Visvesvaraya Jala Nigam Limited Tender

Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at 2m. apart in each course including cost of materials, labour, curing complete as per specifications with all lead and lifts as per the directions of engineer in charge.

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications with all lead and lifts as per the directions of engineer in charge.

Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specifications with all lead and lifts as per the directions of engineer in charge.

Refilling available earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5 m. including cost of all labour complete as per specifications. with all lead and lifts as per the directions of engineer in charge.

Providing and laying in position reinforced cement concrete of Design Mix M25 with OPC @ 340kgs, with 20mm anddown size graded granite metal coarse aggregates @0.70 cum and fine aggregtes @ 0.47cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008 at machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement as per specifications with all lead and lifts as per the directions of engineer in charge.

Providing and constructing load bearing wall with solid concrete blocks of size 400x200x200mm having block density not less than 1800kg/m3 having a minimum average compressive strength of 5.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005nincluding cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc., complete as per specifications with all lead and lifts as per the directions of engineer in charge.

Providing 12mm thick cement plaster in single coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. with all lead and lifts as per the directions of engineer in charge.

Providing and fixing hydraulic door closures-with mounting heavy duty. including cost of materials, labour, HOM complete as per specifications. with all lead and lifts as per the directions of engineer in charge.

Providing and fixing Veneer paneling, over the 50mm x 35mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the wall and top covered out of 4mm thick approved quality Veneer, fixed over 12mm thick ply of approved brand, termite and water resistant, finished with melamine polish, complete including cost and conveyance of all materials, labour for all items of work HOM etc., complete as per specification. with all lead and lifts as per the directions of engineer in charge.

Meeting table -wooden : Providing and fixing meeting table consisting of 25 mm thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge,1500 mm Dia X900 mm D X 750 mm Ht (6 seater) with all lead and lifts as per the directions of engineer in charge.

Meeting table -wooden : Providing and fixing meeting table consisting of 25 mm thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge,2400 mm Dia X1200 mm D X 750 mm Ht (12 seater) with all lead and lifts as per the directions of engineer in charge.

Providing and layingheavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and HOM complete as per specification with all lead and lifts as per the directions of engineer in charge.

Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses. with all lead and lifts as per the directions of engineer in charge.

Providing , fabricating, assembling and fixing in position aluminium partition using 101.60mm x 44.45mm x 3.18mm aluminium, mat finish or glossy finish , anodized sections combination of plain, single groove and double groove members should not exceed 0.60mc/c and bottom member of required lengths, joints mitred and corner grinded sub dividing assembled frame should be stiffened with corner angles. Stripped and fixed with screws rawl plug and teakwood guttas to RCC column or masonry on sides. RCC lintels or beams at top and mosaic floor at bottom; including cutting chistelling and making good with cement mortar to match the surface .Providing and fixing 12mm. thick prelaminated sheet (Ecoboard – exterior grade) of approved colour for bottom panel of maximum height 0.9m, and 5.50 mm thick plain or pin headed glass for middle panel and top panel with glazing clips pf 19.05mm.x17.30mm.1.00mm. All the aluminium sections used should be treated for removal of any rust and prevention of further rust formation and coated with greasy materials for non adherence of mortar or any other sticky materials: The vertical members should be embedded in the flooring by making suitable size holes and fixing with cement mortar. All the frame should be thoroughly cleaned free from rust, scale or dirt. work should be carried out as per direction of engineer-in-charge of the work with all lead and lift as per chief Architect’s drawing etc., complete to a degree of perfection. with all lead and lifts as per the directions of engineer in charge.

Providing & Fixing Mosquito mesh shutters made out of Stainless Steel mosquito proof mesh with 95% & above visibility which is fixed to the powder coated aluminium frame 32mm thick of approved shade. The work including fixing the shutters with necessary accessories, to complete as per specification including the labour charges for fixing the shutter to the existing frames. with all lead and lifts as per the directions of engineer in charge.

G.I. Barbed Wire Fencing 1.8 Metre High:- Providing and fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in M-15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 800.7 as per specifications. (Excluding the cost of excavation for foundation and foundation concrete) with all lead and lifts as per the directions of engineer in charge.

Providing and fixing pre cast solid concrete kerb stones of size 450x200x400 mm made out of CC 1:2:4 and finished with CM 1:3 plastering and finishing cutting ete., complete. with all lead and lifts as per the directions of engineer in charge.

Providing and fixing M.S. Hand railing for Balcony/Staircase etc., with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm M.S. square rod placed vertically, spaced at 100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced at equal interval. These assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. All the joints and sections hould be cut to length, welded and grinded wherever necessary etc., complete . The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and drawing. with all lead and lifts as per the directions of engineer in charge.

Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside & outside locking with push & pull operations complete including pulling hooks, 4Nos. handles with all fittings and accessories, painted with a coat of red lead paint (without top cover) cost of materials, labour, HOM of machinery complete as per specifications. Shutter size 3mx2.8 m. with all lead and lifts as per the directions of engineer in charge.

Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting , materials, labour, HOM of machinery complete as per specifications with all lead and lifts as per the directions of engineer in charge.

Providing and constructing burnt brick masonry with approved quality of modular bricks of standard size of class designation 5.0Newton per sqmm (table moulded) with cement mortar 1:4 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications. with all lead and lifts as per the directions of engineer in charge.

Providing 18 mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding including cost of materials, labour, curing complete as per specifications. External plastering. with all lead and lifts as per the directions of engineer in charge.

Providing and finishing external walls in two coats with waterproof cement paint with primer of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from morter drops and other foreign matter cost of materials, labour, complete as per specifications. Outside Painting. with all lead and lifts as per the directions of engineer in charge.

Providing and fixing in position collapsible steel shutters with single or double leaf with vertical channel 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size, with top and bottom rails of T iron sections of 40x40x6 mm with 38mm dia steel pulleys complete with bolt and nuts, locking arrangements, stoppers, handles on both sides with 7.5cms openings at 10 cms. c to c applying a priming coat of red lead paint. cost of materials, labour, HOM complete as per specifications. size of gate 2.4mx1.4m with all lead and lifts as per the directions of engineer in charge.

Providing and laying in position reinforced cement concrete of design Mix M25 with OPC @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70cum and fine aggregtes @ 0.47cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns, lintles, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement as per specifications with all lead and lifts as per the directions of engineer in charge.

Planting and Maintaining of Flowering Plants and Shrubs - A) Planting flowring plants and shrubs in central verge with all lead and lifts as per the directions of engineer in charge.

Grassing with Doobs grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed complete as per specifications. In rows 7.5 cm apart in either direction. with all lead and lifts as per the directions of engineer in charge.

STONE AGGREGATE , 40mm nominal size, with all lead and lifts as per the directions of engineer in charge.

STONE AGGREGATE 20mm nominal size, with all lead and lifts as per the directions of engineer in charge.

Sand/Artificial Sand/Manufactured Sand, with all lead and lifts as per the directions of engineer in charge.

110mm outer dia 2 kg/sqcm pressure pipe of approved make (PVC), with all lead and lifts as per the directions of engineer in charge.

Providing, laying, spreading and compacting cushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density completewith all lead and lifts as per the directions of engineer in charge.

Providing and Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with opc cement, coarse aggregates at 0.69 cum, fine aggregtes at 0.46 cum, coarse aggregates and fine aggregte confirming to IS:383-2016 with superplastisiser at 3lts confirming to IS9103-2008, mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). Spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints including groove cutting charges, joint filler, separation membrane of impermiable plastic of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of material labour, hire charges of machineries, all lead & lift charges etc., complete as per specifications. -do- with OPC Cement at 360Kg/cum coarse aggregate 0.69cum and fine aggregate 0.46cum with all lead and lifts as per the directions of engineer in charge.

Eureka RO Water Purifier (Aquaguard) (Aquaguard Hot and Cold RO) as per IS 14724 (latest) for water purification system with Ultraviolet disinfection. with all lead and lifts as per the directions of engineer in charge.

HP Desktop (hp) (HP 280 G3 Desktop I5) Processor : Intel Core i5-7500 (3.4 GHz, 6 MB Cache, 4 Cores) , Monitor size 19.5 inches, As per GEM Government e Marketplace rate. with all lead and lifts as per the directions of engineer in charge.

All in one Printer (hp) (hp laserjet M128fn) Printing Technology : laser, Cartridge Technology : composite, Type of Printing : mono, As per GEM Government e Marketplace rate. with all lead and lifts as per the directions of engineer in charge.

Inverter with sine wave, PRO UPS 2250 WITH TWO BATTERY (LUMINIOUS) (PRO UPS 2250 WITH TWO BATTERY) Energy 3 star , Type of Battery : Tubular Battery Confirming to IS 13369, Inverter Governing Specification: Generally Conforming to IS 13314, As per GEM Government e Marketplace rate. with all lead and lifts as per the directions of engineer in charge.

Vistors Chair (NA) (CWC012) Chair Type : with arms, Type of Seat and Backrest : Padded with Polyurethane Foam, Frame Type : 4 Legs, Size of material (mm) : 2 mm thick 25 mm Tube, Chair Height :950 mm, Seat Depth : 450 mm, Seat width : 450 mm, Seat Height : 460 mm, Back rest width : 450mm, backrest height : 450 mm, arm Length : 400mm, arm Width : 40mm, As per GEM Government e Marketplace rate. with all lead and lifts as per the directions of engineer in charge.

Godrej Almirah (Steel) (SIDDHGIRI)(2018) Material : M.S sheet conforming to commercial quality CR-1, Grade 340 of IS 513: 2008 (reaffirmed 2013) (Fifth Revision) Amdt. no. 1, Height (without Pedestal)(in mm): 1000, width :760 mm, Depth: 430mm, Inside Height Of Locker :290mm, Inside Width of Locker :380mm, Inside Depth of Locker :430.00 mm, Width of Stffner :115.00mm, Thickness of M S Sheet : 0.60mm, Stiffened Pedestal Height : 120mm, Pedestal width : 70mm, Finish : Synthetic Enamel, As per GEM Government e Marketplace rate. with all lead and lifts as per the directions of engineer in charge.

File RACK (SUPEREQ) (COVERED RACK ) Material : 0.8MM Thick MS Sheet conforming to commercial quality CR-1, Grade 340 of IS 513, Depth: 380mm, Width :900mm, Height : 1830mm, As per GEM Government e Marketplace rate. with all lead and lifts as per the directions of engineer in charge.

Supply and fixing of Ricoh Aficio MP 2501L Digital Multi fuction Device with copy/print speed 25ppm, 250 sheet Two paper trays with Duplex & 100 sheets By pass Tray , Zoom 50-200% with Combine copies and Electronic Sorting , Image Rotation, ID card copy, Resolution 600 dpi , A3 size color scanning available , RAM 128 MB. with all lead and lifts as per the directions of enginer incharge.