Visvesvaraya Technological University Tender

code04 - Writeing board: Providing makeing and fixing ceramic Green Board of size 3600mm X 1200 of approved make along with white marker board of size 1830X1200mm made out of 19mm thcick Ply Boards with suitable sliding channels of Aluminium. The Green ceramic boards made out of Frame materials Andoized Aluminiumm channel Board material E3 Poly vision Belgium Ceramic surface sheet. the double surface Alumininum frame and galvanized steel bottom make the board durable. Thease board should have good surfaces than can be easily earsed. And the White marker board shall be made out of 19mm thick Ply Boards finished with 1mm thick Ply Boards finished 1mm thick white marker Laminate on one side & the back side should be finished with approved colur laminate all the edges should be finished with 20mm thick teak wood beading fixed on slideing channels and slideing wheels etc complete as per the directions of the Elc, rate include all transportaion,loading,unloading labour charges, nails, screws.hardware, HOM etc complete as per specification.

code05 - Electrical Works: Supplying heavy gauge PVC conduit pipe 25mm dia, 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. Make: Avonplast/Bajajplast/VIP/

code06 - 40mm dia, 2mm thick

code07 - Extra for Groove cutting in brick wall to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.

code08 - Extra for Groove cutting in CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.

code09 - Supplying and fixing of 25 mm PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. Make: ModiPlast/ Prestoplast

code10 - 50 mm

code11 - Supplying GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely. Make: As aprpoved by the engineer-in-charge.

code12 - 32 mm

code13 - 50 mm

code14 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. Make: Anchor/Havells/Finolex/ 1.5 Sqmm multistrand copper wire

code15 - 2.5 Sqmm multistrand copper wire

code16 - 6.0 Sqmm multistrand copper wire

code17 - 10.0 Sqmm multistrand copper wire

code18 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. Make: Anchor Roma/Havells Crabtree/Legrand/ 3 module

code19 - 8 module

code20 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Make: Anchor Roma/Havells Crabtree/Legrand/ 3 module

code21 - 8 module

code22 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Make: Anchor Roma/Havells Crabtree/Legrand/ 6 Amps one way switch

code23 - 6 Amps three way socket

code24 - Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. Make: ABB/Legrand/Siemens a) 4 way TPN DB

code25 - Supplying and fixing 10 amps TPN miniature circuit breaker on existing MCB distribution board using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: Legrand/ABB/Siemens

code26 - Supplying and fixing 32 amps TPN miniature circuit breaker on existing MCB distribution board using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: Legrand/ABB/Siemens

code27 - Supplying and fixing 32 amps TP miniature circuit breaker on existing MCB distribution board using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: Legrand/ABB/Siemens

code28 - Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/panel board. Make: Legrand/ABB/Siemens

code29 - Supplying and fixing 4 way regular VTPN MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with olyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. Make: Legrand/ABB/Siemens

code30 - Supplying and fixing 125 amps Triple pole 25KA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. Make: Legrand/ABB/Siemens

code31 - Networking works: Supplying and drawing CAT 6 UTP cable. Make: D-Link/Commscope/

code32 - Supplying and fixing 12U network rack 450 mm depth. Make: Netrack/Rittal/Valrack

code33 - Supplying and fixing power strip for the above metioned network rack. Make: /D-Link/Molex/Finolex/Systimax

code34 - Supplying and fixing of fans for the above metioned network rack. Make: /D-Link/Molex/Finolex/Systimax

code35 - Supplying fixing of 48 Port Gigabyte (manageable) Network Switches Make: HP/Cisco

code36 - Supplying and fixing of Information outlet socket with backbox (PWD Electrical SR for the year 2022-2023, page no. 27, Item no. 8.10.2) Make: /D-Link/Molex/Systimax

code37 - Supplying and fixing of 1 mtrs CAT 6 Patch Cord. Make: /D-Link/Molex/Finolex/Systimax

code38 - Supplying and fixing 24 port 1/100/1000 fiber patch panel for LAN Cabling. Make: /D-Link/Molex/Finolex/Systimax

code39 - Supplying of HAND GLOVES complete. Make: As approved by Engineer-in-charge.

code40 - Supplying of FIRST AID BOX complete. Make: As approved by Engineer-in-charge.

code41 - Supplying and installation of RUBBER MAT 1 Mtr x 1 Mtrs -10 mm thick complete. Make: As approved by Engineer-in-charge.

code42 - CCTV: Supplying, installation, testing and commissioning of 2 Megapixel Fixed Dome lens IP Camera with following specification 2 Megapixel CMOS Vandal-proof Network Dome Camera (1920x1080) Image Sensor 1/2.9" Progressive Scan CMOS or better, maximum resolution (1920x1080), fixed focal lens, focal length 2.8mm or better, aperture F1.8, field of view 110 degree horizontal) and 60 degree vertical, 109 degree diagonal, shutter time less than 1/5 sec to 1/25000 sec or better, removable IR--cur filter for day and night function, minimum illumination of 0.3 Lux @ F1.8 (colour) and 0.04 Lux @F1.8 (B/W), 48x digital zoom (4x on IE plug in, 12x built in), Built in IR illuminators, effective upto 20 meters of more, IR LED-8, On board storage facility with MicroSD/SDHC/SDXC card slot for seamless recording. The cameras should support both H.264 and MPEG compression with maximum frame rates of 30fps (1920x1080) in both compression modes. The maximum streams should be 4 or more. Further, the dynamic range should be 65DB or better, video streaming with adjustable resolutions, quality and bitrates. The image setting should have time stamp, test overlay, flip and mirror, configurable brightness,, contrast, saturation, sharpness, white balance, exposure control, gain backlight compensation, privacy masks, scheduled profile setting, 3D noise reduction, video rotation and defog. The camera should support upto 10 live view session or more at a time. The cameras should be ONVIF compliant and with 10 Base-T/100 Base-TX Ethernet (RJ45), The cameras should support five window video motion detection. Alarm triggers -motion detection, manual trigger, periodical trigger, system boot, recording notification, camera tampering detection. The cameras should be powered over Ethernet (PoE) for quick and easy installation when used with the plug and play features with Network Video Recorders (NVRs). Further, these cameras should be ONVIF complainant. Make: Axis/Bosch/Mobotix/Panasonic/Pelco/Samsung/Vivotek

code43 - Supplying, installation, testing and commissioning of 32 Channel Network Video Recorder (NVR) with following technical specifications. The Network Video Recorder (NVR) should support third-party IP cameras (Network/ONVIF compliant) and should support running of video management software. The NVR Connect Up to 32 Cameras, 12MP Resolution & 30 FPS Frame Rates, with four numbers of 8TB hard disk Storage Capacity, H.265, H.264, MJPEG Compression 1/8" Audio Input and Output, HDMI and VGA Outputs, Live View & Playback Fisheye Dewarp Multiple Alarms & Monitor Enhancements Supports iOS and Android Live Viewing ONVIF-Compliant. Make: Bosch/Vivotek/Honeywell

code44 - Supplying and installing 8TB Surveillance Hard Drive for above Network Video Recorder. Make: Western Digital/Seagate

code45 - Supplying and laying of 12 Core single mode armoured fiber optic cable from existing Data Centre to New Classroom complex building Make: /D-Link/Molex/Finolex/Systimax

code46 - Supplying of 150mm dia HDPE pipe (PE 100 grade) for laying armoured fiber optic cables from from existing Data Centre to New Classroom complex building Make: As approved by the engineer-in-charge

code47 - Supplying and fixing 12 port loaded LIU kit. Make: Systimax/D-Link/Molex

code48 - Supplying of single mode Fiber Optic Patch Cord LC - SC. Make: As approved by the engineer-in-charge

code49 - Supplying and fixing of Small form-factor pluggable transceiver. Make: Systimax/D-Link/Juniper