Urban Development Authority Tender

code04 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 5.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

code05 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. 2.1.4 Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates

code06 - Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification. I.S. 3620/1979 having compressive strength not less then 3.5 N/mm2 for saturated dry samples For superstructures in CM 1:6

code07 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

code08 - Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge.

code09 - Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code10 - Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code11 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code12 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminarie sand mounted on Octagonal pole using necessary bolts, nuts etc., complete. 4.6.1Single Arm Bracket with 1000 mm Standard 40/50 mm dia

code13 - Supply of LED Streetlight luminaire with pressure die castaluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polycarbonate material, deliveringsuperior light output Rated life Burning Hrs 50000 hr @Lumen Maintenance of 70%, maximum light intensity shouldbe between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment impact resistance ofcomplete luminaire IK08. Power Factor 0.9 withmains, Surge Protection Min 5KV along with Over voltage Overload, short circuit miss-wiring protection. Compatiblefor pole mounting with outer dia of 40mm to 50mm. UniversalVoltage driver to operate wide voltage range from 100V to 270V50 60Hz application. Compliance to IS 10322 IEC 60598,LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease ofmaintenance at the sight site location with minimized minimaltools. LED Light fixture with W System Powerconsumption. LED Efficiency 1301m w, nominal CRI 75.Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certifiedagency & Design & Development facility certified by ISO9001:2008. Housing with supplier word mark /name shallbe Engraved / Embossing on the die cast housing/ Bodypart. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned 11.8.3 LED Streetlight 70W

code14 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS 694:2010 2C x 4 mm2

code15 - Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick

code16 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2

code17 - Supply of LED Bollard light fitting of W with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartmentcomprising of antiglare clear diffuser with Injection moulded polycarbonate clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment impact resistance of complete luminaire IK08.PowerFactor 0.9with mains, Surge Protection-Min5KV along with Over voltage/Overload, short circuit/miss-wiring protection.UniversalVoltagedriver to operate wide voltage range from 100V to 270V 50/60Hz application.Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB ,with 2years Warranty against any manufacturing defect working under standard electrical condition. 11.12.18W 0.5 m Height

code18 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. I - Single Door ,4 Way SP & N

code19 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP

code20 - Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 63 A 4 pole

code21 - Fuse Wire 52.04 Tinned Copper Fuse Wire, 100 Amps

code22 - GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg

code23 - Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

code24 - Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

code25 - Supplying and fixing Microprocess or based Electronic timer (without contactor ,Din Mounting using necessary bolts ,nuts and washers etc.,.) 3-120 sec setting

code26 - GI/Copper strips 12.58.2 25 x 3 mm GI strip

code27 - LT UG cable 2 core 10 sqmm

code28 - Fabricating,supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S355 JO stee lplate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelitesheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sfor .......m Pole in singlesection andsinglejointwelded as per IS 9595/IS10178AWShaving dimensions bottom ..... mm , top.... mm with3 mm thick,suitablebaseplate and 4Nos of ..... longJbolts alongwithtemplate and the Pole shall be hotdipgalvanized in singledipping withnotlessthan65micron as perASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 4 m - Top 70 mm and Bottom 130 mm dia

code29 - Fabricating,supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S355 JO stee lplate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelitesheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sfor .......m Pole in singlesection andsinglejointwelded as per IS 9595/IS10178AWShaving dimensions bottom ..... mm , top.... mm with3 mm thick,suitablebaseplate and 4Nos of ..... longJbolts alongwithtemplate and the Pole shall be hotdipgalvanized in singledipping withnotlessthan65micron as perASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 9 m - Top 70 mm and Bottom 155 mm dia

code30 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection Min 5KV along with Over voltage Overload, short circuit miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50 60Hz application. Compliance to IS 10322 IEC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Floodlight 100W