Bharat Sanchar Nigam Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Bharat Sanchar Nigam Limited - BSNL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Jun 2024
Closing Date26 Jun 2024
Tender Amount₹ 1,21,77,253
Costs
EMD
₹ 2,43,545Document Cost
₹ 1,180Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BSNL_199104_1Bid Award Id
ViewTender No
07/EET/BSNL/TVM/2024-25Tender Authority
Bharat Sanchar Nigam Limited ViewPurchaser Address
-Website
http://https://www.bsnl.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
a)All types of soil i)300 mm dia
60
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well,
unplasticized PVC medium well casing pipe of required dia, conforming
to IS: 12818, including required hire and labour charges, fittings & accessories
etc. all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
... More
160mm dia pipe
150
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well,
unplasticized PVC medium well casing pipe of required dia, conforming
to IS: 12818, including required hire and labour charges, fittings & accessories
etc. all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
... More
140mm dia pipe
150
-
-
... More
EI & Fans-SH I- Point wiring, circuit wiring
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
Group C
74
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
4
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
53
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
6
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amps switch
266
-
-
... More
3 pin 5/6 amp socket outlet
266
-
-
... More
Telephone socket outlet
104
-
-
... More
CAT 6 RJ 45 computer jack
134
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
3 Module (100mmX75mm)
40
-
-
... More
4 Module (125mmX75mm)
10
-
-
... More
6 Module (200mmX75mm)
30
-
-
... More
12 Module (200mmX150mm)
7
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
250
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
120
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
80
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
2 x 1.5 sq. mm
100
-
-
... More
4 x 1.5 sq. mm
10
-
-
... More
6 x 1.5 sq. mm
125
-
-
... More
4 x 6 sq. mm
385
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
250
-
-
... More
25 mm
250
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in existing/recessed steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
2000
-
-
... More
2 run of cable
100
-
-
... More
3 run of cable
30
-
-
... More
Supplying and drawing following pair 0.5 sq mm FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
2 Pair
1850
-
-
... More
4 Pair
150
-
-
... More
Suppying and fixing 3 mm nominal thick phenolic laminated sheet as reqd.
4
-
-
... More
(Make- MK-Blenze /Legrand-Myrius /Crabtree-Athena or Similar Superior make).
-
-
-
... More
SH II- SITC of fittings and Fans
-
-
-
... More
Note
-
-
-
... More
1) All light fittings and fans shall be got approved by BSNL / C DIT before supply at site.
-
-
-
... More
2) All the light fittings should have the following features
-
-
-
... More
a) THD shall be less than 10%
-
-
-
... More
b) PF should be 0.9 or better
-
-
-
... More
c) ROHS complaince
-
-
-
... More
d) LED lamps should have a luminous efficacy of 100 lumens / Watt or better
-
-
-
... More
e) UGR should be 19 or less
-
-
-
... More
f) For indoor lights CRI shall be greater than 80 and that of Outdoor lights greater than 70.
-
-
-
... More
g) All indoor luminaries should have passed "Photo Biological Safety Standards Test"
-
-
-
... More
3) IES files of all the luminaries shall be submitted
-
-
-
... More
4) Corelated Colour temperature (CCT) mentioned against each fittings are indicative only and the exact CCT of each fitting shall be finalised before supply in consultation with BSNL Authorities according to the application)
-
-
-
... More
Supplying, Installing, testing and commissioning of following recess mounting type LED fitting including lamp with all accessories in the false ceiling/ without false ceiling area including supplying and fixing 2 Nos chain arrangement / Clip etc and connection with 1.5 sq. mm FR PVC insulated copper conductor, single core cable and earthing including flexible PVC conduit etc as required.
-
-
-
... More
LED recess mounted type luminaire 2'x2' size up to 30 W (max), with necessary frame, suitable for delivering 3000 lumens (min) output , CCT 5700K (Wipro Immaculate, Philips, Crompton, or similar superior make)
20
-
-
... More
Hanging type linear 4 ft LED luminaire up to 30 W (max), suitable for delivering 3000 lumens (min) output , CCT 5700K including suspension arrangement(Wipro LM 34 Axeon+G2L, Philips, Crompton, or similar superior make)
72
-
-
... More
LED recess mounted type Down lighter (Round) upto 18 W (max)suitable for delivering 1800 lumens (min) output. CCT 4000-4500K. (Make : Wipro LD06 Mollis, Philips, Crompton, or similar superior make)
10
-
-
... More
LED recess mounted type Down lighter (Round) upto 9 W (max)suitable for delivering 900 lumens (min) output. CCT 4000-4500K. (Make : Make : Wipro LD06 Mollis,Philips , Crompton or similar superior make)
6
-
-
... More
Supplying, Installation, testing and commissioning of pre-wired, following LED fitting including lamp/driver etc, complete with all accessories etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
-
-
-
... More
LED Bulk head type luminare up to 10 W (max) suitable for delivering 1000 lumens (min) output. CCT5700K, with clear/ opal diffuser (Make : Wipro LW07 , PHILIPS , Crompton, Wipro or similar superior make)
18
-
-
... More
Surface/suspended type LED batten fitting suitable for 1 x 20W, 4 ft TLED lamps ( Make : Wipro Optima LL24, Philips Crompton , Bajaj or similar superior make)
36
-
-
... More
Surface mounting type Square/ round LED Integrated Down Lighter with maximum power input of 9 W and with Lumens output not less than 900 Lumens, 4000-4500 K (Wipro Mollis Surface LD06, Philips or Similar)
36
-
-
... More
Surface mounting type Square/round LED Integrated Down Lighter with maximum power input of 6 W and with Lumens output not less than 600 Lumens, 4000-4500 K (Wipro Mollis Surface LD06, Philips or Similar)
16
-
-
... More
SITC of 25 W LED street light lantern with 2800 Lumin Output, with black powder coated aluminium pressure die cast alloy body, high purity PC fresnel diffuser, toughened glass cover with IP 66 protection mounted on 50 mm diameter B class GI pipe of approx 1.2 Mtr length shall be welded on a base plate 150x 150 x 6 mm plate with 8 x 70 mm anchor bolt provision at the boundary RCC wall with suitable slope at a height of 6 mtrs. All the metal parts shall be finished with two coats of zinc chromate primer for pole and bracket and two coats of paint on pole and bracket of approved colour, sign writing, etc, as required. (Make: Fittings - Philips, Wipro sky line LED LR02-291-XXX-57-XX, Bajaj or similar make; Pipe TATA, JINDAL, or similar superior make)
8
-
-
... More
Supplying and fixing of 25 W post top lantern with spherical poly carbonate diffuser, powder coated die cast aluminium body and fixing the same on the parapet/ Gate piller etc as required ((Make: Fittings - Philips, Bajaj BLPTSP 25W LED, Havells Crompton etc; 0.3 Mtr 75 mm dia B calss GI Pipe TATA, JINDAL, or similar superior make)
4
-
-
... More
Supply and fixing of weatherproof box made of SMC enclosure of Appro: size 160 X 160 X 60 mm with locking arrangement on the existing lamp post/wall including supplying and fixing 1 No 6 A DP MCB 10 KA rating and P&N porcelain/ backlite connector with necessary fixing arrangements in the SMC box, etc as required. The metal fixing arrangements inside the SMC box/ the lamp post should be properly earthed. (SMC box make: M/s Sintex or SS)
12
-
-
... More
Supplying ,Installation, testing and commissioning of 1200 mm ceiling fans with BLDC TECHNOLOGY for energy efficiency, including wiring the down rods of standard length (upto 30cm) with 1.5sq mm FR PVC insulated, copper conductor single core cable etc as required.( without Regulator) (Make- CG/Bajaj/Usha/HAVELLS/Atomberg or S S approved make)
46
-
-
... More
Supplying ,Installation, testing and commissioning of 600mm ceiling fans , including wiring the down rods of standard length (upto 30cm) with 1.5sq mm FR PVC insulated, copper conductor single core cable etc as required.( without Regulator) (Make- CG/Bajaj/Usha or S S approved make)
8
-
-
... More
Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
378
-
-
... More
Supplying ,Installation, testing and commissioning of 600mm ceiling fans , including wiring the down rods of standard length (upto 30cm) with 1.5sq mm FR PVC insulated, copper conductor single core cable etc as required.( without Regulator) (Make- CG/Bajaj/Usha or S S approved make)
8
-
-
... More
Supplying and fixing 2 module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
54
-
-
... More
Supply, Installation, testing and comissioning of residential type light duty exhaust fan 900-1350 rpm, 250 mm, in plastic housing light duty in the existing opening, including louver shutter, making the hole to suit the size of the above fan, making good the damage, connection, testing commissioning etc as required (M/s Crompton/Almonard or similar superior make)
10
-
-
... More
SITC of single sided 3W Green LED Exit signage with "Man Running Right / Left" sign with arrow of standard/ suitable size with LED lamp, with 2 Hrs battery backup, i/c battery, charger, accessories and giving connections etc as required.
16
-
-
... More
Supplying , Installing , Testing and commissioning of high performance programmable occupancy sensor (with light sensing), 230 V AC, of folowing type with PIR technology and zero current switching, to control 6 A lighting load including all accessories etc as reqd.( Make -Legrand MK/Wipro/Philips/Cape-Theben or SS approved make)
-
-
-
... More
Motion detectors suitable for parking areas with 360 degree detection angle and detection area of not less than 16Mtrs (mounting Height 2-4 Mtr)
2
-
-
... More
Motion detectors suitable for toilets ceiling mounted with 360 degree detection angle and detection area of not less than circular 8 M dia (mounting Height 2-4 Mtr)
9
-
-
... More
Presence detectors suitable for lobby with 360 degree detection angle and detection area of not less than circular 24 M dia (mounting Height 2-10 Mtr)
5
-
-
... More
(Note: PIR, Microwave & Ultrasonic sensors shall be sample tested at site before installation for features like time delay ,lux level etc.and shall be got approved by the Engineer in Charge.)
-
-
-
... More
SH III- DBs and MCBs
-
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
4 way (4 + 12), Double door
1
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
4 way (4 + 12), Double door
1
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
216
-
-
... More
Double pole
2
-
-
... More
Triple pole
2
-
-
... More
Supplying and fixing Following rating 415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Four Pole 40 A
2
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
25 amps
2
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps
2
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
10
-
-
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 4 way, Double door TPN MCBDB
2
-
-
... More
Supplying and fixing Cable End Box (Loose wire box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
2
-
-
... More
SH- IV UPS
-
-
-
... More
Supply installation testing and commissioning of True On line 1+1, parallel redundent UPS of following capacity suitable for 415 V 50 Hz AC 3 phase Input and 3 phase & Neutral AC output having a backup of 15 Minutes (minimum at full load condition) withLead acid/Tubular battery , battery stand and connecting wires. (M/s Vertiv, Aplab, Hitachi-Hirel, APC or similar superior make). including 12 Months comprehensive warranty for UPS and Batteries at site complete as reqd as per following specification.
1
-
-
... More
Out put rating- 2 x 30 kVA
-
-
-
... More
Type- Parallel redundent with static by- pass arrangement.
-
-
-
... More
Input-Three phase, 415 Volts +/- 10% , 0.8 lag
-
-
-
... More
Out put- 3 Phase - Neutral 415Volts +/- 1 %.control. Load PF range 0.7(lag) to 0.9 (lead)
-
-
-
... More
UPS output THDi (current) shall not be more than 5% at Full load.
-
-
-
... More
Battery- 12 Volt, SMF type. (2 sets- 1 set for each UPS),Minimum Guaranteed VAH:-1600 X Per KVA X Per hour of backup time
-
-
-
... More
Input /output MCCB's for each modules, Battery and static BY-PASS unit
-
-
-
... More
The first power up unit will serve as master and the second unit will follow the running unit with equal sharing of the battery charging and load in synchronisation with the By-pass source.
-
-
-
... More
When input source to both units and by-pass were intrrupted, both units will meet the load from battery till the battery drained to the low battery set voltage.
-
-
-
... More
During any fault in one unit, the same will be isolated from the line at input /output /battery side and full load will be met by the running unit.
-
-
-
... More
When fault with both the units, they are isolated from both sides and from battery and the load will be transferred (time 20 ms) to by-pass without any intrruption to load.
-
-
-
... More
Both the units and static bypass unit shall have separate indication panels to read relevant parameters.
-
-
-
... More
Three phase out put distribution MCB's 8 Nos of 25 Amps shall be included in the panel board. If the same is supplied with separate unit, common isolation, inter panel cabling etc. as per standards shall be in the scope of the supplier.
-
-
-
... More
SH- V Cabling
-
-
-
... More
Supplying, laying and fixing of one number PVC insulated and PVC sheathed/ XLPE Al power cable of 1.1KV grade of 31/2 C 70 sq.mm in following ways including all necessary accessories as required.
-
-
-
... More
on wall surface (clamped with 25 x 3 flat)
5
-
-
... More
Supplying, laying and fixing of one number PVC insulated and PVC sheathed/ XLPE Al power cable of 1.1KV grade of 31/2 C 50 sq.mm in following ways including all necessary accessories as required.
-
-
-
... More
on wall surface (clamped with 25 x 3 flat)
10
-
-
... More
Supplying, laying and fixing of one number PVC insulated and PVC sheathed/ XLPE Al power cable of 1.1KV grade of 4 C 25 sq.mm in following ways including all necessary accessaries as required.
-
-
-
... More
on wall surface (clamped with 1mm thick saddle)
50
-
-
... More
Supplying, laying and fixing of one number PVC insulated and PVC sheathed/ XLPE Copper control cable of 1.1KV grade of 3 C 1.5 sq.mm in following ways including all necessary accessories as required.
-
-
-
... More
on wall surface (clamped with 1mm thick saddle)
5
-
-
... More
Supplying, laying and fixing of one number PVC insulated and PVC sheathed/ XLPE Copper control cable of 1.1KV grade of 5 C 1.5 sq.mm in following ways including all necessary accessories as required.
-
-
-
... More
on wall surface (clamped with 1mm thick saddle)
5
-
-
... More
Supplying, laying and fixing of one number PVC insulated and PVC sheathed/XLPE, Armoured, Copper power cable of 1.1KV grade of 4 C 6 sq.mm in following ways including all necessary accessaries as required.
-
-
-
... More
on wall surface (clamped with 1mm thick saddle)
10
-
-
... More
Supplying, laying and fixing of one number PVC insulated and PVC sheathed/XLPE, Armoured, Copper power cable of 1.1KV grade of 4 C 10 sq.mm in following ways including all necessary accessaries as required.
-
-
-
... More
on wall surface (clamped with 1mm thick saddle)
20
-
-
... More
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
50
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
4 X 25 sq. mm (28mm)
1
-
-
... More
3½ X 50 sq. mm (35mm)
1
-
-
... More
3½ X 70 sq. mm (38mm)
1
-
-
... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required.
-
-
-
... More
5 x 1.5 Sqmm
10
-
-
... More
4 x 10 Sqmm
10
-
-
... More
4 x 6 Sqmm
10
-
-
... More
3 x 1.5 Sqmm
10
-
-
... More
SH- VI Submersible Pump & Fittings
-
-
-
... More
SITC of Horizontal open well submersible pump with 3 HP Three phase induction motor , capable of delivering not less than 213 LPM at a head of 30 Mtrs, in the underground sump including pump starter and with existing electronic level controller etc as required.(Drinking water). The make and model of the pump shall be got approved by the Engineer - in - Charge before installation)
1
-
-
... More
SITC of Horizontal open well submersible pump 3 HP with three phase induction motor, capable of delivering not less than 525 LPM at a head of 21 Mtrs,in the underground sump including pump starter and with existing electronic level controller etc as required. Rain Harvesting to Fire/Flush Terrace. (The make and model of the pump shall be got approved by the Engineer - in - Charge before installation)
1
-
-
... More
SITC of sewage over flow water handling Open well submersible pump set 1 HP with single phase induction motor , capable of delivering not less than 200 LPM at a head of 8 Mtrs, in the existing underground sewage overflow sump etc as required. Sewage over flow sump to corporation collection PVC tank). (The make and model of the pump shall be got approved by the Engineer - in - Charge before installation)
1
-
-
... More
Supplying and laying of 25 mm B class GI pipe with all accessories like coupling, long bend etc along the ground, in the under ground sump, along the surface of wall on the vertical , horizontal run etc i/c clamping (in case of surface laying at regular intervals) as reqd
22
-
-
... More
Supplying and laying of 50 mm B class GI pipe with all accessories like coupling, bend, elbow etc along the ground, in the under ground sump, along the surface of wall on the vertical , horizontal run etc i/c clamping at regular intervalls
22
-
-
... More
Supplying and fixing of ISI mark Bronze Gate Valve Hex type 25 mm size suitable for 10 Kg / Cm2 pressure with screwed female ends
1
-
-
... More
Supplying and fixing of ISI mark Bronze Gate Valve Hex type 50 mm size suitable for 10 Kg / Cm2 pressure with screwed female ends
1
-
-
... More
Supplying and fixing of ISI mark Bronze Non Return Valve 25mm size (Horizontal flow) Screwed suitable for 10 Kg / cm2 pressure
1
-
-
... More
Supplying and fixing of ISI mark Bronze Non Return Valve 50 mm size (Horizontal flow) Screwed suitable for 10 Kg / cm2 pressure
1
-
-
... More
Supplying and fixing of stand for the open well submerssible pumps for mounting the pump in the existing sump fabricated out of 65mm x 65mm x 6 mm GI angle (approx 4 Mtr angle required for the stand) i/c cutting welding drilling etc as required.
3
-
-
... More
Supplying and laying of 3 core x 4 Sqmm flat cable with copper conductor and PVC sheath and PVC insulation confirming to IS 694: 1990 suitable for submerssible motors upto 1.1 KV grade, i/c connections tieing the cable along with the delivery pipes in the sump, laying through the existing metal pipes etc as required
34
-
-
... More
SITC of electronic water level controller for 230 volts, 2.0 HP motor including float switch, flow swith etc. complete. Only low voltage operating type float switch and flow switch shall be used. Make kirloskar or V guard or SS make.
3
-
-
... More
Supply and laying of marine quality minimum 12 mm nylon rope or supporting , drawing in and out the open well pump from the sump/ open well etc complete as required.
30
-
-
... More
SH- VII Lightning Protection
-
-
-
... More
Supplying and fixing of Aluminium angled Air trmination rods, having 10 mm dia and 1.0 Mtr total length capable to withstand gust wind speed of upto 224 KM/h in the existing solar PV System panels. Including making holes etc as required (DEHN 101110 or similar superior make)
6
-
-
... More
Providing and fixing of Tubular air-termination rod made of aluminium / aluminium alloy / SS, having total length of 2.0 Mtr with a minimum wall thickness of 2.5 mm, on the terrace as reqd.
1
-
-
... More
Providing and fixing of Tubular air-termination rod made of aluminium / aluminium alloy / SS, having total length of 1.5 Mtr with a minimum wall thickness of 2.5 mm, on the terrace as reqd.
4
-
-
... More
Providing and fixing 50 Sqmm bare Aluminium round conductor in the horizontal as well as vertical runs for lightning conductor including providing and fixing of insulated lightning conductor holders at every meter span etc as required. (DEHN, OBO, Cape or similar superior make)
120
-
-
... More
Supplying and fixing connectors made of SS 304 for cross connection / T cconnection / parellel connections suitable for 8 mm dia solid round Aluminium conductor as required. (DEHN, OBO, Cape or similar superior make)
18
-
-
... More
Supplying and fixing of SS 304 test joint suitable for connecting 8mm Dia round Aluminium solid conductor on one side and 10mm dia copper bonded solid steel round conductor with 100 microns of copper bonding on the other side confirming to IS 62305 i/c providing outdoor polycarbonate / FRP enclosure for housing the test joint having minimum inner dimension of 75mm x 75 mm x 50 mm. (DEHN, OBO, Cape or similar superior make)
2
-
-
... More
Supplying and laying 10mm dia copper coated steel solid round conductor having atleast 70 microns copper, confirming to IS 62305,in heavy duty 20 mm dia PVC pipe with necessary mounting arrangements for interconnections between Test joint and Ring earth etc as required.
24
-
-
... More
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
22
-
-
... More
SH- VIII Panel
-
-
-
... More
LT Metering Panel
-
-
-
... More
Supply, installation, testing and commissioning of wall mounting type LT energy metering panel suitable for CT operated , 3 phase, 4 wire, 50Hz, AC supply system fabricated compartmentalized design fabricated with 2mm thick CRCA sheet i/c powder coating in approved shade having 4 numbers of 200/5 amps CL. 0.5S ,10 VA ring type current transformers fixed on DIN rails and provision for fixing of 3 phase 4 wire Energy meters (Energy meter shall be provided by KSEBL) in separate cubicles with provision for locking and sealing by the KSEB . The panel shall have space to accomodate cutouts and SDF units as detailed below with necessary transparent window, entire panel shall have a common copper earth bar of size 20 mm x 3 mm at the rear with 2 nos earth stud, interconnerction with suitable size PVC insulated copper conductor FRLS cable and control wiring with 1.5 sq.mm PVC insulated copper conductor FRLS cable, cable alleys, cable gland plates, i/c providing following switch gears .
-
-
-
... More
Cubicle Compartmentalised including 3 nos. 160 A fuse cut out, neutral link, 1 No 250 A TPN SDF unit with 160 A HRC Fuse unit, with extended rotary handle , spreaders terminals etc .
-
-
-
... More
Complete as above having locking and sealing arrangements as required by KSEBL and two nos of 3.5 x 185 sq. mm AYFY cable glanding and termination provision. Note: The panel drawing shall be got approved from the Engineer in charge before fabrication and confirming to Kerala SEI guidelines
1
-
-
... More
Main switch board panel
-
-
-
... More
Supply , installation , testing , Main switch board Panel with following specification. Panel made from 2mm Powder coated CRCA sheet , free standing , compartment type, front hinged with cable termination compartment , for indoor use , cubicle type ,with removable bottom / top gland plates for incoming and outgoing connections , dust and vermin proof with TPN Alluminium bus bar , copper earth busbar, complete with internal wiring , ferrules name plates , Powder coated, with gaskets and thumb screw for doors, rotary handle, spreaders and terminals for incoming /out going feeder switches and following accessories .
-
-
-
... More
Note: The panel drawing shall be got approved from the Engineer in charge before fabrication and confirming to Kerala SEI guidelines
-
-
-
... More
(a) Incoming:
-
-
-
... More
(i) 250 A TPN SDF with HRC fuses ,rotary handle & spreaders terminals etc-1 No.
-
-
-
... More
(b) Out goings
-
-
-
... More
(i) 200 A TPN SDF with HRC fuses ,rotary handle & spreaders terminals etc -1 No.
-
-
-
... More
(ii) 160A TPN SDF unit with HRC fuses ,rotary handle & spreaders terminals etc -1 No as spare
-
-
-
... More
(iii) 100A TPN SDF unit with HRC fuses ,rotary handle & spreaders terminals etc -1 Nos
-
-
-
... More
(iv) 63A TPN SDF feeder unit with HRC fuses ,rotary handle & spreaders terminals etc -1 Nos
-
-
-
... More
(c) Bus Bar
-
-
-
... More
(i) TP& N aluminium bus bars of minimum of 400A ( Ph) /200 A (N) capacity with heat shrinkable colour coded sleeves and i/c DMC / SMC bus bar supports at required intervals.(Minimum Busbar size 25mm x 6mm thick)
-
-
-
... More
(d) Indications
-
-
-
... More
(i) LED type indicators for R Y B with fuse protection and toggle switches.-1 set
-
-
-
... More
Complete as above
1
-
-
... More
Fire Panel
-
-
-
... More
Fabrication, supply, installation testing & commissioning of Electrical control panel of cubicle construction, floor mountined type fabricated out of 2mm thick CRCA sheet compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable mountings and internal wiring, earth terminals, numbering etc complete in all respect, suitable for main fire pump, pressurisation pump 7 diesel pump set complete as per Fire and rescue department specification with following in coming and out goings suitable for operation on 415v, 3 phase 50 hz Ac supply with enclosure protection class IP 42 as required.
-
-
-
... More
a) Incoming
-
-
-
... More
(i)315 A TPN SD with rotary handle spreaders & terminals etc -1 No.
-
-
-
... More
(ii) RYB LED indication lamps with 0-500 V Voltmeter with sclector switch
-
-
-
... More
(iii) CT 300/5, ammeter selector and Ammeter 0-300 Amps
-
-
-
... More
b) out going
-
-
-
... More
(i) 50 HP motor starter with 160A TPN Switch Disconnecter unit with shorting link, 70 Amps power contactor ,400/110 V control transformer connected with electronic soft starter unit to suit the load charactoristics having Auto/ manual selection, Local/ Remote start /Stop stayput with lockable at local control station, LED indication, Motor ready to start, Equipment sclect Auto, Equipment select Manual with necessary control wiring included starter panel, MCT with sclector and ammeter-0-100 Amps, etc. complete with spreader terminal ,rotory handle etc -1 No (Soft starter- Schnider Ultistart-22-045 / Kirlosker TG600 045 or similar BSNL approved make )
-
-
-
... More
(ii) 10 HP motor feeder with 63A TPN SDF unit with shorting link , 50 Amps power contactor ,400/ 110 V control transformer connected with Electronic soft starter unit to suit the load charactoristics having Auto/ manual , Local/ Remote switches with local push button station with start/ lockable stayput stop buttions, LED indication lamps Motor ready to start, Equipment sclect Auto, Equipment sclect manual, with necessary control wiring included in the panel, MCT with sclector switch &Ammeter 0-15Amps complete with spreader terminal ,rotory handle etc -2 Nos.( Soft starter Schnider Ultistart 01; Kirlosker TG 600-7P5 or similar BSNL approved make)
-
-
-
... More
(iii)Engine control panel
-
-
-
... More
32 Amps TPN SD with the following.
-
-
-
... More
(i) Auto/Manual selector switch & 3 attempt starting device using Siemens Micro PLC (8 input /4 output) as required, push buttons, start/stop in manual mode.
-
-
-
... More
(ii) Indicating lamp for High/Low lub. Oil pressure, High water temperature and Engine ON indication.
-
-
-
... More
(iii)Battery charger - Siemens SITOP 12 Amps DC power supply 23-28 volt DC adjustible with short circuit protection suitable for 24V battery trickle charging .
-
-
-
... More
(iv) All standard relays and acessories for automatic operation of diesel engine including DC starting contactor.
-
-
-
... More
(v)All inter connecting cables and accessories required for emergency stop of terrace pump lock out and other functions as per the specifications.
-
-
-
... More
Complete as above
1
-
-
... More
Common service switch Board (CSSB)
-
-
-
... More
Supply , installation , testing , Main switch board Panel with following specification. Panel made from 2mm thick Powder coated CRCA sheet , free standing , compartment type, front hinged with cable termination compartment , for indoor use , cubicle type ,with removable bottom / top gland plates for incoming and outgoing connections , dust and vermin proof with TPN Alluminium bus bar , copper earth busbar, complete with internal wiring , ferrules name plates , Powder coated, with gaskets and thump screw for doors, rotary handle, spreaders and terminals for incoming /out going feeder switches and following accessories .
-
-
-
... More
(a) Incoming:
-
-
-
... More
(i) 100 A TPN SDF with 100A HRC fuses ,rotary handle & spreaders terminals etc -1 No.
-
-
-
... More
(b) Out goings
-
-
-
... More
(i) 63A TPN SDF unit with 40A HRC fuses ,rotary handle & spreaders terminals etc -8 Nos
-
-
-
... More
(ii) 63A TPN SDF unit with 50A HRC fuses ,rotary handle & spreaders terminals etc -1 No
-
-
-
... More
(c) Bus Bar
-
-
-
... More
(i) TP& N aluminium bus bars of minimum of 125 A capacity with heat shrinkable colour coded sleeves and i/c DMC / SMC bus bar supports at required intervals.(Current density in the bus shall not exceed 0.8 A / mm2)(Minimum Busbar size 25mm x 6mm thick)
-
-
-
... More
(d) Metering
-
-
-
... More
CT operated Multi function Energy meter- 1 No
-
-
-
... More
(e) Indications
-
-
-
... More
(i) LED type indicators for R Y B with fuse protection and toggle switches.-1 set
-
-
-
... More
Complete as above
1
-
-
... More
LIFT PANEL
-
-
-
... More
Supply , installation , testing , Lift Panel with following specification. Panel made from 2mm thick CRCA Powder coated CRCA sheet ,wall mounting, front hinged with cable termination provision , for indoor use , cubicle type ,with removable bottom / top gland plates for incoming and outgoing connections , dust and vermin proof with TPN Alluminium bus bar , copper earth busbar, complete with internal wiring , ferrules name plates , Powder coated, with gaskets and thump screw for doors, rotary handle, spreaders and terminals for incoming /out going feeder switches and following accessories .
-
-
-
... More
(i) 63 A four pole Isolator with spreaders terminals etc -1 No.
-
-
-
... More
(b) Out goings
-
-
-
... More
(i) 40A Four pole 100 mA RCBO unit etc -1 Nos
-
-
-
... More
(ii) 25A Double pole 30 mA RCBO unit etc -1 Nos
-
-
-
... More
(iii) 6 A single Pole MCB- 2 Nos
-
-
-
... More
(c) Bus Bar
-
-
-
... More
(i) TP& N aluminium bus bars of minimum of 120 A capacity with heat shrinkable colour coded sleeves and i/c DMC / SMC bus bar supports at required intervals.(Current density in the bus shall not exceed 0.8 A / mm2) (Minimum Busbar size 25mm x 6mm thick)
-
-
-
... More
(c) Indications
-
-
-
... More
(i) LED type indicators for R Y B with fuse protection and toggle switches.-1 set
-
-
-
... More
Complete as above
1
-
-
... More
SH- IX Cable Tray
-
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
750 mm width X 75 mm depth X 2.0 mm thickness
2
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
750 mm width X 75 mm depth X 2.0 mm thickness
2
-
-
... More
SH- X Earthing
-
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Metre long etc. with charcoal/ coke and salt as required.
2
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
10
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
10
-
-
... More
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
10
-
-
... More
Providing Insulating elastomer mats for electrical purposes of 1 mtr. Wide and 2mm thick to withstand 3.3 KV dielectric strength as per -IS 15652:2006 (as ammended upto date) as reqd
2
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
4
-
-
... More
Supplying and Fixing shock treatment chart of at least three languages (Mal - Eng- Hindi) fitted in frame with lamination etc as required.
2
-
-
... More
Supplying & Fixing a set of GI buckets with round bottom each set comprising 4 Nos buckets of 9 litres capacity and inscription 'FIRE' in signal red colour on each bucket including providing & fixing suitable MS brackets with hooks for hanging the buckets, painting & filling two of the buckets with dry sand
2
-
-
... More
Supplying artificial resuscitator for electric shock with chart showing use of it (approved make)
1
-
-
... More
SH- XI DG Set
-
-
-
... More
SITC of factory assembled Diesel Engine Alternator set, Ready to Use (RTU) type, suitable for parellel operation, capable of delivering Prime Power of 62.5 KVA (50 KW) at site conditions of G2 governing class including acoustic enclosure as per latest CPCB IV norms, complete with standard Engine control unit panel, common base frame, AVMs, starting batteries of suitable rating as per manufacturer's recommendation with leads and terminals, charging alternator, external static battery charger with AC input chord and and DC wiring, residential silencer and exhaust flexible piping of standard length, fuel tank of not less than 120 litres capacity , fuel line connections, including lub. oil etc. on the existing cement concrete floor / foundation with all equipment and accessories and as per specifications attached.
-
-
-
... More
A] ENGINE
-
-
-
... More
Naturally aspirated/turbo charged/turbo charged after cooled, water cooled continuous rated CPCB Norms-IV approved engine with 10% over load capacity suitable for above Engine Alternator set at 1500 RPM direct coupling with single bearing alternator and capable of developing adequate BHP as per detailed specifications attached. Make: Ashok Leyland /Cummins/ Cater pillar / KOEL/ Volvo Penta / Mahindra & Mahindra
-
-
-
... More
B) ALTERNATOR
-
-
-
... More
Alternator of brushless type, copper wound, totally enclosed, screen protected with Class H insulation, AVR, capable of developing not less than 62.5 KVA at site conditions at 415 volts, 0.8 PF, 50 Hz, 3 phase, 4 wire, 1500 RPM and suitable for direct coupling with the above engine and as per detailed specifications attached.Make: Crompton Greaves (AL. series) / KEC / Leroy Somer / Stamford/Jyoti Ltd
-
-
-
... More
C) CONTROL PANEL
-
-
-
... More
Suitable cubicle control panel with hinged doors, all accessories including control wiring suitable for operation in conjuction with existing synchronising panel & PLC System and including 1 No. microprocessor based 100A 4 Pole 36 KA MCCB with accessories like necessary spreader terminals, extended rotary handle etc., voltmeter with selector switch, frequency meter, 3 Nos. ammeters, kWh meter, etc., CTs, indication lamps for DG conditions and RYB LED indicating lamps with fuse and switch control etc complete with necessary interconnections, fuses, labels and other accessories suitably mounted inside the acoustic enclosure as required.
-
-
-
... More
D) ACOUSTIC ENCLOSURE
-
-
-
... More
Pre-fabricated factory built, free standing, floor mounting type acoustic enclosure of modular construction suitable for accommodating the 62.5 KVA Engine Alternator set , fuel tank etc as per specifications and conditions attached. The engine and the enclosure shall conform to the latest environment (Protection) Act 1986(29 of 1986) of Ministry of Environment and Forest Notification No. dated 17th May 2002 and 12th July 2004 and 2nd Amendment of 2002 and 2004 respectively and Environment (Protection) (Third Amendment) Rules, 2014 dt 31st March 2014, as amended up-to-date. No set shall be accepted without current and valid CPCB II certificate of authorized agency such as ARAI of Pune, NPL New Delhi, NSTL Vishakhapatnam, FCRI Palghat and NAL Bangalore.
-
-
-
... More
E. ITC of 62.5 KVA Diesel Engine alternator set along with acoustic enclosure and control panel in the existing foundation / CC floor, and conducting trial run and load test i/c supplying consumables like fuel, arranging artificial load, cabling, switching arrangements etc as required. The firm shall top up the fuel tank with additional Diesel for emergency run for 2 hours, after load testing etc as per the specifications attached as reqd.
-
-
-
... More
The control panel shall be mounted inside or outside of the canopy. However it shall be the responsibility of the agency to provide suitable size of armoured XLPE aluminium conductor power cable for power and armoured pvc sheathed pvc insulated copper conductor cable for control circuits (up to 10 mtrs in both the above cases ) with necessary protection pipe and end terminations from E/A Set to the control panel of E/A Set. In case the panel is of out door type suitable weather proof canopy made of 14 guage powder coated MS sheet and mounted on suitable frame work / foundation and no extra payments shall be paid on account of the above arrangement.
-
-
-
... More
AMF panel-62.5 KVA EA set
-
-
-
... More
Supply, installation, testing and commissioning of in built/ extensible AMF panel suitable for 415V, 3 phase, 4 wire, 50Hz, AC supply system fabricated out of CRCA sheet of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c powder coating in approved shade and having 100 A for Phases and 100 A for neutral Copper FRLS wires of high conductivity, bottom base channel of MS sections not less than 100 mm x 50 mm x 6mm thick, entire panel shall have a common copper earth bar of size 25 mm x 3 mm at the rear with 2 nos earth stud, solid connections from main bus bars to switch gears with required size of copper FRLS wires and control wiring with 1.5 sq.mm PVC insulated copper conductor FRLS cable , cable alleys, cable gland plates, i/c providing following switch gears
-
-
-
... More
Note: The panel drawing shall be got approved by the Engineer in charge/Electrical inspectorate before fabrication
-
-
-
... More
Incoming:
-
-
-
... More
100A. 415 V, 36 kA breaking capacity 4 P MCCB with accessories like necessary spreader terminals, extended rotary handle etc. - 2 Nos.
-
-
-
... More
110A 4 P AC - 3 duty power contactor with 2 NO+ 2 NC auxilliary contacts -2 Nos
-
-
-
... More
AMF controller
-
-
-
... More
The controllers include purpose built algorithms and logic to start, stop, control, and protect the genset,open/close circuit breakers and mains supply monitoring with automatic changeover and all associated accessories including providing suitable CT/ PT, fuses etc. ( Genop/ DEIF/ Woodward make) - 1 nos
-
-
-
... More
Outgoing:
-
-
-
... More
100A. 415 V, 36 kA breaking capacity 4 P MCCB with accessories like necessary spreader terminals, extended rotary handle etc. - 1Nos.
-
-
-
... More
Metering
-
-
-
... More
AC Digital type intelligent multifunction meter class 1 with CTs 100/5A rating for measurement of Voltage, Current, Frequency, power factor, KW, KWH & with RS 485 port - 1 Nos
-
-
-
... More
Note: Multifunction meter shall be mounted in separate compartments .
-
-
-
... More
Indications
-
-
-
... More
LED type indication lamps for DG conditions with fuse protection -1 set
-
-
-
... More
LED type indicators for R Y B with fuse protection and toggle switches.-1 set
-
-
-
... More
Complete as above
1
-
-
... More
SH- XII Fire Detection / Fighting System
-
-
-
... More
(A) Supplying, Installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following complete in all respects as required
(B) Horizontal type multistage centrifugal split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS 1520
(C) Suitable HP Squrrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP55 protection for enclosure, horizontal foot mounted type with Class F insulation confirming to IS 325
(D) MS fabricated common base plate coupling, coupling guard, foundation bolts etc as required
(E) Suitable cement concrete foundation duly plastered with anti vibration pads
-
-
-
... More
2280 lpm at 70 m Head
1
-
-
... More
(A) Supplying, Installation, testing and commissioning of diesel engine driven Main Fire Pump suitable for automatic operation and consisting of following complete in all respects as required (Diesel Driven Pump)
(B) Horizontal type multistage centrifugal split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS 1520
(C) Suitable HP 1500 RPM, water cooled with radiator, diesel engine confirming to relevent IS standards complete with auto starting mechanism, 12/24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 M outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding residential silencer, instruments and protection as per standard specification, stop solinoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required.
(D) MS fabricated common base plate coupling, coupling guard, foundation bolts etc as required
(E) Suitable cement concrete foundation duly plastered with anti vibration pads
-
-
-
... More
2280 lpm at 70 m Head
1
-
-
... More
(A) Supplying, Installation, testing and commissioning of Electric driven pressurisation Pump suitable for automatic operation and consisting of following complete in all respects as required (Jockey Pump)
(B) Horizontal type multistage centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS 1520
(C) Suitable HP Squrrel cage induction motor, TEFC, type suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP55 protection for enclosure, horizontal foot mounted type with Class F insulation confirming to IS 325
(D) MS fabricated common base plate coupling, coupling guard, foundation bolts etc as required
(E) Suitable cement concrete foundation duly plastered with anti vibration pads
-
-
-
... More
180 lpm at 70 m Head
1
-
-
... More
(A) Supplying, Installation, testing and commissioning of Electric driven terrace Pump suitable for automatic operation and consisting of following complete in all respects as required (Terrace Pump)
(B) Horizontal type multistage centrifugal split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS 1520
(C) Suitable HP Squrrel cage induction motor, TEFC, type suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP55 protection for enclosure, horizontal foot mounted type with Class F insulation confirming to IS 325
(D) MS fabricated common base plate coupling, coupling guard, foundation bolts etc as required
(E) Suitable cement concrete foundation duly plastered with anti vibration pads
-
-
-
... More
900 lpm at 35 m Head
1
-
-
... More
Providing laying, testing and commissioning of ‘B’ class medium duty GI pipes conforming to IS 1239 i/c welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on wall/ ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Make TATA, Jindal , Zenith)
-
-
-
... More
100 mm dia
60
-
-
... More
80 mm dia
40
-
-
... More
Providing laying, testing and commissioning of ‘C’ class heavy duty MS pipes conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. on surface & providing cement concrete blocks as supports, and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Make TATA, Jindal , Zenith)
-
-
-
... More
100 mm dia
50
-
-
... More
65 mm dia
15
-
-
... More
50 mm dia
35
-
-
... More
40 mm dia
25
-
-
... More
32 mm dia
25
-
-
... More
25 mm dia
60
-
-
... More
Providing, installation, testing and commissioning of following size pressure guage dial type / Bourden type with necessary connections accessories and cock etc as required.
-
-
-
... More
0-100 psi
1
-
-
... More
Providing and fixing of pressure switch in MS pipe line including connection etc as required
3
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post red confirming to TS 884 complete with the following as required
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS 12585
20 mm nominal internal dia gun metal globe valve & nozzle
Drum and brackets for fixing the equipments on wall
Connections from riser with 25 mm dia stop gun metal valve & MS Pipe and socket
-
-
-
... More
30 M
6
-
-
... More
Supplying and fixing 63 mm dia 15 Metre long RRL hose pipe with 63 mm dia Male and Female couplings duly bound with GI wire, rivets etc conforming to IS 636 (type-A) as required.
-
-
-
... More
Gun Metal
6
-
-
... More
Supplying and fixing of hose cabinet of size 900mm x 600 mm x 500 mm made of 2mm thick MS sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate 2 nos. 15 m long Hose pipe, 1 no. branch pipe, & nozzle mounted on wall & duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for following hydrants, as required.
-
-
-
... More
i) Internal Hydrant
6
-
-
... More
Supplying and fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 13095 of following sizes as required.
-
-
-
... More
100 mm dia
5
-
-
... More
80 mm dia
2
-
-
... More
65 mm dia
3
-
-
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrant to reduce pressure at the outlet to the level of 3.5 kg/cm 2 complete as required
3
-
-
... More
Providing installation testing and commissioning of non return valves of following sizes confirmiong to IS 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required
-
-
-
... More
100 mm dia
5
-
-
... More
80 mm dia
2
-
-
... More
65 mm dia
3
-
-
... More
Providing installation, testing and commissioning of stainless steel Y-stainer fabricated out of 1.6 mm thick stainless steel Grade 304, sheet with 3 mm dia hole with stainless steel flange
-
-
-
... More
80 mm
5
-
-
... More
100 mm
5
-
-
... More
Supplying and fixing of fire brigade connection of CI body with Gun Metal male instantaneous inlet couplings complete with cap and chain as required. For suitable dia M.S. Pipe connection conforming to IS : 904 as required.
-
-
-
... More
3 way 150 mm dia MS Pipe
1
-
-
... More
Providing, fixing, testing and commissioning of 15 mm size quartzoid bulb type sprinklers of rating 68 deg C with required accessories.
-
-
-
... More
Pendent Sprinkler
19
-
-
... More
Supplying installation testing and commissioning of sprinkler flexible pipe (U/L listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (inlet) 25mm NPT male thread to sprinkler head (Outlet) 15 mm NPT female thread with reducer nipple 2 side brackets, center bracket, stockbar of following size complete as required
-
-
-
... More
700 mm
16
-
-
... More
Providing and fixing flow switches in following MS pipe including connection etc as required
-
-
-
... More
100 mm dia
3
-
-
... More
Providing Insulating elastomer mats for electrical purposes of 1 mtr. Wide and 2mm thick to withstand 3.3 KV dielectric strength as per -IS 15652:2006 (as ammended upto date) as reqd
10
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
-
-
... More
Supplying and fixing Air Release Valve etc as required
1
-
-
... More
Supplying and fixing air vessel made of 250 mm dia 8 mm thich MS sheet 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure guage and painting with synthetic enamel paint of approved shade as required
1
-
-
... More
Supply installation testing and commissioning of microprocessor based intellegent addressible main fire alarm panel cental processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length upto 12 KM, network communication card, minimum 320 character graphics/LED display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230+-5%V, 50 Hz) 48 Hrs backup with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of teh schedule of work unser SH PA System) and shall be complete with all accessories. The panel shall be compatable for IBMS system with open protocol BACnet/Modbus over IP complete as per specifications
-
-
-
... More
NB:-PA system included in this sub head itself
-
-
-
... More
Two loop Panel
1
-
-
... More
Supply installation testing and commissioning of intellegent analog addressible photo thermal detector complete with mounting base complete as required.
54
-
-
... More
Supply installation testing and commissioning of intellegent addressable thermal detector with rate of rise cum fixed temperature thermistor complete as required
11
-
-
... More
Supply installation testing and commissioning of the addressable Manual call point complete as required
9
-
-
... More
Supply installation testing and commissioning of the addressable Horn cum strobe complete as required
3
-
-
... More
Supply installation testing and commissioning of intellegent addressable programmable sounder complete as required
6
-
-
... More
Supply installation testing and commissioning of fault isolator complete with base as as required
5
-
-
... More
Supply installation testing and commissioning of the addressable fire control module complete as required
1
-
-
... More
Supply installation testing and commissioning of 6 zone voice alarm controller with USB, MP3 player ( including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required
1
-
-
... More
Supply installation testing and commissioning of 1.5/ 3/6 W metal box ceiling / wall speakers complete as required
6
-
-
... More
Supply installation testing and commissioning of 1.5/ 3/6 W metal box ceiling / wall speakers complete as required
6
-
-
... More
Supply installation testing and commissioning of ceiling / wall mounted loud speakers 3/1.5 W in ABS enclosure complete as required
6
-
-
... More
Supply installation testing and commissioning of digital audio amplifier 50W, 25 v RMS operating at 240V AC supply complete as required
1
-
-
... More
Supply installation testing and commissioning of Voice command keypad 6 zone , with microphone assembly complete as required
1
-
-
... More
Supplying & laying 2x1.5 sqmm fire alarm armoured cable, 600/1000v rated with annealed copper conductor having XLPE insulation steel wire armouring & FRLS outer sheath complete as required.
400
-
-
... More
Supplying & drawing of cable Fire retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and inter connections etc as required.
-
-
-
... More
Speaker cable two pair, 2 core, 1.5 sqmm
90
-
-
... More
SH- XIII Air Conditioning
-
-
-
... More
Supplying Installation Testing and commissioning of 1.5 TR High wall inverter type split AC unit 5 star as per BEE star rating , minimum (ISEER) of 5 with temperature control thermistor, remote control unit, filters, necessary refrigerant - R32, rotary / scroll type compressor, copper tubes for both indoor and outdoor unit and supplying the following up to the length of 3 metres (1) hot and cold refrigerant piping each (2) suitable connecting electrical cable between indoor and outdoor unit (3) standard PVC drain pipe of suitable size i/c providing and fixing readymade powder coated frame for installing outdoor unit, topping up of refrigerant if required, transportation of all of the above to the various site etc as required .The unit shall have at least 5 years manufacturer's Machine warranty including PCB and 10 years Warranty on compressor as per the following GeM classification.
-
-
-
... More
Supply of above AC units with standard items refrigerant pipes etc at site
14
-
-
... More
Standard Installation Testing and Commissioning Charges for above High wall inverter type Split type AC
14
-
-
... More
Supplying and Fixing powder coated Outdoor unit mounting stand suitable for 1.5 TR Split type AC
14
-
-
... More
Supplying and fixing combined supply and return refrigerant copper piping suitable for the AC units available at site, i/c supply and providing necessary thermal insulation, interconnection between indoor and out door unit beyond 3 mtr supplied along with unit in item no.1 etc. as reqd.
40
-
-
... More
Supply and drawing 3cx 2.5 sqmm pvc insulated copper conductor cable to extend AC supply between indoor and out door unit beyond 3 mtr supplied along with unit in item no.1 i/c giving connections tc as required
40
-
-
... More
S/F the 63 mm dia size good quality ISI mark 4 Kg ,PVC pipe with accessories for protection of refrigerant pipe / drain water connection etc. as required.
80
-
-
... More
S/F the 20mm dia size good quality ISI mark 4 Kg ,PVC pipe with accessories for protection of refrigerant pipe / drain water connection etc. as required.
60
-
-
... More
SH XIV- Additional item
-
-
-
... More
S/L of 2 core x1.5 sqmm Cu conductor PVC/XLPE insulated PVC sheathed armoured FRLS cable with ISI mark on wall/ceiling/cable tray including providing the glands where ever necessary as required.
1500
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
3 x 2.5 sq. mm
2500
-
-
... More
Supplying, laying and fixing of one number PVC insulated and PVC sheathed/XLPE, Armoured Al power cable of 1.1KV grade of 3.5C 185 sq.mm in following ways including all necessary accessaries as required.
-
-
-
... More
in the existing masonry open duct
10
-
-
... More
on wall surface (clamped with 25/40 x 3mm MS flat clamp)
40
-
-
... More
Supplying and providing 4" dia MS pipe 'B' class and insulation with mineral wool/rock wool, 50mm thick wire mesh, aluminium cladding as exhaust line of 62.5KVA DG set upto the roof top of the building with necessary supports along the outer surface etc as required.
22
-
-
... More
Supplying and providing insulation with mineral wool/rock wool, 50mm thick wire mesh, aluminium cladding over the residential silencer of 62.5KVA DG set with necessary supports etc as required.
1
-
-
... More
Supplying and fixing DIN mounting whole current operated KWH meter in DB to meet the requirement of IGBC rating for Green buildings.
-
-
-
... More
Single phase
5
-
-
... More
Three phase
5
-
-
... More
S/F wall mounting type ISI marked CO2 fire extinguisher of 4.5 KG capacity i/c providing necessary hooks etc as required ( make with ISI)
12
-
-
... More
S/F GI bucket each set comprising of two nos bucket of 9 ltr capacity and inscription " FIRE" in signal red colour on each bucket i/c p/f M.S.brackets with hooks for hanging the buckets painting and filling the bucket with sand etc as required.
1
-
-
... More
S/L of 3 core x4.0 sqmm Cu conductor PVC/XLPE insulated PVC sheathed armoured FRLS cable with ISI mark on wall/ceiling/cable tray including providing the glands where ever necessary as required.
150
-
-
... More
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.
6
-
-
... More
Important note 1 :- Obtaining approval from Electrical inspectorate for the whole electrical installations in the building before charging including that for LIFT and preparation of necessary drawings are included in the scope of work without any additional payment.
-
-
-
... More
Important note 2 :- Approval from Fire & rescue department for the AFDS and fire fighting system in the buildingand preparation of necessary drawings are included in the scope of work without any additional payment.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements