Visvesvaraya Jala Nigam Limited Tender

KSRRB 300 -58.Compaction of original ground by mechanical means including filling in depression occuring during rolling including cost of all labour, HOM complete as per specifications. MORTH/ chapter 3 including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

KSRRB M300-53. Construction of embankment with approved material Gravel/Murrum with all lifts snd leads, transporting to site, spreading, grading to required slope and compacting to meet requirement Table 300-2 complete as per specifications, including cost of gravel/murrum, watering charges and compaction by vibratory roller 95% of modified proctors density. MORTH Specification No.305 including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

KSRRB M2900-1 Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. MORTH Specification No.408 including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

KSRRB M400-17 Providing, laying, spreading and compacting cushed stone aggregates of granite / trap / basalt to Wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density . MORTH Specification No.406 including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

Construction of un-reinforced, plain cement concrete for pavement using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum, fine aggregrates at 0.46cum, Coarse and fine aggregate conforming to IS: 383-2016, with Superplastizer at 3 Its conforming to IS 9103-2008. mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design ,laid in approved fixed side form work (steel, channel ,laying and fixing of 125 micron thick polthene film, wedges,steel plates including levelling the form work as per drawing). & spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters i a continuous operation including provision of contraction, expansion, construction and longitudinal joints, including of groove cutting charges, joint filler, separation membrane, of impermiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound ,finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour, hire charges of machineries, all lead & lift charges etc., complete as per specifications. including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

Providing and laying plain/reinforced cement concrete for Side Drains using M20 nominal mix concrete with OPC at 300 kgs. with 20mm and down size granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum machine mixed, well compacted for walls and bottom including centering, shuttering, cost of materials. HOM of machinery, curing etc., complete excluding cost of steel as per MORTH specification no 1500, 1700, 2200. including cost of materials, labour, HOM complete as per specifications. including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

Providing and laying in position plain cement concrete of mix 1:2:4 for sub-structure works like Culverts, retaining wall etc., with cement @ 240 kgs, 40mm & down size graded granite metal coarse aggregate @ 0.84 cum and fine aggregates @ 0.46 cum machine mixed, with necessary scaffolding, form worketc., including cost of labour, HOM curing etc., including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

KSRRB M2300-1-1. Providing and Placing Reinforced / Prestressed cement concrete in super structure as per drawing and Technical Specification complete as per specifications. A. RCC- with OPC desgin mix M20 @ 320 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregates @ 0.46 cum, with superplastisier @ 3lts confirming to IS9103-1999 Reaffirmed-2008. including cost of materials, labour, HOM, curing, form works, scaffolding and centering complete as per specifications.MORTH Specification No. 1500, 1600 & 1700, 1800, 2300 & IS 456 including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

KSRRB M2200-6. Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification MORTH Specification No. 1600 & 2200 including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

KSRRB M300-54, Construction of embankment with approved matterial deposited at site from Roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table No:300-2 complete as per specifications,which includes, watering charges and compaction by vibratory roller) MORTH Specification no 305 including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

Providing and fixing RCC name board of size 1.35xk0.60x0.04 mtrs fixed in reinforced cement concrete poles of size 0.10x0.10x2.60mtrs in cement concrete M 20 proportion using 20mm and down size graded metal machine mixed with 10mm dia main steel bars and 8mm dia stirups. The board shall be provided with 12mm thick cement plaster in cement mortar 1:3 on both the sides. The poles shall be embedded in the ground for a depth of 0.5 mtrs with cement concrete M 10 proportion. The board shall be fixed as per the drawing and at the place indicated by the Engineer incharge of the work. The cost includes excavation, bare cost of all materials, cost of steel, centering, transportation charges, fixing charges, labour, HOM etc., The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

KSRRB 300-48. Scarifying kankar/ gravel/ metal crust by mechanical means upto 150mm thick disposal of stuff including cost of all labour charges, HOM complete as per specifications. MORTH / Chapter 3 including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

KSRB 2.8 : Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift. Complete as per specifications. specification. No.KBS 2.10.2 including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work

Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials , labour, curing, including cost of materials, labour, HOM complete as per specifications. Specifications. No. KSRB 1000, 2300 MORTH Specification No.1000/2300 including all leads and lifts loading, unloading complete as per specifications and as per direction of engineer in charge of work