Urban Development Authority Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 94,200Document Cost
Refer DocumentsTender Fee
₹ 990
Summary
Estimate For Development Of Park Works In Sy.no.279, Kasba North Sathyamangala, Sai Layout Ward 23, Tumkuru City.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
TUDA/2024-25/OW/WORK_INDENT19Tender No
TUDA/2024-25/OW/WORK_INDENT19Tender Authority
Urban Development Authority ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
004 - Supplying, fitting and placing Mild Steel Reinforcement complete as per drawing and technical specification.
2.73
77398
211298.3145
... More
005 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members where ever necessary complete as per Design including cost of material, labor, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)
2407.68
92
222469.632
... More
006 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm da wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of da 4 mm)
213
709
151187.4
... More
007 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labor, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (21 KG/Sqm)
738.72
142
105489.216
... More
008 - Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labor, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete.
40
874
34986
... More
009 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. With approved color shade paint complete, on M.S. angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labor complete. Spec. No. As directed by Engineer in Charge & north specification 804
3
9450
28350
... More
010 - Clearing and grubbing land including uprooting rank vegetable grass, bushes, shrubs, saplings and trees up to 300mm girth by manual means, in areas of light jungle, removal of stumps, disposal of unserviceable materials, stacking of serviceable materials from road boundary etc. including cost of labor charges, all lead and lifts, etc. complete as directed by the Engineer in charge
1680
18
31752
... More
011 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such similar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift up to 1.5 m including cost of labor, tools & other accessories required to complete the work.
92.63
618
57287.0235
... More
012 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labor, rolling, water, all materials ,usage& all other accessories required to complete the work
537.75
422
226984.275
... More
013 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates
11.25
6527
73438.3125
... More
014 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labur, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6( M10) Using 20 mm nominal size graded crushed coarse aggregates
21.45
5632
120810.69
... More
015 - Providing and laying heavy duty cobble stones 60mm thickness interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape & color with a minimum compressive strength of 281 kg/m2 over 50mm thick sand bed ( avg. thickness) and compacting with plate vibrater having 3 tons compaction force there by forcing part of sand underneath to come up in b/w joints final compaction of paver surface joints into its final level including cost of materials, labor & usage charges of mechanism complete as per specification
432.5
1141
493633.875
... More
016 - Supplying and fixing M15 grade precast cement concrete curb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and complete in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) (300 x 300 x 150 mm curd Stone)
340
341
116025
... More
017 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after complete cleaning oil, grease, dirt and foreign matter, cost of materials, labor complete as per specifications and as per directions of Engineer-in-charge
119
111
13244.7
... More
018 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thin able priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labor complete as per specifications and as per directions of Engineer-in-charge.
119
110
13119.75
... More
019 - Providing and fixing cement benches with base back rest and pedestals of the size shape and design as shown in the drawing including transportation and with all lead lift loading and unloading earth work excavation and fixing compress per standard specification and erection of the engineer in charge complete as per standard technical detailed specification and design and directions of the Engineer in charge of the work.(Ornamental Cement benches Measurement -3.3 ft height, Width - 5 ft. (with paint)) Item No. 10/1 of RC approved by the Director of Horticulture , Bangalore.
18
9345
168210
... More
020 - Earthwork excavation by manual means for foundation of buildings, water supply and sanitary lines and electrical conduits ,either in pits or in trenches 1.5m and above in width, in soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead up to 50 m. including breaking of clods complete as per specifications. Ordinary soil as per
50.4
254
12806.64
... More
021 - Providing and Constructing dry lean cement concrete mix CC 1:5:10 base with OPC 25mm and down size graded granite metal coarse aggregate at 0.86cum and fine aggregates @0.58cum over a prepared sub-base, coarse and fine aggregate conforming to IS: 383-2016,aggregate cement ratio not to exceed 15:1, Aggregate gradation after blending to be as per Table 600-1,optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 at 7 days, mixed in a batching plant, transported to site, laid with a paver, compacting with 8-10 tonne vibratory roller, finishing and curing complete as per specifications. with OPC at 150 kg/cum and coarse aggregate 0.86cum, fine aggregate 0.58cum using Concrete Batch mix Plant at 75 cum/hour capacity with Slip form paver with electronic sensor
27.84
3764
104796.72
... More
022 - Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum, fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-2016, with Superplastizer at 3 lts conforming to IS 9103-2008. mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). & Spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, including groove cutting charges, joint filler, separation membrane of im permiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labor, hire charges of machineries, all lead & lift charges etc., complete as per specifications with OPC at 360 kg/cum and coarse aggregate 0.69cum, fine aggregate 0.46cum
27.84
7112
198017.568
... More
023 - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass
beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes.
22.8
556
12688.2
... More
024 - Supplying and fixing M.S. Rectangular poles made out of 2 equal angles of 65x65x6 mm welded together and fixed in CC (1:2:4) WITH 2 NOS 16mm dia M.S. hold fast rods each of length 25 cms. Including cost of all materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all lead lifts and as per the directions of the Engineer-in - charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting ( excluding cost of earthwork and concrete) including cost of materials, labor, HOM complete as per specifications.
12
901
10823.4
... More
025 - Fabricating, supplying and erection of . ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for . m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom . mm , top .mm with 3 mm thick, suitable base plate and 4Nos of.long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and153 etc.,(excluding foundation) as per drawing appended.4.4.3 5 m - Top 75 mm and Bottom 125 mm dia
20
10815
216300
... More
026 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine ggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates
1
6222
6222.3
... More
027 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
8
6599
52794
... More
028 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members where ever necessary complete as per Design including cost of material, labor, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)
320
92
29568
... More
029 - Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified KPTCL SR-cost data Sheet Sl no.8
20
3277
65541
... More
030 - Bentonite clay slurry for earthing in 50 Kg Bag
20
386
7728
... More
031 - Supply of LED pole mounting type post top lantern with pressure die cast housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection polycarbonate/ clear glass material, delivering superior light out put Rated life Burning Hours 50000 hours @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5 KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60 Hz application. Compliance to IS 10322/1 EC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001 is to2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Osram make LED Source. LED Post Top Lantern with 35 W 11.7. 3 LED Post Top Lantern with 35/40W
20
10103
202062
... More
032 - Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires
20
207
4158
... More
033 - Wiring for lighting/power circuit using one of FRLS PVC insulted 1.1 kV grade multi strand copper with low conductor resistance 2.5 Sq mm single core wire in open are concealed system of wiring with specified IS-694-1990 and conform into GTP of group
200
36
7350
... More
034 - 201 32.05 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) 287206 KM
0.25
148934
37233.525
... More
035 - Supply and laying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC Inner earth LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, strip thickness and resistivity as per IS-3975 25 Sq mm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm)
0.25
146526
36631.6125
... More
036 - Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved color etc., complete. 16 SWG
20000
-
10000
... More
037 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat. with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.
5.41.1 40 x 40 x 6 mm m
5
320
1601.25
... More
038 - Supplying and fixing hilus plastic sheet 3mm thick with necessary for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws
5500
-
2035
... More
039 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per
IS-13947 65 A Each
1
10648
10648.05
... More
040 - Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.
3
2430
7292.25
... More
041 - Supplying & fixing of Porcelain fuse channel with cut out on
existing wooden/panel using necessary nuts, bolts and washers
3
421
1263.15
... More
042 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit
breaking capacity of 10K and complete wiring as required confirming to IEC 60898
1
851
851.55
... More
043 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit
breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
20
435
8715
... More
044 - Supplying, fixing and wiring Electronic tribrid Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter
1
5990
5990.25
... More
045 - GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg 281674 No 653
1
780
780.15
... More
046 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. 1.17.1 All kinds of soils. Depth up to 1.50 m m
100
275
27510
... More
047 - Supplying and fixing L.T. cast Iron pot heads Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqm
324
331
107503.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%