Urban Development Authority Tender

1.4 - Supply and Fixing of Bi Cycle : All tubular steel of 2.5mm thickness are galvanised and zinc dipped. Joints are robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all the sharp edges and burrs. Zinc primer Paint is applied at all the welding paints prior to finishing.All metal parts are powder coated using AKZO nobel - Great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine taht uses a 5% NaCL solution in accordence to IS07227 to speed up corrosion for 3000hrs. Rubber: High Quality grip rubber is used for the handles. Bearings : Maintenence-Free ball bearings. Scope of Delevery :1 Completly preassembelled equipment modules. Maintenance: Maintain according to EN16630 and maintenence guide. Safety: All products must be tested and certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified International Certifiying agency such as IPEMA,TUV, CPSC or SGS only. The GS Mark EN16630 certificates must be in the name of tendering party and not many 3rd Party. All products must clearly display the GS mark has been issued in the EN16630 safety Certificate. Size L*W*H:1110*510*1435. Capacity 1 Person

1.5 - Supply and Fixing of Self Weighted Rower: All tubular steel of 2.5mm thickness are galvanised and zinc dipped. Joints are robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all the sharp edges and burrs. Zinc primer Paint is applied at all the welding paints prior to finishing.All metal parts are powder coated using AKZO nobel - Great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine taht uses a 5% NaCL solution in accordence to IS07227 to speed up corrosion for 3000hrs. Rubber: High Quality grip rubber is used for the handles. Bearings : Maintenence-Free ball bearings. Scope of Delevery :1 Completly preassembelled equipment modules. Maintenance: Maintain according to EN16630 and maintenence guide. Safety: All products must be tested and certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified International Certifiying agency such as IPEMA,TUV, CPSC or SGS only. The GS Mark EN16630 certificates must be in the name of tendering party and not many 3rd Party. All products must clearly display the GS mark has been issued in the EN16630 safety Certificate. Size L*W*H:1390*848*1098. Capacity 1 Person

1.6 - Supply and Fixing of Horse Rider: All tubular steel of 2.5mm thickness are galvanised and zinc dipped. Joints are robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all the sharp edges and burrs. Zinc primer Paint is applied at all the welding paints prior to finishing.All metal parts are powder coated using AKZO nobel - Great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine taht uses a 5% NaCL solution in accordence to IS07227 to speed up corrosion for 3000hrs. Rubber: High Quality grip rubber is used for the handles. Bearings : Maintenence-Free ball bearings. Scope of Delevery :1 Completly preassembelled equipment modules. Maintenance: Maintain according to EN16630 and maintenence guide. Safety: All products must be tested and certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified International Certifiying agency such as IPEMA,TUV, CPSC or SGS only. The GS Mark EN16630 certificates must be in the name of tendering party and not many 3rd Party. All products must clearly display the GS mark has been issued in the EN16630 safety Certificate. Size L*W*H:1995*590*1280. Capacity 1 Person

1.7 - Supply and Fixing of Big Sholder Wheel : All tubular steel of 2.5mm thickness are galvanised and zinc dipped. Joints are robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all the sharp edges and burrs. Zinc primer Paint is applied at all the welding paints prior to finishing.All metal parts are powder coated using AKZO nobel - Great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine taht uses a 5% NaCL solution in accordence to IS07227 to speed up corrosion for 3000hrs. Rubber: High Quality grip rubber is used for the handles. Bearings : Maintenence-Free ball bearings. Scope of Delevery :1 Completly preassembelled equipment modules. Maintenance: Maintain according to EN16630 and maintenence guide. Safety: All products must be tested and certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified International Certifiying agency such as IPEMA,TUV, CPSC or SGS only. The GS Mark EN16630 certificates must be in the name of tendering party and not many 3rd Party. All products must clearly display the GS mark has been issued in the EN16630 safety Certificate. Size L*W*H:825*830*1700. Capacity 1 Person

1.8 - Supply and Fixing of HD Health Walker: All tubular steel of 2.5mm thickness are galvanised and zinc dipped. Joints are robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all the sharp edges and burrs. Zinc primer Paint is applied at all the welding paints prior to finishing.All metal parts are powder coated using AKZO nobel - Great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine taht uses a 5% NaCL solution in accordence to IS07227 to speed up corrosion for 3000hrs. Rubber: High Quality grip rubber is used for the handles. Bearings : Maintenence-Free ball bearings. Scope of Delevery :1 Completly preassembelled equipment modules. Maintenance: Maintain according to EN16630 and maintenence guide. Safety: All products must be tested and certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified International Certifiying agency such as IPEMA,TUV, CPSC or SGS only. The GS Mark EN16630 certificates must be in the name of tendering party and not many 3rd Party. All products must clearly display the GS mark has been issued in the EN16630 safety Certificate. Size L*W*H:1070*615*. Capacity 1 Person

1.9 - Supply and Fixing of HD Health Walker: All tubular steel of 2.5mm thickness are galvanised and zinc dipped. Joints are robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all the sharp edges and burrs. Zinc primer Paint is applied at all the welding paints prior to finishing.All metal parts are powder coated using AKZO nobel - Great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine taht uses a 5% NaCL solution in accordence to IS07227 to speed up corrosion for 3000hrs. Rubber: High Quality grip rubber is used for the handles. Bearings : Maintenence-Free ball bearings. Scope of Delevery :1 Completly preassembelled equipment modules. Maintenance: Maintain according to EN16630 and maintenence guide. Safety: All products must be tested and certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified International Certifiying agency such as IPEMA,TUV, CPSC or SGS only. The GS Mark EN16630 certificates must be in the name of tendering party and not many 3rd Party. All products must clearly display the GS mark has been issued in the EN16630 safety Certificate. Size L*W*H:1070*615*. Capacity 1 Person

1.12 - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.

3.6 - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

2.1.3 - CHAPTER 2 CONCRETE WORKS Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates.

2.4.2 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

4.22 - Construction of footpath/separator by providing a 150 mm compacted granular sub base as per clause 401 and 25 mm thick cement concrete grade M15, over laid with pre-cast concrete tiles in cement mortar 1:3 including provision of all drainage arrangements but excluding kerb channel.

9.6 - Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)

11.16.1 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

8.22 - Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808

8.34.2 - Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

8.44 - Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge