Bharat Sanchar Nigam Limited Tender

a) 25 mm average thickness in 2 layers.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Thermo-Mechanically Treated bars of grade Fe-500D or more.: Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspectionof work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment shall be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Finishing walls with Acrylic Smooth exterior paint of required shade :

a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

b) Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour

a) One coat.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade

a) One or more coats on old work.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:

a) Two coats

Renewing glass panes, with wooden fillets wherever necessary:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Cleaning the inservice manholes/chambers by removing the sludge settled at bottom including washing the walls, flushing with to make free flow through sewer lines replacing the cover slab in position and pointing alround with cement mortar etc. all complete as directed by Engineer-in-charge.

Providing and fixing PVC pipes of pressure 10 Kg per sqcm for water supply, including all PVC plain & threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engineer in Charge i) Internal work - Exposed on wall

a) 25 mm outer dia PVC pipe

Providing and fixing on wall face unplasticised Rigid PVC soil, waste and vent pipe conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, External work including trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

a) Single socketed pipes- 160 mm outer dia.

Easening of Door shutters with necessary chiselling edges of shutter/ frames , adjusting hinges/ tower bolts as required: a) Door shutters

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete a)10 litre capacity - White

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore

Providing and fixing PTMT bib cock of approved quality and colour a) 15mm nominal bore, 90 mm long. Weighing not less than 93 gms.

Providing and fixing PTMT stop cock of approved quality and colour a) Concealed stop cock, 15 mm nominal bore, 108mm long. Weighing not less than 108 gms.

Providing and fixing PTMT pillar cock of approved quality and colour a) 15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms.