Bharat Sanchar Nigam Limited Tender

3 x 1.5 sq. mm

4 x 1.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm

25 mm

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required.

Supplying and fixing 5 Amps to 32 Amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps

Dismantling light fittings, ceiling fans, exhaust fans etc, along with its mounting arrangements and accessories and shifting the same to an ideal location in the building premises in consultation with the exchange in charge etc as reqd.

Dismantling the following materials in First floor (Approx Area : 8608 Sqft) of TE building fixed on wall / ceiling along with wires, conduits, casing and capping, bare copper and shifting the material to an ideal location in the exchange premises in consultation with the exchange in charge etc as reqd. a) Plug points and Electrical wiring in PVC/MS conduits and casing capping - 180M (approx) b) 4kVA voltage stabilizer - 03 Nos (approx) c) AC timer cubicle panel ( Size : 1200mm x1200mm x 250mm ) - 1No d) Armoured UG cable of size upto 70Sqmm laid on trays & cable trench(Approx length: 160M) e) 25mmx 5mm GI strip on tray : (Approx length : 25M) f) 25x25x5mm MS angle tray of width upto 400mm - Approx length - 36M g) 150mm x 150mmx 50mm perforated cable tray - Approx length - 30M h) Fire detection Panel (2 Nos) i) Detectors with base box, Hooters, MCPs etc (Aprox 35 Nos) j) Fire Alarm Cable (Aprox 200 Mtrs) Complete as above

Dismantling the following sizes of GI ducts , plenum ,return air boxing etc along with supports and shifting the same to an ideal location in exchange premises in consultation with the exchange in charge also i/c making good the damages etc as reqd. a) Plenum - 80 cm (W) x 120cm (H) x 400 CM (L) - 1No b ) GI duct width upto 90 cm and Height upto 50 cm - 40 M c) Return air boxing of approx size 2.3M(W) x 1.5M (H) X 10 M (L) d) 40mm GI drain pipe - Approximate length - 20M

Dismantling 1.5TR split AC unit along with condenser stand, refrigerant pipes, drain pipes etc after disconnecting the electrical supply / pumping down the gas if necessary etc as required without damaging the unit and shifting the same to an ideal location in the exchange builing in conusltation with the exchange in charge etc as reqd.

Supplying ,installation , testing and commissioning of 20W , 4 feet LED batten tube , complete with all accessories etc. directly on ceiling / wall / existing light fixture, including connections with 1.5 sq.mm FRLS PVC insulated , copper conductor , single core cable earthing etc. as required ( M/s Philips, Wipro , Havells or S.S make)

S/f LED type street light fitting on 25 mm size 1.2m long medium class GI pipe bend to suitable shape on wall i/c brackets,fixtures, connections with 1.5 Sqmm copper conductor unarmoured cable from control box etc as reqd (M/s Crompton Greaves make , Model No: LSTS 25 CDL or SS make)

S/f LED type POST TOP street light fitting on 60 mm size medium class GI pipe of suitable length on gate pillar i/c fixtures, connections with 1.5 Sqmm copper conductor unarmoured cable from control box etc as reqd (M/s Crompton Greaves make , Model No: LSTP 40 CDL M or SS make)

S/F of SMC type loop in and loop out box / control box of size 140 x 140 x 95mm, i/c pdg SP MCB of 6A rating B series, cable terminals, earthing stud, connection complete as reqd.

Checking the continuity and insulation value of aluminum armoured UG cable of size upto 25 Sqmm used for following compound light system. a)No.of street light poles - 10 Nos b)On building - 2Nos c ) On gate - 2Nos Complete as above - 1 Job

Supply and fixing 9W LED bulb in the existing batten holder etc as reqd. ( Make : Philips or S.S)

Supply and fixing 3mm thick phenolic laminated sheet to seal the openings , MS boxes , replace broken switch board cover etc as reqd