Visvesvaraya Jala Nigam Limited Tender

Vol-3 Roads & Bridges SR 2023-24, P-149, I-16.28 - Providing and constructing un-reinforced cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labor, equipment's etc., complete. as per the directions of the Engineer-in-charge of the work. PWD Vol-3 Roads & Bridges SR 2023-24, P-149, I-16.28

Volume-1 COMMON SR 2023-24, P-15, Item No 2.1.3 - Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with laid in layers not exceeding 150mm thickness, well compacted using Plate vibrators, including all lead & lifts, cost of all materials of quality, labor, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specification. Mix 1:3:6 (M-10) using 40mm nominal size graded crushed coursed aggregates. Add lead & lift and as directed by the Engineer in Charge of the work(Volume-1PWD COMMON SR 2023-24, P-15, Item No 2.1.3)

PWD COMMON SR 2023-24, VOL-1 P-16, I-2.4.2 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Add lead & lift and as directed by the Engineer in Charge of the work PWD COMMON SR 2023-24, VOL-1, P-16, I-2.4.2 a) RCC box drain (Drain Bed)

PWD COMMON SR 2023-24,Vol-1, P-16, I-2.4.2 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labor, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Add lead & lift and as directed by the Engineer in Charge of the workPWD COMMON SR 2023-24, Vol-1 P-16, I-2.4.2 b) RCC box drain (Drain Wall)

PWD COMMON SR 2023-24,Vol-1, P-16, I-2.4.2 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labor, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Add lead & lift and as directed by the Engineer in Charge of the work PWD COMMON SR 2023-24,Vol-1, P-16, I-2.4.2 c) Deck slab

Volume-1 PWD COMMON SR 2023-24, P-18,SL No.2.11(h) - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labor, cleaning, straightening, cutting, bending, hooking, lapping/welding joints, tying with binding wire/soft annealed steel wire and other ancillary operations complete as per drawing and technical specification Add lead & lift and as directed by the Engineer in Charge of the work Volume-1, PWD COMMON SR 2023-24, P-18,SL No.2.11(h)

Volume-3 PWD COMMON SR 2023-24, P-79, I-No 8.55 - Providing and fixing RCC name board of size 1.35x0.60x0.04m fixed in reinforced cement concrete poles of size0.10x0.10x2.60m in cement concrete M 20 proportion using 20mm and down size graded metal machine mixed with10mm dia main steel bars and 8mm dia stirpes as shown in drawing. The board shall be provided with 12mm thick cement plaster in cement mortar 1:4 on both the sides. The poles shall be embedded in the ground for a depth of 0.5 m with cement concrete M 10 proportion. The board shall be fixed as per the drawing and at the place indicated by the Engineer in charge of the work. The cost includes excavation, cost of all materials, cost of steel, painting, centering, transportation charges & fixing charges.Add lead & lift and as directed by the Engineer in Charge of the work Volume-3, PWD COMMON SR 2023-24, P-79, I-No: 8.55