Urban Development Authority Tender

code04 - Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.

code05 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.

code06 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.

code07 - Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.

code08 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.

code09 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.

code10 - Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.

code11 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.

code12 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest mendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 50mm dia., 6 kg/sqcm & class 3 ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.

code13 - Providing and fixing gun metal non- return valve of approved quality (screwed end) : 80 mm nominal bore Vertical ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.

code14 - Painting steel work with Deluxe Multi surface paint to give an even shade. two coat applied @0.90ltr/10m² over an under coat of primer applied @0.80 ltr/10m² of approved brand andmanufacture including preparing the surface after throughly clraning oil, grease, dirt and foreign matter, cost of material, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.

code15 - Providing & fixing sadarahalli Granite benches with back rest using supporting plece 2 no of size (0.60 x 1.20 x 0.05) mtr Sadarahalli granite to cutting to required shape and sitting slab size (1.55 x 0.45 x 0.05) mtr and finlly back rest supporting the two plece on size (1.55 x 0.15 x 0.05) mtr including Grooves, Nousing, Chamfering, Design of cutting, Lining, Metal paste gum, Electrification chargers and smooth finishing complete, including cost of materials, labour, transporting charge, Complete as per specifiction (MUDA approved rate) ---- with all lead , lift, loading and unloading charges complete as per specification and as directed by the Engineer incharge of the work.