Urban Development Authority Tender

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.m(Volume 3 P.no.15.it.no.3.7) 2021-22nd PWD UNI SR

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m (Volume 1 P.no.8.it.no.1.14.1) 2021-22nd PWD UNI SR

Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (Volume 1 P.no. 15, I.No. 2.1.3) PWD SR 2021-22

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (Volume 2 P.no.09. it.no.5.4) 2021-22nd PWD UNI SR

M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (KPWD SR 2021-22 shivamogga circle (Volume 1 P.no.15.it.no.2.2.1.1) 2021-22nd PWD UNI SR

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding(Volume 2 P.no. 85, I.No. 11.34A) 2021-22nd PWD UNI SR

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge..( Volume 2 P.no.48.it.no.8.41) 2021-22nd PWD UNI SR

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600x300x100 mm Kerb Stone(Volume 3 P.no. 146, I.No. 6.6) PWD SR 2021-22nd

Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (Volume 3 P.no. 24, I.No. 4.27) 2021-22nd PWD UNI SR

Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per m2 over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level , including cost of materials, labour and Usage charges of machinery complete as per specifications. (Volume 2, P.no. 64, I.No. 9.31) 2021-22nd PWD UNI SR

Supply and erection of 14 Feet Height Street Light Pole 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height dia 95 mm cast iron decorative round pedestal as per design weighing not less than 37Kgs, the pedestal shall be fitted with Class 'C' G.I.Pipe 7 Feet height 75 mm outer dia and 7 feet height top piece outer dia of 65 mm fixed by measure of threading/welding/coupling complete. (excluding foundation). (P.no.7 , I.No. 4.3) 2021-22nd PWD UNI Ele SR

Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light outputRated life Burning Hrs 50000 hr@ Lumen Maintenance of 70%, CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor>0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/1 EC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Post Top Lantern with 35W (PWD Ele SR 2021-22, (Volume 1 P.no.35 , I.No. 11.7.2) 2021-22nd PWD UNI Ele SR

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975. do -6.4.2 -do - 4 core 10 sqmm(KPWD Ele SR-19/20 I.no-6.4.2 P.no-40)

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975. - do - 3.5 core 35 sqmm (KPWD Ele SR-19/20 I.no-6.4.6 P.no-40)

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench/duct. 6 sqmm to 16 sqmm (KPWD Elect SR-19/20 I. No. 6.5.1, Pg:41)

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench/duct. 25 sqmm to 75 sqmm (KPWD Elect SR-19/20 I. No. 6.5.2, Pg:41)

UG Cable Glands: Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only). 19/20mm Dia (KPWD Ele SR-19/20 I.no-6.11.1 P.no-40)

UG Cable Glands: Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only). 45mm Dia (KPWD Ele SR-19/20 I.no-6.11.4 P.no-40)

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 40mm (KPWD Ele SR-19/20 I.no-6.11.1 P.no-40)

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading atbothdestinations and rolling and lowering intotrenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : (Volume-4, 21-22 item no 1.1 P.no 121) PWD UNI BWSSB SR

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) (KPWD Ele SR-19/20 I.no-6.6.1 P.no-41)

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. - 6.17.6 - 16 sqmm (As per KPWD Ele SR- 19/20 I.No-6.17.6, P.no. 43)

Earthing Conductor: Supplying and running GI conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc GI WIRE 8 SWG (KPWD Ele SR-19/20 I.no-6.18.1 P.no-43)

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32Amps TPN (KPWD Ele SR-22/23 I.no-5.17.7 P.no-13)

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board.63 Amps 4 pole (KPWD Ele SR-22/23 I.no-5.19.10, P.no-13)

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.100Amps 4x30x6mm Aluminium Strips (KPWD Ele SR-22/23 I.no-5.40.1 P.no-15)

Control Panel: Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.14 SWG. 40*40*20 (KPWD Ele SR-2022-23 I.no-5.42.1 P.no-15)

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. - 6.17.9 - 50 sqmm Long Barrel (As per KPWD Ele SR- 19/20 I.No-6.17.9, P.no. 43)

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.40x40x6mm (KPWD Ele SR-22/23 I.no-5.41.1 P.no-15)

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. 3phase (KPWD Ele SR-22/23 I.no-5.48 P.no-16)

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. - 5.13.2 - 40 Amps (KPWD Ele SR-22/23 I.no-5.13.2 P.no-11)

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. (KPWD Ele SR-22/23 I.no-5.30 P.no-14)