Visvesvaraya Jala Nigam Limited Tender

KSRB 4-1.2:Providing, laying, in position plain cement concrete of Mix 1:3:6 with OPC cement @ 220 kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.892 cum amd fine aggregtes @ 0.465 cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms.thick ,well compacted ,in foundation including cost of all materials,labour,HOM of machinery ,curing complete as per specifications including all lead lead and lift charges and as per the direction of Engineer incharge

Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum, fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-2016, with Superplastizer at 3 lts conforming to IS 9103-2008. mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). & Spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continuous operation including provision of contraction, expansion, construction and longitudinal joints,including groove cutting charges, joint filler, separation membrane of impermiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries,all lead & lift charges etc., complete as per specifications with OPC at 360 kg/cum and coarse aggregate 0.69cum, fine aggregate 0.46cum. including all lead lead and lift charges and as per the direction of Engineer incharge

Box Drain: providing and laying plain/reinforced cement concrete for side Drains Walls & bottom thickness 10cm using M20 nominal mix concrete with OPC at 300kgs. with 20mm and down size granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43cum machine mixed, well compacted for walls and bottom including centering, shuttering, cost of materials, HOM of machinary curing etc., complete excluding cost of steel as per MORTH specification No. 1500, 1700,2200. including cost of materials, labour, HOM complete as per specifications

KSRB 4.2.2: Providing and lying in the position Plain/Reinforced cement concrete M20 for sub-structure / Superstructure works, with cement @ 320kgs, 20mm & downsize graded granite metal coarse aggregate @0.69 cum and fine aggregates @ 0.46cum machine mixed with super plasticisers @ 3 Its confirming to IS 9103-2008, concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc., including cost of labur, HOM curing etc., complete per specifications including all lead lead and lift charges and as per the direction of Engineer incharge

KSRRB M2300 -1.1. Providing and placing reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification complete as per specifications. A. RCC with OPC cement design mix M20 @ 320 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregates @ 0.46cum,with superplastisizer @ 3lts confirming to IS 9103-1999 Reaffirmed -2008 .Case-I: Using concrete Mixer MORTH Specification No. 1500,1600 & 1700 - For Height upto 5m including all lead lead and lift charges and as per the direction of Engineer incharge

KSRRB M2200-6:Providing TMT Bars Fe 500 steel reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (Laps, hooks and wastage shall not be measured and paid) cost of materials, labour,, HOM complete as per specification including all lead lead and lift charges and as per the direction of Engineer incharge

KSRRB M2200-6:Providing TMT Bars Fe 500 steel reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (Laps, hooks and wastage shall not be measured and paid) cost of materials, labour,, HOM complete as per specification and as per the direction of Engineer incharge. MORTH Specification No. 1600 & 2200 including all lead lead and lift charges and as per the direction of Engineer incharge

KSRRB M300-55, construction of embankment with approved matterial deposited at site from roadway cutting and excavation from drain and foundation of other structure graded and compacted to meet requirement of Table 300-2 complete as per specifications Which includes, watering charges & compaction by vibratory roller and as per the direction of Engineer incharge. MORTH Specification No. 305 including all lead lead and lift charges and as per the direction of Engineer incharge

Providing and fixing RCC name board of size 1.35Xk0.60X0.04 mtrs fixed in reinforced cement concrete poles of 0.10X0.10X2.60 mtrs in cement cocrete M 20 proportion using 20mm and down size graded metal machine mixed with 10mm dia main steel bars and 8mm dia stirrups as shown in the diagram. The board shall be provided with 12mm thick cement plaster in cement mortor 1:3 on both the sides. The poles shall be embedded in the ground for a depth of 0.50 mtrs with cement concrete M 10 proportion. The board shall be fixed as per the drawing and at the place indicated by the Engineering charge of the work. The cost includes excavation, cost of all materials, cost of steel, centering, transportation charges, fixing charges etc., The work shall be carried out as per the detailed specification, drawings and directions of the Enginner in charge of the work. including all lead lead and lift charges and as per the direction of Engineer incharge

KSRRB M800-6 Painting two coats on New Concrete Surface Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces complete as per specifications. MORTH Specification No.803 including all lead lead and lift charges and as per the direction of Engineer incharge