Urban Development Authority Tender

code04 - As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate

code05 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. 4.6.1Single Arm Bracket with 1000 mm Standard 40/50 mm dia

code06 - Supply of LED Streetlight luminaire with pressure die castaluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polycarbonate material, deliveringsuperior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, maximum light intensity shouldbe between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance ofcomplete luminaire IK08. Power Factor 0.9 withmains, Surge Protection Min 5KV along with Over voltage Overload, short circuit miss-wiring protection. Compatiblefor pole mounting with outer dia of 40mm to 50mm. UniversalVoltage driver to operate wide voltage range from 100V to 270V50 60Hz application. Compliance to IS 10322 IEC 60598,LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease ofmaintenance at the sight site location with minimized minimaltools. LED Light fixture with W System Powerconsumption. LED Efficiency 1301m/w, nominal CRI 75.Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certifiedagency & Design & Development facility certified by ISO9001:2008. Housing with supplier word mark /name shallbe Engraved / Embossing on the die cast housing/ Bodypart. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned 11.8.3 LED Streetlight 70W

code07 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130 1984 and Virgin PVC insulation sheathed suitable for working voltage upto 1100V as per IS 694:2010 2C x 4 mm2

code08 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. I - Single Door ,4 Way SP & N

code09 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP

code10 - Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 63 A 4 pole

code11 - Fuse Wire 52.04 Tinned Copper Fuse Wire, 100 Amps

code12 - GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg

code13 - Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

code14 - Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

code15 - Supplying and fixing Microprocess or based Electronic timer (without contactor ,Din Mounting using necessary bolts ,nuts and washers etc.,.) 3-120 sec setting

code16 - GI/Copper strips 12.58.2 25 x 3 mm GI strip

code17 - Supply of LED Bollard light fitting of W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB, with 2 years Warranty against any manufacturing defect working under standard electrical condition.8W 1 m Height

code18 - Supplying heavy gauge PVC conduit pipe......mm dia..........mm thick confirming to IS2509 with suitable size bends,metal /PVC Junction boxes ,adhesive paste etc.,and running before concreting the slab.The conduit should be tied to the reinforcement rods by using binding wire sand unused ways of junction boxes and pipe ends should be covered using PVC end enclosures ,run with 18SWGGI fish wire wherever necessary 25 mm dia 2 mm thick