Visvesvaraya Technological University Tender

code4 - 40 mm dia, 2.5 mm thick

code5 - Point wiring using Copper wire without switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Make: Anchor/Havells/Finolex

code6 - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box

code7 - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box

code8 - Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of GROUP -A. Make: Finolex/Anchor/RR Kabel/Havells a) 1.5 Sqmm

code9 - 2.5 Sqmm multistrand copper wire

code10 - 4.0 Sqmm multistrand copper wire

code11 - 16 Sq.mm multistrand copper wire

code12 - 35 Sq.mm multistrand copper wire

code13 - Supplying and drawing 4 Core x 6 Sqmm Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990. Make: Finolex/Anchor/RR Kabel/Havells

code14 - Supplying and flush mounting unbreakable PVC mouldar box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. Make: Anchor Woods/Crabtree/Legrand a) 3 Way

code15 - 8 Way

code16 - 10 -12 Way

code17 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Make: Anchor Woods/Crabtree/Legrand a) 3 Module

code18 - 8 Module

code19 - 10-12 Module

code20 - Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 Make: Anchor Woods/Crabtree/Legrand a) 6 Amps 3 way socket.

code21 - 6 Amps one way switch

code22 - 16 Amps one way switch with indicator

code23 - 6/16 Amps Universal socket

code24 - Supplying and fixing 8 Way regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings onfirming to IS/IEC 60898 - 2. Make: ABB/Legrand/Schneider Electric/Siemens/

code25 - Supplying and fixing 3 pole 160 amps Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. Make: ABB/Legrand/Schneider Electric/Siemens/

code26 - Supplying & fixing 63 amps TP 4 pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: ABB/Legrand/Schneider Electric/Siemens/

code27 - Supplying and fixing regular 4 way TPN double door MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. Make: ABB/Legrand/Schneider Electric/Siemens/

code28 - Supplying & fixing 10 amps single pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: ABB/Legrand/Schneider Electric/Siemens/

code29 - Supplying & fixing 20 amps double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: ABB/Legrand/Schneider Electric/Siemens/

code30 - Supplying & fixing 32 amps 4 pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: ABB/Legrand/Schneider Electric/Siemens/

code31 - Supplying & fixing 32 amps 4 pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: ABB/Legrand/Schneider Electric/Siemens/

code32 - Supplying of 4 feet -PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. Make: Bajaj/Crompton Greaves/Havells/Philips/ Wipro/

code33 - Supplying of LED modular down light 1'x4' 34-36W LED recessed luminaries with LED modular down light system wattage. Housing shall be with pressure die cast aluminium alloy with corrosion proof resistant polyester powder coated. Driver operates with voltage range from 100V to 270V, 50/60 Hz with short circuit, over load and mis-wiring protection. Lumen maintenance of 70% at 50000 hrs. Injection moulded polycarbonate diffuser for better mechanical stability, light transmission & avoid pot hole effect. junction temperature shall be, 70 degree Celsius. Driver is on constant current driver @0.06A with PFgreater than 0.92 with line voltage @220-240 volts @ 50/60 Hz, driver efficiency greater than 85% &THD less than 15%. LED efficiency greater than 130lm/W at 1W & Fixture efficiency greater tha n75Lm/W with CRI greater than 75 with injection moulded polycarbonate lens with less than 80mm depth. 5 years warranty against any manufacturing defect working under standard electrical condition Make: Bajaj/Crompton Greaves/Havells/Philips/ Wipro/

code34 - Supply of 100 watts High Bay Downlight with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moulded olycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage angle from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 100 W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved /Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED anufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. Make: Bajaj Blaze or equiavlent in Crompton Greaves/Havells/Philips/ Wipro/

code35 - Earthing: Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia

code36 - Supplying and running of 25x3 mm Copper Strip with Sleeves for grounding connections using necessary fixing materials as required.

code37 - Supplying and running of 25x3 mm GI Strip with Sleeves for grounding connections using necessary fixing materials as required.

code38 - Supplying and running of 600x600x3mm Copper Plate for grounding connections, using necessary fixing materials as required.

code39 - Fixing all types and all capacities of fluorescent / false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders.

code40 - Supplying of 120 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 Make: Polycab/KEI/Havells/Unistar

code41 - Supplying and fixing of 20 amps single phase tempra industrial socket along with plug and with provision for housing MCB and ELCB. But rates does not include MCB and ELCB Cost. Make: Legrand Model No. 5078 14 or equivalent in ABB/Schneider Electric.

code42 - Supplying and fixing of 32 amps single phase tempra industrial socket along with plug and with provision for housing MCB and ELCB. But rates does not include MCB and ELCB Cost. Make: Legrand Model No. 5078 14 or equivalent in ABB/Schneider Electric.

code43 - Fabricating and supplying of electrical panel board made out of 14/16SWG and with follwoing specifications - Incomer - 250 amps (4 Pole MCCB), LED indication lamps with control MCBs, CT's, Earth Leakage Relay (ELR), Busbar rated for 250 amps, outgoing - 5 nos of 63 amps MCB. MCCBs Make should be ABB/Legrand/Schneider Electric/Siemens/