Bharat Sanchar Nigam Limited Tender

SITC of outdoor metering cubicle made of powder coated 14 G sheet steel with suitable base frame comprising of 11KV, 630A, 25 KA for 1 sec, 350 MVA short circuit fault level Load Break Switch with earth switch, 1 no. resin cast fixed type PT - 3 ph, 25 VA, 11 KV/110V, Cl 0.2, 3 nos.Resin cast CTs - */5A, 10 VA, Cl 0.2S, S/F TOD Meter with Accuracy class 0.2S along with necessary supports, 630 A TP Copper bus, HT fuses - 3 nos. (suitable rating), space heater with thermostat, shunt trip coil, seal off bushings i/c erecting the metering cubicle with suitable angle iron frame and concrete foundation etc as required and as per attached specifications.(CTs, PT and TOD meter shall be of KSEB approved make only ) Note: 1. The CT-PT unit and the HT TOD meter shall be got tested from the local TMR as per KSEB norms.2 ) The fee for the CT/PT/TMR testing shall be paid by the agency and has to liaise with various KSEB offices for the completion of work .Nothing extra will be paid on this account by the department. 3. CT Ratio shall be as per the direction of Engineer in-Charge.

Supply of armoured, aluminium conductor XLPE power cable of 11 KV (unearthed system) grade conforming to IS 7098(PartII) amended up to date as per the following size aluminium conductor XLPE UG cable with ISI mark complete as required. (a) 3 x 300 Sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (a)Above 120 sq. mm and upto 400 sq. mm... Note: M Sand may be used instead of river sand.