Cochin Devaswom Board Tender

od148783/2023_2024 : Entrance door (Double shutter)-Providing front glazing doors using 12 mm thick toughened glass of approved make with etching pattern on Aluminium powder coated horizontal section of 62.5x37.1x1.5 mm thick at top and twin style section at bottom of JINDAL/INDAL confirming to ISI 303 standard for a height of 210 cm as shown in the drawing .the door is to be mounted on floor spring.<br>The door shall be double shuttered as per the design with necessary fittings and accessories like SS handle 45cm long to each shutter and glass to glass lock ,connector for floor spring,etc.to be provided.

od148784/2023_2024 : COUNTER PARTITION (120cm (H) )<br>The partitions are made of 12mm thick glass to be fixed firmly<br>to the aluminium section of size 50x50x1.2 mm as shown in the<br>drawing for a height of 45 cm above the solid partion<br>The bottom portion of the partition is of double skin type for a<br>height of 75cms. In the frame work verticals and horizontals are<br>made of aluminum section of size 50x50x1.2 mm to a max.<br>distance of 60cm and two verticals at edges with 50x50x1.2 mm<br>aluminium section<br>Frame work is covered with 9 mm thick marine grade plywood<br>(IS 303) on both sides and finished with 1 mm thick laminate of<br>approved colour & pattern on both sides as per the drawing<br>The partition is firmly fixed to the floor. Necessary wicket doors<br>are to be provided as shown in the drawing. Necessary<br>handles,hinges and tower bolts etc. are to be provided for the<br>wicket door. .The edges of the glass to be polished.<br>

od148785/2023_2024 : MODULAR PARTITION (120cm (H) )<br><br>65 to 75mm thick powder coated 1.2mm thick CRCA partitions<br>(Manufactured by Godrej/Metafab/Fether Lite/Methodox/ Victory<br>any approved makes) with pre punched cutouts to run electric &<br>networking cables. Dual Race ways with punch out to fix<br>electrical & data modules for power & data at just below table<br>and skirting level. Partitions are covered with 9 mm tiles both<br>sides prelaminated particle board/Fabric Cladded<br>Board/glass/soft board as required by using sliding panel<br>method. Level adjusters and all the visible edges of partitions<br>are covered with 2mm thick powder coated Aluminium trims &<br>pvc joinery. Necessary wicket door as per the drawing. with all<br>fittings are to be provided<br>

od148786/2023_2024 : Double Skin Solid partition<br><br>The partitions are of double skin type. The partition should be<br>firmly fixed on floor/ counter/ wall made out of aluminium<br>section of 50x50x1.2 mm thick of INDAL/JINDAL as internal<br>frame structure placed horizontally & vertically in 60x60 cm<br>interval as shown in the drawing which is covered with 9 mm<br>thick marine grade plywood(IS 303) on both sides and finished<br>with 1 mm thick laminate on both sides .<br>The partition is to be firmly fixed to the floor and ceiling. The<br>partition up to false celing only be measured.

od148789/2023_2024 : Supplying and fixing wood plastic composite (WPC)fluted louvers panels of thickness 23 mm to 27 mm on interior walls using steel clips.Hazel nut/Oak/Ebony finish as per the direction of Engineer

od148790/2023_2024 : Cupboards<br>The width and height of the cupboard is shown in the drawing.<br>All horizontal and vertical partitions, rear side and cupboard<br>doors are made of 19 mm thick marine plywood finished with 1<br>mm thick laminate of approved colour.<br><br>The front portion of the cupboard is to be provided with<br>openable shutters using 19 mm thick marine plywood finished<br>and all the exposed faces are finished with 1 mm laminate and<br>the inner sides with 0.8 mm thick laminate<br><br>Necessary fittings such as cabinet hinges, Magnetic lock , ball<br>catches, 200 mm long SS finish handles etc should be provided<br>in each shutter. Necessary 2 mm thick PVC edgebanding shall<br>be given in all visible/ exposed edges. Skirting for a height of<br>10cm should be provided as per the drawing.

od209484/2023_2024 : Vertical Blinds<br>Providing and fixing 100 mm wide Vertical Blinds of Vista or any<br>approved equivalent make and approved Colour.

od148791/2023_2024 : Table for EE 180x80x75 cm<br><br>Providing and fixing tables made out of 19mm thick marine<br>plywood of approved make finished with 1 mm thick laminate in<br>all visible areas. The inner sides are with 0.8 mm thick<br>laminate. Ready made keyboard tray made out of powder<br>coated MS sheet mounted under the worktop with telescopic<br>sliding channels. A country wood foot rest of size 7.5x2.5cm is<br>also provided. 12mm thick glass is to be provided on table top<br>and the edges of glass to be polished.Provision for cable<br>manager is to be provided.<br><br>Drawers are made of 16mm thick marine plywood and exposed<br>faces are finished with 1 mm thick laminate and inner sides with<br>0.8 mm thick laminate as shown in the drawing. Necessary<br>fittings such as steel slides, godrej lock , handles etc. of<br>approved make are to be provided. One Drawer set contains<br>three numbers are to be provided. Necessary grooves in<br>laminate are to be provided as shown in drawings. All the<br>visible/exposed edges shall be provided with 2 mm thick PVC<br>edgebanding.<br>

od148792/2023_2024 : Table for AE,Supt. 150x80x75 cm<br><br>Providing and fixing tables made out of 19mm thick marine<br>plywood of approved make finished with 1 mm thick laminate in<br>all visible areas. The inner sides are with 0.8 mm thick<br>laminate. Ready made keyboard tray made out of powder<br>coated MS sheet mounted under the worktop with telescopic<br>sliding channels. A country wood foot rest of size 7.5x2.5cm is<br>also provided. 12mm thick glass is to be provided on table top<br>and the edges of glass to be polished.Provision for cable<br>manager is to be provided.<br><br>Drawers are made of 16mm thick marine plywood and exposed<br>faces are finished with 1 mm thick laminate and inner sides with<br>0.8 mm thick laminate as shown in the drawing. Necessary<br>fittings such as steel slides, godrej lock , handles etc. of<br>approved make are to be provided. One Drawer set contains<br>three numbers are to be provided. Necessary grooves in<br>laminate are to be provided as shown in drawings. All the<br>visible/exposed edges shall be provided with 2 mm thick PVC<br>edgebanding.<br>

od148793/2023_2024 : Side Table 100x45x72.5 cm<br><br>Providing and fixing side tables made out of 19 mm thick<br>marine plywood of approved make finished with 1 mm thick<br>laminate in all visible areas as shown in the drawing. File rack<br>with sliding sh tt u ers sh ll a be made of 19 mm thi kc marine<br>plywood finshed with 1 mm thick laminate by using Aluminium<br>sliding channel, sliding cabnet shutter fittings (Ebco/Equivalent),<br>lock and key, 5cm SS handle. CPU stand is provided in the side<br>table.The inner sides are with 0.8 mm thick laminate. 12mm<br>thick glass is to be provided on table top and the edges of glass<br>to be polished. All the visible/exposed edges shall be provided<br>Size - 100x45x72.5cm

od148794/2023_2024 : Modular Table 150x140x75 cm<br>Supplying and fixing table made out of 25mm thick interior grade both side prelaminated particle board with exposed top edges lipped with 2mm thick PVC edgeband applied with hot melt glue and other edges with 0.5mm thick PVC edge band all round panel and gromet is provided for wire management.Modesty panel,hardwares like minifix powder coated clipboard screws,PVC right angle block,level adjustes etc.Foot rest are made of 18mm prelaminate particle board with 0.5mm thick PVC edge band knok down type bottom bush etc.30cm width and 15cm height at one end and the other end is zero 50cm length fixed on the bottom side of the table etc.complete.

od148797/2023_2024 : Key board Trays:Supplying and installing Keyboard Tray made out of powder coated MS sheet exposed edges lipped with PVC edge band 0.5mm thick mounted under the worktop with telescopic sliding channels.Ebco or other approved.

od148798/2023_2024 : Drawer unit:Supplying and fixing Drawer unit made out of 19mm thick marine plywood edgebanded with 1mm laminate.4 drawer pullouts mounted on sliders,with exposed edges lipped with PVC edge band 0.5mm thick central locking system for drawer pullouts(Ebco/Doorset/Hettich/Ozone),with bottom bush with necessary shutters to be provided.

Dismantling and construction

15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

10.6.3 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover

10.7 : Providing and fixing ball bearing for rolling shutters.

17.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brass pillar taps

17.10.2.3 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board470x420 mm bowl depth 178 mm

50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2

50.18.8.4.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2

50.18.8.7.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2

11.49.2 : Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tiles 600x600 mm

11.50 : Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles

11.48.2 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

od208385/2023_2024 : False ceiling(plain Gypsum Board)-Providing and fixing suspended false ceiling,which includes providing and fixing G.I perimeter channels of size 27mm,0.5mm thick having one flange of 20mm and another flange of 30mm along with perimeter of ceiling,screw fixed to brick wall/partition with the help of nylon rawl plugs and screws.<br>Then suspending G.I intermediate channels of size 45mm,0.9mm thick with two flanges of 15mm each from the soffit at 1200mm centres in one direction and 600mm in other with ceiling angle of width 25x25x0.5mm thick fixed to soffit with G.I cleat &steel expansion fastners.<br>Ceiling section of 0.5mm thickness having knurled wedge of 51.5mm and flanges of 26mm each with lips of 10.5mm are then fixed to intermediate channel with the help of connecting clips and the direction perpendicular to the intermediate channel at 600mm centres.12.5mm tappered edge Moisture resistant gipboard is then screw fixed to ceiling sections with 25mm dry wall screw at 230mm centres.<br>Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment.Finally the tapered and square edges of the boards are joined and finished to a flush with requisite jointing compound,tapes and finished with 2 coat putty and 2 coats of plastic emulsion paint with rolle brush of approved colour to match the interior over the approved primer.<br>Necessary steppings and cuttings for electrical fittings,security devices,fire fighting equipments etc.as per the directions at site and arrangements for fixing the electrical and other fittings are to be provided.(Refer ceiling paln)<br>

12.26.1 : Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) :6 mm thick cement board

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

11.37A : Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

13.98.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work