Urban Development Authority Tender

code04 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (P.no-86 I.no-11.34A Vol-II, PWD SR-2023-24) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code05 - Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete. (P.no-60 I.No-9.8 Vol-II, PWD SR-2023-24 ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code06 - Fabrication, providing and erecting in position Hot dip galvanised Gate using 72 x72 x4mm Sq. Gl Pipe frame with top pipe bending in heavy hydraulic press with sand packing and hot bending to form double arch as per drawing profile, 20mm hot dip galvanised Sq. rod for verticals at 150mm c/ c, as shown in the drawing including providing ho dip galvanised forged ornamental design in between sq. rods and heads at top, middle and bottom, Intermediate supports of 72x12mm and 50x6mm arch bent to hot dip galvanised flats the work is inclusive of troughing Gl flat Gl sq. rods, placing, welding all the joints including grinding, finishing metal patty, painting two coats enamel painting. The rate is inclusive of all materials like GI sq rods, Gl gorged designs etc., heavy duty hinges are made out of 75mm solid sq block assembled with 20mm dia bearing in three places for each flop. Heavy duty locking arrangements at two places including cost of labour, unloading, scaffolding charges and all other incidental charges for successful completion of the work as per directions of the engineer-in-charge of the work.(Data Rate) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code07 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge (PWD SR 2023-24, Vol-II, P. No.82, I. No. 11.16.2) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code08 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Pg No 47 item No 8.33.3 Vol-II, PWD SR-2023-24). ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code09 - Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel, bottom sheet of 0.40mm steel with powder coated finish. The precoated sheet shall be of minimum 240MPa steel conforming to IS 14246 : 1995 and shal have zinc coating with minimum 120gsm as per IS 277:1992,. The roofing system shall have suitable water proof over lapping arrangments and GRIHA ceritifed.The fasting shall be of self tapping screws of required length with PVC head along with washer pre-painted aluminium cap unit with build in seal arrangments. The entire roof shall be firmly fastened to the existng frame including all lead and lifts, loading & unloading ,usage charges of machinery and equipments, transportation charges,labour charges and all other incidental charges etc.,complete as per standard technical detailed specifications and as directed by the Engineer in charge of the work(PWD SR 2023-24, Vol-II, P. No.38, I. No. 7.67.2) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code10 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required (PWD SR 2023-24, Vol-II, P. No.26, I. No. 7.38) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code11 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(P.No 191 I,no 16.4 of Vol-5 BWSSB SR 2023-24) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code12 - Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top and bottom width 114 and 165mm respectively,400mm high and 450mm in length finished with CM 1:3 plastering and finishing cutting including formwork,curing including cost of materials,labour charges of machinery,loading and unloading,lead and lift,transportation etc., complete as directed by the Engineer in charge of the work (Data Rate) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code13 - Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)(P.No 59 It no. 9.6.1 of Vol-2 SR 2023-24) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code14 - Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer in charge)(P.No 64 It no. 9.32 of Vol-2 SR 2023-24) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code15 - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces.Painting Two Coats on New Concrete Surfaces.(I,No.8.1,Page No.66, Vol- III SR 2023-24) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code16 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications..(No.11.35.2.2,Page No.88,Vol- II SR 2023-24) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code17 - Supplying, erecting, testing & commissioning of ON- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 7.5 kVA ON LINE UPS ( I.No-9.3.4 P.No-38 ,PWD Ele SR 2-23-24) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code18 - Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. 200 AH capacity ( I.No-9.4.7 P.No-29 PWD Ele SR 2-23-24) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code19 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (Pg No-149, I.No-15.2, Vol-II PWD 2023-24) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code20 - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge.(Item No20.42,Page No.201, Vol 2 SR 23-24 ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.

code21 - Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge..(Item No.15.6, Page No.150, Vol- II SR 2023-24) ---- with all lead lift , loading and unloading charges complete as per specification and as per the direction of the Engineer incharge of the work.