Visvesvaraya Jala Nigam Limited Tender

Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum, fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-2016, with Superplastizer at 3 lts conforming to IS 9103-2008. mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). & Spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continuous operation including provision of contraction, expansion, construction and longitudinal joints,including groove cutting charges, joint filler, separation membrane of impermiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries,all lead & lift charges etc., complete as per specifications. with OPC at 360 kg/cum and coarse aggregate 0.69cum, fine aggregate 0.46cum. (I.No. 22.6.1,P.No. 176 of PWD SR 2018-19, Hasan Circle ) As per the direction of engineer incharge.

Providing laying plain / reinforced cement concrete for Side drains using M20 nominal mix concrete with OPC cement at 300 Kgs. with 20 mm and downsize granite metal coarse aggregates at 0.69 cum and fine aggregates atb 0.43 cum machine mixed, well compacted for walls and bottom including centering, shuttering, cost of materials, HOM of machinery, curing etc., complete excluding cost of steel as per MORTH Specification No. 1500,1700,2200, walls and bottom thickness 10 cms. (I.No. 37.59.1,P.No. 271 of PWD SR 2018-19, Hasan Circle ) As per the direction of engineer incharge.

KSRRB M2200-6. Providing T.M.T. steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position,lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification.MORTH Specification No.1600 & 2200 TMT Bars Fe 500. (I.No. 28.8.2,P.No. 229 of PWD SR 2018-19, Hasan Circle ) As per the direction of engineer incharge.

Providing and fixing RCC name board of size 1.35xk0.60x0.04 mtrs fixed in reinforced cement concrete poles of size 0.10x0.10x2.60mtrs in cement concrete M 20 proportion using 20mm and down size graded metal machine mixed with 10mm dia main steel bars and 8mm dia stirpes as shown in drawing. The board shall be provided with 12mm thick cement plaster in cement mortar 1:3 on both the sides. The poles shall be embedded in the ground for a depth of 0.5 mtrs with cement concrete M 10 proportion. The board shall be fixed as per the drawing and at the place indicated by the Engineering charge of the work. The cost includes excavation, cost of all materials, cost of steel, centering, transportation charges, fixing charges etc., The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. (I.No. 37.6,P.No. 271 of PWD SR 2018-19, Hasan Circle ) As per the direction of engineer incharge.

KSRRB M800-6. Painting two coats on New Concrete Surface: Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces complete as per specifications. MORTH Specification No. 803 (I.No. 24.7,P.No. 181 of PWD SR 2018-19, Hasan Circle ) As per the direction of engineer incharge.

KSRRB M800-10. Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English and Roman - Hyphen and the like not to be measured and paid for “ MORTH Specification No.801 (I.No. 24.10,P.No. 181 of PWD SR 2018-19, Hasan Circle ) As per the direction of engineer incharge.