Visvesvaraya Jala Nigam Limited Tender

Box Drain: Providing and laying plain/reinforced cement concrete for Side Drains using M20 nominal mix concrete with OPC cement at 300 kgs with 20mm and down size granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.69 Cum and fine aggregates at 0.43 cum machine mixed well compacted for walls and bottom including centering shuttering, cost of materials, HOM of machinery, curing etc., complete excluding cost of steel as per MORTH specification No.1500, 1700, 2200. Wall and bottom thickness 10cm including all lead and lifts and complete as per direction of Eingineer In charge

KSRB 4.2.2: Providing and lying in position reinforced cemenet concrete of design mix M20 with OPC cement @320 kgs, with 20mm and down size graded granite metal coarse aggergates @ 0.69 cum and fine aggegates @ 0.460 cum, with superplastisiser @ 3lts confirming to IS 9103 -1999 Reaffirmed-2008, mechine mixed, concrete laid in layer not exceeding 15 cms thick, vibrated for all works in foundation for footing, pedastals, Retaining walls, Return Walls, Walls (any Thickness) including attached pilasters, columnspillers, posts, structs, Buttresses, bed blocks, anchor blocks and plinths etc., including cost of all materials, lobours, HOM of mechineries, curing, complete but excluding cost of reinforcement as per specification. Specification No. KBS 4.1, 4.6 including all lead and lifts and complete as per direction of Eingineer In charge

KSRRB M2300 -1.1. Furnishing and placing reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification comlete as per specifications. A. RCC with OPC cement design mix M20 @ 320 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregates @ 0.46cum,with superplastisizer @ 3lts confirming to IS 9103-1999 Reaffirmed -2008 .Case-I: Using concrete Mixer MORTH Specification No. 1500,1600 & 1700 - For Height upto 5m including all lead and lifts and complete as per direction of Eingineer In charge

KSRRB M2200-6:Supplying,fitting and placing TMT bar reinforcement in sub-structure complete as per drawing and techanical specification complete as per specifiaction MORTH specification No.1600 & 2200. (TMT Bars Fe 500) including all lead and lifts and complete as per direction of Eingineer In charge

KSRRB M2300-14 Providing TMT bar reinforcement for RCC work including straightening cutting bending hooking placeing in position lapping and / or welding where ever required tie with bing wire and anchoring to adjoining members where ever nessary complete as per design (Laps, hooks and wastage shall not be measured and paid ) includeing cost of material , labour , HOM complete as per the specifications MORTH Specification No. 1600 and 2200 TMT bar Fe 500 including all lead and lifts and complete as per direction of Eingineer In charge

KSRB 4-1.6 ; Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM curing complete as per specifications. Specification No. KBS 4.1, 4.2 including all lead and lifts and complete as per direction of Eingineer In charge

Supplying and fixing M.S. Rectangular poles made out of 2 equal angles of 65x65x6 mm welded together and fixed in CC (1:2:4) WITH 2 NOS 16mm dia M.S. hold fast rods each of length 25 cms. Including cost of all materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all lead lifts and as per the directions of the Engineer-in - charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting ( excluding cost of earthwork and concrete) including cost of materials, labour, HOM complete as per specifications.including all lead and lifts and complete as per direction of Eingineer In charge

Providing and fixing M.S. Block pipe of 38mm dia, of heavy guage of 14 including removing the bends, cutting the pipe, and fixing pipe in between the existing two verticle poles (M.S. rectangular poles) and spot welding the chain link with M.S. block pipe including cost of all materials wastage in cutting, and scaffolding wherever necessary with all lead and lift as directed by the Engineer-in-charge of work etc., complete including two coats of approved quality paint over one coat of shop paint, including cost of materials, labour, HOM complete as per specifications.including all lead and lifts and complete as per direction of Eingineer In charge

Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts and as per the directions of the Engineer-in-charge of work including two coats of approved quality paint over one coat of shop paint, including cost of materials, labour, HOM complete as per specificationsincluding all lead and lifts and complete as per direction of Eingineer In charge

Providing barbed GI wire fencing of 12x12 gauge drawn into stone pillars or iron pillars including drawing in holes wherever necessary excluding the cost of pillars but including the cost of barbed wire and binding wire etc., including cost of materials, labour, HOM complete as per specificationsincluding all lead and lifts and complete as per direction of Eingineer In charge

KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications, including cost of earth, watering charges & compaction by vibratory roller to 97% of modified proctors density) MORTH Specification No. 305(including all lead and lifts and complete as per direction of Eingineer In charge

KSRB 14.6-2 : Providing and laying heavy duty cobble stones interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum ompressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and HOM complete as per specifications. Specification No. KBS(including all lead and lifts and complete as per direction of Eingineer In charge

Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4 and finished with CM 1:3 plastering and finishing cutting etc., complete.of size 450 x 150 x 500 mm including all lead and lifts and complete as per direction of Eingineer In charge

Providing and Fixing Spiral stair case to CE's SE's and EE's quarters including all lead and lifts and complete as per direction of Eingineer In charge

Providing and fixing of pre pigmented extruded orange cement roof tiles of size 420mm x 330mm with necessary specials such as Ridges, Barges and Nails etc. including cast of providing PVC (6.00kgs/sq cm) gutters of min 6” radius and down water pipes of 4” dia as per the roof design on EXISTING MS/WOODEN ROOF or TRUSS. Including cost of materials, scaffoldings, labour etc., compelte as per specifications.including all lead and lifts and complete as per direction of Eingineer In charge

Fabrication supplying and erecting M.S. tubular trusses of all spans as per approved drawing & design with prefabricated steel applications using quality material and are durable, reliable and corrosion and abrasion resistant. Welding shall confirm to latest structural welding code. Quality shall be on various parameters like shape, size, design gauge and polish. The entire trusses is anchored in RCC column by using 4 nos of M.S. anchor bolts at each support with 10mm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S. pipes and welding wherever necessary and applying one coat of redoxide primer coat to all the members including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, letc., complete as per specification including all lead and lifts and complete as per direction of Eingineer In charge