Visvesvaraya Technological University Tender

code4 - Dismantling precast concrete or stone slabs in walls,partition walls etc. including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Thickness above 40mm upto 75mm

code5 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata..All kinds of soils. Depth upto 1.50 m

code6 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

code7 - Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto1.5 m.

code8 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500X700 mm internal dimensions,total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with1:1.5:3mix (1cement:1.5finesand:3 graded stone aggregate20 mm nominal size),foundation concrete1:5:10 (1cement:5 finesand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45cm deep for pipeline with one or two linlets :With common burn tclay (non modular) bricks of class designation 3.5

code9 - Extra for depth beyond 45cm of brick masonry chamber: For 500x700 mm size With common burnt clay(non modular) bricks of class designation 3.5

code10 - ProvidingandfixingUnplasticisedPolyvinylChloride(uPVC)pipes,for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 150 mm nominal dia Pipes

code11 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (I.No. 2.2.1 ,P.No.15,Vol-01, of PWD SR 2023-24).

code12 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

code13 - Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and lead

code14 - Cast in Situ Cement Concrete M20 Kerb Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 PCC M20 grade for kerb Cast in Situ

code15 - Manufacturing, supplying and fixing storage unit of 0.60m deep using 19mm Plywood and finished with 1.0mm thick laminate for external surface and 0.8mm for internal surface , including cost of brass fittings, parliamentary hinges, C handles, tower bolts, magnetic catches, approved brand lock, adhesives, synthetic resins, nails, screws etc., complete including cost of all materials, labour charges, complete as per specification.

code16 - Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer,over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.

code17 - Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code18 - Providing,Supplying and installation of PVC sports mat to table tennis court of having thickness 4.50 MM of approved quality and colour should be Denim Blue including the cost of materials,labour and transportation complete as per specifications and as per directions of Engineer-in-Charge.

code19 - Dismantling tile work in floors and roofs laid in cement mortar includ ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to 25 mm

code20 - Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete

code21 - Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge

code22 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code23 - Providing and fixing of SS mesh to windows with aluminum Section including cost of material, labours,transportation and fitting charges complete as per specifications and as per directions of Engineer-in-charge.

code24 - Providing and fixingSteel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixinginpositionandapplying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour,usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

code25 - Providing and supplying 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS:15786:2008 of approved brand and shade with suitable full threaded steel screws etc. for use in partitions, boxes, side tables, bedside tables, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc.all complete as per direction of Engineer-in-charge.

code26 - Providing and Supplying and fixing sliding door shutter with aluminum channel section with sliding rails of size 2.4 m height using 19mm Plywood and finsihed with 1.00mm thick external and internal surface Lammiinet , including cost of brass fittings, hinges, C handles, tower bolts, magnetic catches, adhesives, synthetic resins, nails, screws,locking system etc., complete including cost of all materials, labour charges, complete as per specification.

code27 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc.with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²)including cost of materials, labour, usage charges of machinery complete as per specifications.

code28 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS:733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gaske tetc. Aluminium sections shall be smooth,rust free,straight,mitred and jointed mechanically wherever required including cleatangle ,Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge.(Glazing,paneling and dash fasteners to be paid for separately):For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron)including cost of materials, labour, usage charges of machinery complete as per specifications.Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS:733 and IS:1285,f ixing with dash fasteners of required dia andsize,including necessary fillingup the gaps at junctions,i.e. attop,bottom and sides with required EPDM rubber/neoprene gasketetc.Aluminium sections shallbe smooth,rustfree,straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /stainless steelscrews,all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion :Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron )including cost of materials, labour, usage charges of machinery complete as per specifications.

code29 - Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Gradel Typell, in panelling fixed in aluminum doors,windows shutters and partition frames with C.P.brass/stainless steel screws etc.complete as per architectural drawings and directions ofengineer-in-charge:Pre- laminated particle board with decorative lamination on one side and balancing lamination on other sideincluding cost of materials, labour, usage charges of machinery complete as per specifications.

code30 - Repairs to existing aluminium partition including glass,board,lock,handle, beading etc cost of all material,labour,complete as per specifications.

code31 - Dismantling doors,windows and clerestory windows(steel or wood)shut-ter including chowkhats, architrave, holdfastsetc. complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge..O farea beyond 3m²

code32 - Providing and fixing of 100mm deep notice board made out of Aluminum Section,19mm Ply at back ,soft board and fabric with powder coated aluminumhinged shutters with 6mm clear glass with necessary hardwares like lock,knobs etc,

code33 - Providing&supplying Carpet/Mat of 800+gsm with stain proof, flexible and super absorbent fibre of good qualityas per direction of Engineer in charge.

code34 - Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails,covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to forms tiles & 5mm thick&75mm wide Prelaminated PVC Sheets for to prail,lockrail & bottom rail one i ther side & 5mmthick,20mm wide cross PVC sheet as gap insert for top rail& bottomrail, Panelling of 5mm thick PVC sheet Prelaminated one ither side fitted in the M.S.frame, Sealed to the stiles &rails with PVC Designer beading on either side & joined together with solvent cement adhesiveetc., Complete as per manufacturers specification &direction of Engineer-in-charge fixed to frames with 3nos of 75mm Aluminium hinges. do-with one side prelam

code35 - Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge.The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.

code36 - Providing and fixing chromium plated brass handlesof 100/125 mm with necessary screws etc.complete.

code37 - Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc.complete: 200x10mm

code38 - Providing and fixing bright finished brass butt hinges with necessary screws etc.complete: 125x85x5.5mm(heavytype)

code39 - Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch.

code40 - Providing & fixing of 2-trackx2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer)and leadfree,gaskets-grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5mm for the sash. Co extruded Glazing bead for fixing ed with 5mmplain float glass,standard hardware & single point locking system with touch lock.Wall thickness offrame & sashshall be of 1.8+-0.2 mm. Maximum possible size - 1519mm x 1519mm. (The costis inclusive fall fixtures and separate charges for minor T&P' s shall not be made)

code41 - Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to iO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead freewith gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame.Theframehaving overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)

code42 - Providing & fixing upvc ventilator with Exhaust Turbo speed fan with 5 blades(300mmx300mm & above sized fan) with copper motor having mounting arrangements as per direction of Engineer in chargeof work

code43 - Providing and fixing 600x450mm bevelededge mirror of superior glass (of approved quality) complete with 6mm thick hardboard ground fixed to wooden cleats with C.P. brass screws and washers complete.