Visvesvaraya Technological University Tender

code04 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills,facias and similar locationsof required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up,including rubbing, curing, moulding and polishing to edges to give highgloss finish etc. complete at all levels. Area of slab over 0.50 m2

code05 - Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge

code06 - Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location inGranite, including necessary holes for pillar taps etc. including moulding,rubbing and polishing of cut edges etc. complete.

code07 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm and down size graded crushed coarse aggregates.

code08 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code09 - Providing, fabricating, assembling and fixing in position aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm.thick having section weight, plain sections 2.40kg/m single grove section 2.541kg/m. and double grovesection 2.683 kg/m and bottom 46 kg/m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided with 12mm. thick prelaminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9m. from floor level; and 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with lower sections, the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm. weight 0.124kg/m; aluminium sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door opening) All the frame should be throughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. using aluminium section anodized to powder coated to minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.

code10 - Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class economy

code11 - Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy

code12 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes

code13 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per directionof Engineer in Charge. External work

code14 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

code15 - Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings : Flat back wash basin of size 630x450 mm

code16 - Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g

code17 - Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600X600X19mm with exposed grid for hospitals, Shopping malls, commercial establishments and office complexes. The tiles should have humidity Resistance (RH) of 99%, Light Reflectance 87%, Thermal Conductivity k=0.052-0.057 w/m K, NRC-0.7, Colour White, Fire Performance UK A2 S1, d0, with Anti Microbial coating on the face of the tile, suitable for zone 4 area according to NF S 90-35:2003 with cleanroom class of ISO 5 (Class 100), Decontamination class of CP10 and Bacteriological Cleanliness Clas B1 for specific strains and reduction in colony size. Washability properties of 500 wash cycles as per ASTM D-4828 and suitable for Green Building application with Recycled content of 37%. The tile shall be laid on 24 mm wide T-section flanges colour white having rotary stitching on all T sections i.e, the main runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 15 kgs/Sqm & pull out strength of minimum 100 kgs. The T sections should have a Galvanizing of 90 grams per Sqm and need to be installed with Suspension system of approved make.

code18 - Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body , door weight upto 35 kg and door width upto 700mm) with necessary accessories and screws etc complete.

code19 - Providing and supplying of MS Almerah having 18 nos of lockers in it including manufacturing, painting , labour, lead and lift charges complete as per the specifications.

code20 - Providing and supplying of slotted iron M S Rack including manufacturing, painting , labour, lead and lift charges complete as per the specifications.

code21 - Work Bench without vice 1800mm X 900mm , Supplying of work Bench made of MS frame work using 50 X 50 X 6mm with 50 mm Hard for top surface complete as per specifications and as directed by Engineer in charge including cost of all materials, labour, lead and lift charges and all other incidental charges.

code22 - Providing and fixing of pin up boards of size 2' X 3' complete including cost of all materials, labour , lead and lift charges and all other incidental charges .

code23 - Providing and fixing of writing boards of size 2' X 3' complete including cost of all materials, labour , lead and lift charges and all other incidental charges .

code24 - Electrical Works: Supplying heavy gauge PVC conduit pipe 25mm dia, 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. Make: Avonplast/Bajajplast/VIP/

code25 - Supplying and fixing of 25 mm PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. Make: ModiPlast/ Prestoplast

code26 - 50 mm

code27 - Supplying GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated Make: As aprpoved by the engineer-in-charge.

code28 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. Make: Anchor/Havells/Finolex/ 1.5 Sqmm multistrand copper wire

code29 - 2.5 Sqmm multistrand copper wire

code30 - 4.0 Sqmm multistrand copper wire

code31 - 6.0 Sqmm multistrand copper wire

code32 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990. Make: Anchor/Havells/Finolex/ 3 core x 2.5 Sqmm multistrand copper wire

code33 - Supplying and fixing surface mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. Make: Anchor Roma/Havells Crabtree/Legrand/ 3 module

code34 - 8 module

code35 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Make: Anchor Roma/Havells Crabtree/Legrand/ 3 module

code36 - 8 module

code37 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Make: Anchor Roma/Havells Crabtree/Legrand/ 6 Amps one way switch

code38 - 6 Amps three way socket

code39 - 16A One Way Switch

code40 - 6/16A Universal Socket

code41 - Supplying and fixing regular double door MCB distribution boards on wall/wood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. Make: ABB/Legrand/Siemens a) 4 way TPN DB

code42 - Supplying and fixing 10 amps TPN miniature circuit breaker on existing MCB distribution board using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: Legrand/ABB/Siemens

code43 - Supplying and fixing 32 amps TPN miniature circuit breaker on existing MCB distribution board using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: Legrand/ABB/Siemens

code44 - Supplying, fixing and wiring 32 amps 4 pole Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. Make: Legrand/ABB/Siemens

code45 - Supply of round surface mounted rolling type LED Downlight with 18W GU10LED LampRib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eyeball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. PowerInput:220-240V @ 50/60 Hz & Powerfactor Greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition Make: Bajaj/Crompton Greaves/Havells/Pihilips/Wipro

code46 - Fixing all types and all capacities of fluorescent/falseceiling/spotlight/CFL/LEDfittings indoor on the wall/ceiling/ rafters/girders using 23/0.0076" twin twisted PVC insulated wires,required Nos of round blocks and clamps. Make: Bajaj/Crompton Greaves/Havells/Pihilips/Wipro

code47 - Supplying and fixing of T8 36/40W Fluorescent Tube with 36W power consumption with initial lumen of 2750 (3000degK/4000degK) with rated avg life of greater than 10000hrs. Operating voltage range from 180V to 265V. 50Hz AC power Supply. (PWD Electrical SR 2023-2024, Page No. 49, Item No. 12.20) Make: Bajaj/Crompton Greaves/Havells/Pihilips/Wipro

code48 - Supplying & Fixing of 230 V 20/40 W starter for Fluorescent Lamp. Make: Bajaj/Crompton Greaves/Havells/ Pihilips/Wipro

code49 - Supplying & Fixing of 230 V 20/40 W Fluorescent Lamp holder. Make: Bajaj/Crompton Greaves/Havells/ Pihilips/Wipro

code50 - Supplying and fixing of 40W heavy duty open construction Ferromagnetic copper ballast for fluorescent tubes: Supplying and fixing of 40W heavy duty open construction Ferromagnetic copper ballast for fluorescent tubes, Class H Insulated copper wire,Vacuum impregnated high quality with Low loss silicon steel lamination operated on 240V, 50Hz supply with IEC 60920 (Safety) & IEC60921 (Performance). Operating voltage range from 180V to 265V, 50Hz AC power Supply. Make: Bajaj/Crompton Greaves/Havells/ Pihilips/Wipro

code51 - Supplying of self-adhesive PVC electrical insulation tape - 1.70cm x 6.5m x 0.125mm, Black, 6.5 m. Make: Anchor streel grip (25 nos of each colour i.e. Red/Yellow/Blue/Black/Green