Visvesvaraya Jala Nigam Limited Tender

KSRRB 300-58 Compaction of original ground by mechanical means including filling in deppression occuring during rolling including cost of all labour, HOM complete as per specifications. MORTH/ Chapter 3 (P.W.D. SR Shimoga Circle 2018-19 , Page No.147, Item No.19.64) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

Construction of granular sub-base Grading-V as Sub-base and drainage layer by providing course graded crushed stone aggregates of granite/ grap/basalt material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the 98% proctor density, complete as per specifications. (P.W.D. SR Shimoga Circle, 2018-19 Page No.153, Item No.20.4) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

KSRRB M600-1. Providing and Constructing of dry lean cement concrete mix CC 1:5:10 @base with OPC 25mm and down size graded granite metal coarse aggregate at 0.86 cum and fine aggregates @ 0.58 cum over a prepared Sub-base coarse and fine aggregate comforming to IS: 383, -2016 aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per Table 600-1, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver, compacting with 8-10 tonnes vibratory roller, finishing and curing complete as per specifications. with OPC at 150 kg/cum and coarse aggregate 0.86 cum, fine aggregate 0.58 cum using concrete batch mix plant at 75 cum/hr capacity with fixed form paver. (P.W.D. SR Shimoga Circle, 2018-19 Page No.174, Item No.22.1.2) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

Constructing of un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum, fine aggregates @ 0.46 cum, coarse and fine aggregate comnforming to IS:383-2016 with superplastizer at 3 lts conforming to IS-9103-2008.mixed in a concrete mixer of not less than 0.6cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel laying and fixing of 125 micron polythene film, wedges, steel plates including levelling the form work as per drawing). & spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continuous operation including , provision of contraction, expansion, construction and longitudinal joints, including groove cutting charges, joint filler, separation membrane of impermiable plastic sheet of 125 micron, sealant primer joint sealent, admixtures as approved, curing compund, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour, hire charges of machineries all lead & lift charges etc., complete as per specifications. with OPC at 360 kg/cum and coarse aggregate 0.69 cum, fine aggregate 0.46 cum, (P.W.D. SR Shimoga Circle, 2018-19 Page No.176, Item No.22.6.1) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing HOM complete as per specifications. Specifications No. KSRB 1000, 2300 MOST Specification No. 1000 / 2300 for 300mm dia (P.W.D. SR Shimoga Circle, 2018-19 Page No.254, Item No.34.6.1) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

KSRB 12-8.1 : Constructing brick masonry inspection chamber for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I. cover withframe (light duty) internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg), R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. for 450x450mm and 450mm depth(clear inside dimension) for single pipe line, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5 C.I cover with frame (light duty) 450x450 mm. (P.W.D. SR Shimoga Circle, 2018-19 Page No.76, Item No.11.50.3) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

KSRRB M800-13. Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface / Concrete surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. standards specified the finished surface to be level, uniform and free from streaks and holes complete as per specifications. MORTH Specification No.803 (P.W.D. SR Shimoga Circle, 2018-19 Page No.182, Item No.24.15) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

KSRRB M800-35. Supply and Installation of Moulded Shank Raised Pavement Markers made of polycarbonate and ABS(Acrylonitrile Butadience Styrene) moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97-DO III Dt 11.06.1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 mm and height not less than 30 mm) from the body is to be a minimum value of 500 kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. (P.W.D. SR Shimoga Circle, 2018-19 Page No.187, Item No.24.41) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

KSRB-4-1.3 : Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.85cum and fine aggregates @ 0.57cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost all materials, labour, HOM, curing complete as per specifications. specification No. KBS 4.1,4.2 (P.W.D. SR Shimoga Circle, 2018-19 Page No.13, Item No.4.3) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

KSRB 4.9.2: Providing T.M.T. steel reinforcement for R.C.C. work including straightening cutting, bending, hooking, placing in position, lapping and (or welding wherever required, trying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specifications. Specification NO. KBS-4.6.3 (P.W.D. SR Shimoga Circle, 2018-19 Page No.18, Item No.4.46.2) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

Providing and laying plain/reinforced cement concrete for Side Drain using M-20 Nominal Mix concrete with OPC at 300 Kgs with 20mm and down size granite metal coarse aggregate at 0.69 Cum and fine aggregates 0.43 Cum machine mixed well compacted for walls and bottom including centering , Shuttering, Cost of materials, HOM machinery, Curing etc., complete excluding cost of steel as per MORTH specification No. 1500, 1700, 2200. including cost of materials , labour , HOM complete as per specification for Wall and Bottom thickness 15 cm. (P.W.D. SR Shimoga Circle, 2018-19 Page No.271, Item No.37.59.2) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

KSRRB M400-18. Construction of Median and island above road level with approved material deposited at site from roadway, cutting and excavation for drain foundation of other structures, spread, graded and compacted as per Clause 400.7 complete as per specifications. MORTH Specification No.407 (P.W.D. SR Shimoga Circle, 2018-19 Page No.155, Item No.20.19) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work

KSRB 4-6.4: Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specifications. SpecificationNo. KBS 4.6.2 (P.W.D. SR Shimoga Circle, 2018-19 Page No.16, Item No.4.31) ---- All the items in the tender include all lead lifts, labour, loading unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of engineer-in-charge of this work