Amount -

Providing and fixing 20mm thick laterite stone cladding of approved,quality and material of matt finish over finished surfaces of walls using approved qulaity adhesive in all heights and levels as per the approved drawings and direction of Engineer-In-Charge. The exposed surface shall be finished with 100% Aliphatic Polyurethane (PU) coating. Sample shall be approved prior to procurement. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Purchase price :Rs.1130 per Sqm

Quantity74.44

Rate-

Amount -

Providing and fixing wall panelling with 6mm thick Exterior Grade HPL Sheet of approved make in wood grain shade over framing work with Aluminium sections as per approved drawing including cutting sheet to required size panels,all necessary rivets, self screws, self bolts,anchor fasteners,Al profiles,finishing of joints with suitable sealents etc all complete as per the dirextion of Engineer-In-Charge. 10 Year warranty must be provided for the material and workmanship.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity95.24

Rate-

Amount -

Providing and fixing TV unit made of 18mm thick marine plywood with selected Laminated finish of 1mm thickness on Exposed areas and Carcass with Liner laminate of 0.8mm thickness . Shutters made with 18mm thick plywood finished with selected laminate of 1mm thickness. Edges finished with 2mm thck PVC lipping of selected brand to match colours of laminate selected. All neccessary hardwares and accessories like Soft close hinges and fittings should be provided as per the design and drawings.The rate is inclusive of all cost, conveyance and unloading at site and stacking of all materials, all labour, scaffolding etc complete as per the direction of Engineer in charge.

Quantity12.5

Rate-

Amount -

Providing and fixing wardrobe unit and luggage rack made of 18 mm thick marine plywood with selected Laminated finish of 1mm thickness on Exposed areas and Carcass with Liner laminate of 0.8mm thickness .Shutters made with 18mm thick plywood finished with selected laminate of 1mm thickness. Edges finished with 2mm thck PVC lipping of selected brand to match colours of laminate selected. All neccessary hardwares and accessories like Soft close hinges, telescopic drawer channel, handles , hanging rod and other fittings should be provided as per the design and drawings.The rate is inclusive of all cost, conveyance and unloading at site and stacking of all materials, all labour, scaffolding etc complete as per the direction of Engineer in charge.

Quantity40.32

Rate-

Amount -

Providing and fixing pantry unit made of 18 mm thick marine plywood with selected Laminated finish of 1mm thickness on Exposed areas and Carcass with Liner laminate of 0.8mm thickness .Shutters made with 18mm thick plywood finished with selected laminate of 1mm thickness. Edges finished with 2mm thck PVC lipping of selected brand to match colours of laminate selected. Top to be laid with granite 20mm thick, edges to be champhered. Also providing and fixing wooden ledge made of double ply covered with selected laminate and fixed on to the wall with hidden supports. Groove to be provided to fix Light profile of 10mm size at the back of the ledge. All neccessary hardwares and accessories like Soft close hinges, telescopic drawer channel, handles and other fittings should be provided as per the design and drawings.The rate is inclusive of all cost, conveyance and unloading at site and stacking of all materials, all labour, scaffolding etc complete as per the direction of Engineer in charge.

Quantity11.55

Rate-

Amount -

Providing and fixing Wash counter unit made of 17mm multiwood for boxing and shutter works finished with 1 mm l laminate for shutters and outer surfaces , inside to be lined with 0.8mm liner laminate .Top to be laid with granite 20mm thick, edges to be champhered. All neccessary hardwares and accessories like Soft close hinges, handles and other fittings should be provided as per the design and drawings.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity6.35

Rate-

Amount -

Providing & fixing 9 mm thick BWP grade ply confirming to IS- 710 on existing Aluminum frame work for column , wall cladding etc using approved size screws at every 600 mm center to center at all levels as per drawing.The ply shall be fixed in correct line and level as per drawing. The rate shall include the cost & conveyance of all materials, labour charges,levelling, lead, lift , cutting any shapes , provisions for electrical, networking fixtures wherever required, etc complete as directed by Engineer in Charge at all levels.

Quantity97.52

Rate-

Amount -

Design,supplying and fixing in position Fluted /Louvers panels as per drawing. The core of the fulted/Louver panels shall be PVC composite material and the finish shall be of wooden finish . Each panel shall be of size 3060X230mm and the thickness of the panel shall be 1.20mm.Panel shall be fixed to plywood backing .(The cost of the plywood backing shall be paid seperately). Exposed edges of the Fluted /Louvers panels shall be protected with corner/Edge/T trim of matching shade. The cost shall be inclusive of all material,acessories, fixing screws, conveyance, lead , lift, etc complete at all levels as directed by Engineer in charge.The purchase price ( excluding tax)of panel to be considered as Rs 1453/sqm any deviation plus or minus in the purchase price( excluding tax) in approved shade will be adjusted while making payment to the contractor.Dismantling ,Removing,Leading to allocated locations,Refixing of Existing Collars of Air terminal devices including Air distribution System as per the instructions of Engineer in charge shall be in the scope of works.The contractor shall making the cut outs for HVAC grills/diffusers/service access doors, electrical/fire fighting/CCTV appliances etc wherever necessary.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. The above work shall be carried out by an agency having sufficient experience and should ensure a warranty for a period of 10 years .Only skilled and experienced persons shall be employed for this purpose.

Quantity97.52

Rate-

Amount -

Providing and fixing Vinyl graphics including 3M printable self adhesive vinyl, with Latex print over 2mm pvc foam board fixing directly on the wall. The graphics/design shall be approved by the Engineer in charge prior to the printing.Rate to be inclusive all necessary hardwares, Screw etc all complete as per the Architectural drawings, as specified and as directed.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity103.43

Rate-

Amount -

Supply Main/Sheer curtain and sttitch it as pleated style , install it in a Heavy Duty M track(Brand-Slide Impex) with side cap,Noice less wheel Runner,First Quality PVC pull batten.(The base rate of material - Rs. 400 / Mtr ).The rate is inclusive of cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity248.4

Rate-

Amount -

Providing and fixing Badminton pole and nets in international standards including all material and labour for fixing 1.55 m high uprights made from 40mm dia and 5mm thick steel with polyster powder coating. The net (Garware / Equ make ) shall made of 3mm HDPE twine to ensure better knot stability and specially treated to provide resistance to UV degradation ensuring high durability.The post should be BWF Approved material. All the works has to be carried out by certified sports area manufactures as per the approved design and direction of Engineer-In-Charge.All works must be executed by authorised agency/vendor approved by the Engineer-In-Charge

Quantity2

Rate-

Amount -

Supplying and Installing ITTF approved Foldable table for Table Tennis. The playing surface of the table shall be rectangular, 2.74 m long and 1.525m wide, and shall be in a horizontal plane 76cm above the finished floor.The thickeness of top shall be 25mm with 20 x 50mm frame size and 50 x 50 mm leg size.The playing surface shall be divided in to two equal courts by a vertical net running parallel with the end lines and shall comply with EN NORM 14468-1.The ITTF approved TT S5 rubbers Bat uses a 2.0 mm sponge and the acs-technology and 5+2-ply blade has a concave handle with excellent comfort and grip.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge All the works has to be carried out by certified sports area manufactures as per the approved design and direction of Engineer-In-Charge. Purchase price :Rs.65000 per Piece

Quantity2

Rate-

Amount -

SH: OTHER WORKS Fixing ISOWALL 50 mm thick EPS, both side GI coated sheet panels for wall and ceiling, making return air boxing & access door with necessary angles, sealant etc.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Quantity249.84

Rate-

Amount -

Supply of pre-painted or coil coated laminated aluminium sheet of total thickness 2mm with fluorocarbon based (PVDF/ FEVE) coating applied through a reverse roller coating process on continuous color coating line. The weight of the panel should be 5.5 kg/m2 (±10%).The aluminium panel top and bottom skin should confirm to alloy 3105 series and H24 temper with mechanical properties confirming to EN 485-2 standard. The top coated surface shall comply with the “specification for coated coil for the exterior building application” issued by ECCA (European Coil Coating Association). The coating shall confirm to AMMA-2605 for superior performing of exterior grade finish. The external cladding panel surface shall be in-house factory prefinished by the manufacturer with a fluorocarbon based (PVDF/ FEVE) coating applied through a reverse roller coating process on continuous color coating line. The manufacturer should have minimum 5 years of inhouse coil coating experience and thereby submit proof of same.Approved coil coating applicator certificate needs to be submitted by the manufacturer. The manufacturer should have inhouse quality control lab with calibrated testing equipment from NABL accredited third party.The reverse side of the cladding panel surface facing the wall shall be in mill finish / service coat. Application of the coating system by means of powder / spray coating after forming and shaping of the cladding elements shall not be permitted. The finished surface shall be protected with a selfadhesive (Rubber based) peel off foil with 70 microns thickness white or black, tested to withstand upto 6 months exposure to standard weather condition without losing the original peel off characteristic or causing stain or other damages on the coated surface of the aluminium composite panel.The panels shall be manufactured with quality management system and manufacturing processes which are eco-friendly to the nature, conformity to ISO 9001:2015 (Quality management systems), ISO 14001:2015 (Environmental management systems) & ISO 45001:2018 (Occupational health and safety management systems) certifications of the panel manufacturer.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Quantity1245.6

Rate-

Amount -

SH : DISMANTLING & DEMOLITION WORKS Pile chipping and removing top excess lengths of RCC piles of 450m dia in same lines and levels as per structural details/instructions till sound concrete is met with, without damaging the remaining portion of pile, including chipping of the concrete, cutting of the ties reinforcement, conveying the cut bit of the reinforcement and stacking the same within the plot, removing debris away from the project site etc, complete including all labour charges and hire charges of tools and plants. but depth of cut pile up to 5.0m, complete as per directions of Engineer-in-charge.

Quantity260.25

Rate-

Amount -

Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity2325

Rate-

Amount -

Cutting and removal of 8 mm thick M.S. liners for piles of 450mm diameter as per detailed drawings and designs.The rate is including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity1572.3

Rate-

Amount -

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity5.73

Rate-

Amount -

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity12.14

Rate-

Amount -

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity3

Rate-

Amount -

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity859.69

Rate-

Amount -

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity28.67

Rate-

Amount -

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity41.27

Rate-

Amount -

Quantity1118.08

Rate-

Amount -

Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity10.5

Rate-

Amount -

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity10.4

Rate-

Amount -

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity10

Rate-

Amount -

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:Channels, angles, tees and flats.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity100

Rate-

Amount -

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity100

Rate-

Amount -

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Quantity100

Rate-

Amount -

SH : SANITARY FIXTURES & FITTINGS Providing and fixing white vitreous china wall mounted type water closet (European type) with soft close duroplastic seat and lid of approved make and model, etc. complete, including cost and conveyance of all materials, labour charges, lead, lift, fixing to the frame of concealed flush tank, cutting and making good the walls and floors wherever required, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of WC pan with soft close seat and lid including all acessories shall be taken as Rs. 15250/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).W.C. pan with white soft closing duroplastic seat and lid

Quantity19

Rate-

Amount -

Providing and fixing white vitreous china wall mounted type water closet (European type) with soft close duroplastic seat and lid of approved make and model, etc. complete, including cost and conveyance of all materials, labour charges, lead, lift, fixing to the frame of concealed flush tank, cutting and making good the walls and floors wherever required, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. (The purchase price of WC pan with soft close seat and lid including all acessories shall be taken as Rs. 21413/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. W.C. pan with white soft closing duroplastic seat and lid

Quantity10

Rate-

Amount -

Providing and fixing Concealed Flushing Cistern with full frame for EWC with dual flushing system 3 / 6 litres with all accessories, actuator plate of approved make and model etc. complete including cost and conveyance of all materials, labour charges, lead, lift, cutting and making good the walls wherever required, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels.The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of flushing cistern including all acessories shall be taken as Rs. 4140/- and purchase price of actuator plate including all acessories shall be taken as Rs. 3600/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity29

Rate-

Amount -

Providing and fixing white vitreous china Wall Hung Urinal with built-in sensor (DC Type), of approved size with all accessories to provide satisfactory functioning, including necessary wall cutting / chasing and making good, waste connection and clamps, including all fittings as required for urinal flushing etc. complete, cost and conveyance of all materials, labour charges, lead, lift, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels.. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of Wall Hung Urinal with built-in sensor (DC Type) including all acessories shall be taken as Rs. 22385/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity18

Rate-

Amount -

Providing and fixing complete set of sanitary fixtures for handicapped toilets, make of Cera "Crane" / Hindware Cat. no. 70002) / or approved equivalent comprising of EWC - P, Cistern, Seat Cover, Twin Flush Fittings, Wash Basin 450x300, Half pedestal, 1 faucet with spatula lever, 1 hinged rail and 2 grab bars, including cutting and making good the walls and floors wherever required, cost and conveyance of all materials, labour charges, lead, lift, etc. complete, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of urinal division plate including all acessories shall be taken as Rs. 46540/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity2

Rate-

Amount -

Providing and fixing Counter Top Wash Basin 600 x 380 x 70 mm, or approved size and quality, 32 mm CP Brass waste assembly, 15 mm C.P. brass mixer taps, including cutting and making good the walls and floors wherever required, cost and conveyance of all materials, labour charges, lead, lift, etc. complete, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of counter top wash basin including all acessories shall be taken as Rs. 10944/-, waste coupling Rs. 1955/- and 15 mm CP bras mixer taps Rs. 8242/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).. White Vitreous China Counter Top Wash Basin rectangular size with single 15 mm C.P. brass mixer tap

Quantity51

Rate-

Amount -

Providing and fixing Counter Top Wash Basin 600 x 380 x 70 mm, or approved size and quality, 32 mm CP Brass waste assembly, 15 mm C.P. brass mixer taps, including cutting and making good the walls and floors wherever required, cost and conveyance of all materials, labour charges, lead, lift, etc. complete, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of counter top wash basin including all acessories shall be taken as Rs. 10944/-, waste coupling Rs. 1955/- and 15 mm CP pillar cocK RS 3179/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity9

Rate-

Amount -

Providing and fixing of Wall Mount Wash basin with CP Brass Bottle trap, Vitreous, Glazed, of selected Color, with CP Brass Screws & Nuts conforming to IS 2548-1967 15mm dia flexible water inlet pipe including Wash Basin (Wall Bracket mounting), Bottle Trap, Pillar Cock, Angle Cock (15mm dia with wall flange),, cost and conveyance of all materials, labour charges, lead, lift, etc. complete, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of Wall Mount Wash Basin including all acessories shall be taken as Rs. 3464/-, 15 mm C.P. pillar cock Rs. 3179/- and C.P. brass waste coupling 32 mm Pop up waste for basin without over flow slot Rs. 1955/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity4

Rate-

Amount -

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make including, cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The purchase price of CP Brass 32mm size Bottle Trap including all acessories shall be taken as Rs. 884/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Quantity60

Rate-

Amount -

Providing and fixing C.P. Brass Health Faucet with chrome plated flexible tube 1.0 metre long with SS cup and wall hook etc, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of C.P. Brass Health Faucet with chrome plated flexible tube including all acessories shall be taken as Rs. 1300/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity19

Rate-

Amount -

Providing and fixing C.P. Brass Health Faucet with chrome plated flexible tube 1.0 metre long with SS cup and wall hook etc, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of C.P. Brass Health Faucet with chrome plated flexible tube including all acessories shall be taken as Rs. 2745/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity10

Rate-

Amount -

Providing and fixing gloss white cast acrylic construction reinforced marble freestanding bath tub 1700 x 800 x 565 or nearest size with slip resistant surface, of approved quality and make, waste coupling, bath tub over flow with floor flange accessory pack, pop up waste, masonry / concrete supports, etc. complete including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The purchase price of gloss white cast acrylic construction reinforced marble freestanding bath tub including all acessories shall be taken as Rs. 63894/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Quantity10

Rate-

Amount -

Providing and fixing superior quality 15mm dia CP concealed diverter 4 way, of approved make and model, including cost and conveyance of all materials, labour charges, lead, lift, cutting and making good the walls and floors wherever required, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. (The purchase price of CP concealed diverter 4 way including all acessories shall be taken as Rs. 9625/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Quantity10

Rate-

Amount -

Providing and fixing superior quality 15mm dia CP bath tub spout, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The purchase price of CP bath tub spout including all acessories shall be taken as Rs. 5160/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Quantity10

Rate-

Amount -

Providing and fixing superior quality CP Bath & Shower mixer set for Bathtub, of approved make and model, including cost and conveyance of all materials, labour charges, lead, lift, cutting and making good the walls and floors wherever required, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. (The purchase price of CP Bath & Shower mixer set including all acessories shall be taken as Rs.7950/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Quantity10

Rate-

Amount -

Providing and fixing C.P. brass Ceiling Mounted Over Head Shower with 15 or 20 mm inlet of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The purchase price of C.P. brass Ceiling Mounted Over Head Shower including all acessories shall be taken as Rs. 4740/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. 220 mm diameter

Quantity10

Rate-

Amount -

Providing and fixing electrically operated storage water heater 50 litres with MS sheet glass lined vessel with 2.kw heating element, auto-thermostatic switch, neon indicator lamp, pressure release valve etc., of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The purchase price of electrically operated storage water heater 50 litres including all acessories shall be taken as Rs. 12000/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and only skilled and experienced person shall be employed for this purpose.

Quantity10

Rate-

Amount -

Providing and fixing CP Brass towel rail complete with brackets fixed to grips with CP brass screws with concealed fittings arrangement etc, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of CP Brass towel rail including all acessories shall be taken as Rs. 1375/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).450 mm long towel rail with CP cup

Quantity31

Rate-

Amount -

Providing and fixing CP Brass towel ring complete with brackets fixed to grips with CP brass screws with concealed fittings arrangement etc, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The purchase price of CP Brass towel ring including all acessories shall be taken as Rs. 1350/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. CP towel ring with CP cup

Quantity10

Rate-

Amount -

Providing and fixing CP Brass towel rack complete with brackets fixed to grips with CP brass screws with concealed fittings arrangement etc, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The purchase price of CP Brass towel rack including all acessories shall be taken as Rs. 2600/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. 600 mm long towel rack with CP cup

Quantity10

Rate-

Amount -

Providing and fixing CP brass toilet paper holder and accessories etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The purchase price of CP brass toilet paper holder including all acessories shall be taken as Rs. 584/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. C.P. brass

Quantity30

Rate-

Amount -

Providing and fixing CP Brass soap Dish Holder with CP concealed fittings and accessories etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of CP Brass soap Dish Holder including all acessories shall be taken as Rs. 1400/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity18

Rate-

Amount -

Providing and fixing Automatic Liquid Soap Dispenser of capacity 0.8L, aluminium / ABS body with chrome / black finish etc. complete with brackets fixed to grips with CP brass screws with concealed fittings arrangement etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of Automatic Liquid Soap Dispenser including all acessories shall be taken as Rs. 2800/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity30

Rate-

Amount -

Providing and fixing Liquid Soap Dispenser, aluminium / ABS body with chrome / black finish etc. complete with brackets fixed to grips with CP brass screws with concealed fittings arrangement etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The purchase price of Automatic Liquid Soap Dispenser including all acessories shall be taken as Rs. 1295/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Quantity10

Rate-

Amount -

Providing and fixing CP brass twin coat hook with concealed fittings arrangement etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.(The purchase price of CP brass twin coat hook including all acessories shall be taken as Rs. 600/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity30

Rate-

Amount -

Providing and fixing C.P. brass long nose bib cock conforming to IS standards and weighing not less than 810 gms of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels.The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of C.P. brass long nose bib cock including all acessories shall be taken as Rs. 618/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). 15 mm nominal bore

Quantity26

Rate-

Amount -

Providing and fixing C.P. brass angle valve for basin mixer and geyser points conforming to IS:8931 of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of C.P. brass angle valve including all acessories shall be taken as Rs. 712/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). 15mm nominal bore

Quantity117

Rate-

Amount -

Providing and fixing 600x450 mm beveled edge mirror of superior glass complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels.The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The purchase price of 600x450 mm beveled edge mirror including all acessories shall be taken as Rs. 1284/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity61

Rate-

Amount -

Providing and fixing Single lever Diverter with Over head shower fittings arrangement etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.(The purchase price of concealed part RS exposed part RS Over head shower RS Shower arm brass and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity5

Rate-

Amount -

Providing and fixing Gyser 30 Ltr with flexible connection fittings arrangement etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.(The purchase price of 30 Ltr Gyser shall be taken as Rs. 11500/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Quantity5

Rate-

Amount -

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore. , cost and conveyance of all materials, labour charges, lead, lift, etc. complete, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels.

Quantity90

Rate-

Amount -

SH: COLD / HOT / FLUSHING WATER SUPPLY (INTERNAL-EXPOSED ON WALL) Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal inner dia Pipes

Quantity164

Rate-

Amount -

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal inner dia Pipes

Quantity115

Rate-

Amount -

Quantity155

Rate-

Amount -

Quantity225

Rate-

Amount -

Quantity195

Rate-

Amount -

Quantity175

Rate-

Amount -

Quantity55

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Quantity110

Rate-

Amount -

Quantity410

Rate-

Amount -

Quantity50

Rate-

Amount -

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal inner dia Pipes

Quantity115.96

Rate-

Amount -

Quantity117

Rate-

Amount -

Quantity111

Rate-

Amount -

Quantity42

Rate-

Amount -

Quantity885

Rate-

Amount -

Quantity1101

Rate-

Amount -

Quantity45

Rate-

Amount -

Supplying, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal gate valve with C.I. wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 20 mm nominal bore

Quantity91

Rate-

Amount -

Quantity23

Rate-

Amount -

Quantity9

Rate-

Amount -

Quantity12

Rate-

Amount -

Quantity7

Rate-

Amount -

Quantity6

Rate-

Amount -

Quantity4

Rate-

Amount -

SH: INTERNAL DRAINAGE (SOIL, WASTE & VENT) Providing, jointing, testing and fixing UPVC Soil, Waste & Vent pipework conforming to IS : 13592 Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials, jointing done with solvent cement for fittings and specials, fixing inside sunken slab / suspended below RCC slab for concealed soil and waste lines, making proper connection and also pipes may be laid / fixed in sunken floors, under hung from ceiling. The pipes laid in sunken floor shall be supported with cement concrete (1:2:4) blocks and under hung lines shall be supported from slab with universal clamps. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All GI pipe supports to hold the pipes is included in this item). 75 mm dia Type B

Quantity160

Rate-

Amount -

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent pipework conforming to IS : 13592 Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials, jointing done with solvent cement for fittings and specials, fixing inside sunken slab / suspended below RCC slab for concealed soil and waste lines, making proper connection and also pipes may be laid / fixed in sunken floors, under hung from ceiling. The pipes laid in sunken floor shall be supported with cement concrete (1:2:4) blocks and under hung lines shall be supported from slab with universal clamps. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All GI pipe supports to hold the pipes is included in this item). 110 mm dia Type B

Quantity160

Rate-

Amount -

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent pipework conforming to IS : 13592 Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials, jointing done with solvent cement for fittings and specials, fixing at wall / ceiling level supported by galvanized steel slotted rails, threaded rods, clamps, hangers etc., making proper connection etc for duct and ceiling suspended soil and waste lines. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All major MS / GI supports to hold the stack is included in this item). 75 mm dia Type B

Quantity70

Rate-

Amount -

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent pipework conforming to IS : 13592 Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials, jointing done with solvent cement for fittings and specials, fixing at wall / ceiling level supported by galvanized steel slotted rails, threaded rods, clamps, hangers etc., making proper connection etc for duct and ceiling suspended soil and waste lines. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All major MS / GI supports to hold the stack is included in this item). 110 mm dia Type B

Quantity150

Rate-

Amount -

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent pipework conforming to IS : 13592 Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials, jointing done with solvent cement for fittings and specials, fixing at wall / ceiling level supported by galvanized steel slotted rails, threaded rods, clamps, hangers etc., making proper connection etc for duct and ceiling suspended soil and waste lines. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All major MS / GI supports to hold the stack is included in this item). 160 mm dia Type B

Quantity125

Rate-

Amount -

Providing, fixing, jointing and testing UPVC soil, waste, vent pipework comprising UPVC pipe conforming to IS :4985-1983 of class 3 ( 6kg/cm2) as specified below and fittings (moulded as well as fabricated) like elbows, bends, reducers, threaded tail pieces, caps, suitable elbow with suitable extension piece for drain point and other specials jointing with cement solvent, chasing, cutting and making good the walls & floors pipes laid in floors shall be encased with 40 mm thick concrete all around, complete in all respects including testing of complete installation for cocealed drain lines. (All major MS / GI supports to hold is included in this item) 40 mm dia 6 kg/cm2 (Class III )

Quantity30

Rate-

Amount -

Quantity105

Rate-

Amount -

Providing, fixing, jointing, testing and commissioning UPVC (Class III) Rain water downtake pipe conforming to IS:4985 cut to required lengths including all necessary fittings and specials.UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offsets and other specials. Fixing at wall/ceiling level supported by galvanized steel slotted rails, threaded rods, clamps, hangers etc. Making proper connection with cement solvent joint as per BIS / manufacturer. Cutting, chases / holes in floors / walls / slab and making good wherever required. (All major MS / GI supports to hold the stack is included in this item). 110 mm dia. 6 kg/cm2 (Class III)

Quantity122

Rate-

Amount -

Quantity185

Rate-

Amount -

Providing and fixing UPVC/SWR trap (Multi trap) of self cleaning design as per IS:13592 : 1992 complete including cost of cutting and making good the cutouts in walls and floors etc.including cutting and making good the walls and floors wherever required complete. 100 mm inlet and 75 mm outlet.

Quantity219

Rate-

Amount -

Providing and fixing Heavy Class cockroach free SS floor grating of approved design and make, including setting in floor with cement mortar / tile adhesive / epoxy joint filler to match with floor finish, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The purchase price of Heavy Class cockroach free SS floor grating including all acessories shall be taken as Rs. 500/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. Size 125 mm X 125 mm or nearest size

Quantity219

Rate-

Amount -

SH: EXTERNAL SEWAGE/ STORM WATER DRAINAGE Providing, fixing, jointing, testing and commissioning UPVC (Class III) Soil, Waste & Rain Water Drainage pipes conforming to IS:4985 cut to required lengths including all necessary fittings and specials. UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, reducers and other specials including trenching, refilling & testing of joints etc. Making proper connection with cement solvent joint as per BIS / manufacturer, complete as per direction of Engineer in Charge. External work 75 mm dia 6 kg/cm2 (Class III )

Quantity62

Rate-

Amount -

Quantity170

Rate-

Amount -

Quantity425

Rate-

Amount -

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 110 mm dia. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.

Quantity150

Rate-

Amount -

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 160 mm dia. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.

Quantity425

Rate-

Amount -

Supplying, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of PVC gully trap of size 160 x 110 mm and CI grating 150 x 150 mm size and water tight C.I. cover with frame of 300 x 300 mm size (inside), the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cm x 30cm internal size gully trap shamber and depth upto 60cms, 115 thick brick wall in CM 1:6 on a foundation of PCC 1:4:8, 100 mm thick, plastering inside with CM 1:3, 12mm thick with a neat flushing coat and conveying to site, cleaning, installing and testing approved make PVC Gully Trap with 110mm outlet, surrounding with CC 1:1.5:3, 150x150mm, top with CI Grating, above the PVC Gully Trap, and light duty CI cover and frame over the chamber, including cost of all materials, etc. complete as per approved drawing and as directed by the Engineer-in-Charge. 160 x 110 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity25

Rate-

Amount -

Providing, laying, jointing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls wherever necessary, testing of joints, etc complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm dia nominal bore

Quantity10

Rate-

Amount -

Quantity10

Rate-

Amount -

Quantity5

Rate-

Amount -

Quantity7

Rate-

Amount -

Quantity10

Rate-

Amount -

Quantity6

Rate-

Amount -

Quantity1

Rate-

Amount -

Providing, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal non- return valve of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 40 mm nominal bore, Vertical

Quantity16

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity2

Rate-

Amount -

SH: EXTERNAL SEWAGE PUMPING LINES Providing, laying, jointing and fixing HDPE (PE-80) pipes 16kg/cm2 for sewerage, pipes confirming to IS 14333, including all HDPE fabricated and plain fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes by thermal fusion method and testing of joints complete as per direction of Engineer in Charge. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete. Internal work - Exposed on wall 63 mm outer dia Pipes

Quantity10

Rate-

Amount -

Providing, laying, jointing and fixing HDPE (PE-80) pipes 16kg/cm2 for sewerage, pipes confirming to IS 14333, including all HDPE fabricated and plain fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes by thermal fusion method and testing of joints complete as per direction of Engineer in Charge. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete. Internal work - Exposed on wall 90 mm outer dia Pipes

Quantity10

Rate-

Amount -

Providing, laying, jointing and fixing HDPE (PE-80) pipes 16kg/cm2 for sewerage, pipes confirming to IS 14333, including all HDPE fabricated and plain fittings. This includes jointing of pipes by thermal fusion method, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete. External work 75 mm outer dia Pipes

Quantity500

Rate-

Amount -

Quantity20

Rate-

Amount -

Providing, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of Butterfly Valve (Wafer Type), PN-1.6 with S.S-304 Disc, S.G. Iron body, Lever Operated, with Nitrile / EPDM Rubber Lining, of approved quality including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 40 mm dia

Quantity3

Rate-

Amount -

Quantity3

Rate-

Amount -

Quantity3

Rate-

Amount -

SH: WATER SUPPLY PUMPS Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Drinking Water Sump 1 to OHT for Cottage Capacity : 5.5 Litres / sec Head : 12 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Quantity1

Rate-

Amount -

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Drinking Water Sump 1 to UG Sump 2 Capacity : 7.4 Litres / sec Head : 18 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Quantity1

Rate-

Amount -

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete. Cold Water Pump: Drinking Water Sump 2 to OHT for Convention Hall Capacity : 4.7 Litres / sec Head : 18 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Quantity1

Rate-

Amount -

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Drinking Water Sump 2 to OHT for Restaurant Capacity : 4.7 Litres / sec Head : 14 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Quantity1

Rate-

Amount -

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Drinking Water Sump 2 to OHT for Sports Complex Capacity : 4.6 Litres / sec Head : 20 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Quantity1

Rate-

Amount -

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Non Drinking Water Sump to OHT for Convention Hall Capacity : 3.0 Litres / sec Head : 24 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Quantity1

Rate-

Amount -

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Non Drinking Water Sump to OHT for Restaurant Capacity : 3.0 Litres / sec Head : 24 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Quantity1

Rate-

Amount -

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Non Drinking Water Sump to OHT for Sports Complex Capacity : 2.3 Litres / sec Head : 28 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Quantity1

Rate-

Amount -

SH: SEWAGE TRANSFER PUMPS Providing, fixing, testing and commissioning of self priming sewage / dewatering pump monoblock, three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping sewage from sump to sump / STP, the pumps shall be made of CI casing, CI Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.(The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) Sewage Transfer Pump: Sewage Collection Tank 1 to Sewage Collection Tank 3 Capacity : 4.3 Litres / sec Head : 20 Mtrs Type of Pump : Self Priming Sewage / Dewatering Pump Monoblock Total No. of Pump-2No.(1W+1S)

Quantity1

Rate-

Amount -

Providing, fixing, testing and commissioning of self priming sewage / dewatering pump monoblock, three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping sewage from sump to sump / STP, the pumps shall be made of CI casing, CI Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.(The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) Sewage Transfer Pump: Sewage Collection Tank 2 to Sewage Collection Tank 3 Capacity : 5.9 Litres / sec Head : 20 Mtrs Type of Pump : Self Priming Sewage / Dewatering Pump Monoblock Total No. of Pump-2No.(1W+1S)

Quantity1

Rate-

Amount -

Providing, fixing, testing and commissioning of self priming sewage / dewatering pump monoblock, three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping sewage from sump to sump / STP, the pumps shall be made of CI casing, CI Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.(The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) Sewage Transfer Pump: Sewage Collection Tank 3 to STP Capacity : 10.5 Litres / sec Head : 15 Mtrs Type of Pump : Self Priming Sewage / Dewatering Pump Monoblock Total No. of Pump-2No.(1W+1S)

Quantity1

Rate-

Amount -

SH: PRESSURE BOOSTER PUMP SYSTEM Supplying, Installing, Testing & Commissioning at site in position Twin Booster Pack Pump system, vertical multistage pump with indivdual VFD, 100 litres pressure tank for HNS system, suction & delivery manifold, control panel suitable for automatic operation with cascade control facility and level switch etc complete in all respects. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.(The above work shall be carried out by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) Twin Booster Pack System for Cottages Material of Construction : Impeller : SS, Delivery Casing : Cast Iron Capacity : 3.0 Litres / sec Head : 40 Mtrs Pressure Vessel: 100 Litre / Suitable Capacity Total No. of Pump-2No.(1Working + 1 Assist)

Quantity1

Rate-

Amount -

Supplying, Installing, Testing & Commissioning at site in position Twin Booster Pack Pump system, vertical multistage pump with indivdual VFD, 100 litres pressure tank for HNS system, suction & delivery manifold, control panel suitable for automatic operation with cascade control facility and level switch etc complete in all respects. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.(The above work shall be carried out by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) Twin Booster Pack System for Convention Hall Material of Construction : Impeller : SS, Delivery Casing : Cast Iron Capacity : 2.0 Litres / sec Head : 30 Mtrs Pressure Vessel: 100 Litre / Suitable Capacity Total No. of Pump-2No.(1Working + 1 Assist)

Quantity1

Rate-

Amount -

Supplying, Installing, Testing & Commissioning at site in position Single Booster Pack Pump system, horizontal multistage pump without VFD, integral 60 litres tank, suction & delivery manifold, control panel suitable for automatic operation with level switch etc complete in all respects. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Single Booster Pack System for Restaurant Material of Construction : Impeller : SS, Delivery Casing : Cast Iron Head : 30 Mtrs Pressure Vessel: 60 Litre / Suitable Capacity Total No. of Pump-1No.(1Working)

Quantity1

Rate-

Amount -

Supplying, Installing, Testing & Commissioning at site in position Single Booster Pack Pump system, horizontal multistage pump without VFD, integral 60 litres tank, suction & delivery manifold, control panel suitable for automatic operation with level switch etc complete in all respects. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Single Booster Pack System for Sports Complex Material of Construction : Impeller : SS, Delivery Casing : Cast Iron Capacity : 1.2 Litres / sec Head : 30 Mtrs Pressure Vessel: 24 Litre / Suitable Capacity Total No. of Pump-1No.(1Working)

Quantity1

Rate-

Amount -

327 More

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Cochin International Airport Limited Tender

Cochin International Airport Limited - CIAL Tender

Costs

EMD

Document Cost

Tender Fee

Description

Contact

Tender Id

Bid Award Id

Tender No

Tender Authority

Purchaser Address

Website

BOQ Items

Potential Partner

TENDER BY COUNTRIES

United States Tenders|

United Kingdom Tenders|

Spain Tenders|

France Tenders|

Qatar Tenders|

Australia Tenders|

Canada Tenders|

China Tenders|

Malaysia Tenders|

Maldives Tenders|

Singapore Tenders|

Bangladesh Tenders|

Ethiopia Tenders|

Bhutan Tenders|

Kuwait Tenders|

Oman Tenders|

Germany Tenders|

Egypt Tenders|

Ghana Tenders|

Saudi Arabia Tenders

TENDER BY AUTHORITIES

Federal Road Agency Tenders|

Bangladesh Railway Tenders|

Area Metropolitana De Barcelona Tenders|

Jsc Russian Railways Tenders|

Kuwait Oil Company Tenders|

Civil Aviation Authority Tenders|

Food And Agriculture Org. Tenders|

Eskom Tenders|

Energy Regulation Commision Tenders|

Dept Of Defence Tenders

TENDER BY CATEGORIES

Agriculture Or Forestry Works Tenders|

Automobiles And Auto Parts Tenders|

Civil And Construction Tenders|

Consultancy Services Tenders|

Education And Training Services Tenders|

Electrical And Electronics Tenders|

Finance And Insurance Sectors Tenders|

Food Products Tenders|

Furnitures And Fixtures Tenders|

Healthcare And Medicine Tenders

TENDER BY PROCUREMENT

Goods Tenders|

Works Tenders|

Services Tenders

OFG MANUFACTURING BUSINESSES PRIVATE LIMITED

Head Office

Sales Office

COMPANY

About Us

Contact Us

Download Media Kit

POLICIES

Terms of Use

Privacy Policy

SUPPORT

Request Demo

MOBILE APPS