Urban Development Authority Tender

CODE04 - Precast Cement Concrete Interlocking Blocks. Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification)(PWD UNI SR 2023-24 vol 3 item no 6.8.1 page no 51)

CODE05 - Kerb Stones. Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 300 x 100 mm size (PWD UNI SR 2023-24 vol 3 item no 8.42.5 page no 74)

CODE06 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (PWD UNI SR 2023-24 vol 1 item no 2.1.3 page no 15)

CODE07 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding(PWD UNI SR 2023-24 vol 2 item no 11.34A page no 86)

CODE08 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD UNI SR 2023-24 vol 2 item no 8.4 page no 48)

CODE09 - Fabricating, supplying and erection of.ms long hot dip Galvanized Octagonal hot dip Pole with BSEN10025 grade S355J Osteel plate for shaft, IS2062 for base plate with door opening arrangements,including suitable boards,Bakelite sheet and MCB sasper IS specifications suitable to withstand the windspeed of 47m/s for.m Polein single section and single joint welded asper IS9595/IS10178AW Shaving dimensions bottom.mm,top.mm with 3mm thick, suitable baseplate and 4Nos of. long J bolts along with template and the Pole shall be hot dip galvanized in sing ledipping with not less than 65 micron as per ASTM A123and153etc.,(excluding foundation) as per drawing appended.6 m - Top 70 mm and Bottom 130 mm dia. (PWD UNI SR V-6 23-24 item no 4.2.4 page no 11 of 105)

CODE10 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 Percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment and impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree/Nichia/Lumileds/Osram make LED Source. LED Streetlight 70W (PWD UNI ele SR 2023-24 vol 6 item no 11.8.3 page no 46 of 105)

CODE11 - Optical Fibre Cable (OFC) and its Accessories. HDPE/PLB Pipe 50/42 mm (PWD UNI ele SR 23-24 V-6 item no 66.04 page no 30 of 81)

CODE12 - Fixing charges of post top/ Gate/ Garden fitting/ LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires. (PWD UNI ele SR 23-24 V-6 item no 13.6 page no 56 of 105)

CODE13 - Supplying & fixing miniature circuitbreakers on existing MCB distribution board susing necessary fixing material sand 'C'Type curve,indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898.6-32 A DP (PWD UNI ele SR 23-24 V-6 item no 5.18.4 page no 17 of 105)

CODE14 - Supplying and fixing angleiron framework fabricate dout of M.S.angle iron.and M.S.Flat.withbolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint.50 x 50 x 6 mm (PWD UNI ele SR 23-24 V-6 item no 5.41.2 page no 20 of 105)

CODE15 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. (PWD UNI ele SR 23-24 V-6 item no.5.30 page no 19 of 105)

CODE16 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m (PWD UNI SR 23-24 V-1 item no.1.17.1 page no 10)

CODE17 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) (

CODE18 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 6 Sqmm, 2 Core, (24 GI Wire - 1.4 mm) (PWD UNI ele SR 23-24 V-6 item no 32.10. page no 13 of 81)

CODE19 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.LT Cable. 2.5 to 25 Sqmm (PWD UNI ele SR 23-24 V-6 item no 21.05. page no 52 of 81)

CODE20 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63 A (PWD UNI ele SR 23-24 V-6 item no 5.7.3. page no 14 of 105)

CODE21 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.