Visvesvaraya Jala Nigam Limited Tender

KSRRB M300-59.2 Loosening,levelling and compacting original ground supporting embankment to fecilitate placement of first layer of embankment/sub grade,scarified to a depth of 150 mm,mixed with water at OMC and then compacted by rolloing so as to achive minimum dry density as given in table 300-2 for embankment/subgrade including HOM construction,labour etc.,complete as per specifications. MORTH specification No 305.3.4Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB M300-53: Construction of embankment with approved material gravel/murrum with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement table 300-2 complete as per specifications, including cost of gravel/murrum, watering charges & compaction by vibratory roller to 95% of proctors density. Morth specification No.305 Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity garde sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick with area not exceeding 0.90sqm supported on a mild steel single angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed founadtion with M15 garde cement concrete 45x45x60 cm, 60cm below ground level as per approved drawing. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB M300-52.1.Scarifying the existing grannular road surface to a depth of 50 mm and disposal of scarified material and complete as per specification MORTH Specification No 305.4.3 Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB M300.52.2 : Scarifying the existing Bituminus surface to a depth of 50mm by mechanical means scarifying the existing bituminus road surface to a deptt of 50mm and disposal of scarified material and complete as per specification MORTH Specification No. 305.4.3 Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB M400-14.1 Providing, laying, spreading and compacting crushed stone aggregates of granite/trap/basalt of specific sizes to water bound macadam specifications including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregates, watering and compacting to the required density complete as per specification. A. By mannual means. Morth specification No.404 Crushable type such as Moorum or Gravel for Grading-II. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB M400-14.1 Providing, laying, spreading and compacting crushed stone aggregates of granite/trap/basalt of specific sizes to water bound macadam specifications including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregates, watering and compacting to the required density complete as per specification. A. By mannual means. Morth specification No.404 Type B 11.2mm Grading-III. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB M500-6 Providing and applying priming coat with S.S.bitumen emulsion on prepared surface of granular base such as WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means complete as per specifications clause 502 of MORTH V revision Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB 500-7 Providing and applying tack coat using 80/100 grade bitumen (VG10) on the prepared black topped surfaces at 2.5 kg per 10 sqm, heating bitumen in boiler fitted with spray set (excluding cleaning of road surface) including cost of all materials, labour, HOM of machineries complete as per specificationsclause 503 of MORTH V revision Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB 500-27. Providing and laying open graded premix carpet of 20mm thick on prepared surface in a single course as wearing course composed of 11.2mm and 13.2mm size stone aggregates 0.027 cum/sqm premixed with bituminous binder at 1.46kg/sqm in mini hot mix plant 6-10 tonne capacity laying manually and rolling with power roller 8-10 tonne, excluding cost of tackcoat, including cost of all materials, labour, HOM of machineries complete as per specifications using VG10 (80/100) grade. Clause 510 of MORTH V revision. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB M500-39.1 and 39.2. Providing and laying seal coat for sealing the voids on bituminous surface, laid to the specified levels, grade and cross fall manually and rolling with power roller 8-10 tonne capacity including cost of all materials, labour, HOM of machinery complete as per specifications.CLause 511 of MORTH V revision TYPE_B using graded aggregates 2.36mm and downsize at 0.006 cum/sqm with bitumen binder VG-10 (80/100 grade) at 0.68 Kg/sqm. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

Patching of deep potholes by restoring the granular base coarse using material confirming to WBM garde -III standards /WMM wherver necessary by manual means including trimming the pothole to the required shape and size, cleaning the pothole applying tack coat at 4 kg/10sqm over the WBM/WMM surface including cleaning etc, and covering the surface with premixed mix seal TYPE-A 20mm thick including lead, loading unloading, rolling and finishing etc., including cost of materaial, labour, HOM Complete as per standard specification. complete as per standard specfication. upto 75mm Thick. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB M2900-1. Plan cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing and cost of materials,labour,HOM complete as per specifications. MORTH Specification No.408Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB M2200-6. Providing T.M.T. steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification. MORTH Specification No.1600 & 2200. TMT bars Fe 500.Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

Providing and laying plain/reinforced cement concrete for side drains using M20 nominal mix concrete with OPC at 300 kgs, with 20 mm and downsize granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum machine mixed, well compacted for walls and bottom including centering shuttering, cost of materials, HOM of machinery, cufing etc., complete excluding cost of steel as per MORTH specification No 1500,1700,2200 including cost of materials, labour, HOM complete as per specifications.wall & bottom thickness 10cm. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRRB M400-17 Providing laying spreading and compacting cushed stone aggregrates of granite/trap/basalt to wet mix macadam specification including pre mixing the material with water at OMC in Mechanical mix plant carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base /base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH sepcification No.406. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum, fine aggregates at 0.46 cum, Coarse and fine aggregate conforming to IS : 383-2016, with Superplastizer at 3 its conforming to IS 9103-2008. mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing) & spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continous operation including provision of contraction, expansion, construction and longitudinal joints, including groove cutting charges, joint filler, separation membrane of impermiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine and curing including cost of all materials, labour hire charges of machineries all lead & lift charges etc., complete as per specifications with OPC at 360 kg/cum and coarse aggregate 0.69 cum, fine aggregate 0.46 cum.Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

Earth work in excavation of foundation of structures like culverts, retaining walls etc., as per drawing and technical specification, including setting out, construction of shoring and bracing, dressing of sides and bottom, backfilling with the approved material, disposal of balance earth as per specification including cost of labour , HOM etc.,complete. i) All kinds of soil by Mechanical Means. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

Providing and laying in position reinforced cement concrete M20 for sub structure/super structure works with cement @ 320 kgs, 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, machine mixed with super plasticisers @ 3 liters confirming to is 9103-2008 concrete laid in layers well compacted and providing wheep holes wherever necessary with necessary scaffolding form work etc.,including cost of labour,HOM curing etc., Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing including cost of materials,labour,HOM complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 600mm. dia. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

KSRB 2-4 : Refilling available earth arround pipe lines, cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with lead upto 50 m.And lift upto 1.50m.Including cost of all labour complete as per specifications. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.

Supplying and fixing in position new guard stones of granite/trap/sand stone/shahabad roughly dressed, of size 700mm x 200mm x 200mm including excavation, painting with white and black paint 15cm wide strip alternatively etc., complete. Complete with all lead and lifts as directed by Engineer-in-charge ---- A valid copy of the KPWD Class I or VJNL/KNNL category III and above categorization certificate.